|
| 1 | M & L Preparing the old plastered or unplastered decorated surfaces of walls and applying one coat of white wash complete all as specified and as directed. |
| 2 | M & L Preparing the old plastered or unplastered decorated surfaces of ceilings and applying one coat of white wash complete all as specified and as directed. |
| 3 | M & L Preparing the old plastered or unplastered decorated surfaces of walls and applying two coats of white wash complete all as specified and as directed. |
| 4 | M & L Preparing the plastered or un plastered old decorated surfaces of walls and applying two coats of colour wash complete all as specified and as directed. |
| 5 | M & L Preparing the plastered or un plastered old decorated surfaces of walls and applying one coat of colour wash complete all as specified and as directed. |
| 6 | M&L Preparation of old painted surfaces of walls including brooming down or steel wire brushing scraping down smoke soot, moulds, moss: efflorescent salts and trading oil, greasy spots and applying one coat of Acrylic distemper and including wherever necessary filling of nail holes/ inequalities with Putty for smooth finish of any height .etc complete all as specified and as directed. |
| 7 | All as per Item No.6 above but on ceilings complete all as specified and as directed. |
| 8 | M&L Preparation of old painted surfaces of walls including brooming down or steel wire brushing scraping down smoke soot, moulds, moss: efflorescent salts and trading oil, greasy spots and applying two coats of Acrylic distemper and including wherever necessary filling of nail holes/ inequalities with Putty for smooth finish of any height .etc complete all as specified and as directed. |
| 9 | M&L Complete removal of existing treatment of old painted wall for internal surfaces and applying two coats of Acrylic distemper over and including a coat of primer over and including 3 mm thick wall care putty in two layers of approved make & shade on walls of up to any height etc, complete all as specified and as directed. |
| 10 | M & L Preparation of old painted wooden surfaces of any description over 10 centimetre width or girth and applying one coat of synthetic enamel paint all as specified and as directed. |
| 11 | M & L Preparation of old painted steel and iron surfaces of any description over 10 centimetre width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 12 | M&L Preparation and cleaning of the old surfaces and applying one or more coats of French polishing on old wooden surfaces of any description, width or girth duly complete all as specified and as directed |
| 13 | M & L Preparing old surfaces of wood and wood based material of any description and girth not otherwise described and treated with one coat of creosote oil all as specified and as directed. |
| 14 | S&F in repairs 25 mm dia, 3 mm thick stainless steel curtain rod confirming to SS 304 grade and weight not less than 2.40 Kg per metre complete all as specified and as directed. |
| 15 | S&F in repairs stainless steel brackets (decorative type) suitable to 25 mm dia SS curtain rod complete all as specified and as directed. |
| 16 | S&F in repairs stainless steel finals (decorative type) suitable to 25 mm dia SS curtain rod complete all as specified and as directed. |
| 17 | S & F Sheet glass 3mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane including hacking out broken glass and all as specified. |
| 18 | S & F Sheet glass 3mm thick ordinary quality and glazing with oil putty in square but exceeding 0.5 Sqm in each pane including hacking out broken glass and all as specified. |
| 19 | S & F Figured glass pin head type 3mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane including hacking out broken glass and all as specified. |
| 20 | S&F in repairs Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples, screws, nuts & bolts etc to wooden/steel frames of any description complete all as specified and as directed |
| 21 | Demolition of concrete in ground floors (un re-inforced) and paving n.exc. 15 cm thickness (below or above ground level) and including removal of rubbish/ demolished materials out of MD land complete all as specified and directed. |
| 22 | M&L 75 mm thick PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in plinth protection / paths laid in alternative bays finished even and smooth without using extra cement including making 10 mm wide grooves to full depth at the junction of wall and plinth protection, at 3 metre interval and every change of direction duly filling the grooves with mixture of bitumen and sand mixed in the ratio of 1:3 by weight and top 10 mm depth to be sealed with ceiling compound grade ‘A’ complete all as specified and as directed |
| 23 | M&L Designer rubber moulded chequerred cement concrete tiles of size 300 x 300 x 22mm or 250 x 250 x 22mm thick with using mixture of grey and white cement in equal porportions with pigments as in floors and set and pointed in neat cement slurry over and including screed bed or bedding layer of 15 mm thick CM (1:6) for laying floor finishes etc including dismantling old tiling of any description and complete all as specified and as directed. |
| 24 | M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; etc including dismantling old tiling of any description and complete all as specified and as directed. |
| 25 | Demolition of brickwork or stone/boulder masonry, built in cement mortar with all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles and including removal of rubbish/ demolished materials out of MD land complete all as specified and directed. |
| 26 | M&L Brick work with fly ash bricks old size, straight or curved on plan exceeding 6.0 metre mean radius built in CM (1:6) complete all as specified and as directed. |
| 27 | M&L Half brick thick walls with sub-class ‘B’ old size bricks, straight or curved on plan to any radius built in CM (1:4) complete all as specified and as directed |
| 28 | Taking down cement plaster on brick or stone walls/ceilings, etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 29 | M&L Rendering 12 mm thick CM (1:4) on fair faces of brick work or concrete surfaces without using extra cement complete all as specified and as directed. |
| 30 | M & L Rendering 5 mm thick in CM (1:3) on concrete surfaces of ceiling finished even and smooth without using extra cement in patches n exc 3 sqm each patch including removing old plastering complete all as specified and directed. |
| 31 | M & L Preparing newly plastered wall surfaces and applying three coats of white wash complete all as specified and as directed. |
| 32 | M & L Preparing newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed. |
| 33 | M & L Preparing newly plasterd wall surfaces of walls and applying two coats of Acrylic distemper over and including a coat of primer using chalk whiting over and including 3 mm thick wall care putty in two layers complete all as specified and as directed. Please Enable Macros to View BoQ information |
