|
| 1 | (A) Sinking of 200mm dia Production well |
| 2 | Supplying all materials,labour ,t&p for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by Mud Rotary Rig drilling as required to suit the site condition as per the direction of Engineer-in-Charge including use of own rigs with its accessories, tools and plant and consumables etc for lowering of finished bore suitable for lowering of 200 mm dia GI/PVC pipes for housing, fitted with socket and with or without well screen as per the necessity for the soft, medium, hard and boulder formation (GI/PVC casing pipes if required by the contractor to prevent collapse of over burden portion) including lower and withdrawing of casing pipe after drilling 200 mm to 450 mm dia in over burden portion. |
| 3 | From 0 to 100 mtr |
| 4 | From 101 to 200 mtr |
| 5 | From 201 to 300 mtr and above |
| 6 | Supplying all, labour,t&p for slot cutting in pvc pipe as per specification with lead all materials to site. |
| 7 | Supply of all labour & T&P for lowering the following size G.I./PVC pipes with or without slotted pipes as per the necessity from ground level and fitted and fixed up in perfectly vertical position, including cutting and threading pipe and slotted pipe and fixing all jointing materials etc.complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fittings & jointing materials. |
| 8 | Supplying all materials labour , t&p and grouting with cement slurry for saline sealing in the bore around 200mm dia PVC pipe properly as per the direction of Engineer-in-Charge. |
| 9 | Supplying all materials labour , t&p and grouting with cement slurry for sanitary sealing in the bore around the upper most 3 mtrs of 200 dia PVC casing pipe properly as per the direction of Engineer-in-Charge. |
| 10 | Supplying all materials, labour, tools and plant and packing the bore with washed gravel (size P-6) around the pipes in good quality including cost of gravel with lead of all materials to site. |
| 11 | Cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of Engineer-in-Charge. |
| 12 | Supplying all labour, t&p for earth work in excavation of all kinds of soil within 50m intial lead and1.5m initial lift including rough dressing and breaking the clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth as per direction of engineer in charge. |
| 13 | Supplying all materials, labour, t&p for filling sand infoundation and plinth, watered and rammed with lead of all materials to site. |
| 14 | Supplying all materials, labour, t&p and providing cement concrete (1:4:8) using 40mm size c.b.h g metal including hoisting, laying and curing with ead of all materials to site. |
| 15 | Supplying all materials, labour, t&p and providing cement concrete (1:2:4) using 12mm size c.b.h. g chips including hoisting, laying and curing with ead of all materials to site. |
| 16 | Supplying all materials, labour, t&p and providing brick work with fly ash bricks of size 25cmx12cmx8cm having crushing strength not less than 75kg/sqm in cement mortar (1:6) in foundation and plinth including curing with lead of materials to site. |
| 17 | Foundation & plinth(Borewell protection wall) |
| 18 | Superstucture |
| 19 | Supplying of following materials for installation of production well including testing with lead of all materials to site. |
| 20 | 200mm dia ASTM PVC pipe (sch-80) |
| 21 | 200mm dia ASTM PVC pipe (sch-120) |
| 22 | 200mm PVC conical plug |
| 23 | 200mmx600mm pvc short piece |
| 24 | 200mm dia PVC top cap |
| 25 | Supplying all materials, labour, tools and plant and with drawing casing pipe from the unsuccessful bore and depositing in the departmental store in good condition. |
| 26 | (B) Construction of pump house of size (3mx4m) |
| 27 | Supplying all labour, t&p and earth work in excavation of all kinds of soil within 50m intial lead and1.5m initial lift including rough dressing and breaking the clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth as per direction of engineer in charge. |
| 28 | Supplying all materials,labour,t&p for construction of R.C.C circular well ring 0.90m dia & 4cm thick with C.C (1:1.5:3) with 6mm size cbhg chips including reinforcement,centering and shuttering with lead of all materials to site. |
| 29 | R.C.C circular well ring 0.90m dia & 4cm thick |
| 30 | Supplying all materials, labour, t&p and providing shoring & shuttering foundation trenches pits etc. with close wooden planks or sheet shuttering etc. with lead of all materials to site. |
| 31 | Supplying all materials, labour, t&p and providing cement concrete (1:3:6) using 40mm size c.b.h g metal including hoisting, laying and curing with lead of all materials to site. |
| 32 | Supplying all materials, labour, t&p and providing brick work with fly ash bricks of size 25cmx12cmx8cm having crushing strength not less than 75kg/sqm in cement mortar (1:6) including curing with lead of materials to site. |
| 33 | Supplying all materials, labour, t&p and filling sand in foundation and plinth, well watered and rammed with lead of all materials to site. |
| 34 | Supplying all materials, labour, t&p and providing cement concrete (1:2:4) using 12mm size c.b.h. g chips including hoisting, laying and curing with lead of all materials to site. |
| 35 | Suppling all materials, labour, t&p and providing R.C.C M20 using 20mm & down grade size c.b. h.g chips including hoisting, laying, compacting and curing with lead of all materials to site. |
| 36 | Supplying all materials, labour, t&p and providing m.s reinforcement for R.C.C work including cutting, bending, binding and tying grills and placing inposition including cost of binding wire 18 to 20gague with lead of all materials to site. |
| 37 | Supplying all materials, labour, t & p and providing rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling then after casting complete in ground floor. |
| 38 | R.C.C. floor, roof slab, landing, balconies, chajjas. |
| 39 | R.C.C. foundation and plinth-band, column base. |
| 40 | R.C.C.beams, columns,griders and bressmere etc. |
| 41 | R.C.C.lintels |
| 42 | Supplying all materials, labour, t&p and providing brick work with fly ash bricks of size 25cmx12cmx8cm having crushing strength not less than 75kg/sqm in cement mortar (1:6) in superstructure including curing with lead of materials to site. |
| 43 | Supplying all materials, labour, t&p and providing 12mm thick cement plaster in (1:6) over brick work including curing with lead of all materials to site. |
| 44 | Supplying all materials, labour, t&p and providing 6mm thick cement plaster in (1:4) over R.C.C work in cealing including curing with lead of all materials to site. |
| 45 | Supplying all materials, labour, t&p and fixing tiles (non glazed tile vertified) in floors,treads of steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles with lead of all materials to site. |
| 46 | Supplying all materials, labour, t&p and providing 2.5cm. thick grading concrete with C.C(1:2:2) on roof slab with 6mm. size c.b h.g chips on new work including curing with lead of all materials to site. |
| 47 | Supplying all materials, labour, t &p and fitting & fixing of M.S.Door, window and grill gate etc. all complete. |
| 48 | Supplying all materials, labour, t&p and fitting and fixing of precast ventilator of 0.60m x 0.60m including all cost, taxes etc. all complete |
| 49 | Supplying all materials, labour, t&p and finishing walls with Weather coat paint of approved shade on new work two coats over one coat of priming to give an even shade with lead of all materials to site as per direction of Enginer in charge. |
| 50 | Supplying all materials, labour, t&p and painting two coats with plstic emulsion paints over one coat of priming with lead of all materials to site. |
| 51 | Supplying all materials, labour, t&p and painting two coats with enamel paints over a coat of primer including supply of paints etc. all complete. |
| 52 | (C) Construction of approach road- |
| 53 | Supplying all materials, labour, t&p and filling sand in foundation and plinth, well watered and rammed with lead of all materials to site. |
| 54 | Supplying all materials, labour, t&p and providing cement concrete (1:3:6) using 40mm size c.b.h g metal including hoisting, laying and curing with lead of all materials to site. |
| 55 | Supplying all materials, labour, t&p and providing cement concrete (1:2:4) using 12mm size c.b.h. g chips including hoisting, laying and curing with lead of all materials to site. |
| 56 | (D) Construction of compound wall & Grill gate. |
| 57 | Supplying all labour, t&p and earth work in excavation of all kinds of soil within 50m intial lead and1.5m initial lift including rough dressing and breaking the clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth as per direction of engineer in charge. |
| 58 | Supplying all materials,labour,t&p for construction of R.C.C circular well ring 0.90m dia & 4cm thick with C.C (1:1.5:3) with 6mm size cbhg chips including reinforcement,centering and shuttering with lead of all materials to site. |
| 59 | R.C.C circular well ring 0.90m dia & 4cm thick |
| 60 | Supplying all materials, labour, t&p and providing cement concrete (1:3:6) using 40mm size c.b.h g metal including hoisting, laying and curing with ead of all materials to site. |
| 61 | Supplying all materials, labour, t&p and filling sand in foundation and plinth, well watered and rammed with lead of all materials to site. |
| 62 | Supplying all materials, labour, t&p and providing cement concrete (1:2:4) using 12mm size c.b.h. g chips including hoisting, laying and curing with lead of all materials to site. |
| 63 | Supplying all materials, labour, t&p and providing R.C.C M20 using 20mm & down grade size c.b. h.g chips including hoisting, laying, compacting and curing with lead of all materials to site. |
| 64 | Supplying all materials, labour, t&p and providing m.s reinforcement for R.C.C work including cutting, bending, binding and tying grills and placing inposition including cost of binding wire 18 to 20gague with lead of all materials to site. |
| 65 | Supplying all materials, labour, t & p and providing rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling then after casting complete in ground floor. |
| 66 | R.C.C. foundation and plinth-band,footing,bases of column, mass concrete etc |
| 67 | R.C.C.beams, columns,griders and bressmere etc. |
| 68 | Supplying all materials, labour, t&p and providing brick work with fly ash bricks of size 25cmx12cmx8cm having crushing strength not less than 75kg/sqm in cement mortar (1:6) including curing with lead of materials to site. |
| 69 | Foundation & plinth |
| 70 | Superstructure |
| 71 | Supplying all materials, labour, t&p and providing 12mm thick cement plaster in (1:6) over brick work including curing with lead of all materials to site. |
| 72 | Supplying all materials, labour, t&p and finishing walls with Weather coat paint of approved shade on new work two coats over one coat of priming to give an even shade with lead of all materials to site as per direction of Enginer in charge. |
| 73 | Supplying all materials, labour, t &p and fitting & fixing of M.S. grill gate made out of Angle section,M.S flats, G.I sheets etc. all complete. |
| 74 | Supplying all materials, labour, t&p and painting two coats with enamel paints over a coat of primer including supply of paints etc. all complete. |
| 75 | (E) Internal Elecrification , Pumping Arrangement & Commissioning |
| 76 | Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth with lead of all materials to site.( Polycab / Havels / V Guard ) |
| 77 | Light point Group A |
| 78 | Recessed wiring for light / power plug with 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit alongwith 1 x 1.5 sq.mm F.R.P insulated single core multistrand copper conductor for loop earthing with lead of all materials to site. |
| 79 | Recessed wiring to submain in 4 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of I.S.Imarked confirming to IS-694/1990 in 32 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick alongwith 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required. |
| 80 | Supplying all materials, labour.t & p and wiring in existing surface/ conduit with insulated single core 10mm2 multistand copper conductor as required. |
| 81 | Supplying all materials, labour, t&p and fitting & fixing 200 Amp Bus Bar inside chamber. |
| 82 | Supplying all materials, labour.t & p and fitting and fixing 200 amp kit kats with lead of all materials to site.. |
| 83 | Supplying all materials, labour, t&p and fixing 25KA/3pole , 63Amp M.C.C.B with encloser with lead of all materials to site. |
| 84 | Supply, Installation, Testing, of 100 Amp TPN Main switches of following capacity (IS 13940 Part 3/1993 ) on existing surface/wall mountnting including interconnections, earthing, etc. as required as per direction of Engineer in Charge. |
| 85 | Supplying all materials,labour, t&p and fitting & fixing 10H.P three phase vertical submersible pump set having discharge 30cum/hr at 42m head including testing with lead of all materials to site. |
| 86 | Supplying all materials, labour, t&p, and fixing star delta control pannel of BCH/LT make for running of 10 H.P three phase submersible pump set including as per following accessories and testing. CT- switch, main contactor, auxilary contactor, over load relay (13-20Amp), Single phase preventer, Amp meter with selector switch,Volt meter with selector switch. phase indicator lamp and push botton switch. CT coil fixed inside metal box wit short circuit protection. |
| 87 | Supplying all materials, labour, t &p and making cable joints and testing motor as per direction of engineer in charge. |
| 88 | Supplying all materials, labour.t & p and fitting and fixing 6mm2 three phase submersible flat cable including testing |
| 89 | Supplying all materials, labour, t&p and earthing with G.I earth pipe 3meter long 40 mm dia ISI marked including accessories and providingmasonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required |
| 90 | Supplying all material, labour, t&p and laying 2.24mm dia bare copper wire as running earth and testing with lead of all materials to site. |
| 91 | Supplying all materials, labour, t&p and installation of timer switch of solid state electric control with on & off set point per circuit for delay schedule timing so as to automate the running of motor.The timing and set point shall be to nearest minute with suitable to function from 3 H.P to 30H.P range submersible motor at supply voltage 370 to 415 volt for three phase including testing. |
| 92 | Analog time switch |
| 93 | Supplying all materials, labour, t&p and fitting and fixing of 6 Amp catrige fuse & holder with lead of all materials to site. |
| 94 | Supplying all materials, labour, t&p and fitting and fixing of 16 Amp single pole M.C.B with lead of all materials to site. |
| 95 | Supplying all materials, labour, t&p and fixing of 25 Amp single phase two pole contactor. |
| 96 | Supplying all material, labour, t&p and fixing of LED indicator lamp (RYB) |
| 97 | Supplying all materials, labour, t&p and wiring with following FR PVC insulated (unseathed) single core copper wire as per direction of engineer in charge.1 mm2 single core copper wire |
| 98 | Supplying all materials, labour, t&p and fitting & fixing of 3 position. auto manual switch with adopter. |
| 99 | Supplying all materials, labour, t&p and fixing powder coated three phase meter box encloser of size 400mmx300mmx200mm with lead of all materials to site. ( BCH) |
| 100 | Supplying all materials, labour, t&p and fitting & fixing three way bakelite light connector. |
| 101 | Supplying all labour, t&p and assembling all componets & fixing timer including testing as per actual observation. |
| 102 | Supplying all materials, labour.t & p and fitting and fixing 250mm dia x 10mm thick M.S cover with nut bolt. |
| 103 | Supplying all materials, labour, t&p and fixing following galvanised mild steel tubes for making tripod including gas cutting , welding and testing as per specification all complete. |
| 104 | 25mm dia G.I pipe( medium class) |
| 105 | 80mm dia G.I pipe( medium class) |
| 106 | 20mm dia M.S rod hook with Nut&bolt |
| 107 | Cutting M.S pipe up 6mm thick |
| 108 | Fillet welding to M.S pipe up 6mm thick |
| 109 | Supplying all materials, labour, t&p and fixing galvanised mild steel tubes conforming to ( IS.1239 Part-1) & M.S specials, cutting, fabricating, welding pipes with existing pipe line/ laying, testing as per P.H specification and direction of engineer in charge. all complete with lead of all materials to site. |
| 110 | 80mm dia G.I pipe (Medium class) |
| 111 | 100mm dia G.I pipe (Medium class) |
| 112 | 80mm dia M.S flange |
| 113 | Supplying all materials,labour and t&p and fixing of cast iron sluice valve with double flanged ends for water works purposes of the following rating and diameter diameter including testing of joints as per specification all complete. |
| 114 | 100mm dia C.I sluice valve(P.N-1.6) |
| 115 | 100mm dia M.S flange |
| 116 | 100mm dia G.I offset bend with M.S flange |
| 117 | 100mm x100mm dia G.I Tee with M.S flange |
| 118 | Cutting M.S pipe up 6mm thick |
| 119 | Fillet welding to M.S pipe up 6mm thick |
| 120 | Supplying all materials,labour and T&P and making flanged joints for P.V.C./G.I pipes and specials of the following diameter including testing of joints as per specification all complete. |
| 121 | 80mm dia flanged joint. |
| 122 | 100mm dia flanged joint. |
| 123 | Supplying all materials,labour and T&P for fixing of ductile iron Air valve for water works purposes of the following diameter including drilling the water main . |
| 124 | 25mm dia D.I air valve. |
| 125 | Supplying all materials, labour, t&p and fixing of caste iron N.R valve with double flanged ends for water works purposes of the following rating and diameter including testing of joints as per specification all complete. |
| 126 | 100mm dia C.I N.R valve(P.N-1.6) |
| 127 | Laying of distribution pipe network - |
| 128 | Supplying all labour, t&p and dismantling of concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02cum in volume and stock pilling at designated location and disposal of dismantaled materials up to a lead of 1000mtrs, stacking serviceable and unserviceable materials separately. |
| 129 | Supplying all labour, t&p and dismantling of Granular courses of flexible pavement and disposal of dismantled materials uo to a lead of 1000mtrs ans stacking serviceable and unserviceable materials separately. |
| 130 | Supplying all labour, t&p and earth work in excavation of all kinds of soil within 50m intial lead and1.5m initial lift including rough dressing and breaking the clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth as per direction of engineer in charge. |
| 131 | Supplying all materials, labour, t&p and filling sand in pipe line trench well watered and rammed with lead of all materials to site. |
| 132 | Supplying all labour, t&p and earth work in filling in all kinds of soil including watering and ramming not exceeding 0.30 m in depth as per direction of engineer in charge. |
| 133 | Supplying all labour, t&p and laying in trenches Centrifugally Cast (Spun) Ductile Iron socket and spigot pipes of Class-K 7 without cement mortar lining conforming to I.S. 8329:2000 of the following nominal diameter as per specification, complete for push on rubber gasket jointing with lead of all materials to site. |
| 134 | 150mm dia K-7 D.I pipe |
| 135 | 100mm dia K-7 D.I pipe |
| 136 | Supplying all materials,labour, t&p and fitting & fixing D.I specials in pipe line and testing with lead of all materials to site. 7.5% wt. of pipe) |
| 137 | Supplying all materials, labour, t&p and making baricate for protection aginast work & traffic using nonsal bullah 80mm dia for struttin and necessary plank for guard with lead of all materials to site. |
| 138 | Supplying all labour, t&p and removing of excess earth & debries and disposing within 5 Km range including transportation as per the direction of Engineer-in-charge. |
| 139 | Supplying all materials, labour, t&p and providing Push-on-Joint conforming to I S :3114-1994 to Centrifugally spun using rubber Gaskets conforming to Is: 5382 of SBR Quality including testing of the joints as per P.H specification. |
| 140 | 150mm dia push on joint.( Excluding cost of rubber gasket) |
| 141 | 150mm dia push on joint.( Including cost of rubber gasket) |
| 142 | 100mm dia push on joint.( Excluding cost of rubber gasket) |
| 143 | 100mm dia push on joint.( Including cost of rubber gasket) |
| 144 | Supplying all materials, labour, and making flanged joints for D.I. pipes and specials of the following diameter including testing of joints as per specification all complete. |
| 145 | 150mm dia flanged joint. |
| 146 | 100mm dia flanged joint. |
| 147 | Supplying all material, labour, t&p and providing dewatering by 5 H.P diesel engine pumpset from pits including hire charges of pumps with lead of all materials to site |
| 148 | Supplying all materials,labour, t&p and fixing of ductile iron Air valve for water works purposes of the following diameter including drilling the water main (cast iron pipes with metal straps). |
| 149 | 25mm dia D.I air valve. |
| 150 | Supplying all materials,labour and T&P for fixing of cast iron sluice valve or non-return valve with double flanged ends for water works purposes of the following rating and diameter diameter including testing of joints as per specification all complete.( Kilosker/Vag /Audco/Equivalent make) |
| 151 | 150mm dia C.I sluice valve(P.N-1.6) |
| 152 | 100mm dia C.I sluice valve(P.N-1.6) |
| 153 | Supplying all materials, labour, t&p and constructing brick masonry chamber sluice valve chamber with Fly ash bricks and providing cement concrete (1:4:8) with 40mm size hgcb metal in foundatin bed brick work CM (1:3) with brick work having crushing strength not less than 75 kg/cm2 with 12mm cement plaster (1:3) on both side including providing ,R.C.C cover slab of 100 mm thick in cement concrete(1:1.5:3) using 20mm and down graded h.g. c. b chips and 10mm dia MS rod spacing 125mm c/c and refilling the sides with the excavated earth including watering and ramming with lead of all materials to site. |
| 154 | Earth work in excavation of all kind of soil |
| 155 | C.C (1:4:8) with 40mm size h.g metal |
| 156 | Fly ash brick work in cement mortar (1:3) |
| 157 | 12 mm thick Cement plaster in C.M (1:3): |
| 158 | R.C.C. (1:1.5:3) with 12mm. size h.g. chips |
| 159 | Centering and shuttering: |
| 160 | M.S. reinforcement @ 0.80 qntl./cum of R.C.C. |
| 161 | Earth work in filling: |
| 162 | Supplying all materials, labour, t&p and laying ,fitting & fixing following galvanised mild steel tubes conforming to( IS.1239 Part-1) including testing as per specification all complete. |
| 163 | 150mm dia G.I pipe( medium class) |
| 164 | 100mm dia G.I pipe( medium class) |
| 165 | Supplying all materials, labour, t&p and fitting & fixing specials in pipe line and cutting & welding of pipe line etc. with lead of all materials to site. |
| 166 | 150mm dia M.S flange |
| 167 | 100mm dia M.S flange |
| 168 | 150mm dia G.I flanged bend with M.S flange 90 0 |
| 169 | 150mm x100mm dia G.I flanged Tee with M.S flange |
| 170 | 100mm dia G.I flanged bend with M.S flange 90 0 |
| 171 | Cutting M.S /D.I pipe up 6mm thick |
| 172 | Fillet welding to M.S pipe up 6mm thick |
| 173 | Supplying all materials, labour, t&p and providing cement concrete (1:4:8) using 40mm size c.b.h g metal including hoisting, laying and curing with ead of all materials to site. |
| 174 | Supplying all materials, labour, t&p and providing cement concrete (1:2:4) using 12mm size c.b.h g metal including hoisting, laying and curing with ead of all materials to site. Please Enable Macros to View BoQ information |
