|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. |
| 2 | a) All Kinds of Soil |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 4 | a) All Kinds of Soil |
| 5 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 6 | a)All kinds of soil |
| 7 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. a) All work upto plinth livel |
| 9 | i) 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brick aggregate 40 mm nominal size) cum well burnt |
| 10 | ii) 1 : 3 : 6 ( 1 cement : 3 fine sand : 6 graded well burnt brick aggregate of 40 mm nominal size) |
| 11 | iii) 1 : 4 : 8 ( 1 cement : 4 fine sand : 8 graded well burnt brick aggregate of 40 mm nominal size) |
| 12 | Centering shuttering including struttings, proppingetc. and removal of form work for: |
| 13 | i) Foundations, footings, bases for columns |
| 14 | ii) Columns, piers, abutments, pillaras, posts and struts |
| 15 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-All work upto plinth level: |
| 16 | 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 17 | 1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size) |
| 18 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement- |
| 19 | 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 20 | 1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size) |
| 21 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement |
| 22 | 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 23 | Centering shuttering including struttings, propping etc. and removal of form work for: |
| 24 | i) Foundations, footings, bases for columns etc. for mass concrete with timber plank |
| 25 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. using shuttering ply |
| 26 | Suspended floors, roofs, landings, balconies and access platform with timber planks |
| 27 | ii) Lintels, beams, plinth beams, girders, bressumers and cantilevers with wooden plank |
| 28 | iii) Columns, Pillars, Piers, Abutments, Posts and Struts with wooden plank |
| 29 | iv) Weather shade, Chajjas, corbels etc., including edges. |
| 30 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 31 | Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 32 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 33 | Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 34 | First class brick work in foundation and plinth including cost of all materials as required complete: |
| 35 | i) In cement mortar 1:4 ( 1 cement : 4 fine sand ) |
| 36 | First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete:- |
| 37 | i) In Cement mortar 1:4 ( 1 cement : 4 fine sand ) |
| 38 | Extra for brick work in triangular, square and rectangular pillars including cost of all materials as required complete. |
| 39 | Half brick masonry work with first class bricks in foundation and plinth including cost of all materials as required complete:- |
| 40 | i) In Cement mortar 1:4 ( 1 cement : 4 fine sand ) |
| 41 | Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:- |
| 42 | i) In Cement mortar 1:4 ( 1 cement : 4 fine sand ) |
| 43 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. |
| 44 | I ) Fixed to steel windows by welding. |
| 45 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, & with cleats with bolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required |
| 46 | i) Using flats 30x6mm for diagonal braces and central cross piece. |
| 47 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 48 | i) Hot finished welded type tubes |
| 49 | Providing and fixing M.S. round holding down bolts withnuts and wahser plates complete as per standard design. |
| 50 | Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. all complete as per direction of the Engg-in-charge. |
| 51 | i) 40 mm thick |
| 52 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including =cutting to size and shape wherever required. |
| 53 | i) 0.63 mm thick Zinc Coating not less 275 Gm/m2 |
| 54 | 12 mm cement plaster of mix. |
| 55 | i) Cement mortar 1:3 (1 cement : 3 fine sand |
| 56 | ii) In cement mortar 1:4 (1 cement : 4 fine sand) |
| 57 | 15 mm cement plaster on the rough side of single or half brick wall of mix |
| 58 | In Cement mortar 1:4 ( 1 cement : 4 fine sand ) |
| 59 | Neat cement punning. |
| 60 | Distempering with dry distemper of approved brand and manufacture (Two or more coat) of required shade on new work, over and including water thinnavle primining coat to give an even shade complete. ( Payment shall be made after submission of Test certificate issued by the manufacturer) |
| 61 | Finishing walls with water proofing cement paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : |
| 62 | New work ( two or more coats applied @ 3.84 kg/10 sqm) |
| 63 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: |
| 64 | Two or more coats on new work |
| 65 | Providing and fitting fixing Steel Sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), 415/500 Volt, L & T / Havells / BCH make etc. complete as per specification and direction of the Engineer-in-charge. |
| 66 | i) 100 amps |
| 67 | Providing and fitting fixing of Fully Automatic Star Delta type Motor starter ( 3 ph. 50 Hz, 415V, in Steel Sheet Enclosures with Contractors and Timer etc. complete suitable for submersible Pump L & T, BCH, ABB make as per specification and direction of the Engineer-in-charge. |
| 68 | i) 35 HP/26 kw Relay range within 20-32 + 10% |
| 69 | Providing and fitting fixing of 6 feet x 4 feet x 1 inch (thickness) Gamair wood / plywood Pannel Board for fitting fixing of electrical items, in/c 2 nos MS angle post ( size 2 inch x 2 inch x 9 feet ), nuts & bolts etc. for irrection of the same by 1:1.5:3 cement concrete casting (1 feet x 1 feet x 2 feet) below the ground level and painting two or more coats & plastic paint as per specification and direction of the Engineer-in-charge. |
| 70 | Providing and fitting fixing with PVC insulated single core multistrand Copper cable conforming to IS : 694 for inter connection with all electrical equipments of the pannel board as per specification and direction of the Engineer-in-charge. |
| 71 | i) 10 sqmm |
| 72 | Providing and fitting fixing of moving iron type, Range 0-500 V, 96 mm x 96 mm size AC Volt meter ( L & T / AE make) with selector switch as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge. |
| 73 | Providing and fitting fixing of moving iron type, Range 0-100/0-200 amps, 96 mm x 96 mm size AC Amps meter direct reading type (L & T/ AE make) with selector switch and CT coil as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge. |
| 74 | Providing and fitting fixing of Moulded Case Circuit Breaker (MCCB) of different Thermal release range , 415 + V, 50Hz (L & T, BCH, ABB make) as per specification and direction of the Engineer-in-charge. |
| 75 | i) 32-40 Amps |
| 76 | Providing earthing with perforated 40 mm dia G.I. pipe (Medium class) (12 mm dia perforation),laying of 4 mm dia GI wire from earth electrode to panel, including excavating hole of 600 mm dia and refilling with Salt and Charcoal / coke in alternate layers of 300 mm , as per standard specification and direction of the Engineer-in-charge. |
| 77 | i) For 3-phase connection with 4.00 mtr. Long G.I. pipe |
| 78 | Providing and fitting fixing 3 phase indicating lamp fiited with panel board with three different colour lamps with batten holder complete as per specification and direction of the Engineer-in-charge. |
| 79 | Providing and fitting fixing heavy duty box type (Resin filled) power factor correction capacitor L & T make etc. complete as per specification and direction of the Engineer-in-charge. |
| 80 | i) 5-15 kVAr 440 V |
| 81 | Providing and fitting fixing Single Phasing Preventor + Selectable under voltage + Selectable over voltage on delay 5 sec. and off delay 15 sec. phase asymmetry 10% L&T/BCH/Havels/Siemens etc. make complete as per specification and direction of the Engineer-in-charge. |
| 82 | Providing & fabrication of column pipe including fitting fixing of G.I. flange by cutting the GI pipe ( conforming to IS : 1239 medium class ) into 3.05 mtr. long and welding the same with GI flange as per specification and direction of the Engineer-in-charge ( G.I. pipe will be provided by the agency at his own cost & risk). |
| 83 | i) For 80 mm dia G.I. pipe with 10 mm thick GI flange |
| 84 | Providing and fitting fixing of Pressure meter ( 0.0 - 14.0 Kg/ sqcm.) as per specification and as per specification and the direction of the Engineer - in-charge. |
| 85 | Providing & fitting, fixing &Installation of 5000 GPH x 76 mtrs. Head water lubricated Submersible pump of maximum 150 mm outer dia. With maximun 10(ten) stages coupled with required wet and non-cover loading submersible motor suitable for 340-440 volts, 3 phase 50Hz, A.C Supply and star delta method of starting along with 35 mtrs. x 2 x 3 x 4 sq.mm joint less PVC 3 (Three) core double length flat cable (continuous length) of suitable size fitted with submersible motor, suction case, strainer, coupling key, vertical non- return valve cum discharge case including supplying of 10 Nos. suitable cable guard with clips & nuts & bolts, 2 (two) pair M.S. column clamps as per direction of Engineer-in-charge conforming to terms & conditions of the contract. (Each pump with motor shall consists of stainless stell closed type impeller , C.I. bowl, C.I discharge case, pump shaft (styainless steel), bush (bronze), shaft sleeve (bronze/chromium), sand guard, winding rotor, stator, counter thrust plate, thrust bearing segment etc. conforming to relevant BIS codes of made DUKE/KSB/WPIL/LUBI. |
| 86 | Providing, fixing and laying rigid UPVC pipes conforming to IS : 4985 jointing with couplers, of same class conforming to IS : 10124 ( Pt-II ) with solvent cement conforming to IS : 14182 including testing of joints complete ( but excluding the cost of specials like bend, tees etc. which will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge. A. Class - 3 ( working pressure 6.0 kg / cm2) |
| 87 | i) 40 mm OD |
| 88 | ii) 50 mm OD |
| 89 | iii) 90 mm OD |
| 90 | iv) 110 mm OD |
| 91 | Providing, fixing and laying fabricated UPVC bend of required degree conforming to IS : 10124 ( part 8 / 9 / 10 / 11 / 12 / 13 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. |
| 92 | i) 40 mm dia. |
| 93 | ii) 50 mm dia. |
| 94 | iii) 90 mm dia |
| 95 | iv) 110 mm dia |
| 96 | Providing, fixing and laying fabricated UPVC end cap conforming to IS : 10124 ( Part 4 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. |
| 97 | i) 40 mm dia. |
| 98 | ii) 50 mm dia. |
| 99 | iii) 90 mm dia |
| 100 | Providing, fixing and laying fabricated UPVC equal tee conforming to IS : 10124 ( Part 5 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. |
| 101 | i) 40 x 40 mm dia. |
| 102 | ii) 50 x 50 mm dia. |
| 103 | i) 90 x 90 mm dia |
| 104 | ii) 110 x 110 mm dia |
| 105 | Providing, fixing and laying fabricated UPVC straight reducer conforming to IS : 10124 ( Part 3 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. |
| 106 | i) 50 x 40 mm dia. |
| 107 | i) 110 x 90 mm dia |
| 108 | Providing and fixing G.I. pipes medim class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in - charge.A. External work. |
| 109 | i) 15 mm dia. nominal bore |
| 110 | ii) 40 mm dia nominal bore. |
| 111 | iii) 50 mm dia nominal bore. |
| 112 | Providing and fixing C.I. non-return valve of approved quality as per of CPWD specification and direction of the Engineer - in - charge. |
| 113 | i) 50 mm dia nominal bore. |
| 114 | i) 100 mm nominal bore |
| 115 | Providing and fixing brass ferrule with C.I. cover conforming to IS : 2692 including boring and tapping the main as per CPWD specification and direction of the Engineer - in - charge. |
| 116 | i) 10 mm nominal bore |
| 117 | Providing and fixing C.I. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge. |
| 118 | i) 80 mm dia./ PN - 1.0 |
| 119 | ii) 100 mm dia / PN - 1.0 |
| 120 | Providing, fixing and laying flanged fabricated UPVC Tailpiece with MS flange (8 mm thick) conforming to IS : 10124 ( Part 6 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. |
| 121 | i) 90 mm dia. |
| 122 | ii) 110 mm dia |
| 123 | Charges for push-on ( Tyton ) joints to centrifugually (Spun ) cast iron pipes or ductile iron pipes including testing of joints and including the cost of rubber gasket as per CPWD specification and direction of the Engineer - in - charge. |
| 124 | ii) 100 mm dia |
| 125 | Charges for cutting D.I. pipe with steel saw by manual means as per CPWD specification and direction of the Engineer - in - charge. |
| 126 | i) 100 mm dia |
| 127 | Providing and fixing G.I. Nipple of medium class as per CPWD specification and direction of the Engineer - in - charge. |
| 128 | i) 15 mm dia 150 mm long |
| 129 | ii) 15 mm dia 225 mm long |
| 130 | Providing and fixing GI Full way valveas per CPWD specification and direction of the Engineer - in - charge. |
| 131 | i) 40 mm dia. |
| 132 | ii) 50 mm dia. |
| 133 | Providing and laying of flexible PVC pipe (conforming to IS:7634) complete as per specification and direction of the Engineer - in - charge (cost of earth work and fittings will be paid separately). |
| 134 | i) 15 mm dia |
| 135 | ii) 25 mm dia. |
| 136 | Providing and fixing DI specials as per CPWD specification and direction of the Engg-in-charge. |
| 137 | A. D.I. all socketted Bend 90 degree.i) 80 mm dia./ PN - 1.0 |
| 138 | B. D.I. all socketted teei) 80 x 80 x 80 mm dia. |
| 139 | ii) 100 x 100 x 80 mm dia |
| 140 | iii) 100 x 100 x 100 mm dia |
| 141 | Providing & fitting, fixing GI pipes (Meduim class) conforming to IS:1239 for SBDTW/MK-II/III as per specification and direction of the Engg-in-charge. i)40 mm N.B. |
| 142 | Providing & fitting, fixing of Bottom Cap (UPVC) as per specification and direction of the Engg-in-charge. |
| 143 | i)100 mm dia. |
| 144 | Excavating trenches of required width for pipes, cables etc. including exacavation for sockets, dressing of sides where required, ramming of bottoms, depth upto 1500 mm (slope-1 in 200)including getting out the excavated soil and backfilling of soil as required after laying of pipeline, in layers not exceeding 200 mm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil with all required leads as per Chapter - 2 of CPWD specification and direction of the Engineer - in - charge. |
| 145 | A) For UPVC pipes in new work.a. All kind of Soilsi) For pipes not exceeding 90 mm dia |
| 146 | ii) For pipes exceeding 90mm dia but not exceeding 300mm dia. |
| 147 | B) For GI/CI/DI pipes in new work. a) All kind of Soilsi) For pipes not exceeding 90 mm dia |
| 148 | i) For pipes exceeding 90mm dia but not exceeding 300mm dia. |
| 149 | Providing and fixing G.I. Bend /elbow in the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. |
| 150 | i) 15 mm dia |
| 151 | ii) 25 mm dia. |
| 152 | iii) 40 mm dia. |
| 153 | Providing and fixing G.I. equal Tee with the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. |
| 154 | i) 15 x 15 x 15 mm dia |
| 155 | ii) 25 x 25 x 25 mm dia. |
| 156 | ii) 40 x 40 x 40 mm dia |
| 157 | Providing and fixing G.I. Unequal Tee with the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. |
| 158 | i) 25 x 25 x 15 mm dia |
| 159 | ii) 40 x 40 x 15 mm dia |
| 160 | ii) 50 x 50 x 15 mm dia. |
| 161 | Providing and fixing G.I. Reducer with the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. |
| 162 | i) 25 x 15 mm dia |
| 163 | ii) 40 x 15 mm dia |
| 164 | iii) 50 x 40 mm dia |
| 165 | iv) 80 x 50 mm dia |
| 166 | Providing and fixing G.I. socket as per CPWD specification and direction of the Engineer - in - charge. |
| 167 | i) 15 mm dia |
| 168 | Providing and fixing G.I. union as per CPWD specification and direction of the Engineer - in - charge. |
| 169 | i) 15 mm dia |
| 170 | ii) 25 mm dia. |
| 171 | iii) 40 mm dia. |
| 172 | iv) 50 mm dia. |
| 173 | Providing & fitting, fixing PVC/Plastic Bib Cock conforming to IS:9763 in hydrant point at different location as per specification and direction of the Engg-in-charge. |
| 174 | i) 15 mm dia PVC/Plastic Bib Cock . |
| 175 | Providing & fixing of UPVC End Cap/Well Cap suitable for UPVC 'CM' Casing or 'RS' pipes as per specification and direction of the Engg-in-charge. |
| 176 | i) 100 mm dia. |
| 177 | ii) 125 mm dia. |
| 178 | Driling & boring pilot hole in any soil strata by manual means, collection of soil samples of different strata met with during driling at various suitable levels, preservation of samples in polythene bags/sample boxes and disposals of excess soil of Mud, in/c the cost of water etc. as required to maintain the pilot hole properly as per specification and direction of the Engg-in-charge. |
| 179 | i)100 mm dia. |
| 180 | Reaming of pilot hole to an enlarged bore hole in any soil strata by manual means, disposal of execess soil or mud, in/c the cost of water etc. as required to maintain the bore hole properly as per specification and direction of the Engg-in-charge. |
| 181 | i) from 100 mm dia pilot hole to 250 mm bore hole |
| 182 | Providing and lowering of UPVC pipe as per IS: 12818 after washing of the bore hole by manual means as per specification and direction of the Engg-in-charge. |
| 183 | A. 'CM' casing pipe. i) 125 mm dia. |
| 184 | iii)100 mm dia. |
| 185 | B. 'RS' Pipe. i) 100 mm dia |
| 186 | Washing & Development of tube well by using Hand Pump or by any suitable method and testing of the well as per specification & direction of the Engineer-In-Charge. |
| 187 | Providing & shrouding of the Deep Tube Well assembly with washed pea-gravels (2.0-4.75 mm effective size) as per specification (IS:4097) and direction of the Engg-in-charge. A)With Contractors Rig |
| 188 | i) With pea-gravels obtained from Durgapur, West Bengal. |
| 189 | Providing & fixing of Housing Clamp (Made with 12mm thick MS Sheet) along with Well Cap (Made with 10mm thick MS Sheet) with necessary arrangments for SBDTW as per specification & direction. of the Engg-in-charge. |
| 190 | i)125 mm dia. |
| 191 | Providing and fixing of UPVC reducer suitable for UPVC 'CM' cassing or 'CS' cassing or 'RS' pipes as per specification and direction of the Engg-in-charge. |
| 192 | i)125 x 100 mm dia. |
| 193 | Providing & laying S & S Centrifugally Cast ( Spun ) Ductile Iron Class K-7 Pipes conforming to IS : 8329 as per CPWD specification and direction of the Engineer - in - charge. |
| 194 | i) 100 mm dia ductile Iron Class K-7 Pipes. |
| 195 | i) 80 mm dia ductile Iron Class K-7 Pipes. |
| 196 | Providing & fitting fixing of G.I. flange ( 10 mm wall thickness ) by welding with G.I. / MS pipe and placing position as per specification and the direction of the Engineer-in-charge. |
| 197 | i) 80 mm dia |
| 198 | ii) 100 mm dia |
| 199 | Making road crossing by horizontal boaring for smooth laying of UPVC/CI/DI/GI pipes etc. of required dia complete as per specification and the direction of the Engineer-in-charge. A. By manual means |
| 200 | Providing and placing of G.I. pipe over the pump house on top portion of the R.C.C. column as per specification and the direction of the Engineer-in-charge. |
| 201 | i) 125 mm dia |
| 202 | Supplying and fitting, fixing of MS Box having size 60 cm x 60 cm x 45 cm slope roof and front shutter with locking arrangement fitted with 4 (four) Nos. 40mm x 40mm x 6mm MS Angle of 1.60 Mtr. long in/c providing & fitting, fixing wooded Board inside the box having size 55cm x 55cm x 1cm thick starter, main switch and in/c cost of necessary 15 cm x 15 cm x 30 cm with 1:2:4 (1 cement : 2 fine sand : 4 Jhama bricks agg. 12.50 mm nominal gauge) as per direction of the Engg-in-charge. |
| 203 | Supplying and fitting, fixing of single phase motor starter panel unit 3.0 HP capacity comprising with 2 pole conductor, over load realy, capacitor, volts meter of BCH/L&T make with necessary copper wire etc. complete as per direction of the Engg-in-charge. |
| 204 | Supplying and installation of water lubricated submersible pump of Duke make (Model No.DSP4RFH05) having capacitiy 2000 GPH at total head of 45 mtr. Coupled with sumersible meter 3 HP suitable for 240 Volt (+10% verification) single phase 50HP.AC supply DOL starting method to run at 2880 ROM along with 35 mtr 2.50 Sqm PVC insulated 3 (three) core flat copper cable in/c fitting fixing & lowering and 40 mm dia GI pipe upto reqd depth. etc. complete as per direction of the Engineer-In-Ch. (required 40/32 mm dia GI pipe will be supplied by the Deptt. at free of cost or paid separately) |
| 205 | Providing and fitting, fixing of hoarding cum display board of JJM of size 8 ft. x 6 ft. (2.40 m x 1.80 m) with frame comprising of 40 mm dia GI pipe (medium class) around the board 2 nos. 25 x 25 x 4 mm size MS vertical stiffners with equally placed and 1 no. 25 x 25 x 4 mm size horizontal stiffners centrally placed and 2 mm thick MS sheet (2.40 m x 1.80 m) with necessary welding, painting, lettering and crected vertically in such way bottom of the board shall be placed 900 mm above the Ground Level with 2 nos. 40 mm dia GI pipe embedded in cement concrete block of 1:2:4 (1 cement : 2 fined sand : 4 graded well burnt brick aggregate 20 mm nominal size) of 300 mm x 300 mm & 900 mm total depth out of which 150 mm shall be projected over GI etc. complete as per specification and direction of the Engg-in-Charge. |
| 206 | Supplying ISI marked/ Taparia make tools for water scheme. |
| 207 | i) Sly wrenches (12”) |
| 208 | ii) Pipe wrench (14”) |
| 209 | iii) Pliers (8”) |
| 210 | iv) Screw Driver (8”) |
| 211 | v) Hacksaw frame with blade 2 Set |
| 212 | Supplying of armed plastic chair (Supreme make). |
| 213 | Supplying of wooden table with a drawer to the right side of size 48” X 30” X 30”. Please Enable Macros to View BoQ information |
