|
| 1 | Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damaes complete. (Concrete and brick work for mending damage will be paid separately) (a) Upto area 2.5 Sq.m |
| 2 | (b) Above area 2.5 Sq.m |
| 3 | Taking out M.S. or W.I. Grills from wooden frame including cutting lugs from masonry wall and refitting the same and mending good damages after repairs. (Excluding the cost of necessary repair of damages) or doing any other necessary works. |
| 4 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (A) In 10-12 Micron thickness Annodizing film I) Natural white a) 2- track sliding windowi) Bottom frame |
| 5 | ii) Top and side frame |
| 6 | b) 3- track sliding windowi) Bottom frame |
| 7 | ii) Top and side frame |
| 8 | d) Shutter for all track sliding window. i) Bottom & Top member |
| 9 | ii) Style side member. |
| 10 | iii) Interlock member. |
| 11 | g) Fixed glazing. i) Top, bottom and side member. |
| 12 | ii) Mullion |
| 13 | iii) Glazing clip. |
| 14 | k) Movable door shutter. i) Door frame. (Top & sides). |
| 15 | ii) Shutter : Top rail. |
| 16 | Bottom rail. |
| 17 | Lock rail. |
| 18 | Door vertical. |
| 19 | Glazing clip. |
| 20 | Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units:-(A) Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning ............... as per drawing, specification and direction of EIC. i ) 2 track sliding window. |
| 21 | ii ) 3 /4 track sliding window |
| 22 | iv ) Fixed glazing. |
| 23 | Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units:-(B) Partly glazed partly panelled or fully glazed single leaf alunminium swing door made of extruded and annodized alloy aluminium sections, ............. ...................as per drawing, specification and direction of Engineer in charge. |
| 24 | Supplying maruti lock (100mm) |
| 25 | Supplying EPDM gusket of approved make and brand as per direction of Engineer in charge. i) For sliding windows b) 'U' shaped EPDM gasket for frames. |
| 26 | iii) weather gasket / wool pile for door vertical. |
| 27 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987;iv) 5mm thick coloured / tinted / smoke glass. |
| 28 | Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work ........ labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surfacearea of ACP)(b) 4mm thick (0.50mm Al.+3.0mm LDPE +0.50mm Al. PVDF coating) |
| 29 | Wall panelling / partition with Melamine faced 3 layered flat pressed wood particle board of approved make and brand as per direction of Engineer - in Charge of requisite grade bonded with phenol formaldehyde synthetic resin conforming to IS: 848 - 1974 (excluding the cost of supporting frame work and teak wood battens / lipping)In Ground Floor (B) Prelaminated particle board conforming to IS: 3087 - 1985 and IS 12823 -1990. (ii) Both side decorative laminate (a) Exterior grade 9mm thick |
| 30 | 1st Floor |
| 31 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. G.F. (d) Sal : Local. |
| 32 | 1st Floor |
| 33 | Supplying, Fitting & Fixing Factory made prelaminated P.V.C. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm Prelaminated PVC sheet .................................... complete as per Manufacturer‟s specification and direction of Engineer-in-Charge. |
| 34 | Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor.(iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. |
| 35 | 1st Floor |
| 36 | Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in ground floor: (a) 35mm thick shutters (single leaf) |
| 37 | 1st Floor |
| 38 | PVC Door Shutter-30 mm thick:Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of 59 mm x30 mm section with 2.0 mm (+/-0.2 mm) wall thickness.............. .............. inclusive of cost of all materials, labour, and hire of tools and plants and appliancesi/c carriage of all materials taxes and all other incidental charges complete. |
| 39 | 1st Floor |
| 40 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (b) 40mm X 6mm, 200mm Length |
| 41 | Iron catch hook of approved quality fitted and fixed to shutter and chowkat.(e) 10mm dia x 450mm long. |
| 42 | (i) Door stopper.(Brass) |
| 43 | i) Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete ii) Godrej Hydraulic door closer fitted and fixed complete.(a) Heavy type |
| 44 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: (iv) 150mm long x 10mm dia. bolt. |
| 45 | Anodised aluminium skeleton bolt of approved quality manufactured from extruded section conforming to I.S: specification (I.S: 204/74) fitted and fixed with cadmiim plated screws: (iv) 300mm long x 12mm dia. bolt. |
| 46 | Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete.(iv) 300mm x 19mm dia. bolt. |
| 47 | Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws: (v) 100 x 63 x 3.2mm. |
| 48 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: (a) With continuous plate base (Hexagonal/ Round rod)(v) 125 mm grip x 12 mm dia rod. |
| 49 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (ii) Grill weighing above 16 Kg./sq.mtr and above |
| 50 | 1st Floor |
| 51 | (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 52 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary. (b) On steel or other metal surface : With super gloss (hi-gloss) - iv) Two coats (with any shade except white) |
| 53 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety |
| 54 | 1st Floor |
| 55 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary(Ground floor).[Excluding cost of chipping over concrete surface](ii) With 1:4 cement mortar(a) 20 mm thick plaster |
| 56 | 1st Floor |
| 57 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats |
| 58 | ADD GST @ 18.00% ON SUM OF AMOUNT Sl-01 to SL-30 |
| 59 | ADD Cess @ 1.00% ON SUM OF AMOUNT Sl-01 to SL-31 Please Enable Macros to View BoQ information |
