|
| 1 | Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 2 | M&L Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 3 | Dismantling wall and ceiling boards ( fibre, pulp, insulation etc or insulation boards/ slabs/ blankets any thickness including cover filletts complete all as specified and directed. |
| 4 | S&F asbestos cement building cement building board 4mm thick size 595x595mm with decorative finish fixed to GI powder coated snap grid frame work with screw in ceiling complete all as specified and directed. |
| 5 | M&L for GI powder coated snap grid frame work for false ceiling of approved (ISI marked) make fixed to galvanised iron steel angle grid 600x600mm size suspended system fixed to GI framed work with main runner (32x24x6.5)mm cross tee (27x24x2.5)mm and moulding (19x19)mm of approved make and section as specified in SSR Part II with suitable hook/fasteners and GI/aluminium suspenders not less than 4mm dia upto 1200mm length @ 1.00m C/C minimum. ceiling system is to be fixed in water level without any sag including ceiling cleats made out of GI flat iron 40x3mm size 60mm long and expansion hold fastner 12.5 mm dia 40mm long complete all as specified and directed. |
| 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 7 | M & L for glazed ceramic coloured tiles joint free of size 350x250 x 7 /450x350x7mm (Ist quality/Premium quality), in vertical surfaces such as riser of steps, skirting, dado and pillar, over and including rendering 10mm thick plastering as bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 8 | M&L for non-skid coloured ceramic tiles (1st quality/ premium quality) 7 to 8mm thick, (square/rectangular) area of each tile exc 0 .11 Sqm but not exc 0.18Sqm as in floors set and jointed in neat cement slurry and pointed in coloured or white cement to match the colour of tiles as in floor over 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 9 | M&L for 10 mm thick Vitrified ceramic tiles, dark shade double charged (square/recangular) area of each tile exceeding 0.36 Sqm but not exceeding 0.42 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of 15 mm thick in CM (1:6) for laying floor finishes complete all as specified and directed. |
| 10 | M&L for 10 mm thick Vitrified ceramic tiles, dark shade double charged (square/recangular) area of each tile exceeding 0.42 Sqm but not exceeding 0.85sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of 15 mm thick in CM (1:6) for laying floor finishes complete all as specified and directed. |
| 11 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with incl 15mm thick screed bed in CM 1:6 laid jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing all complete as specified and directed. |
| 12 | Demolition of cement concrete in ground floor and paving of any thickness (below or above ground) complete all as specified and directed. |
| 13 | M&L for 75mm thick PCC(1:3:6) type C2 using 40mm graded stone aggregate as in sub base of floor etc including foam work complete all as specified and directed. |
| 14 | M&L for PCC 1:2:4 type B-1 ( 20mm graded stone agg) 50 mm thick as in floor,coping etc including foam work complete all as specified and directed. |
| 15 | M&L for 25 mm thick sand cushioning laid dry to the profile under interlocking block complete all as specified and as directed. |
| 16 | M&L for machine pressed precast concrete interlocking paver block of approved shape and size of 60mm thickness,with minimum compressive strength of 35N/sqmm (M-35 grade) without correction factor for chamfering,made in rubber moulds with 0.50mm thick scratch proof lacquer coating on top surface,with grey cement and pigment complete all as specified and directed. |
| 17 | M&L 20-25mm thick plastic coated coloured chequered tiles,size of tile is 20cmx20cmx25cm and incl 15mm thick screed bed in CM (1:6) of approved colour and pointing with grey cement and pigment complete all as specified and directed. Made in rubber moulds with 0.50mm thick scratch proof lacquer coating on top surface. |
| 18 | M&Lfor outdoor Heavy duty coloured vitrified paving tiles ,textured surfaces with high skid resistance ,scratch resistance,impact resistant,joint free(edge cut) of size 600mm x 600mm x 8-10mm thick as in floor etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6,set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed.. Please Enable Macros to View BoQ information SCHEDULE OF CREDIT 1. All worn out/unserviceable materials/items which will be obtained from different items of Sch `A’/ BOQ (as mentioned above) during replacement work, shall become contractor’s property and amount of credit shall be recovered from the contractor's RAR & final bill as and when payments are submitted. These materials shall be allowed to be removed from works site only after credit amount for the same is recovered from the contractor’s payment. Items not covered under this Schedule shall become the property of department and the same shall be returned/ deposited by the contractor at MES store yard without any extra cost to department/ government and all materials which are credited to the contractor, shall be recorded in MB 2. The contractor shall have no claim regarding fixation of credit rates in this schedule and no rebate on \\"Schedule of credit\\" rates/ amount shall be accepted. However contractor can offer more credit rates/ amount. 3. The total credit amount may vary as per execution of work above different items involved in this credit schedule. 4. The quantities given in column 4 are provisional and same shall be measured and paid based on actual quantities obtained against relevant items of Schedule ‘A’/ BOQ. These materials shall not be reused/ reincorporated in the work except where specified. 5. The measurements of dismantled materials shall be the gross quantity obtained and not the net quantity considered for payment in schedule. The old and unserviceable materials to be retrieved from taking down/demolition/dismantling etc are considered in schedule of credit. No claim of contractor with regard to quality/position of old materials shall be entertained Srl No Description of item Qty Unit Assessed rate by department Remarks Rate in (Rs) Amount in (Rs) |
| 19 | M&Lfor outdoor Heavy duty coloured vitrified paving tiles ,textured surfaces with high skid resistance ,scratch resistance,impact resistant,joint free(edge cut) of size 600mm x 600mm x 8-10mm thick as in floor etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6,set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed.. Please Enable Macros to View BoQ information SCHEDULE OF CREDIT 1. All worn out/unserviceable materials/items which will be obtained from different items of Sch `A’/ BOQ (as mentioned above) during replacement work, shall become contractor’s property and amount of credit shall be recovered from the contractor's RAR & final bill as and when payments are submitted. These materials shall be allowed to be removed from works site only after credit amount for the same is recovered from the contractor’s payment. Items not covered under this Schedule shall become the property of department and the same shall be returned/ deposited by the contractor at MES store yard without any extra cost to department/ government and all materials which are credited to the contractor, shall be recorded in MB 2. The contractor shall have no claim regarding fixation of credit rates in this schedule and no rebate on \\"Schedule of credit\\" rates/ amount shall be accepted. However contractor can offer more credit rates/ amount. 3. The total credit amount may vary as per execution of work above different items involved in this credit schedule. 4. The quantities given in column 4 are provisional and same shall be measured and paid based on actual quantities obtained against relevant items of Schedule ‘A’/ BOQ. These materials shall not be reused/ reincorporated in the work except where specified. 5. The measurements of dismantled materials shall be the gross quantity obtained and not the net quantity considered for payment in schedule. The old and unserviceable materials to be retrieved from taking down/demolition/dismantling etc are considered in schedule of credit. No claim of contractor with regard to quality/position of old materials shall be entertained Srl No Description of item Qty Unit Assessed rate by department Remarks Rate in (Rs) Amount in (Rs) |
| 20 | Total amount of credit schedule 20950.0 Signature of contractor AGE (Contracts) For ACCEPTING OFFICER |
