|
| 1 | Name Of Sub Estimate : Supply of materials |
| 2 | Providing and supplying ISI mark C.I. S&S pipes (push on jointspressure pipes of C.I of following class and diameters confirming to the I.S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality) excluding GST levied by GoI and GoM in all respect, Third party inspection charges of TPI Agency approved by MJP including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck,Transportation to departmental store/site of work,unloading, stacking etc completed as directed by Engineer – in-charge (IS 1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or latest edition / revision with amendments for Rubber Gaskets 100 mm |
| 3 | 150 mm |
| 4 | 200 mm |
| 5 | 25 mm |
| 6 | Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. b) Sluice valves - PN -1.0(With by pass arrangemnet) 100 mm diameter |
| 7 | 150 mm diameter |
| 8 | 200 mm diameter |
| 9 | 250 mm diameter |
| 10 | Supply of C. I. Mechanical Compression Collar Coupling suitable for C. I. Spun Pipes ( as per - IS - 1536 /2001) and complete with sealing rubber gasket of SBR,.C.I. follower Glands and M.S. nut Bolts.The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS: 1538/1993. 100 mm Diameter |
| 11 | 15 mm Diameter |
| 12 | 200 mm Diameter |
| 13 | 250 mm Diameter |
| 14 | Providing and supplying Air Valves as per IS- 14845 and MJP’sstandard specifications double orifice type combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ballseating on moulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unloading, transportation upto departmental stores, excluding GST levied by GOI & GOM in all respect etc. complete Air Valve Double Ball Flanged Type - P N-1 1) 50 mm |
| 15 | 2) 65 mm |
| 16 | MS specials of required thickness with 3 coats of approved make epoxypaint (Shalimar, Ciba or Mahindra & Mahindra make) from inside andoutside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores/site,and stacking, etc.complete. d)All socketed specials orsocketed branch flanged specials of all diameters. |
| 17 | Name Of Sub Estimate : Day to day maintenance of water supply distribution pipeline. Job work for attending breakdown of pipeline from 100 mm to 250 mm including excavation for CI pipe line of various diameters including marginal dewatering of trench, Opening the joints for repairing, refilling, etc. complete, including providing labors, fitters, sundry traffic control closing &opening of the sluice valves, tools and plants red flags etc. complete with attending breakdown within 24 Hr. as per the instructions of Engineer in charge etc. complete. 80 mm to 200 mm dia |
| 18 | 225 mm to 350-375mm dia |
| 19 | Providing and laying Cast in situ/ Ready Mix cement concrete in M15 oftrap/ granite/ quartzite/ gneiss metal for foundation and bedding/ stepsincluding steel centering, formwork, laying/ pumping, compacting,roughening the mif special finishis to be provided, finishing uneven andhoneycombed surface and curing etc. complete.The Cement Mortar 1:3plaster is considered for rendering uneven and honeycombed surface,only. Newly laid concrete shall be covered by gunny bag, plastic,tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic microprocess or based PLC with SCADA enabled reversible Drum Type mixer /concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 20 | Excavation for foundation / pipe trenches in hard murum andboulders, W.B.M. road includingremoving the excavated material uptoall lead distances beyond the area and lifts as below, stacking andspreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling,etc. complete. (Bd-A-3/259) For all Lifts |
| 21 | Excavation for foundation / pipe trenches in earth, soils of all types,sand, gravel and soft murum, including removing the excavatedmaterial upto all lead distance and lifts as below, stacking and spreadingas directed, normal dewatering, preparing the bed for foundation andexcluding backfilling, etc. complete. etc. complete. (Bd-A-3/259) For all Lifts. |
| 22 | Excavation for foundation / pipe trenches in soft rock and old cementand lime masonry foundation asphalt road including removing theexcavated material upto all lead distance and lifts as below, stackingas directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259) For all Lifts. |
| 23 | Excavation for foundation / pipe trenches in hard rock and concreteroad by chiselling, wedging, line drilling by mechanical means or by allmeans other than blasting including trimming and levelling the bed,removing the excavated material upto all lead distance and lifts as below, stacking as directed by Engineer-in-charge, normaldewatering, excluding backfilling, etc. complete by all means. (Bd-A-6/259) For all lifts |
| 24 | Lowering, laying and jointing in position following C.I.D/F Reflexvalves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for al Class of valves.) 100 mm |
| 25 | 150 mm |
| 26 | 200 mm |
| 27 | 250 mm |
| 28 | Rent for JCB |
| 29 | Rent for Crane |
| 30 | Rent for welding set with Generator |
| 31 | and pools of water in the building trenches / pipeline trenches, wellworks by using pumps and other devices including disposing off waterto safe distance as directed by Engineer-in-charge (including cost ofmachinery, labour, fuel), etc. complete. ( Bd-A 9/261) |
| 32 | Welding in all positions with required number of runs, for M. S. pipesinternally and / or externally including gauging wherevernecessary, fixing appurtenances and other accessories in connection with pipe laying work as per specification. Vi ) 10 mm. |
| 33 | Gas cutting (either square cut or cut) pipes, plates, etc. of thickness.iii) Above 10 mm. Upto 14 mm. |
| 34 | Job work for maintenance of distribution pipe line net work of aVarious diameter @T.S.T.P with daily patrolling up to 20. Hrsincluding attending the minor leakages without fails by fittergrade-I and 2 helpers with intimation to this office. The work should becarried out as per instruction of engineer in charge etc. complete.Considering one fitter grade I and one helper for attending the site andpatrolling the site from 9.00hrs to 17 hrs and rectification of minorleakages with material etc. complete |
| 35 | Job work for water meter reading of all type of water connection sizeswithin stipulated period feeding to computer preparing & printing waterbills as per direction & dispatching to all consumers keeping WS7 & WS8and all registers pertaining to water supply up to date work is to be carried as per enginer in charge. |
| 36 | Job work providing 24 hours Watch & ward of WTP+ESR+HSR Plot @Talawade Software Technology Park at Talawade by providing one helper in each shift. Please Enable Macros to View BoQ information |
