Tender For Repair/ Maintenance Of External Water Supply, Distribution Lines And Certain Connected Works At Hww At Dalhousie Cantt Under Age(I) Dalhousie
Tender Value
9 Lakhs
Estimated cost
Bid Submission
06 Jul 2026
0 days left
EMD
18000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dalhousie → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of External Water Supply, Distribution Lines And Certain Connected Works At Hww At Dalhousie Cantt Under Age(I) Dalhousie
BOQ
| Sl. No. | Item Description |
| 1 | M&L for draining out water from semi undergroung water storage tank of capacity 75000 Gallon scraping out bleachin residual, sediments, sand, fungues scaling etc from inside, bottom and wall of water storage tank with the help of wire brush, steel Patti broom and jute bags and taking out same from the water storage tank and throwing at a distance not less than 25 mtr away from the water storage tank, cleaning inside the water storage tank and then washing and flushing out with fresh water till the entire satisfaction of Engr-in-Charge and writing the date of cleaning on water tank wall with black/white enameld paint after cleaning of external wall surface of the tank with wire brush and remove all busses and algae neatly and painting of GI sheet of the top of the tank with green colour 2 coat of enameled paint all as specified and directed by Engineer-in-Charge (At HWW Panchpulla - 02 Nos) |
| 2 | All as per above srl Item No. 1 here in before but 20000 Galon Capacity complete all as directed by Engineer-in-Charge. ( Gemini area -01 No) |
| 3 | All as per above srl Item No. 1 here in before but 10000 Galon Capacity complete all as directed by Engineer-in-Charge. (At Ticca Area - 01 Nos) |
| 4 | Excavation in trenches for not exc 1.5 mtr wide and not exc 1.5 mtr depth and getting out in Hard/dense soil for laying of GI pipe complete all as specified and directed. |
| 5 | Returning filling in including spreading levelling watering and well ramming in layers n.exc 25cm complete all as specified & directed. |
| 6 | Removing excavated materials n.exc 50m and depositing where directed at a level n.exc 1.5m above the Starting point. |
| 7 | M&L for Taking up or down galvanized steel tubing with complete fitting for refixing or removal of worksite complete all as specified and directed by Engineer-in-charge. |
| 8 | (a) 20mm bore |
| 9 | (b) 25mm bore |
| 10 | (c) 40mm bore |
| 11 | (d) 50mm bore |
| 12 | (e) 80mm bore |
| 13 | (f) 100mm bore |
| 14 | Supply and laying in trench/fixed on wall/floors galvanized steel water tubing medium grade ISI marked of the following sizes incl all fittings such as bends elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and pigs, unions etc. complete all as directed.Note :- Necessary excavation and earth work shall be measured and paid separately |
| 15 | (a) 20mm bore |
| 16 | (b) 25mm bore |
| 17 | (c) 40mm bore |
| 18 | (d) 50mm bore |
| 19 | (e) 80mm bore |
| 20 | (f) 100mm bore |
| 21 | S&F gunmetal globe or gate valve with iron wheel head screwed bolt ends for iron pipe of the following sizes complete incl taking down old gate valves all as specified and directed by Engineer-in-charge. |
| 22 | (a) 20mm bore |
| 23 | (b) 25mm bore |
| 24 | (c) 40mm bore |
| 25 | (d) 50mm bore |
| 26 | Taking out U/S CI sluice valve for the following sizes, supply and fixing new CI sluice valves Class PN1.6 confirming to ISI with flaged ends both ends with gun metal/steel spindle, round wheel incl jointing materials complete all as directed. |
| 27 | (a) 80mm bore |
| 28 | (b) 100mm bore |
| 29 | Removing the existing sluice valve of the following sizes and taking out the worn out gate and spindle refixing back the gate supply and fixing the new spindle made out of stainless steel rod of suitable size to fix the existing gate inc check nut regrinding of the gate fixing of nuts bolts gaskets etc complete all as specified: |
| 30 | (a) 80mm bore |
| 31 | (a) 100mm bore |
| 32 | Supply and fixing Ball brass valves high pressure with polythene float valve and flynut complete secewed for iron pipe or brass feerrule 20mm dia including taking down u/S valve complete all as specified and directed by Engineer-in-Charge. |
| 33 | M&L for Cutting the existing CI/GI pipe 80/100 mm bore or screwing existing CI/GI pipe for addn or altn as required on site including GI fiitings complete all as directed. Note: Necessary earth work shall be measured and paid separately. |
| 34 | M&L construction of brick masonary valve pit built in cement mortar 1:6 including all excavation and earth work in any type of soil and disposal of surpluse soil to a distance not exc. 50 mtr all as directed by Engineer-in-charge including 10mm thick plastering internally in CM 1:4 and flush pointing in same mortar to brick work externally as work proceeds and cement concrete in foundation PCC (1:4:8) type D-2 15 cm thick & PCC 1:3:6 type C-1 coping, including 75 mm thick & hard core of gauge and exc. 63mm using broken stone /bolder, MS sheet cover 3.15 mm thick MS angle iron frame, handle locking arrangement and painting to steel surfaces including dismantling of old valve pit complete all as specified and directed by Engineer-in-Charge. incl necessary excavation earth work of the following sizes :- |
| 35 | (a) 900 mm x 900mm x 900mm |
| 36 | (b) 1200mmx1200mmx1200mm |
| 37 | Supply only chlorine chemical test kit in replacement of old u/s kit for testing of water complete all as specified and directed by Engineer-in-Charge. |
| 38 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 39 | M&L 15mm thick cement plaster (1:6) on fair faces of brick work or concrete surfaces complete all as specified and directed. |
| 40 | M&L for Applying two coats of white wash on new wall surface including preparation of surface complete all as specified and directed |
| 41 | M&L 75mm thick PCC type B-2 (1:2:4) using 40mm graded stone aggregate as in sub floor, sub, floors and pavings etc complete all as sprecified and directed |
| 42 | M&L for chequred cement concrete tiles 20cm x20cmx25mm thick set, joined and pointed in neat cement slurry in floors with grey cement and pigment including 15 mm thick screed bed in CM 1:6 including dismantling old surface complete all as specified and directed. |
| 43 | Testing of water sample for head water works Punchpulla and Gemini Area, considering all parameter of drinking water as per IS Specification through authorised Govt laboratory and produced to the Engr-in-charge for records. |
| 44 | M&L for construction of Thrust block of size shuld be required as per site made out of PCC 1:2 :4 using 20mm graded stone aggregate grade B-2 for holding of raising mains of CI/GI pipe line complete all as specified and directed. |
| 45 | M&L for LED display glow sign PVC board for HEAD Water Works supply installtion and inside the borad moulded letter for writing 250/400mm hight illuminated after provide to power supply for the board and letters are display on the board for \\" WATER SUPPLY INSTALLATIONS AT HEAD WATER WORKS \\" on top of the board and ''AGE(I) DALHOUSIE'' at the bottom of the board with both side MES Logo on the board complete with fixing arrangement of the board in the gate coloums with suitable size Angle iron frame and should be fixed to the main gate of Electric sub staion yard on the top of two vertical coloums with complete grouting and fixing arrangement by using of anchor fastner including testing after fixing of glow sign board complete with PCC work complete all as specified and directed . |
| 46 | S&F for Rotational moulded polyethylene water storage tank 500 Ltrs capacity four layered (ISI Marked) cylinderical vertical with closed top, hoisted and fixed in position all as specified in SSR Part-I with ball brass valve, high pressure with PVC float valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line .including all accessories, and dismantling water tank of capacity exceeding 250 litres but not exceeding 500 litres and removing to stores, all as specified . |
| 47 | S&F for Rotational moulded polyethylene water storage tank 1000 Ltrs capacity four layered (ISI Marked) cylinderical vertical with closed top, hoisted and fixed in position all as specified in SSR Part-I with ball brass valve, high pressure with PVC float valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line .including all accessories, and dismantling water tank of capacity exceeding 500 litres but not exceeding 1000 litres and removing to stores, all as specified .all as specified . |
| 48 | Supply and fixing LED Street light fitting 35/45watt 230 V, AC, outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant includng thermal management in multiple optic complete with IP 65/66 protection complete all as specified and directed by Engineer-in-Charge. |
| 49 | Supply and fixing LED Street light fitting 60 watt 230 V, AC, outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant includng thermal management in multiple optic complete with IP 65/66 protection complete all as specified and directed by Engineer-in-Charge. |
| 50 | Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor,served with inner sheathing of PVC tape and overall PVC Sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4 mm suspension wire,one twin core 4 sqmm cable complete and all as specified and directed by Engineer-in-charge. |
| 51 | Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor,served with inner sheathing of PVC tape and overall PVC Sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4 mm suspension wire,one twin core 6 sqmm cable complete and all as specified and directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender