|
| 1 | Excavation in all types of strata including boulders up to 0.60 m.dia.(0.113cum) for seating of embankment etc.and placing the excavated stuff neatly in dump area or for formation of embankment as directed including cost of all materials,machionery,labour,dressing bed and sides to required level and profile etc.complete with lead 16 m to 250 and 6.0 m lift i) Soil & Soft Murum |
| 2 | Excavation for foundation in Hard murum/hard man/kankhar incl. dressing the side depositing the material as directed with all leads and lifts -----etc compld. |
| 3 | Excavation in soft rock without blasting including boulders up to 0.60 m diameter(0.113cum) for canal, seating of embankment, filtre drains/ catch water drains etc. andplacing the excavated soft rock neatly in dump area or for formation of service road / embankment as directed including cost of all materials, machinary, labour, dressing bed and slides to required level and profile etc complete with lead 16 m to 250m and 6 m lift. . |
| 4 | Providing 25mm dia hole in hard rock 0.75m depth including drilling and blasting |
| 5 | Providing reinforcement for R C C work including cutting ,bending hooking ,laying in position and tying M,s /HYSD /TMT bars for reinforcement of RCC work as per detailed drawing etc.complt with intial lead 50 m and 1.5 m lift 8MM Dai |
| 6 | 10mm Dia. |
| 7 | 25MM Dia. |
| 8 | Providing and laying in situ cement concrete of grade M15 of trap /granite/ gneiss/quartzite/ graded metal for PCC with or without surface reinforcement / RCC concreting requiring heavy or special type of shuttering for works of gallery,sluice,spillway crest, spillway down stream face,energy dissipating structures, intake structures,training walls,piers, abutments etc.with concrete mixer considering lead of 50 m with shuttering and scaffolding placing,compacting, curring etc.complete with an initial lead of 50 m.and lift of 1.5 m. (B) M-15 (Borrow 40 M.S.A.) |
| 9 | Pro. and laying in position M.S. Channle of size 100x80x6mm. including keeping in position with help of M.S. bars welded to the channle 30cm. c/c. staggered including welding, transeporting the material with all leads and lift. |
| 10 | Providing and fixing in position 5mm. M.S. needle Manufacturing With QAP & fabrication 0f Kt weir needle gate straight type size 2.15 x 0.50 m -94 kg weight as per relavant Indian standard with all material, including oil painting with all lead and lift. |
| 11 | Providing treatment for submerge area including cleanning the site and removing excavated stuff and deposited alluvial from submrrgence with shaping the banks of waterbodies to improve and strengthen submerge area etc complete ( Nalla Deepenning) soil |
| 12 | Providing and fixing canal information board of 1.2 x 0.75 m prepared on 16 gauge M.S. sheet with angle iron frame of size 35 X 35 X 3 mm with cross bracing of size 25 X 25 X 3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white back ground and back side grey store enamelled bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows coated with non pealable crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50X50X5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60 X 60 X 75 cm as directed by engineer-in-charge. |
| 13 | Add for Royalty charges |
| 14 | Add DMF Fund (10 % ) of Royalty charges |
| 15 | Add 1 % for Work Insuarance |
| 16 | Add 18 % for G.S.T.Charges Contractor should quote rate on Civil work i.e. Rs.7901844/- The amount of Insurance,Royalty, DMF,GST are Rs.1892789/- Total Tender amount may be Rs.9794633/- Please Enable Macros to View BoQ information |
