Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Excavation work by mechanical means (hydraulic excavator)/ manual in all height and depths and in all kind of soil including saturated soils comprising of pick work, jumper work, pick jumper work, blasting work both in soft and hard rocks, chiseling/ wedging out of rock (where blasting is prohibited) and their intermediate classification of soil , setting out true to the required line, grades, width, cutting and trimming of side slopes as shown in the drawing and if water is met with in the excavation due to springs, seepage, rain and other causes it shall be removed by the suitable diversion pumping or bailling out and excavation shall be kept dry wherever so required by the contractor at his own cost as directed by the Engineer-In-Charge and disposal all surplus excavated soil in acquired width or at an approved dumping site including its stacking leveling dressing including all lead and lifts by head load, mechnical transportation or by any oyher mode of transportation with all cost of labours, machineries and other incidentals to complete the work as per HP PWD specification. Any loss to the public/ private property during the course of execution and disposal of unserviceble meterial shall be the absolute responsibility of the contractor which shall have to be compensated by him in all case. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 2 | Excavation work by mechanical means (hydraulic excavator)/ manual in foundation trenches or drains or overall areas in earth work of all kind of soil such as pick work, jumper work, blasting work, jumper blasting work soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting is prohibited, chiseling or any other mixed variety of soil, including shoring, strutting or bailing out water upto any depth or any height quantum of water including dewatering removal of slush and stacking the serviceable and unserviceable material clear from the edge of excavation and as per direction of Engineer-In-Charge and returning the stacked soil in 15 cm (Fifteen centimetre) layers, when required into plinths, side of foundation etcetera consolidating each deposited layer by ramming watering and then disposing of all excavated earth as directed by the Engineer-In-Charge, within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 3 | Excavating trenches of required width for pipes, cables, etcetera including excavation for sockets, and dressing of sides, ramming of bottoms, upto any depth including getting out the excavated soil, then returning the soil as required, in layers not exceeding 20cm (Twenty centimetre) in depth, including consolidating each deposited layer by ramming, watering, etcetera and disposing of surplus materials/excavated soil as per specification, approved drawing, design, specification and as per the entire satisfaction of Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. . |
| 4 | Consolidation of sub grade with Road Roller 8-10 (eight - ten) Tonne, including making good the undulation etcetera with earth or quarry soil etcetera and rerolling the sub-grade completed as per HP.PWD specifications including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 5 | Providing and construction of granular sub-base 125mm (one hundered twenty five milimeters) compacted thickness by providing well graded materials as per table 400.1 spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel roller 80-100 (Eighty-hundred) kN static roller to achieve the desired density, complete as per MORD Technical Specification section 400 for grading-I material, including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 6 | Supplying and filling in plinth with sand under floors,including watering, ramming, consolidating and dressing complete including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 7 | Providing & Filling in plinth with hard stone under floors, including watering, ramming, consolidating and dressing complete including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 8 | Providing and filling with stone boulder behind retaining walls of selected hard stone complete including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 9 | Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (One cement isto four sand isto eight graded stone aggregate 40mm (Forty millimetre) nominal size) and curing complete excluding cost of form work in Retaining wall/return wall/ breast wall and foundation & plinth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 10 | Providing and laying mechanically mixed and vibrated plain cement concrete 1:3:6 (One cement isto three sand isto six graded stone aggregate 40mm (Forty millimetre) nominal size) and curing complete excluding cost of form work in Retaining wall/return wall/ breast wall and foundation and plinth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 11 | Providing and laying in position machine batched and machine mixed cement concrete work of grade M-20 (Twenty) design mix to obtain the minimum compressive strength of 20N/mm square (Twenty newton per square millimetre) with cement contents not less than @ 320 Kilogram/Cubic metres (at the rate Three hundred twenty kilogram per Per Cubic metre) or as per approved design mix. All works upto plinth level to give a smooth surfaces machanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.. |
| 12 | Providing and laying in position machine batched and machine mixed cement concrete work of grade M-25 (M-Twenty five) design mix to obtain the minimum compressive strength of 25N/mm2 (Twenty five newton per square millimetre) with cement contents not less than @ 360 Per Kilogram/Per cubic metre (at the rate Three hundered sixty kilogram per cubic metre) or as per approved design mix. All works upto level to give a smooth surfaces machanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.. |
| 13 | Providing and laying in position machine batched and machine mixed cement concrete work of grade M-25 (M-Twenty five) design mix to obtain the minimum compressive strength of 25N/mm2 (Twenty five newton per square millimetre) with cement contents not less than @ 360 Per Kilogram/Per cubic metre (at the rate Three hundered sixty kilogram per cubic metre) or as per approved design mix. All works above plinth level to give a smooth surfaces machanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.. |
| 14 | Providing plinth protection with 50 mm (Fifty millimetres) thick interlocking paver blocks of M -30 (M-thirty) grade of NTC Unistpone/Allantic with 23cm (Twenty three centimetres) diametre Half round stone ware pipe for drainage purpose laid over 25cm (twenty five centimetres) thick cement concrete 1:4:8 (One cement isto four sand isto eight graded) stone aggregate bedding complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 15 | Providing and laying 110mm (one hundered ten millimetre) diametre with working pressure not less than 4.5 Per Kilogram/cm2 (four point zero five kilogram per centimetre square) ISI marked PVC pipe of Finolex /Relpipe (Reliance) Vectus weep holes in brick masonry/stone masonry, plain reinforced concrete, Abutments, Wing walls, Return walls and retaining/breast walls extended through the full width of the structure with slope I(V) : 20(H) (One vertical isto Twenty Horizontal) towards draining face complete as per drawing and MORD technical specification section 700 and 1200 and as per direction of Engineer-In-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkhana, toll tax, GST and any other taxes imposed by the Government. |
| 16 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation footings, bases of columns and mass concrete or other similar works including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, entire satisfaction and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 17 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings balconies and access platform or other similar works for upto plinth and all floors level including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 18 | Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres),so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced and plain concrete work in stairs cases with slopping or stepped soffits, (excluding landing) except spiral staircase upto all floors level complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 19 | Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in Vertical surfaces such as walls (any thickness) partitions and the like including attached pilasters buttresses, plinth and string courses, vertcal fins and other similar works complete upto plinth and all floors level including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 20 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillar, piers, abutments, post and struts square, rectangular, polygonal etcetera for upto plinth and all floors level complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 21 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera; with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams, cantilevers, girders, lintels sides and soffits of beams haunchings, cantilevers, bressumers and lintels for upto plinth and all floors level complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 22 | Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced and plain concrete work in edges of slab and breaks in floors and walls any thickness for upto plinth and all floors level complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 23 | Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuutering, strutting and propping etcetera with wooden battens and ballies for all height/depths and removal of the same for in situ-reinforced concrete & plain concrete work in window sills, cornice and moulding and the like upto all floors level including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 24 | Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres),so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced and Chullah hoods, weather shades, chhajjas, corbels etcetera including edges, upto plinth and all floors level complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 25 | Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies for all height/depths and removal of the same for insitu-reinforced concrete & plain concrete work in Vertical fins and vertical sun breakers etcetera including edges including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 26 | Providing and erection of Tor steel reinforcement Thermo Mechanically Treated bars of grade Fe-550D (five hundered fifty -D ) of Sail / TATA Tiscon/JSW for reinforced cement concrete work including bending, binding, cutting, straightening and placing in position complete including cost of binding wires complete upto all floor levels as per approved specifications, drawing, design, as per entire satsfaction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 27 | Providing, fabrication and erection in position structural steel work of Tata / Sail Steel /Jindal work welded in built up sections, in railling, brackets, gates, gratings framed guard bars, stringers, treads, landings etcetera of stair cases, including use of chequered plate and other similar works wherever required including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etcetera as required and works as per approved make all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 28 | Providing, fabrication and erection in position structural steel work of Tata / Sail /Jindal riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 29 | Providing and fixing 50 mm (Fifty millimetres) diametre SST (Stainless steel) pipe handrail fixed with 35 mm (Thirty five millimetres) diametre stainless steel baluster as per detail in combination of 35 x 35mm (Thirty five into Thirty five millimetres) square and 15/20mm (Fifteen/twenty millimetres) SST pipe baluster knock down railing of KICH hand rail fixed on 10x50mm (Ten into fifty millimetres) stainless steel flat balusters placed at 1200 mm (One thousand two hundred millimetres) centre to centre along with 3 nos (Three Numbers @ 16 mm (Sixteen millimetres) mid rail connected at the side of the baluster with fixtures .The baluster would be fixed on the floor with casted base plate minimum 6mm (six millimetre) thick base plate shall be concealed with suitable S.S. 316 grade cover cap railing made of Hollow tubes, channels, plates etcetara, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etcetera , of required size, on the top of the floor or the side of waist slab with suitable arrangement complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 30 | Providing and fixing 50mm (Fifty millimetres) diametre SST (Stainless steel) pipe Of Kich handrail slip resistant in ramp at two level, having 75cm (Seventy five centimetres) and 90cm (Ninety centimetres) height welded with 25mm (Twenty five millimetres) diametre Stainless steel hollow pipe balusters embedded in cement concrete 60cm (Sixty centimaters) centre to centre and jointing with electrical gas welding at top alongwith hand rail of hollow Stainless steel pipe of 50mm (Fifty millimetres) diametre. It should extend 30cm (Thirty centimetres) beyond top and bottom of the ramp complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 31 | Providing and fixing staircase railing having Readymade Mild Steel Hollow pipe (D-section) 75x 40mm (Seventy five into forty millimetre) rectangular slip resistant handrail with round ends and baluster of 19 x 19mm (Nineteen into ninteen millimetre) Mild Steel solid square bars with combination of 19mm x 6mm (Nineteen millimetre into six millimetre) Mild Steel flat as per detail a clear height of 85cm (eighty five centimetre) at 30cm c/c (thirty five centimetre centre to centre) jonting in cement concrete steps. with applying a coat of red lead paint complete as per approved drawing , design and specifications as per approved drawing, design and specifications, including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 32 | Providing and fixing angle iron frames for doors, windows and ventilators of Tata / Sail/Reliance/Jindal having mild steel channel sections of size 75x40x4mm (seventy five into forty into four millimetre) and Mild Steel angle 25x20x3mm (twenty five into twenty into three millimetre), joints mitred and welded by Mild Steel flat iron 40x12mm (forty into twelve millimetre) to the existing T- iron frame size 25x25x3mm (twenty five into twenty five into three millimetre), and Z-sections as per detail to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 33 | Providing and fixing Double rebate angle iron frames for doors, windows and ventilators of Tata / Sail Reliance /Jindal mild steel channel sections of size 125 x 50 x 4mm (One hundered twenty five into fifty into four millimetre) and Mild Steel end frame 125 x 50 x 4 mm (One hundered twenty five into fifty into four millimetre), joints mitred and welded by Mild Steel flat iron 125 x 4mm (One hundered twenty five into four millimetre) as per detail to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 34 | Providing and fixing Single rebate angle iron door,window,clerestory window frame manufactured from steel iron section of 40X40X5mm, (forty millimetre into forty millimetre into five millimetre) thickness including hinges jamb,lock jamb,beed and if required angle threshold of mild steel angle 50X25 mm (fifty millimetre into twenty five millimetre) welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm (two point five millimetre) thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after pre-treatment of the surface etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 35 | Providing and fixing mild steel brackets made of vertical post 100x50mm (hundered into fifty millimetre), main frame of 50x50x3.0mm, (Fiftty into fifty into three point zero millimetre) distribution member shall be 25x25mm (Twenty five into twenty five millimetre) of, hollow pipe of specified shape, projecting 450mm (four hundered fifty millimetre) outside the wall surface and 450mm (four hundered fifty millimetre) length fixed on wall with 4 (four) numbers, 6mm (six millimetre) diametre expansion hold fasteners, including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etcetra The side M.S flat for brackets & centre piece shall be welded and fixed with M.S. nuts, bolts, & washers of size 25x3mm (twenty five into three millimetre), one bolts on Each side on the both sides of 50x50mm (ifty into fifty millimetre) hollow pipe, total length is 900mm (nine hhundered millimetre) and angular length is 425mm (four hundered twenty five millimetre) including fixing complete as per architectural drawings including carriage of material, within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 36 | Providing and fixing decorative screen in corridor manufactured from 19x19mm (Nineteen into nineteen millimetre) hollow square pipes welded with mild steel hollow sections of size 50mmx50mm (fifty into fifty millimetre), supported on 10 cm (ten centimetre) diametre mild steel hollow pipes. A centre piece shall be of 25 x 3mm (twenty five three millimetre) mild steel flat frame covered with Mild Steel black sheet with flower pattern, made to shape and applying a priming coat of approved steel primer using structural steel complete as per architectural drawings including carriage of material, within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 37 | Providing and fixing first class deodar wood work in frames of doors,windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fasteners of required diametre & length , including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 38 | Providing and fixing 65 x 100mm (sixty five into one hundered millimetre) factory made single extruded WPC (Wood Polymer Composite) solid doors/ windows / Celestory windows & other Frames / Chowkhat approved make of Alstone, Floresta, Ecoste, Century ply, comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with ful body threaded star headed SS screws having minimum frame density of 850 Kilogram/Per Cubic metre (Eight hundered fifty kilogram per Per Cubic metre), screw withdrawal strength of 2200N (Face) & 1100N (Edge), minimum compressive strength of 58N/mm2 (fifty eight newton per millimetre square), modulus of elasticity 900N/mm2 (Nine hundered newton per millimetre square), and resistance to spread of flame of CIass A category with property of being Termite / borer proof, water / moisture proof and Fire retardant and fixed in position with M.S hold fast / lugs / SS dash fasteners of required diametre and length including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 39 | Providing and fixing factory made coloured anodised aluminium work (wooden or other shades) for frame of doors, windows, ventilators and glazed partitions of Jindal / Hindalco aluminium with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS:1285 anodised transparent or dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC-15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleat angle, aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws all complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 40 | Providing and fixing factory made coloured /anodised aluminium work (wooden or other shades) for shutters of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of Jindal /Hindalco approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etcetera Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in charge (Glazing & panel fill to be paid for separately). For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 41 | Providing and fixing 35mm (Thirty millimetre) thick both side commercial phenol bonded ISI Marked flush door shutter of CENTURY/ALPRO/ DURO PLY / GREEN PLY No.1S-2202 decorative type, core of block board construction to be finished with mica lamination of approved shade with frame of 1st (first) class hard wood and well matched ply veneering with vertical grain or cross bands and face veneering on both faces of shutters including black enameled Stainless steel butt hinges with necessary screws etcetera complete as per specifications, drawing and design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 42 | Providing and fixing 35mm (Thirty millimetre) thick factory made Decorative Pre-laminated flush door shutter CENTURY/ALPRO/ DURO PLY / GREEN PLY No.1S-2202 both side commercial i.e non decorated phenol bonded termite resistant & boiling water proof ISI Marked, core of black board construction to be finished with mica lamination of approved shade with frame of 1st (first) class hard wood and well matched ply veneering with vertical grain or cross bands and face veneering on both faces of shutters with vision panel not exceeding 0.10 sqm (zero decimal one square metre) in all type flush including black enameled M.S butt hinges with necessary screws etcetera complete as per specifications, drawing and design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 43 | Providing and fixing 40mm thick second Class deodar wood panelled or panelled and glazed shutters for doors windows and clerestory windows having top rail 100x40mm (One hundered into forty millimetre), style 100x40mm (One hundered into forty millimetre), middle rail 150 x 40mm (One hundered fifty into forty millimetre) and bottom rail shall be 200 x 40mm (Two hundered into forty millimetre) infill with 12mm (Twelve millimetre) thick prelaminated BWP grade MDF board in matt finish ISI marked IS No.12823 of Action Tessa/Green Lam/ Merino Lam/ Kit Ply/ Vista including brass butt hinges with necessary screws and 12x17.5mm (Twelve into seventeen point five millimetre) wooden beading, and lipping/ outer moulding 50x12.5mm (Fifty into twelve point five millimetre), complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 44 | Providing and fixing 40mm (forty millimetre) thick second class deodar wood shutters for door, windows and ventilators having each rail and styles of size of 75x40mm (Seventy five into forty millimetre) with 19 x 12mm (Nineteen into Twelve millimetre) wooden beading, complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 45 | Providing and fixing 40mm (forty millimetre) thick second class deodar wood.wire gauge shutters for door, windows and ventilators having each rail and styles of size of 100x40mm (one hundred into forty millimetre) by using galvanised S.S. wire gauge of I.S. gauge designation 85g. With wire of dia 0.56mm (zero decimal fifty six millimetre) for doors, windows and clerestory windows complete as per specifications, drawing and design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 46 | Providing and fixing to existing door frames 30mm (Thirty millimetre) thick factory made Prelaminated PVC door shutter consisting of frame made out of M.S. tubes of 19 (Nineteen) gauge thickness and size of 19x19mm (Nineteen into nineteen millimetre) for styles and 15x15mm (Fifteen into fifteen millimetre) for top & bottom rails, (Code no 9.120 ) of Rajshri M.S. frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm thick heat moulded PVC \\"C\\" channel of size 30mm (Thirty millimetre) thickness, 70mm (Seventy millimetre) width out of which 50mm (Fifty millimetre) shall be flat and 20mm (Twenty millimetre) shall be tappred in 45 (Forty five) degree angle on either side forming style and 5mm (Five millimetre) thick, 95mm (Ninety five millimetre) wide, PVC sheet out of which 75mm shall be flat and 20mm (Twenty millimetre) shall be tapered in 45o (Forty five degree) on the inner side to form top and bottom rail and 115mm (One hundered fifteen millimetre) wide PVC sheet out of which 75mm (Seventy five millmetre) shall be flat and 20mm (Twenty millimetre) shall be tapered on both side to form lock rail, top, bottom and lock rail shall be provided either side of the panel 10mm (Ten millimetre) thick, 20mm (Twenty millimetre) wide cross PVC sheet be provided as gap insert for top rail and bottom rail paneling of 5mm thick both side PVC Sheet to be fitted in the M.S. frame welded/sealed to the style & rails, joints mitred and jointed with solvent cement adhesive includingfixing of PVC shutter with existing frame with M.S. butt hinges 100x50x1.90mm (One hundered into fifty into One point nine zero millimetre) size with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 47 | Providing and fixing 25mm (Twenty five millimetre) thick one side prelaminated water proof commercial board of green ply/Century Ply / kit ply/Dura ply/Marino exterior/interior grade ISI marked No. 12823 for SDB shutters with 6mm (Six millimetre) thick hard wood edging all round and PGI sheet lining inside of the shutters of approved shade complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 48 | Providing and fixing 25mm (Twenty five millimetre) thick one side prelaminated water proof commercial board of Uniply/Century Ply / Dura ply / kit ply / Green ply / Marino ply exterior / interior grade ISI marked No. 12823 for cupboard shutters with 6mm (Six millimetre) thick hard wood edging of approved shade complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 49 | Providing and fixing 25mm (Twenty five millimetre) thick panelled or panelled & glazed shutters of commercial Board water proof shutters of Century Ply / Dura ply / kit ply / Green ply / Marino ply for cup boards including fixing of 4.0mm (four decimal zero millimetre) thick float glass with beading & stainless steel butt hinges with screws etcetra and finished with 25x6mm (twenty five into six millimetre) hard wood lipping/edging complete as per approved make complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 50 | Providing and fixing 19mm (Nineteen millimetre) thick HDMR board both side laminated with 1mm (One millimetre) thick lamination of Uniply/Century Ply / Dura ply / kit ply / Green ply / Marino ply exterior / interior grade ISI marked No. 12823 for cupboard shutters with 6mm (Six millimetre) thick PVC edging of approved shade complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 51 | Providing and fixing complete box with 19mm (nineteen millimetre) thick one side prelaminated HDMR board in shelves and internal partition shall be made of 19 mm (nineteen millimetre) thick HDMR board of Century Ply / Dura ply / kit ply / Green ply / Marino ply with butt joints & fixing with nails & screws etcetra and back side of cup board shall have 8mm (one millimetre) thick waterproof ply .The shutters from all side also have 6mm (six millimetre) thick hard PVC edges lipping all round as per approved make complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 52 | Providing and fixing complete box with 19mm (nineteen millimetre) thick shelves and internal partition shall be made of 19 mm (nineteen millimetre) thick waterproof termit resistant commercial board of Century Ply / Dura ply / kit ply / Green ply / Marino ply with butt joints & fixing with nails & screws etcetra and back side of cup board shall have 8mm (Eight millimetre) thick waterproof ply .The shutters from all side also have 6mm (six millimetre) thick hard wood edges / lipping all round been mix fnished both side with 1 mm (one millimetre) thick lemination of as per approved make complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 53 | Providing and fixing 19mm (nineteen millimetre) thick water proof termitc resistant commercial board of Century Ply / Dura ply / kit ply / Green ply / Marino ply in shelves/box for cup board with butt joints & fixing with nails & screws etcetra as per approved make complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 54 | Providing and tixing 18mm (eighteen millimetre) thick factory made singIe extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board Iaminated with PVC foil of mininum 14 (fourteen) micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc . of required sizes comprising of virgin polymer of K value 58 to 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum (six hundred fifty kilogram per cubic metre) and screw withdrawaI strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 (eight hundred fifty newton per millimetre square) and resistance to spread of flame of Class A category with property of being Termite or borer proof, water or moisture proof and Fire retardant. WPC to be laminated with PVC foil of minimum 14 (fourteen) microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunI‹ S.S screws, complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 55 | Providing and fixing water proof 8.0mm (eight millimetre) thick ply of standard quality ISI mark of Uniply/Green ply/Kit ply/Marino ply and approved shade and colour in panelling & wall linning including mitring at junctions, butt jointing and nails complete including frame work of 50x31mm (fifty into thirty one millimetre) soft wood grid frame work at 600 mm C/C (six hundred millimetre centre to centre) of paneling, having approved make complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 56 | Providing and fixing 1.00mm (one millimetre) thick colored & decorative high pressure laminated sheet of Century Ply/ Green Ply/Action Tessa/Marino Ply of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S,including cost of adhesive of approved quality complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 57 | Providing and fixing 1st (first) class deodar wood plain square edged cover fillets (beading) 50mmx25mm (fifty millimetre into twenty five millimetre) section, with wood screws in ceiling and lining including mitring at junction complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 58 | Providing and fixing first class deodar wood 12mm (Twelve millimetre) thick and 100mm (Hundered millimetre) wide pelmet and brackets including fixing with 25x3mm (Twenty five into three millimetre) mild steel flat 10cm (Ten centimetre) long and plugs etcetra all complete including entire carriage of materials within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 59 | Providing and fixing aluminum U beading 2.5mm (two decimal five millimetre) thick of required size to Pre-laminated/ flush door shutter, including fixing and carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 60 | Providing and fixing 8 mm (eight millimetre) thickness (weight not less than 20.00 kg/ sqm) (Twenty point zero zero kilogram per sqaure metre) toughened Glass of Modi Guard / Saint Gobain / AIS / Atul / Gold Plus in door, window, ventilator shutters and partitions etcetera with beading etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 61 | Providing and fixing 6.0 mm (six milimetre) thick toughened glass panes (weight not less than 15.00 Kilogram/ Square Metre) (Fifteen point zero zero kilogram per sqaure metre) of Modi Guard/Saint Gobain/AIS/Atul/Gold Plus in door, window, ventilator shutters and partitions etcetera with EPDM / neoprene gasket etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 62 | Providing and fixing 5.0mm (Five millimetre) thickness float glass panes (weight not less than 12.5 Kilogram/ Square metre) (Twelve point five kilogram per sqaure metre)of Modi Guard / Saint Gobain / AIS / Atul / Gold Plus in door, window, ventilator shutters and partitions etcetera with EPDM rubber / neoprene gasket etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 63 | Providing and fixing hermetically sealed double glass units 6 mm (Six millimetre) thickness (weight not less than 15.00 kg/ sqm) (Fifteen point zero zero kilogram per sqaure metre) float Glass of Modi Guard / Saint Gobain / AIS / Atul / Gold Plus in door, window, ventilator shutters and partitions etcetera both side, having 12 mm (twelve millimetere) air gap filled with argon gas, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etcetra complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 64 | Providing and fixing 5.0mm (Five millimetre) thick froasted glass panes (weight not less than 12.5 Kilogram/ Square metre) (Twelve point five kilogram per sqaure metre) Glass panes of Modi Guard / Saint Gobain / AIS / Atul / Gold Plus in door, window, ventilator shutters and partitions etcetera with EPDM rubber / neoprene gasket etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 65 | Providing and fixing 12mm (Twelve milimetres) thick (both Side ) prelaminated water proof particle board in matt finish flat pressed three layer or graded wood particle board conforming to IS: 12823 of Action Tesa / Century / Greenlam / Merinolam / Kitlam / Vista of approved shade Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etcetera complete as per architectural drawings and directions of engineer- in-charge Prelaminated particle board with decorative lamination on one side and balancing lamination on other sidecomplete as per direction Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. |
| 66 | Providing and fixing Fly proof stainless steel grade 304 (three hundered four) wire guage with 0.5mm (Zero point five millimetres) diametre wire and 1.4mm (One point four millimetres) wide aperture for doors windows and clerestory windows with necessary screws complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 67 | Providing and fixing M.S. (Mild steel) grills of require pattern in wooden/steel frames of windows etcetera with 12 x 6mm (Twelve into six millimetre)Mild Steel Flats in combination with 10 x 10 (Ten into Ten millimetre)mm square bars with round headed bolts and nuts or by screws complete all as per Drawing and Techanical Specifications including entire carriage of materials within all leads, lifts and other incidentals, as per approved and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 68 | Providing and fixing 8mm (Eight millimetre) thick anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved make (Hidalco/Jindal) and as per approved design/pattern,with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm (at the rate two hundered millimetre) centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete at all levels including entire carriage of material upto all leads, lifts and other incidentals and further as per the direction and entire satisfaction of Engineer-In-Charge.The rate is inclusive of octroi, royality, Malkhana, toll tax, GST or other taxes imposed by the Government. |
| 69 | Providing and fixing 0.60 mm (Zero point sixty millimetres) thick prepainted steel sheet (ISI Marked-Z 120) of Tata Durashine / Sail / Reliance / Jindals steels, in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) diametre with prepainted limpet and rubber washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 70 | Providing and fixing factory made ridges or hips having proper gola shape 60 cm (Sixty centimetres) overall with 0.60 mm (Zero point sixty millimetres) thick prepainted steel sheets of Tata Durashine / Sail / Reliance / Jindals steels in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating fixing with prepainted iron J or L hooks, bolts & nuts 6mm (Six millimetres) dia & prepainted G.I. limpet and bitumen washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 71 | Providing and fixing valley 90cm (Ninety centimetres) overall 0.60mm (Zero point sixty millimetres) thick prepainted steel sheet of Tata Durashine / Sail / Reliance / Jindals steels in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetres) dia with prepainted G.I. limpet and bitumen washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 72 | Providing and fixing flushing 38 cm (Thirty eight centimetres) overall with 0.60 mm (Zero point sixty millimetres) thick prepainted sheet of Tata Durashine / Sail / Reliance / Jindals steels in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating and back coat of polyester of 5 microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetres) diameter & prepainted G.I. limpet & bitumen washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 73 | Providing and fixing 30cm (Thirty Centimetre) wide 25cm (Twenty five centimetre) deep 0.60mm (Zero point six zero millimetres) thick prepainted plain P.G.I. sheet gutter of Tata / Sail having dome shape grating fixed with bolts, nuts and washers etcetera including making necessary connections with rain water pipe complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 74 | Providing and fixing M.S. B.P. sheet 2.0mm (Two point zero millimetres) thick eaves board/facia/ soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-Incharge (Base members of steel work shall be measured and paid separately) including fixing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 75 | Providing and fixing 600x600x6mm (six hundered into six hundered into six millimetre) Aluminium Composite Panel ceiling of Alstone,Aludecor,Eurobond, Alstrong with pre-painted GI channel framing @600mm (at the rate six hundred millimetre) centre to centre with suitable screw complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 76 | Providing and fixing 600x600x16 mm (Six hundred into six hundred into sixteen millimetres) Dune RH 99 tiles of Armstrong / mineral fibre false ceiling tiles of Gyproc/600x600x15 (Six hundred into six hundred into fifteen) ceres soft fiber tiles of Dexune & with wood wool backing 40mm (Forty millimetres) thick layer and fix with power coated T-Grid work @ 600 (Six hundred) centre to centre in combination with 150x12mm (One hundred fifty into twelve millimetre) thick RAI wood border as per pettern complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 77 | Providing and fixing wall Paneling with Acoustical panels of 600x1200x20 mm (ssix hundred intom one thousand two hundred into twenty millimetre) of dexune Acoustical /Himalayan Acoustical panel on the 'W' profile 0.55 mm (zero decimal fifty five millimetre) thick having a knurled web of 51.55 mm (fifty one decimal fifty five millimetre) and two flanges of 26 mm (twenty six millimetre) each with lips of 10.55 mm (ten decimal fifty five millimetre), placed @ 610 mm C/C (at the rate six hundred ten millimetre centre to centre) in perimeter channel having one flange of 20 mm (twenty millimetre) and another flange of 30 mm (thirty millimetre) with thickness of 0.55 mm (zero decimal fifty five millimetre) and web of length 27 mm. Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully threaded self-tapping dry wall screws. Board is fixed to the 'W' profile with 25 mm countersunk ribbed head screws @ 200 mm C/C, (at the rate two hundred millimetre centre to centre) all complete as per the drawing & directions of engineer-incharge, the joints of the boards are finished with specially formulated jointing compound and 48 mm (forty millimetre) wide jointing tape to provide seamless finish. Including frame work with G.I section chanel complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 78 | Providing and fixing full height wall panelling of 8mm (Eight millimetre) thick water proof/termite resistant teak ply conforming to IS:13958-1994 including providing and fixing to frame work made of 50mm x 31mm (Fifty into thirty one millimetre) soft wood frame work at 600mm (Six hundered) centre to centre with Decotative teak wood beading over teak ply of size 25x12mm (Twenty five into twelve millimetre) having moulding on both side cornic/Edging on top pf paneling to be finished with 55x30mm (Fifty five into thirty millimetre) teak wood beading complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 79 | Providing and construction of 30cm (Thirty Centimetre) thick cavity wall of first class masonary brick work with common burnt clay machine moulded modular bricks of class designation 11.5 (Eleven point five) centimetre thick exposed brickwork at outer side including making horizontal and vertical grooves 12mm (twelve millimetre) wide 12 mm (twelve millimetre) deep, complete in cement mortar 1:4 (one cement isto four coarse sand) with for forming cavity 7cm (Seven centimetre) wide with necessary weep and vent holes including use of cores and cost of providing and fixing bitumastic coated mild steel ties 300mm (three hundered millimetre) long of 25x3mm (twenty five into three millimetre) section at not less than (3 three) ties per Square metre and construction of 11.5 (Eleven point five millimetre) thick second class bricks on inetrnal sides of class designation 7.5 (seven point five) complete the measurement of wall faces only one side will be considered for payment) as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 80 | Providing and construction of 30cm (thirty centimetre) thick Cavity wall second class common burnt clay building bricks with 7cm (Seven centimetre) in wide cavity and consisting 11.5 cm ( Eleven decimal five centimetre) thick inner & outer wall laid in Cement mortar 1:4 (One cement isto four sand) and strength with hoop iron and bituminious coated cross ties including making weep hole and vent pipe complete 2 Nos. (two numbers ) 6/8 ( six oblique eight ) width brass in Z- shape crossing each other shall be provided at the interval 90-100 cm ( ninety to hundered centimetre) length horizontal and vertical in cavity wall and curing complete (The mesurement of wall faces only one side will be considered for payment) complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 81 | Providing and laying of brick work using Second class common burnt clay building bricks in super-structure upto all floor level in cement mortar 1:6 (One cement isto Six sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 82 | Providing and laying of of half brick masonary with second class common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point five) in superstructure above plinth up to all floor level in cement mortar 1:4 (One cement isto four sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 83 | Providing and Laying Second class half brick masonary common burnt clay building bricks with in super structure upto all floor level with necessary weep hole and vent holes including use of cores and cast of providing and fixing bitumastic coated mild steel ties 300mm (Three hundred millimetre) long of 25x3mm ( Twenty five into three millimetre ) Section at not less than 3 (Three ) ties per square metre laid in cement mortar 1:4 ( one sand isto four sand) and strength with hoop iron and bituminious coated (The mesurement of wall faces only one side will be considered for payment), as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government |
| 84 | Providing and construction of random rubble masonry with hard stone in foundation, plinth, retaining or returning/breast walls and other similar works including levelling up with cement concrete 1:6:12 (one cement isto six coarse sand isto twelve graded stone aggregate 20 mm (twenty millimetre) nominal size) upto plinth level with Cement mortar 1:6 (one cement isto six coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 85 | Providing and plastering 15mm (Fifteen millimetres) thick cement plasters in single coat on fair side of brick/concrete/ stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) above plinth level to all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 86 | Providing and plastering 15mm (Fifteen millimetres) thick cement plasters in two coat on rough side of brick/concrete/stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) above plinth level to all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 87 | Providing and plastering 6mm (Six millimetres) thick cement plaster to ceiling in cement mortar 1:3 (One cement isto three sand) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 88 | Providing and plastering 15mm (Fifteen millimetres) thick cement plasters in single coat on fair side of brick/concrete/ stone walls for exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm in girth and finished even and smooth with cement mortar 1:5 (One cement isto five sand) above plinth level to all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 89 | Providing and plastering 12mm (twelve millimetre) thick and 100mm (One hundered millimetre) wide plain cement mortar bands in cement mortar 1:4 (one cement isto four fine sand) surface of brick/concrete/ stone walls for exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 90 | Providing and plastering of 15mm ( fifteen millimetre ) thick Cement plaster in cement mortar 1:5 (one cement isto five sand) on surface of brick/ concrete/ stone walls including forming groove of uniform size from 12x12 mm (twelve into twelve millimetre) and upto 25x15 mm (twenty five into fifteen millimetre) in the top layer of plastered surface as per approved design & pattern having 230mm c/c (two hundered thirty millimetre centre to centre) horizontally equal wideness and finishing of groove complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 91 | Providing and applying 20mm (Twenty millimetre) thick Pattern in cement Plaster with cement Mortar 1:4 (One cement isto Four coarse sand) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 92 | Providing and plastering 15mm (Fifteen millimetres) thick cement plasters in single coat on fair side of brick/concrete/ stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:3 (One cement isto three sand) above plinth level to all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 93 | Providing and laying 600x 600mm (Six hundered into six hundered millimetre), 10mm (ten millimetre thick) Double Charge / Ultra Charge vetrified tiles of of Restile /Nitco /Rak /Kajaria / Orient -Bell /AGL / Simpolo /Johnson / Somany, of approved shade and design, in flooring laid on a bed of 20mm (twenty millimetre) thick cement mortar 1:4 (One cement isto four sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 94 | Providing and laying 600x 600mm (Six hundered into six hundered millimetre), 10mm (ten millimetre thick) Double Charge / Ultra Charge Vitrified tiles of of Restile/Johnson/ Nitco/Kajaria / AGL / Simpolo / Somany /Orient & Bell as per approved shade and design, with water absorption less than 0.08% (Zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm (Twelve millimetre) thick bed of cement mortar 1:3 (One cement isto Three coarse sand), jointing with grey cement slurry @ 3.3 Per Kilogram/ Per square metre (Three point three kilogram Per square metre) including grouting the joint with white cement & matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 95 | Providing and laying 600x600 mm (Six hundred into six hundred millimetres), 10mm (ten millimetre) thick Full body anti skid Matt finish Vitrified tiles of Restile /Nitco / Rak /Kajaria / Orient -Bell /AGL / Simpolo /Johnson / Somany of approved shade and design, in flooring / laid on a bed of 20mm (twenty millimetre) thick cement mortar 1:4 (One cement isto four sand) and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 96 | Providing and laying (600x600x10)mm (Six hundered into Six hundered into ten millimetres) full body matt finished /full body anti skid vitrified tile of of Restile /Nitco / Rak /Kajaria / Orient & Bell /AGL / Simpolo /Johnson / Somany as per approved shade and design of the office and thickness to be specified by manufacturer), with water absorption less than 0.08% (Zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12mm (Twelve millimetre) thick bed of cement mortar 1:3 (One cement isto Three coarse sand) jointing with grey cement slurry @ 3.3 Kilogram/ Square metre (Three point three kilogram per suare metre) including grouting the joint with white cement and matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 97 | Providing and laying 400x400 mm (Four hundered into Four hundered millimetre) with 12mm (twelve millimetre) thickness of matt finished anti skid floor tiles of Nitco /Kajaria / Simpolo /Johnson / Somany/Orient & bell/ AGL/ RAK/ Restile conforming to IS : 15622 of approved shade and design, laid on a bed of 20mm (twenty millimetre) thick cement mortar 1:4 (One cement isto four sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 98 | Providing and laying (400x400x10)mm (Four hundered into Four hundered millimetre into twelve millimetres) full body matt finished / anti skid vitrified tile of of Restile /Nitco / Rak /Kajaria / Orient & Bell /AGL / Simpolo /Johnson / Somany as per approved shade and design of the office and thickness to be specified by manufacturer), with water absorption less than 0.08% (Zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12mm (Twelve millimetre) thick bed of cement mortar 1:3 (One cement isto Three coarse sand) jointing with grey cement slurry @ 3.3 Kilogram/ Square metre (Three point three kilogram per suare metre) including grouting the joint with white cement and matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 99 | Providing and laying 300x300 mm (Three hundred into three hundred millimetres) antiskid ceramic tiles of premium quality of Nitco/AGL / RAK / SIMPOLO / Kajaria / Somany / Orient Bell /Johnson tiles as per approved shade in flooring on 20mm (twenty millimetre) thick cement mortar 1:4 (one cement isto four sand) finished with flush pointing in white cement including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 100 | Providing and laying 300x450mm (Three hundered into four hundered fifty millimetres) into 10mm (ten millimetre) thick Ceramic Glazed wall tiles of Nitco /Kajaria / Simpolo /Johnson / Somany/Orient & bell/ AGL/ RAK/ Restile in skirting risers of steps and dados with cement mortar 1:3 (One cement isto three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 101 | Providing and laying 300x600mm (Three hundred into six hundred millimetres) Ceramic Glazed wall tiles of Nitco /Kajaria / Simpolo /Johnson / Somany/Orient & bell/ AGL/ RAK/ Restile in skirting risers of steps and dados with cement mortar 1:3 (One cement isto three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 102 | Providing and laying 19 mm thick Chima Pink Dark Brown Granite stone flooring in combonation with 10/15cm Lakha red or Black Granite as per pattern and detail laid over 20mm(Twenty millimetre) thickness base of cement mortar 1:3 (One cement isto Three sand) and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing, polishing, etcetra complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 103 | Providing and laying 19mm (Nineteen millimetre) thick Polished Grey / Chima Pink Granite Stone having Semi / Round nosing in work top of Kitchen/ Reception/ Pantry / under counter wash basin and water trough laid over 20mm (average) thickness base of cement mortar 1:3 (One cement isto Three sand) and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 104 | Providing and fixing 19mm (Nineteen milimetres) thick flamed Dark brown Granite in single Piece with uniform Nosing round nosing / edging as per detail gang saw cut, mirror polished, premoulded and prepolished, machine cut in Treads of steps and similar locations of required size, approved shade, colour and texture laid over 20 mm ( twenty milimetres) thick base cement mortar 1:4 (one cement isto four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetera complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 105 | Providing and fixing 19 mm ( Nineteen milimetres) thick polished Grey / Chima pink Granite single slab in risers of steps, skirting dado and pillars laid on with special adhesive over 12 mm (twelve millimetre) thick bed of cement mortar 1:3 (one cement isto three coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade including rubbing and polishing complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 106 | Providing and laying mirror polished 19 mm ( Nineteen milimetres) thick Mirror Polished Kota stone minimum Size 55x55cm (Fifty five into Fifty five centimetre) of uniform colour slab flooring over 20 mm (twenty millimetre) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (One cement isto Four coarse sand) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 107 | Providing and fixing 18mm (Twenty millimetre) thick baroda green marble gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid on 20mm (Twenty millimetre) thick base in cement mortar 1:4 (One cement isto four sand) including jointing with cement mortar 1:2 (One white cement isto two marble dust) with an admixure of pigment to match the shade of the marble including rubbing and polishing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 108 | Providing and laying 25mm (Twenty five millimetre) thick single piece Kota stone slabs in treads of steps with double round nosing laid on 12mm (Twelve millimetre) thick cement mortar 1:3 (One cement isto Three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 109 | Providing and laying Kota stone slabs Single piece 20mm (Twenty millimetre) thick in risers of steps, skirting, dado and pillars laid on 12mm (Twelve millimetre) thick cement mortar 1:3 (One cement isto Three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 110 | Providing & fixing in position 8mm (Eight millimetre) thick HDF (High Density Fibreboard) AC-4, flooring with planks of consists a melamine film coating one side and aluminium oxide coated tissue on another side of plank (Armstrong or its equivalent), issued by Building Materials & Technology Promotion Council (BMTPC). The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4mm thick expanded poly ethylene foam sheets having density 40Kilogram/Cubic metres, over prepared surface with necessary quarter round planks of size 1900mm x 18mm (nineteen hundered into eighteen millimetre) and door reducer of size 1900mm x 44mm (nineteen hundered into forty four millimetre) , wherever required. The wood planks shall have minimum density of 1000 Kg/cum (One thousand kilogram per cubic metre) & minimum Hardness 1000 Kgf (One thousand Kilogram force). with Eco friendly UV coating, all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 111 | Providing and fixing 40mm (forty millimetre) wide 20 mm (twenty millimetre) thick granite stone strip moulding above panneling work / tile work / other similar work, including machine polishing to edge to give high gloss finish etcetra complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 112 | Providing and fixing 20mm (Twenty millimetre) thick white makrana marble work for wall lining (veneer work) including dado, skirting, risers of steps etcetera, in required design and pattern wherever required, stones of different finished surface texture, on 12-15 mm (average) thick cement adhesive 1:1 (One cement isto one adhesive) laid & screwed in position and jointed with white cement slurry @ 3.3kg/sqm (at the rate three point three kilogram Per square metre) including pointing with white cement slurry admixed with pigment of matching shade, including rubbing and polishing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 113 | Providing and laying 50 mm (fifty millimetre) thick cement concrete flooring 1:2:4 (one cement isto twenty sand isto four graded stone aggregate 20 mm (twenty millimetre) nominal size) laid in one layer finished with a floating coat of neat cement as per directions and entire satisfaction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 114 | Providing and laying 300x300x25 mm (Three hundred into three hundred into twenty five millimetres) Labrador Design ( Rainbow Series) tiles of NTC / Unistone / Atlantic in flooring in ramp for person with disability on 20mm (Twenty millimetres) average thick base of cement mortar 1:4 (One cement isto four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish finish as per architect standred design and specification complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 115 | Providing and laying 12mm (twelve millimetre) thick Unistone / NTC / Atlantic stone cladding on wall surface with 12mm ( twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) and jointed with cement slurry to match the stone including scaffolding complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 116 | Providing and laying Heat Resistant Terrace Tiles 300mmx300mmx20mm (Three hundered millimetre into Three hundered millimetre) into (Twenty millimetre) thick with SRI (solar refractive index) > 78 (Sevety Eight) , solar reflection > 0.70 (Zero point Seventy) and initial emittance>0.75 (Zero point Seventy Five) on waterproof and sloped surface of terrace, on 20mm (Twenty millimetre) thick bed of cement mortar 1:4 (One cement isto four coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1 (one cement isto one course sand) , including rubbing and polishing of the surface upto 3 (Three) cuts complete, including providing skirting upto 150mm (One hundred fifty millimetre) height along the parapet walls in the same manner including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 117 | Providing and laying 60mm (Sixty millimetre) thick made cement concrete interlocking paver block of M-50 M-fifty) grade of NTC /Unistone/Atlantic factory made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm (fifty millimetre) thick compacted bed of coarse sand, filling the joints with fine sand etcetera all complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 118 | Providing and laying 80mm (eighty millimetre) thick made cement concrete interlocking paver block of M-50 M-fifty) grade of NTC /Unistone/Atlantic factory made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm (fifty millimetre) thick compacted bed of coarse sand, filling the joints with fine sand etcetera all complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 119 | Providing and laying at or near ground level factory made kerb stone of M-25 (M- Twenty five) grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (One cement isto three coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5.0mm (five millimetre)), including making drainage opening wherever required complete etcetera, including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 120 | Providing and applying Birla / J.K. white wall care putty over plaster surface after thoroughly brushing the surface free from mortar dropings, dust, loose material and other foreign matters, sand papered smooth to give final matt finish to the surface upto floor all level complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 121 | Providing and painting walls with 100% (one hundred percent) premium emulsion of Asian / Dulux / Berger / Nerolac Suraksha paints of approved shade having VOC less than 50 gm/litre (Fifty gram/per litre) and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives for new work (Two or more coats applied @ 1.43 litre/ 10 sqm. (One point forty three litre/per ten square metre) Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm (Zero point ninety litre/per ten square metre) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 122 | Providing and painting two coats wall painting with Plastic emulsion paint of approved brand and manufacture to give an even shade complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 123 | Providing and painting two coats with silicon & acrylic emulsion of Asian Paints/ Dulux /Berger paints/Nerolac Suraksha paints for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for matting the surface smooth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 124 | Providing and painting with acrylic washable emulsion of Asian Paints/ Dulux /Berger paints/Nerolac Suraksha paints for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for matting the surface smooth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 125 | Providing and finishing walls with fine dune / dune finish of NCL Attlek / spectrum / textured wall finish natural grit of heritage having coating thickness 1.5mm (one decimal five millimetre) with one coat of Birla wahite wall care putty textured exterior paint for New work Two or more coats applied @ 3.28 ltr/ 10 sqm (at the rate three decimal two eight litre per ten square metre) over and including priming coat of exterior primer applied @ 2.20kg /10 sqm (at the rate two decimal two zero litre per ten square metre) required shade. as per approved brand complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 126 | Providing and painting walls with weather proof exterior emulsion of Asian / Dulux / Berger / Nerolac Suraksha paints of approved shade having VOC less than 50 gm/litre (Fifty gram/per litre) and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives for new work (Two or more coats applied @ 1.43 litre/ 10 sqm. (One point forty three litre/per ten square metre) Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm (Zero point ninety litre/per ten square metre) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 127 | Providing & finishing surface with Epoxy paint (two or more coats) on steel work at all locations prepared and applied as per approved make of Asian paints / Dulux paints / Nerolac suraksha paints / Berger Paints including preparation of surface, etcetra complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 128 | Providing and painting with oil type wood preservative of (Asian Paints/ Dulux /Berger paints/Nerolac Suraksha paints) for new wood work by applying two or more coats, including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting etcetera complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 129 | Providing and applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matters sand papering and knotting of readymixed paint brushing with white lead for priming of Asian paints / Dulux /Berger paints/Nerolac Suraksha paints complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 130 | Providing and polishing two coats with french polish on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 131 | Providing and painting two coats (including priming coat) on over new wood and wood based surfaces with enamel paint of Nerolac/ Asian brushing to give an even shade including cleaning the surfaces of all dirt, dust andother foreign matter complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 132 | Providing and laying Damp Proof Course 100mm (One hundred millimetre) thick with cement concrete 1:2:4 (one cement isto two sand isto four graded/crushed stone aggregate) 20mm (Twenty millimetre nominal size) and curing complete, as required at site including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 133 | Providing and applying a coat of residual petroleum bitumen of grade VG-10 (Viscosity grade-Ten) of approved quality using 1.70 Kgs. (one decimal seven zero Kilogram) per square metre on Damp Proof Course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil, including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 134 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:i) Ist course of applying cement slurry @ 4.4 kg/sqm (at the rate four decimal four kilogram per square metre) mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.ii) IInd course of 20 mm (twenty millimetre) cement plaster 1:3 (one cement isto three coarse sand) mixedwith water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg per sqm (at the rate one decimal seven kilogram per square metre) of areaiv) IVth course of 400 (four hundred) micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm (one hundred millimetre) wide and pasted to each other with bitumen @ 1.7 kg/sqm (at the rate one decimal seven kilogram per square metre) including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 135 | Providing and laying Dr. Fixit Torch Shield (P-3160-3mm), APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm (three millimetre) thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/Per Square Metre (at the rate zero point fourty litre per square metre) by the same membrane manufactured of density at 25°C, 0.87 - 0.89 Per Kilogram/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etcetera, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/ 5cm (five centimetre) . Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM,D -5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 136 | Treatment of soil under proposed floors in proportion of dilute compound by using 1.0 (one) litre water @ 2.5 (at the rate two decimal five) millilitre chemical emulsion (Imidacloerid 30.5% SC) and using diluted compound @ one litre per hole, 300 mm (three hundred millimetre) and laying of PVC pipes condiuts of approved make (Termi Pores/ Irrigate Pores) apart including drilling 12 mm (twelve millimetre) diameter holes and plugging with cement mortar 1:2 (one cement isto two Coarse sand) to match the floor. The laying of material shall be got done through the authorised applicator of the manufacturer of material including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 137 | Providing and fixing 20mm (twenty millimetre) diametre stainless steel curtain rods of wall thickness 1.25 mm (one decimal two five millimetre) with two brass brackets fixed with brass screws and wooden plugs etcetra complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 138 | Providing and fixing concealed hinges for Steel windows/Ventilators of approved quality for 20mm (twenty millimetre) thick door with stainless steel screws complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 139 | Providing and fixing 125mm (one hundred twenty five millimetres) nominal size double acting spring hinges with necessary brass screws complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 140 | Providing and fixing 125x75x4 mm (one hundred twenty five into seventy five into four millimetre) ISI marked CED coated self closing hinges fitting with as per required colour or shade with necessary SS 304 grade screws etcetra complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 141 | Filling the gap upto 5mm (five millimetre) depth and 5 mm (five millimetre) width in between steel/aluminium/uPVC frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 142 | Providing and fixing 300x16mm (Three hundered into Sixteen millimetres) nominal size bright/matt finished Stainless steel sliding door bolts ISI marked or approved quality & make with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 143 | Providing and fixing 250x16mm (Two hundered fifty into Sixteen millimetres) nominal size bright/matt finished Stainless steel sliding door bolts ISI marked or approved quality & make with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 144 | Providing and fixing 100x16mm (One hundered into Sixteen millimetres) nominal size bright/matt finished Stainless steel sliding door bolts ISI marked or approved quality & make with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 145 | Providing and fixing 250x10mm (Two hundered fifty into Ten millimetres) nominal size bright/matt finished Stainless steel Tower bolts (barrel type), ISI marked or approved quality & make with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 146 | Providing and fixing 100x10mm (One hundered into Ten millimetres) nominal size bright/matt finished Stainless steel Tower bolts (barrel type), ISI marked or approved quality & make with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 147 | Providing and fixing 100x16mm (one hundred into Sixteen millimetres) nominal size coloured anodized aluminium sliding door bolts ISI marked, (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 148 | Providing and fixing 250x16mm (two hundered fifty into Sixteen millimetres) nominal size aluminium sliding door bolts ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 149 | Providing and fixing 300x16mm (three hundred into sixteen millimeters) ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etcetra complete as per HPPWD specifications complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 150 | Providing and fixing 150x10mm (One hundred fifty into ten millimeters) ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etcetra complete as per HPPWD specifications complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 151 | Providing and fixing aluminium 200x10mm (two hundered into Ten millimetres) nominal size Tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera. complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 152 | Providing and fixing aluminium 150x10mm (One hundered fifty into Ten millimetres) nominal size Tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera. complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 153 | Providing and fixing bright finished brass 100 mm (one hundred ten millimetre) mortice latch and lock with 6 (six) levers without handles of approved quality with necessary screws etcetra complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 154 | Providing and fixing bright finished Chromium plated brass 100 x 65mm (one hundered into sixty five millimetre) mortice latch and lock with 6 (six) levers and a pair of lever handles & key provision / arrangement of approved quality with necessary screws etcetra complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 155 | Providing and fixing bright finished cylinderical Chromium plated brass 168 x 75 mm (one hundered sixty eight into seventy five millimetre) mortice latch and lock without key provision of approved quality with necessary screws etcetra complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 156 | Providing and fixing 65x35mm (Sixty five into thirty five milllimetres) special quality bright finished brass cup-board locks or ward robe locks with six levers including necessary screws etcetra (Indian make of approved quality) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 157 | Providing and fixing Double strip (horizontal type) 150mm (one hundred fifty millimetre) size of magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etcetra complete, as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 158 | Providing and fixing powder coated telescopic drawer channels 450 mm (four hundred fifty millimetre) long with necessary screws etcetera complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 159 | Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) etcetera complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 160 | Providing and fixing 256mm (two hundered fifty six millimetre) size of Aluminium Concealed Pull Handle with neceassary screws etcetra all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 161 | Providing and fixing 125x34x24 mm (one hundered twenty five into thirty four into twnety four millimetre) weighing not less than 23 gms (twenty three grams) of bright finished PTMT handles with screws complete as per architectural drawings specifications, design and as per the directions of Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 162 | Providing and fixing bright /matt finished Stainless Steel 304 Grade 125mm (one hundered twenty five millimetre of approved quality & make with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 163 | Providing and fixing bright /matt finished Stainless Steel 304 Grade 300mm (Three hundered millimetre) of approved quality & make with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 164 | Providing and fixing 125mm (One hundered twenty five millimetres) nominal size aluminium Handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etcetera; complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 165 | Providing and fixing 100mm (One hundered millimetres) nominal size aluminium Handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etcetera; complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 166 | Providing and fixing 125mm (One hundered twenty five millimetres) nominal size M.S. Handles ISI marked with necessary screws etcetera; complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 167 | Providing and fixing 100mm (One hundered millimetres) nominal size M.S. Handles ISI marked with necessary screws etcetera; complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 168 | Providing and fixing anodised aluminium hanging floor Twin door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etcetera; complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 169 | Providing and fixing anodised aluminium hanging floor Single door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etcetera; complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 170 | Providing and fixing 250mm (two hundered fifty millimetres) nominal size anodised aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 171 | Providing and fixing Anodised Aluminium Casement stay 150 mm (one hundred fifty millimetre) casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 172 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 Per Kilogram (one hundered twenty five kilogram), for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 173 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 Per Kilogram to 80 Per Kilogram (thirty six kilogram to eighty kilogram) and door width from 701 mm to 1000 mm (seven hundered one millimetre to one thousand millimetre), with double speed adjustment with necessary accessories and screws etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 174 | Providing and fixing 150mm (One hundered fifty millimetres) diametre on wall face PVC rain water pipes of working pressure 4/6 Per Kilogram/cm2 (Four/six kilograms/per centimeters square) ISI marked of Finolex / Relpipe (Reliance)/Vectus including filling the joints with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 175 | Providing and fixing 150mm (One hundered fifty millimetres) nominal bore/diameter Plain bend ISI marked of Finolex / Relpipe (Reliance)/Vectus including fixing with approved adhesive complete. including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 176 | Providing and fixing 150mm (One hundered fifty millimetres) diametre Shoe on wall face PVC rain water pipes working pressure 4/6 K.g/cm2 (Four/six kilogram/per centimetres square) ISI marked of Finolex / Relpipe (Reliance)/Vectus including priming coat, painting and welding etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 177 | Providing and fixing 150mm (One hundered fifty millimetre) diametre PVC clamps ISI marked of Finolex / Relpipe (Reliance)/Vectus approved design to PVC rain water pipe including cost of cutting holes and steel screws, rawal plug and making good the walls etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 178 | Providing and fixing 110mm (One hundred ten millimetre) diametre Finolex/Relpipe (Relience)/Vectus pressure shall not be less than 4 kg/cm2 (four kilogram per centimetre square) PVC Spigot and Socket, waste and ventilating pipe ISI marked including fixing with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 179 | Providing and fixing 150mm (One hundred fifty millimetre) diametre Finolex/Relpipe (Relience)/Vectus pressure shall not be less than 4 kg/cm2 (four kilogram per centimetre square) PVC Spigot and Socket, waste and ventilating pipe ISI marked including fixing with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 180 | Providing and fixing 75mm (Seventy five millimetre) diametre Finolex/Relpipe (Relience)/Vectus pressure shall not be less than 4 kg/cm2 (four kilogram per centimetre square) PVC Spigot and Socket, waste and ventilating pipe ISI marked including fixing with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 181 | Providing and fixing 110mm (One hundred ten millimetre) nominal bore/diameter P.V.C. plain bend of Finolex / Relpipe (Relience) / Vectus conforming to IS No.-14735-99 including filling the joints with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 182 | Providing and fixing 75mm (Seventy five millimetre) nominal bore/diameter P.V.C. plain bend of Finolex / Relpipe (Relience) / Vectus conforming to IS No.-14735-99 including filling the joints with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 183 | Providing and fixing 110mm (One hundred ten millimetre) diametre PVC door bend with oval access door, of Finolex / Relpipe (Relience) / Vectus insertion rubber washer 3 mm (Three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 184 | Providing and fixing 110x75mm (One hundred into seventy five millimetre) nominal size ISI marked P.V.C floor trap of Finolex / Relpipe (Relience) / Vectus of self cleaning design complete including fixing with approved adhesive cost of cutting and making good the walls and floors etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 185 | Providing and fixing 110x90mm (One hundred into ninety millimetre) nominal size ISI marked P.V.C floor trap of Finolex / Relpipe (Relience) / Vectus of self cleaning design complete including fixing with approved adhesive cost of cutting and making good the walls and floors etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 186 | Providing and fixing 150mm (One hundred fifty millimetre) nominal bore/diameter ISI marked PVC collar of Finolex / Relpipe (Relience) / Vectus complete upto all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 187 | Providing and fixing 110mm (One hundred ten millimetre) nominal bore/diameter ISI marked PVC collar of Finolex / Relpipe (Relience) / Vectus complete upto all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 188 | Providing and fixing 150mm (One hundred fifty millimetre) nominal bore/diameter P.V.C clamps of Finolex / Relpipe (Relience) / Vectus ISI marked including finishing with approved design with steel screws and rawal plugs etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 189 | Providing and fixing 110mm (One hundred ten millimetre) nominal bore/diameter P.V.C clamps of Finolex / Relpipe (Relience) / Vectus ISI marked including finishing with approved design with steel screws and rawal plugs etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 190 | Providing and fixing 75mm (Seventy five millimetre) nominal bore/diameter P.V.C cowl of Finolex / Relpipe (Relience) / Vectus ISI marked including finishing with approved design with steel screws and rawal plugs etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 191 | Providing and fixing 90mm (ninety millimetre) nominal bore/diameter P.V.C cowl of Finolex / Relpipe (Relience) / Vectus ISI marked including finishing with approved design with steel screws and rawal plugs etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 192 | Providing and fixing 110mm (One hundred ten millimetre) nominal bore/diameter P.V.C cowl of Finolex / Relpipe (Relience) / Vectus ISI marked including finishing with approved design with steel screws and rawal plugs etcetera. complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 193 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm (three hundred into three hundred millimetre) size (inside) the weight of cover to be not less than 4.50 kg (four point five zero kilogram) and frame to be not less than 2.70 kg (two point seven zero kilogram) as per standard design: 100x100 mm (one hundred into one hundred millimetre) size P type, with common burnt clay F.P.S. (non modular) bricks of class designation 7.5. complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 194 | Providing and fixing white vitreous china half stall urinal Large flat back no 60002 of size 39x37.5 x59 cm (Thirty nine into thirty seven point five into fifty nine centimetre) with white PVC automatic flushing cistern of Hindware/Cera/Jaquar of star white / Snow white shade and as shown in the drawing / as per details with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required single half stall urinals with 10 litre (Ten litre) P.V.C. automatic flushing cistern complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 195 | Providing and fixing 600x300mm (Six hundred into Three hundred millimetres) nominal size of Division Plate for Urinals Hindware /cera/Jaquar of star white / snow white shade and (Heavy duty make ISI marked No- 8931 & 8934) of approved quality and colour complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 196 | Providing and fixing 670x370x795mm, (six hundered seventy into Three hundered seventy into seven hundered Ninety five millimetre) floor mounted, white vitreous china single piece (WC) water closet, double traps syphonic of (Jaguar/Cera)/Somany/Hindware shape, size and pattern as per approval of Engineer-In-Charge, including integrated white vitreous china cistern of capacity 10 (ten) litres with dual flushing system, PP Soft Close Slim Seat Cover, Hinges and set along with 8mm (eight millimetre) diametre C.P pre-installed jet arrangement including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the S trap 220 mm (two hundered twenty millimetre), complete in all respect including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 197 | Providing and fixing Europen water closet of Star SNo 20087(5-10 ) of size 57x35x39cm ( Fifty seven into thirty five into thirty nine centimetre) with PVC flushing cistern (sleek plus) fixed with Jet pressure of Hindware/Cera/ Juguar of star white/snow white shade complete in all respect, water closet (European Type - WC pan) with integral 'p' or 's' trap including jointing the trap with soil pipe in cement mortar 1:1 ( one cement, one sand) (with cistern, seat cover and flush fitting) of approved make (Hindware by Jaguar/Cera) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 198 | Providing and fixing water closet squatting pan (Indian type W.C. pan )White Vitreous china Orissa pattern W.C. pan no 20090 of size 530x410 mm (Five hundred thirty into four hundred ten millimetre) with integral type foot rests with 100 mm (One hundred millimetre) sand cast Iron P or S trap, 10 litre (Ten litre) low level P.V.C. flushing cistern,of Hindware / Cera / Jaquar of star white / Snow white shade and as shown in the drawing / as per details including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 199 | Providing and fixing vitreous china pedestal type/wash down floor mounted Matrix water closet (WC) for specially abled person Cat no. 7011 with size of (740x550x835)mm (Seven hundered forty into five hundered fifty into Eight hundered thirty five millimetre) with supporting arrangement, white colour studio set along with 8mm (eight millimetre) diametre C.P pre-installed jet arrangement, SEAT COVER, Flushing CISTERN 10ltr. (ten litre) capacity and twin flushing valves etc. complete in all respect, water closet (European Type - WC pan) with integral 'p' or 's' trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement, one sand) (with cistern, seat cover and flush fitting) of approved make (Hindware/ Cera/ Jaguar Star white/ Snowhite), complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 200 | Providing and fixing Health faucet ABS with rubbit cleaning system, flexible tube upto 1.25 mtr (one point two five metre) long PVC Flexible tube & ABS wall hook to extended wall mounted type W.C. of quality and make of Continental Series of Jaguar/Classic Series of Hindware/Floral Series of Cera/Vintage Series of Kerovite complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 201 | Providing and fixing 550 x 400 x 860mm (five hundred fifty into four hundred into eight hundred sixty millimetre) wash basin Delta No. 10010 with C.I. brackets, 15 mm (fifteen millimetre) C.P. brass pillar tap, 32 mm (thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin of approved make Hindware/ Cera/ Jaguar Star white/ Snowhite complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 202 | Providing and fixing vitreous China under counter wash basin Garnet No.10080 size 58x43cm (Fifty eight into forty three centimetre) of HINDWARE/CERA/JAQUAR of star white/snow white shade including, 32mm (Thirty two millimetre) C.P. brass waste with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same including fittings complete (mirror to be measured and paid for separately) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 203 | Providing and fixing 510 x 400 x 860mm (five hundred ten into four hundred into eight hundred sixty millimetre) wash basin with C.I. brackets, with 32 mm (thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin of approved make Hindware/ Cera/ Jaguar Star white/ Snowhite complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 204 | Providing and fixing Stainless Steel kitchen sink with drain board of Diamond/Unik/ Preyag big size (610x460)x200 mm (Six hundered ten into four hundred sixty into two hundred millimetre) including C.P. waste with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 205 | Providing and fixing Stainless Steel kitchen sink with drain board of Diamond/Unik/ Preyag big size 1040x510x250 mm (One thousand forty into five hundered ten into two hundered fifty millimetres) including C.P. waste with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 206 | Providing and fixing 15mm (Fifteen millimetre) nominal bore double lever, C.P. brass wall mixer for bath with long headed bib cock and L-bend of continental series of Jaquar/Classic Series of Hindware/Floral Series of Cera/Vintage series of Kerovite Hindon series of Jal / ESS (superior or heavy type) approved quality conforming to IS:8934 including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 207 | Providing and fixing 15mm (Fifteen millimeters) diametre C.P. brass bib tap of conforming to IS:8931 of continental serie of Jaquar/Classic Series of Hindware/Vintage Series of Kerovite/Hindon series of tap of approved quality (superior or heavy type) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 208 | Providing and fixing 15mm (Fifteen millimeters) diametre C.P. brass 98 mm (ninety eight millimetre) long push cock of approved quality and colour of continental serie of Jaquar/Classic Series of Hindware/Vintage Series of Kerovite/Hindon series of Jal complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 209 | Providing and fixing 15mm (Fifteen millimeters) nominal bore, C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms continental serie of Jaquar/Classic Series of Hindware/Vintage Series of Kerovite/Hindon series of Jal including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 210 | Providing and fixing 15mm (Fifteen millimeters) nominal bore, C.P. brass long body double lever bib cock with Mixer for kitchen sink of approved quality conforming to IS standards and weighing not less than 690 gms (Six hundered ninety grams) continental serie of Jaquar/Classic Series of Hindware/Vintage Series of Kerovite/Hindon series of Jal including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 211 | Providing and fixing 15mm (Fifteen millimeters) nominal bore, C.P. brass long nose double lever bib cock bib cock with mixer for wash basin of approved quality conforming to IS standards and weighing not less than 810 gms (Eight hundered ten grams) continental serie of Jaquar/Classic Series of Hindware/Vintage Series of Kerovite/Hindon series of Jal including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 212 | Providing and fixing 15mm (Fifteen millimeter) diametre C.P. brass stop cock (concealed) of standard design and of approved make of continental serie of Jaquar/Classic Series of Hindware/Vintage Series of Kerovite/ Hindon series of Jal conforming to IS:8931 including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 213 | Providing and fixing 32mm (Thirty two millimetre) diametre P.V.C. flexible waste pipe of Finolex / Relpipe (Reliance) /Vectus for sink or wash basin including P.V.C. waste fittings complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 214 | Providing and fixing C. P. Brass overhead shower rose with 15mm (Fifteen millimeters) inlet 100mm (one hundered millimetre) with single flow and shower arm of continental serie of Jaquar/Classic Series of Hindware/Vintage Series of Kerovite/Hindon series of Jal including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 215 | Providing and fixing 25mm (twenty five millimetre) nominal size gun metal gate valve with C.I. wheel of approved quality (screwed end) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 216 | Providing and fixing 15mm (Fifteen millimeters) diametre C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931, continental serie of Jaquar/Classic Series of Hindware/Vintage Series of Kerovite/Hindon series of Jal including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 217 | Providing and fixing 1216 (15mm (fifteen millimetre) OD pipe Polyethelene-Aluminium Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 1545 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C (Eighty degree celcius), including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etcetera with clamps at 1.00 metre (One metre) spacing for concealed works, including cutting chases, testing the joint and making good the wall etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 218 | Providing and fixing 1620 (20mm (Twenty millimetre) OD pipe Polyethelene-Aluminium Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 1545 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C (Eighty degree celcius), including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etcetera with clamps at 1.00 metre (One metre) spacing for concealed works, including cutting chases, testing the joint and making good the wall etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 219 | Providing and fixing 15mm (Fifteen millimetre) diametre to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor complete in all respect including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 220 | Providing and fixing 20mm (Twenty millimetre) diametre to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor complete in all respect including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 221 | Providing and fixing 25mm (Twenty five millimetre) diametre to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor complete in all respect including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 222 | Providing and fixing 600x450mm (Six hundered into four hundered fifty millimeters) bevelled edge mirror of superior glass mounted on 6mm (Six millimeters) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 223 | Providing and fixing 1500x750mm (one thousand five hundered into seven hundered fifty millimetre) beveled edge mirror of superior glass (of approved quality) for public toilet complete with 6 mm (Six millimetres) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 224 | Providing and fixing 600x120x5 mm (Six hundered into one hundered twenty into five millimetre) glass shelf of continental serie of Jaquar/Classic Series of Hindware/Vintage Series of Kerovite/Hindon series of Jal with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40mm (Forty millimetre) long screws, rawl plugs etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 225 | Providing and fixing CP brass soap Dish Holder having length of 138mm (one hundered thirty eight millimetre), breadth 102mm (one hundered two millimetre), height of 75mm (seenty five millimetre) with concealed fitting arrangements, weighing not less than 106 (one hundered six) gms complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 226 | Providing & Fixing in position Aluminium C.P glossy wall mounted 6 (six) pegs hooks rail fixed with C.P. brass screws and rawl plugs etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 227 | Providing and fixing C.P. brass toilet paper Holder including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 228 | Providing and fixing 32mm (Thirty two millimeter) nominal size / diameters M.I. union for wash basin or sink including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 229 | Providing and fixing 32mm (Thirty two millimeter) nominal size C.P. waste and rubber plug complete for sink or wash basin including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 230 | Providing and fixing 100mm (One hundered millimetre) diametre chromium plated grating of superior quality for floor, gully or nahani trap complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 231 | Providing and fixing 8 mm (Eight millimetre) diametre C.P. / S.S. Jet of continental serie of Jaquar/Classic Series of Hindware/Vintage Series of Kerovite/Hindon series of Jal with flexible tube upto 1 metre (One metre) long with S.S. triangular plate to Eureopean type W.C. of approved quality and make as approved complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 232 | Providing and fixing PVC connection pipe ISI marked 45cm (forty five centimeters) long and 15mm (fifteen millimeters) nominal bore with brass unions complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 233 | Providing and fixing 15mm (Fifteen millimeters) nominal bore brass full way valve with wheel of continental serie of Jaquar/Classic Series of Hindware/Vintage Series of Kerovite/Hindon series of Jal complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 234 | Providing and fixing 20mm (twenty millimeters) nominal bore brass full way valve with wheel of continental serie of Jaquar/Classic Series of Hindware/Vintage Series of Kerovite/Hindon series of Jal complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 235 | Providing and fixing 110mm (one hundered ten millimetre) diametre P.V.C single equal branch of Finolex / Relpipe (Relience) / Vectus with insertion rubber washer 3mm (Three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 236 | Providing and fixing 75mm (Seventy five millimetre) diametre P.V.C single equal branch of Finolex / Relpipe (Relience) / Vectus with insertion rubber washer 3mm (Three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 237 | Providing and fixing 150mm (one hundered fifty millimetre) diametre P.V.C single equal branch of Finolex / Relpipe (Relience) / Vectus with insertion rubber washer 3mm (Three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 238 | Providing and fixing 110mm (One hundered ten millimetre) diametre P.V.C double equal branch of Finolex / Relpipe (Relience) / Vectus with insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 239 | Providing and fixing 150mm (one hundered fifty millimetre) diametre P.V.C double equal branch of Finolex / Relpipe (Relience) / Vectus with insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 240 | Providing and fixing 110mm (One hundered ten millimetre) diametre P.V.C plain double equal branch with oval access door, of Finolex / Relpipe (Relience) / Vectus insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 241 | Providing and fixing 150mm (one hundered fifty millimetre) diametre P.V.C plain double equal branch with oval access door, of Finolex / Relpipe (Relience) / Vectus insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 242 | Providing and fixing CP brass towel rail as per model no. FS007103 of Jaquar / Hindware / Cera / Kerovite & Jal with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm (six hundered millimetre) long towel rail with total length of 645 mm (six hundered forty five millimetre), width 78 mm and effective height of 88 mm (eighty eight millimetre), weighing not less than 190 (one hundered ninety) gms complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 243 | Providing and Fixing Charomium plated 40mm (forty millimetres) diametre steel pipe for grab bars at 78cm (seventy eight centimetres) height M.S. plate as per details at the position of the seat and Wash Basin complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 244 | Providing and fixing CP brass towel ring of Jaquar / Hindware / Cera / Kerovite & Jal trapezoidal shape 215 mm (two hundered fifteen millimetre) long, 200 mm (two hundered millimetre) wide with minimum distances of 37 mm (thirty seven millimetre) from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 (eighty eight) gms including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 245 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank of Finolex /Relpile (Reliance) Vectus having tripple layer of IS No: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes including fittings but excluding the base support for tank complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 246 | Making connection of galvanized mild steel distribution branch with galvanized mild steel main 20mm to 40mm (Twenty milimetres to Forty milimetres) nominal bore by providing and fixing tees including cutting and threading the pipe complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 247 | Providing and laying cement concrete 1:4:8 (One Cement isto four Sand isto eight graded stone aggregate 40mm (Forty millimetre) nominal size ) all round for PVC. pipes of 150mm (One hundered fifty millimetre) internal diameters, for bedding , necessary form work and curing complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 248 | Providing and laying cement concrete 1:3:6 (One Cement isto three Sand isto six graded stone aggregate 40mm (Forty millimetre) nominal size ) all round for PVC. pipes of 150mm (One hundered fifty millimetre) internal diameters, for hauching, necessary form work and curing complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 249 | Constructing brick masonry manhole in cement mortar 1:4 (One cement isto Four coarse sand ) with R.C.C. top slab with 1:2:4 mix (One cement isto two coarse sand (zone- III) isto four graded stone aggregate 20 mm (Twenty millimetre) nominal size), foundation concrete 1:4:8 mix (One cement isto Four coarse sand (zone- III) isto Eight graded stone aggregate 40 mm (Forty millimetre) nominal size), inside plastering 12 mm (Twelve millimetre) thick with cement mortar 1:3 (One cement isto Three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement isto Two coarse sand isto Four graded stone aggregate 20 mm (Twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80cm (Ninety into eighty centimetre) and 45cm (Forty five centimetre) deep including C.I. cover with frame (light duty) 455x610mm (Four hundered fifty five into six hundered ten millimetre) internal dimensions, total weight of cover and frame to be not less than 38 Per Kilogram (Thirty eight kilograms) (weight of cover 23 Per Kilogram (Twenty three kilograms) and weight of frame 15 Per Kilogram (Fifteen kilograms) With Sewer bricks conforming to IS : 4885 complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 250 | Constructing brick masonry manhole in cement mortar 1:4 (One cement isto Four coarse sand ) with R.C.C. top slab with :2:4 mix (One cement isto two coarse sand (zone- III) isto four graded stone aggregate 20 mm (Twenty millimetre) nominal size), foundation concrete 1:4:8 mix (One cement isto Four coarse sand (zone- III) isto Eight graded stone aggregate 40 mm (Forty millimetre) nominal size), inside plastering 12 mm (Twelve millimetre) thick with cement mortar 1:3 (One cement isto Three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement isto Two coarse sand isto four graded stone aggregate 20 mm (Twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 120x90cm (One hundered twenty into ninety centimetre) and 90cm (Ninety centimetre) deep including C.I. cover with frame (light duty) 455x610 mm (Four hundered fifty five into six hundered ten millimetre) internal dimensions, total weight of cover and frame to be not less than 38 Per Kilogram (Thirty eight kilograms) (weight of cover 23 Per Kilogram (Twenty three kilograms) and weight of frame 15 Per Kilogram Fifteen kilograms) With Sewer bricks conforming to IS : 4885 complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 251 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:4 (One cement isto Four coarse sand) C.I. cover with frame (light duty) 455x610mm (Four hundered fifty five into six hundered ten millimetre) internal dimensions, total weight of cover with frame to be not less than 38 Per Kilogram (Thirty eight kilograms) (weight of cover 23 Per Kilogram (Twenty three kilograms) and weight of frame 15 Per Kilogram (Fifteen kilograms) ), R.C.C. top slab with 1:1.5:3 mix (One cement isto One and Half Fine sand isto Three graded stone aggregate 20 mm (Twenty millimetre) nominal size), foundation concrete 1:5:10 (One cement isto Five fine sand isto ten graded stone aggregate 40 mm (Forty millimetre) nominal size), inside plastering 12 mm (Twelev millemetre) thick with cement mortar 1:3 (One cement isto Three coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etcetera complete as per standard design Inside dimensions 455x610 mm (Four hundered fifty five into six hundered ten millmetre) and 45 cm (Forty five centimetre) deep for single pipe line complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 252 | Providing and fixing 455x610mm (Four hundered fifty five into six hundered ten millimetre) light duty rectangular cast iron manhole cover with frame cover weight 23Per Kilogram (Twenty three kilograms) single seal pattern complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 253 | Supplying and fixing C.I. cover 300x300 mm (three hundered into thhree hundered millimetre) without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 Per Kilogram (four point five kilogram) complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 254 | Providing and fixing S.F.R.C heavy duty manhole cover Circular shape 560mm (five hundered sixty millimetre) diametre precast R.C.C. manhole cover with frame-H.D.-20 (twenty) within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 255 | Provision for water lifting pump 1.00 HP (One point zero zero horse power) of Crompton/Kirloskar including all necessary fittings complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 256 | Providing and fixing 25 mm (twenty five millimetre) diametre fire hydrent inculuding all necessary fiting complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
| 6 | Click here to download tender document | Tender Documents |
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail