|
| 1 | Cabling |
| 2 | OD43544/2026-2027. Supply and drawing of 1.1 kV grade, PVC insulated and PVC sheathed Aluminium Aerial Bunched Cable (ABC), suitable for three-phase with neutral configuration, of the following size: 3C x 95 sq.mm + 1C x 70 sq.mm + 1C x 16 sq.mm, conforming to IS 14255 standards : 1995(Make: KEI, Havells, Polycab) |
| 3 | OD43545/2026-2027. Supply of 9 meter length PSC pole as per KSE Board specification at site. |
| 4 | Erection of RCC/ PCC pole of following length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete (1:3:6) layer on top with including excavation and refilling etc as required.Above 8.0 metre and upto 11.0 metre |
| 5 | Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stayclamps, turn buckle ( 20 mm X 60 cm ), 7/ 4.00 mm dia G.I. stay wire and straininsulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 40 mm nominal size ) foundation including excavation and refilling etc. asrequired. |
| 6 | Supply and fixing of stainless steel strap, suitable for tying clamps and cables to poles or pole structure elements, including stainless steel buckles as required. |
| 7 | Supply of the following accessories for hanging one number of PVC insulated andPVC sheathed Aluminium Aerial Bunched Cable (ABC) of 1.1 kV grade, 95 sq.mmsize, of reputed make: Anchoring Clamp |
| 8 | Supply of the following accessories for hanging one number of PVC insulated andPVC sheathed Aluminium Aerial Bunched Cable (ABC) of 1.1 kV grade, 95 sq.mmsize, of reputed make: Suspension Clamp |
| 9 | Supply of the following accessories for hanging one number of PVC insulated andPVC sheathed Aluminium Aerial Bunched Cable (ABC) of 1.1 kV grade, 95 sq.mmsize, of reputed make: Dead End Clamp |
| 10 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 240 sq. mm (62mm) |
| 11 | Supply and fixing of Insulation Piercing Connector (IPC), suitable for conductors of the following sizes: Main: 16-95 sq.mm Tap: 10-95 sq.mm |
| 12 | Supply and fixing of Insulation Piercing Connector (IPC), suitable for conductors of the following sizes: Main: 16-95 sq.mm Tap: 4-50 sq.mm |
| 13 | Supply and drawing of Nylon stay/string wire of minimum 4mm size |
| 14 | Supply & Drawing of Aluminium Weather proof wire of the following sizes: 2C*4sqmm |
| 15 | Supplying, installation, testing and commissioning of Astronomical time switch capable of following output in feeder pillars/ Lighting DBs for automatic switching On & OFF of street lights at sun set & sun ruse or twilight override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required. 1 output per phase and suitable for single phase supply |
| 16 | Supply and installation of 12A, 3-pole power contactor with single phase AC coil (suitable to mount in DIN rail) |
| 17 | Supplying and fixing of Sintex junction box for cable termination (340MM x 250MM x 150MM) along with MCB channel , terminal connectors and all interconnections etc. |
| 18 | Supply Conveyance, installation, testing and commissioning of 70W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) |
| 19 | Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.40 mm dia with clamps made from 20 x 3 mm MS flat Please Enable Macros to View BoQ information |
