|
| 1 | SITC of |
| 2 | Labour Charges for Shifting of 63 KVA DTR inculding all LV/HV Connection and Channels complete Job |
| 3 | Gapless Surge Arrestor,9 kV ,10 kA ,LA with polymer housing, Stn. Type |
| 4 | 11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp,Vertical Type |
| 5 | 11 kV Horn Gap Fuse Set 3 Phase 200A |
| 6 | 150 mm² Single Core ,1.1kV Grade, PVC Insulated Stranded ConductorFRLS type |
| 7 | 9 Mtr. Long Pole,ST-410 SP33) |
| 8 | 33kV Polymeric composite Disc Insulator 36kV,min failing load 70kN, Lighting Impulse 170kV Positive and 180kV Negative,creepage distance 900mm |
| 9 | GI Channel/Angle/Flat of sizes including clamps |
| 10 | Galvinized Nuts and Bolts. |
| 11 | Chemical Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for |
| 12 | 8Mtr. Long Pole |
| 13 | 50 mm sq AB LT Cable |
| 14 | GI Channel/Angel/Flat of Sizes inculding clamps |
| 15 | Suspension/Tension clamp, Double D-Clamps, with eye hook and Dead End Complete Set |
| 16 | Insulating Piercing connector |
| 17 | SMDB bos for consumer service line |
| 18 | Galvanized Nuts and Bolts |
| 19 | Earthing Complete by GI Pipe 40 mm 3mtr long through GI Strip 25x3mm. |
| 20 | Red Oxide |
| 21 | Aluminium Paint |
| 22 | Danger plates |
| 23 | Cement bottoming 1:2:4 mix as per REC standards .45cum /pole |
| 24 | 33kV Polymeric composite Pin Insulator 36kV, 10kN, Lighting Impulse 170kV Positive and 180kV Negative, creepage distance 900mm |
| 25 | Labour Charges for dismentaling and re-errection of ST Poles |
| 26 | Wedge connectors/PG Clamps |
| 27 | Danger Plates with Clamps |
| 28 | GI Barbed Wire for Anti Climbing |
| 29 | Cement bottoming 1:2:4 mix as per REC standards .5cum/pole |
| 30 | Painting of Poles Red Oxide |
| 31 | Painting of Poles Aluminium Paint |
| 32 | Sundry items like almunium lugs,jumpers,binding tape etc |
| 33 | 30 mm² ACSR Conductor |
| 34 | PG Clamps for 30Sqmm ACSR Conductor |
| 35 | 11 KV Tri- Vector meter with suitable CT/PT Units Please Enable Macros to View BoQ information |
