Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Civil Work Earth work and Plain cement concrete: Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil DSR-2023-2.28.1 |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width aswell as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer in charge.All kinds of soil DSR-2023-2.6.1 |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. DSR-2023-2.25 |
| 4 | Supplying chemical emulsion in sealed containers including delivery asspecified.Chlorpyriphos/ Lindane emulsifiable concentrate of 20% Treatment of soil under floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the floor: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration (DSR-2023 2.35.3.1) |
| 5 | Plain Cement Concrete: Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) DSR-2023-4.1.8 |
| 6 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. DSR-2023-4.17 |
| 7 | Reinforced Cement Concrete Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases and foundations for shed columns. DSR-2023-5.9.1 |
| 8 | Suspended floors, Roofs,Balcony etc. DSR-2023-5.9.3 |
| 9 | Lintels,Beams,plinth Beams etc. DSR-2023-5.9.5 |
| 10 | Columns, piers, abutments, pillars, posts and struts. DSR-2023-5.9.6 |
| 11 | Stairs, (excluding landings) except spiral-staircases. DSR-2023-5.9.7 |
| 12 | Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like. DSR-2023-5.9.15 |
| 13 | Extra for arches, domes, vaults exceeding 6 m span. DSR-2023-5.9.10 |
| 14 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.: All works upto plinth level: Concrete of M30 grade with minimum cement content of 350 kg /cum. DSR-2023-5.33.1.2 |
| 15 | All works above plinth level up to floor V level: Concrete of M30 grade with minimum cement content of 350 kg /cum. DSR-2023-5.33.2.2 |
| 16 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto Plinth level. Total reinforcement. DSR-2023-5.22.6 |
| 17 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Total reinforcement. DSR-2023-5.22A.6 |
| 18 | Brick work and Painting: Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand). DSR-2023-6.1.2 |
| 19 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand). Total Brick work. DSR-2023-6.4.2 |
| 20 | 12 mm thick plaster in 1:6 with cement & c. sand mortar as per require(DSR 2023-13.4.2) |
| 21 | P/L white cement based wall putty two coat complete as per (DSR-13.8) |
| 22 | P/L two coat of outer exterior primer on wall. (DSR 2023-13.46.1) |
| 23 | Finishing wall with synethic enamel paint of interior grade additive of required shade (DSR 2023-13.61.1) |
| 24 | Finishing wall with Premium Acrylic smooth exterior paint with silicone additive of required shade (DSR 2023-13.47.1) |
| 25 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. (DSR 2023-14.72) |
| 26 | Doors And Windows: UPVC windows using R4 series with frame (64 mm & above) x (50 mm x above) & sash(64 mm & above) x (70 mm x above) with profile white track with casement door sash, lock with handlewith all respect to (DSR-2023 9.147.E1.3). |
| 27 | UPVC door using R3 series with frame (50 mm & above) x (50 mm x above) & sash(55 mm & above) x (85 mm x above) & french mullion (55 mm & above) x (60 mm x above) with profile white track with casement door sash, lock with handlewith all respect to (DSR-2023 9.147.F2.1). |
| 28 | Providing edge moulding outside of upvc work to 18 mm thick granite Complete as per (DSR 2023-8.3.2) |
| 29 | Tile work: Providing and laying vrtrified floor tiles with difference thickness specified by manufacture with water absorpition less then 8% and conforming to IS 15622 of approved make in all colours and shade laid on 20mm thick cement mortar 1:4 cement and coarse sand including grouting the joints with white cement and maching pigment e.t.c. DSR-2023-11.41.2 |
| 30 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm DSR-11.46.2 |
| 31 | Drainage: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing ofjoints complete as per direction of Engineer in Charge. 100mm dia. Nominal dia pipe. DSR-2023-18.9.9 |
| 32 | Cutting hole upto 15x15 cm in R.C.C. floora and roofs for passingdrain pipe etc.with cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm. nominal size)including finishing complete so as to make it leak proof. DSR-2023-18.77 |
| 33 | Roofing: Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase. DSR-2023-12.21.1 |
| 34 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (A) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm, (B)laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (C)Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (D)fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured. DSR-2023-22.6 |
| 35 | Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. DSR-2023-12.53 |
| 36 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). DSR-2023-10.28 |
| 37 | Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approvedmake, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall i`nclude all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding,other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener,anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing includingthickness of joints and the portion of Glass panel inside the SS channel shall be measured. DSR-2023-25.8 |
| 38 | Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical localtion in load application areas that accommodates multi directional seismic movement without stress to it's components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various projectconditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self- centering arrangement that freely rotates / moves in all directions. The Self - centering arrangement shall exhibit circular sphere ends that lock and slide inside the orresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in Charge. (Material shall confirm to ASTM 6063). Floor Joint of 100 mm gap. DSR-2023-5.44.1 |
| 39 | Providing and fixing of expansion joint system related with wall joint (internal/external) location as per drawings and direction of Engineer-In Charge. The joints shall be of extruded aluminum base members, selfaligning / centering arrangement and support plates as per ASTM B22102. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with noslipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063). Wall Joint of 100 mm gap. DSR-2023-5.45.1 |
| 40 | FIRE PROTECTION SYSTEM PUMPS: (A) (a) Supplying, installation, testing and commissioning of electric driven terrace pump conforming to IS 12469: 2019 suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump). (b) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal as required. (c) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class- 'F' insulation, conforming to IS-12615: 2018. (d) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. (e) Suitable cement concrete foundation duly plastered and with anti vibration pads. 27.4.1 900 lpm at 35 m Head Each 107744.00Supplying Installation , testing and commissioning of , complete in all respects , as required: (TERRACE Pump). 900 lpm at 35 m Head. DSR-2025 (EM)- 27.4.1 |
| 41 | Poviding laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 1239/3589 i/c fitting like elbow, tees, flanges,tapers, nuts bolts , gaskets etc. in ground including welding excavations & providing cement concrete blocks as supports , anticorrosive tratment with coltar / asphalt tape as pr IS 10221, refilling the trench etc. of following sizes complete as required. 150 mm dia. DSR-2025 (EM)-27.6.2 |
| 42 | Poviding laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including welding ,fitting like elbow, tees, flanges,tapers, nuts bolts , gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint required shade complete as required: 65 mm dia. DSR-2025 (EM)-27.7.5 |
| 43 | 80 mm dia. DSR-2025 (EM)-27.7.6 |
| 44 | 100 mm dia. DSR-2025 (EM)-27.7.7 |
| 45 | 150 mm dia. DSR-2025 (EM)-27.7.8 |
| 46 | Supplying ,fixing,testing and commissioning of Butterfly valve of PN 1.6 rating ISI marked complete with ns, bolts, washers,gaskets conforming ti IS 13095 of following sizes as required : 65mm dia. DSR-2025 (EM)-27.11.3 |
| 47 | 80 mm dia. DSR-2025 (EM)-27.11.4 |
| 48 | 100 mm dia. DSR-2025 (EM)-27.11.5 |
| 49 | 150 mm dia. DSR-2025 (EM)-27.11.6 |
| 50 | Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. DSR-2025 (EM)-27.13 |
| 51 | Providing, fixing, testing & commissioning of resilient Rubber bellows single arch vibration eliminators suitable for raw water up to 45 deg. C temperature, working pressure 8.5 Kg/cm2 and test pressure 14 Kg/cm2 to provide relief from stresses at pipe flanges. It should be complete as per manufacturer's specifications & as 150 mm dia |
| 52 | Providing , Intalllation, testing and commissioning of Non - Return valve of following sizes complete with rubber gasket, GI bolts, nuts, washers etc. as required: 150 mm dia. DSR-2025 (EM)-27.14.7 |
| 53 | Providing , Intalllation, testing and commissioning of Y-strainer fabricated out of 1.6 mm thick stailnless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. 150 mm dia. DSR-2025 (EM)-27.15.3 |
| 54 | Providing fixing, testing & commissioning of Foot Valve connection 150 mm |
| 55 | Providing, fixing, testing & commissioning of Air release valve with 25mm dia |
| 56 | Providing and fixing of Pressure switch in M.S. pipe line including connection etc. as required. DSR-2025 (EM)-27.22 |
| 57 | Providing and fixingin position the industrial type Pressure gauge with brass valve complete as required. |
| 58 | Supplying & fixing single headed External yard hydrant valve with 1 No.63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (Tpe- A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Stainless steel. DSR-2025 (EM)-27.10.2 |
| 59 | Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required. Single headed Stainless steel. DSR-2025 (EM)-27.9.2 |
| 60 | Supplying and fixing 63 mm dia, 30 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets conforming to IS 636 (type-A) as required : Stainless Steel (Grade 304). DSR-2025 (EM)-27.16.2 |
| 61 | Supplying and fixing first - aid Hose Reel with MS construction spray painted in post office red, conforming ti IS 884 complete with the following as required : (a) 20 mm nominal internal dia water hose thermoplastic (Textile reinforced ) type-2 as per IS: 12585, (b) 20 mm nominal internal dia gun metal globe valve & nozzle. (c ) Drum and brackets for fixing the equipments on wall. (d) Connections from riser with 25 mm dia stop gun metal valve & M.S. pipe and socket. 30m. DSR-2025 (EM)-27.17.1 |
| 62 | Supplying and fixing 63 mm dia, gun metal short branch pipe with 20 mm nominal internal diameter size nozzle confoming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required: Stainless Steel (Grade 304). DSR-2025 (EM)-27.18.2 |
| 63 | Supplying and fixing of fire brigade connection of cat iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 3-way -150 mm dia M.S. Pipe. DSR-2025 (EM)-27.19.3 |
| 64 | Supply, installation, testing and commissioning approved make ball valves with screwed ends confirming to IS 1703 -1977 with unions, etc.including all the necessary fixing materials complete.MR 50mm dia |
| 65 | 40mm dia |
| 66 | Providing and fixing standard fire mans axe with heavy duty insulated rubber handle.MR |
| 67 | ISI marked Carbon di-oxide type fire extinguisher, Capacity 4.5 kg, Filled with CO2 gas having purity 99.7% complied with IS 15222, manufactured and tested as per IS 15683: 2018, Fire Rating 55B, Wheel Type valve made of brass conforming to IS 3224, In-built Pressure relief device (Fusible plug and Rupture Disc Type), ISI marked CO2 cylinder conforming to IS 7285 Part 1 or Part 2, High glossy PU paint for anticorrosion on external surface, Metal wire braided hose shall have minimum bursting pressure of 250 Kgf/cm2. Horn with metallic thread connection, Body Handle with Rubber Grip, Aluminium siphon tube (Grade as per IS 738), Wall mounting brackets & screws, Cylinder body punched with Year of manufacturing and test pressure as per BIS requirement, UV resistant Vinyl label, QR code for product traceability, Testing and Inspection - As per IS 15683:2018 CE and EN 3-7 & 8 ,MR |
| 68 | ISI Marked Dry Powder Agent ABC Type Fire Extinguisher, Capacity 6 Kg MAP 90%, Fire rating 4A 144B, Deep drawn cylinder body, Internal and external surface of cylinder pure polyester powder coated for corrosion resistance, Squeeze Grip Valve with OEM Brand made of forged brass with nickel chromium plating, In built pressure release device & NRV at pressure gauge mounting port, Polyvinyl Chloride Siphon Tube, Stainless Steel safety pin, EPDM hose with Nylon 6 nozzle, Nozzle fitted with brass threaded insert and blow off cap, High Quality Vinyl label, QR code for product traceability, Testing and Inspection - As per IS 15683:2018. CE and EN 3-7 & 8 ,MR |
| 69 | Supply, installation, testing and commissioning of outdoor fire hydrant hose cabinet (double door type) fabricated from 16 SWG CRCA mild steel sheet, of size approx. 750 mm (H) × 600 mm (W) × 300 mm (D), suitable to house two numbers of 63 mm dia × 15 m long RRL hose pipes with coupling, one branch pipe and nozzle. The cabinet shall be of double-door construction with stainless steel hinges, locking handle, and stay-arms, provided with 4 mm thick clear acrylic front vision panel, continuous EPDM/neoprene rubber gasket for weatherproofing, ventilation louvers, and finished with epoxy-based powder coating in fire red shade (RAL 3001) over anti-corrosive primer. The cabinet shall be weatherproof, lockable and wall/pedestal mounted on suitable angle iron frame, and supplied with all fixing hardware and accessories.MR |
| 70 | FIRE ALARM: INTELLIGENT FIRE ALARM SYSTEM, Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5 % V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications.MR. Four loop panel |
| 71 | Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required. DSR-2025 (EM)-28.2.4 |
| 72 | Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required. DSR-2025 (EM)-28.2.5 |
| 73 | Supplying, installation, testing & commissioning of intelligent address -able programmable sounder complete as required. DSR-2025 (EM)-28.2.6 |
| 74 | Supplying, installation, testing & commissioning of fault isolator compl-ete with base as required. DSR-2025 (EM)-28.2.7 |
| 75 | Supplying, installation, testing & commissioning of addressable fire control module complete as required. DSR-2025 (EM)-28.2.10 |
| 76 | Supplying, installation, testing & commissioning of addressable phone control module complete as required. DSR-2025 (EM)-28.2.11 |
| 77 | Supplying, installation, testing & commissioning of intelligent addres-sable duct detector including suitable Photo detector complete with base as required. DSR-2025 (EM)-28.2.13 |
| 78 | Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required. DSR-2025 (EM)-28.2.15 |
| 79 | Supplying, installation, testing & commissioning of addressable manual call point complete as required. DSR-2025 (EM)-28.2.14 |
| 80 | Supplying, installation, testing & commissioning of fire fighter tele-phone handset complete as required. DSR-2025 (EM)-28.2.17 |
| 81 | Supplying, installation, testing & commissioning of of Intelligent Addr-essable, Supervised Monitor Module monitoring Potential-free, Normally Open Dry Contact input. The Monitor Module shall have operating temperature range from 0°C to 70°C and a humidity tolerance of up to 93% RH, Non-Condensing with weatherproof enclosure,MR |
| 82 | CABLING & WIRING: Supplying & laying of 2x1.5 sqmm fire survival armoured cable,600 /1000V rated with annealed copper conductorhaving glass mica fire barrier tape covered by an extrudedlayer of Cross Linkable Ethylene Propylene Rubber (EPR)insulation and LSZH inner bedding,steel wire armouring &LSZH outer sheath complete as required. DSR-2025 (EM)-28.5.1 |
| 83 | Public Address System: Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required. DSR-2025 (EM)-28.3.1 |
| 84 | Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required. DSR-2025 (EM)-28.3.2 |
| 85 | Supplying, installation, testing & commissioning of ceiling/wall mounted loud speaker, 3/1.5 Watt in ABS enclosure complete as required. DSR-2025 (EM)-28.3.4 |
| 86 | Supplying, installation, testing & commissioning of digital audio amplifier 50 Watt, 25V rms operating at 240 volt AC supply complete as required. DSR-2025 (EM)-28.3.6 |
| 87 | Supplying, installation, testing & commissioning of Voice command key-pad 6 zone, with microphone assembly complete as required. DSR-2025 (EM)-28.3.9 |
| 88 | Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. speaker cable Two pair, 2-core, 1.5 sqmm. DSR-2025 (EM)-28.5.3.2 |
| 89 | Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required. DSR-2025 (EM)-28.5.4 |
| 90 | INTERNAL W/S & SANITATION WORKS: Providing, fixing, testing and commissioning of white vitreous china wall mounted type European water closet with C.P. bolts, nuts, C.I. chair (painted with two coats of enamel paint over a coat of primer) or other hanging arrangements, built-in concealed/exposed white vitreous china low volume compatiable dual flush cistern (Flowrate as 4/2 Lit per Flush) with C.P. bolts, nuts, supporting arrangements, bakelite / poly propylene seat & cover with C.P. hinges & rubber buffers, complete with all accessories. Including cutting & making good the walls & floors wherever required complete as per the satisfaction of the Engineer in charge. |
| 91 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid. DSR-2023-17.2.1 |
| 92 | Providing and Fixing Handicap Toilet set including EWC, Cistern, Seat Cover, Fittings, Washbasin,, Hinged Rail, Grab Bar and Faucet with Spatula Lever including Cast Iron chair backed and necessary bolts and nuts complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required as per technical specifications, provided drawings by architect,techincal specification and as directed by the authority EIC. including Toilet Set(Jaquar - CNS-WHT-755SN)+ Cistern Set(CNS-WHT-207)+ Wash Basin(CNS-WHT-811) and Grab Bar(WAC-WHT-BG0800 & WAC-WHC-BR0600 ) as directed by EIC. MR |
| 93 | Supply, installation , testing & commissioning Health Faucet ABS with double lock 1.2 m long SS flexible hose and wall hook including CP flange.15mm dia. MR |
| 94 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer :- : White vitrious china wash basin. DSR-2023-17.7A |
| 95 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required Size 450x300x150 mm. DSR-2023-17.11.1 |
| 96 | Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. DSR-2023-17.22A |
| 97 | Providing and fixing toilet paper holder : Vitreous china . DSR-2023-17.34.2 |
| 98 | Providing & Fixing of C.P. brass robe hook with all accessories as required and making good the walls wherever required. MR |
| 99 | Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. DSR-2023-17.80 |
| 100 | Providing and fixing CP 600mm long Brass towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. DSR-2023-17.73 |
| 101 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.. DSR-2023-17.33 |
| 102 | Providing and fixing C.P. brass bib cock of approved quality. 15 mm nominal bore. DSR-2023-18.49.1 |
| 103 | Providing, fixing, testing and commissioning of C.P. brass angle valve with C.P. wall flange, Nut and Washer etc. complete as required. 15 mm nominal bore DSR-2023-18.53.1 |
| 104 | Supply, installation , testing & commissioning of 15mm CP brass single lever concealed bath and shower wall mixer with divertor with 3 way shower head, spout, OH shower with adjustable type arm with wall flange with slip fit connection & hand shower with flexible pipe with bracket complete as required by the engineer in charge. DSR-2023-17.22B |
| 105 | Supply, installation , testing & commissioning of Soap Dispenser with all accessories as required and making good the walls wherever required. DSR-2023-17.71 |
| 106 | Providing and fixing solid state, no touch operting, fully hygienic hand drier of approved shade with single blower, with time delay, summer & winter control, music while drying, volume ON/OFF controls including providing necessary brackets, cable from drier to Plug, Plug top key and lock etc, complete as required. MR |
| 107 | Supply, installation , testing & commissioning of C.P Towel ring with all accessories as required and making good the walls wherever required. DSR-2023-17.73 |
| 108 | INTERNAL DRAINAGE: Supply, installation, testing and commissioning of uPVC SWR Type-B pipes conforming to IS 13592 with fittings to IS 15328, ring-fit (RRJ) joints with EPDM rubber rings conforming to IS 5382, suitable for soil, waste and rainwater discharge. All pipes shall be fixed on surface / on wall using GI/MS band clamps with EPDM lining at required intervals, including making holes in walls/ceilings, sleeves, supports, anchor fasteners, cutting/chamfering, lubrication, alignment, leak testing, cleaning, painting/marking, and making good the surfaces complete in all respects.MR. Internal Toilet (Soil & Waste Pipe): 75 mm |
| 109 | Internal Toilet (Soil & Waste Pipe): 110 mm |
| 110 | Exposed on Wall (Soil & Waste Pipe): 110 mm |
| 111 | Exposed on Wall (Soil & Waste Pipe): 160 mm |
| 112 | Providing, Installing, testing and commisssioning UPVC Multi trap of self cleansing design with or without vent arm with provision for connecting upvc inlet fitttings complete including cost of cutting and making good the walls and floors where ever required complete in all respects with necessary arrangements with proper care at all levels, protecting fittings and floor trap till the final handing over etc as per technical specifications, provided drawings by architect and as directed by the authority EIC. (make:Astral,Ashirvad & supreme)MR |
| 113 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.MR |
| 114 | Bend without door (45°): 110mm MR |
| 115 | Bend without door (45°):160mm MR |
| 116 | Bend without door (87.5°) 110mm. MR |
| 117 | Bend without door (87.5°) 160mm. MR |
| 118 | Y' Fitting without door MR. 110mm |
| 119 | Y' Fitting without door MR. 160mm |
| 120 | Clean Out Plug (COP) MR. 110 mm |
| 121 | Clean Out Plug (COP) MR. 160mm |
| 122 | Reduced 'Y' Fitting without door. MR 110mm x 75mm |
| 123 | Reduced 'Y' Fitting without door. MR 160mm x 110mm |
| 124 | Coupler. MR 110mm |
| 125 | Coupler. MR 160mm |
| 126 | Vent Cow. MR. 110mm |
| 127 | DOMESTIC WATER SUPPLY: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm dia pipe. DSR-2023-18.7.1 |
| 128 | 20 mm dia pipe. DSR-2023-18.7.2 |
| 129 | 25 mm dia pipe. DSR-2023-18.7.3 |
| 130 | 32 mm dia pipe. DSR-2023-18.7.4 |
| 131 | 40 mm dia pipe. DSR-2023-18.7.5 |
| 132 | 50 mm dia pipe. DSR-2023-18.7.6 |
| 133 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. 15 mm dia nominal bore. DSR-2023-18.8.1 |
| 134 | 25 mm dia nominal bore. DSR-2023-18.8.2 |
| 135 | 32 mm dia nominal bore. DSR-2023-18.8.3 |
| 136 | Supply, installation , testing & commissioning of Nytril Rubber Insulation and polyshield outer mechanical protection (comprising of wrapping with poly glass tape helically wound and subsequently applying 2 coats of polyshield material (resin & hardner) as per manufacturers specification) on Hot and chilled water supply lines having thermal conductivity .038 W/mok 0.212 BTU / (Hr-ft2-oF/inch) at an average temperature of 30oC ,temperature range of –40oC to 105oC,Density of material shall not be less than 0.06 gm/cm3, class O type, complete as per manufacturer recommendation. 19 mm. |
| 137 | 25 mm. |
| 138 | Supply, installation , testing & commissioning of male/ female screwed end full way lever operated forged brass ball valve(PN 16) of brass body with brass ball & teflon seat tested to a pressure 24 Kg / sqcm with (threaded joints) complete as required. 15 mm nominal bore. DSR-2023-18.18.1 |
| 139 | 20 mm nominal bore. DSR-2023-18.18.2 |
| 140 | 25 mm nominal bore. DSR-2023-18.18.3 |
| 141 | 32 mm nominal bore. |
| 142 | 40 mm nominal bore |
| 143 | Supply, Installation, Testing and commissioning of slim seal type C.I. Butterfly valve confirming to IS 13592 (Body : Grey Cast Iron, shaft : SS, Disc : SG Iron (Rilson coated), Liner : HT - EPDM) of approved make with PN 16 rating flange dimensions shall be confirming to IS 6392, washer, nuts & bolts. Rated to temperature of 85 Deg C and tested to a pressure not less than 24 Kg/Sq.cm. 50 mm nominal bore |
| 144 | 65 mm nominal bore |
| 145 | 80 mm nominal bore |
| 146 | Supply, installation , testing & commissioning of gun metal vertical non return valve conforming to IS 778 of approved quality (screwed end) including union, nipple, fixing on pipe complete as required.(PN 16). 50 mm nominal bore. DSR-2023-18.19.4.2 |
| 147 | 65 mm nominal bore. DSR-2023-18.19.5.2 |
| 148 | Providing, fixing, testing and commissioning of CI `Y' strainer for pressure of 16 kg / sq.cm with bronze perforated sheet basket including rubber gasket, flanges ( test pressure of 24 kg / sqcm), nuts, bolts and washers, panting of the same complete as required and suitable for system pressure. 50 mm dia |
| 149 | 65 mm dia |
| 150 | Providing and fixing motorized valve including control wiring upto panel & ON/OFF arrangement and all other accessories required to make the system complete including control unit to be made of good quality PVC box, as per IP 65 with cable gland also as per IP 65 and suitable for outdoor installation complete with suitable wiring. This unit should be suitable to operate solenoid valve, float switch and consisting of contactors, control transformer, MCB, Potential free contacts for BMS, indicating lamp for automatic operation of filling OH tank with level to be maintioned between 70% (low) to 100% (full). 50 mm nominal bore |
| 151 | WIRING IN STEEL AND PVC CONDUIT: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group B. DSR-2025 (EM)-1.10.2 |
| 152 | Group C. . DSR-2025 (EM)-1.10.3 |
| 153 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. DSR-2025 (EM)-1.11 |
| 154 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. DSR-2025 (EM)-1.12 |
| 155 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire. DSR-2025 (EM)-1.14.1 |
| 156 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire. DSR-2025 (EM)-1.14.2 |
| 157 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire. DSR-2025 (EM)-1.14.4 |
| 158 | 4 X 6 sq. mm + 2 X 6 sq. mm earth wire. DSR-2025 (EM)-1.14.9 |
| 159 | 4 X 10 sq. mm + 2 X 6 sq. mm earth wire. DSR-2025 (EM)-1.14.10 |
| 160 | 4 X 16 sq. mm + 2 X 6 sq. mm earth wire. DSR-2025 (EM)-1.14.11 |
| 161 | Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair. DSR-2025 (EM)-1.18.2 |
| 162 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. DSR-2025 (EM)-1.19 |
| 163 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm. DSR-2025 (EM)-1.21.1 |
| 164 | 25 mm. DSR-2025 (EM)-1.21.2 |
| 165 | 32 mm. DSR-2025 (EM)-1.21.3 |
| 166 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Telephone socket outlet. DSR-2025 (EM)-1.24.6 |
| 167 | TV antenna socket outlet. DSR-2025 (EM)-1.24.7 |
| 168 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. DSR-2025 (EM)-1.24 |
| 169 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. DSR-2025 (EM)-1.26 |
| 170 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm). DSR-2025 (EM)-1.27.1 |
| 171 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. DSR-2025 (EM)-1.31 |
| 172 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. DSR-2025 (EM)-1.32 |
| 173 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. As required. DSR-2025 (EM)-1.33 |
| 174 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. DSR-2025 (EM)-1.38 |
| 175 | Supplying and fixing PVC batten/ angle holder including connections etc. as required. DSR-2025 (EM)-1.58 |
| 176 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as equired. Group B. DSR-2025 (EM)-1.55.2 |
| 177 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). DSR-2025 (EM)-1.56 |
| 178 | Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \\"C\\" curve including connections, painting etc. as required. DSR-2025 (EM)-1.57 |
| 179 | Supplying,installation,testing and commissioningof Passive Infrared(PIR) technology based occupancy sensor having high preformance, non regulating programmable type, suitable for connected load upto 10Amp , for mounting height up to 3 mtr and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required. DSR-2025 (EM)-7.1 |
| 180 | Supply and fixing of max. 18-22 Watt LED Batten fitting with Extruded Aluminum housing, special polycarbonate diffuser for glare free light distribution and suitable mounting for on both surface & suspended, complete in all respect. 2160-2640 system lumens, >120 Lm/W, PF>0.95, THD <10%, CRI>80, >300V over voltage protection, 2.5 KV internal Surge Protection, with 3 year warrantee. CATT-AAA. UPSOR 23.08 |
| 181 | Supplying, fixing, connecting, testing and commissioning of LED mirror light luminaire with 10W watt complete with electronic ballast, lamp including connection etc. complete as required,Including connection with 1.5 sqmm FRLS PVC insulated copper conductor similar to Philips Cat. No. ULTRON, STYLISH LIVING |
| 182 | Supply & fixing of water tight oblong 10 watt LED Bulkhead luminai having pressure die cast housing with driver set confirming to IP65 and above protection, IK 08, High purity transmisivity UV Stabilized Non yellowish diffuser/ for uniform light distribution, detachable driver set, open and short circuit protection suitable for 24 Hr Continuous Operation, Complete in All respect. 1200 sstem lumens, >120 Lm/W, PF>0.95, CRI>70, >300V over voltage protection, 4 KV internal surge Protection, metal housing with 5 years warrantee. |
| 183 | Supply & Fixing of Step Light IP 44 2 W , total 80 system lumes, PF>0.95, THD<10%, CRI>80, > 300V over voltage protection, dimensions: 108 x 108 x 52 mm having power coated die cast al. housing. |
| 184 | Supply & Fixing of Rope Light in cove, IP 65, 120 l/w, 8 watt/ meter |
| 185 | Supplying, erection, connecting, testing and commissioning of 200 mm 900 rpm exhaust fan complete with gravity louver and connection with 3 core flexible wire as required. |
| 186 | Supplying, erection, connecting, testing and commissioning of 300 mm 900 rpm exhaust fan complete with gravity louver and connection with 3 core flexible wire as required. |
| 187 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. DSR-2025 (EM)-19.1 |
| 188 | Providing, supplying, installation, testing and commissioning of LED track mounted spot light, made of die-cast aluminium housing, complete with integrated LED driver, reflector optics with clear glass cover, suitable for mounting on standard single-phase track, including all accessories, wiring from track connector, fixing hardware, and making good the surface, as required. Wattage : 20W. Colour temperature: As specified by Engineer-in-Charge (3000K / 4000K / 5700K). Finish: White / Black. MR |
| 189 | Providing, supplying, installation, testing and commissioning of LED curved linear suspended luminaire made of extruded aluminium profile with powder coated / anodized finish, complete with integrated LED modules, electronic driver, milky diffuser for uniform glare-free illumination, suspension kit with adjustable cables, ceiling fixing accessories, internal wiring, and making good the surface, complete as per approved lighting drawings and as directed by Engineer-in-Charge. Profile size: 100×77 mm (W×H). Wattage: 30W (or as per approved lighting layout). Mounting: Suspended from ceiling. Shape: Curved / custom geometry as per lighting design. MR |
| 190 | Providing, supplying, installation, testing and commissioning of LED linear box type luminaire of width 55 mm, made of extruded aluminium housing with powder coated / anodized finish, complete with high efficacy LED modules, electronic driver, prismatic / PMMA diffuser for uniform light distribution, end caps, suspension kit or surface mounting accessories, internal wiring, fixing hardware, and making good the surface, complete as per specifications and as directed by Engineer-in-Charge. Profile size (W×H): 55 × 73 mm. Length options: 600 mm / 1190 mm / 1780 mm / 2370 mm (linkable for customized length). Wattage options: 10W–72W (as per selected length and lighting design). Mounting: Suspended or Surface mounted. Finish: White / Black / As specified. MR |
| 191 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 8 way , Double door. DSR-2025 (EM)-2.3.2 |
| 192 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 6 way (4 + 18), Double door. DSR-2025 (EM)-2.4.2 |
| 193 | 8 way (4 + 24), Double door. DSR-2025 (EM)-2.4.3 |
| 194 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required). 4 way (4 + 12), Double door. DSR-2025 (EM)-2.5.1 |
| 195 | 8 way (4 + 24), Double door. DSR-2025 (EM)-2.5.2 |
| 196 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole. DSR-2025 (EM)-2.10.1 |
| 197 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. DSR-2025 (EM)-2.11 |
| 198 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 Amp. DSR-2025 (EM)-2.12.1 |
| 199 | 63 Amp. DSR-2025 (EM)-2.12.2 |
| 200 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A. DSR-2025 (EM)-2.13.1 |
| 201 | 63 A. DSR-2025 (EM)-2.13.2 |
| 202 | 100 A. DSR-2025 (EM)-2.13.3 |
| 203 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 A. DSR-2025 (EM)-2.14.1 |
| 204 | 40 A. DSR-2025 (EM)-2.14.2 |
| 205 | Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A \\"C\\" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. DSR-2025 (EM)-2.20 |
| 206 | Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 300 mm width X 50 mm depth X 1.6 mm thickness. DSR-2025 (EM)-4.1.4 |
| 207 | Supplying and installing following size of perforated painted with powder coating M.S. cable trays bends with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.300 mm width X 50 mm depth X 1.6 mm thickness. DSR-2025 (EM)-4.2.4 |
| 208 | Supplying and installing following size of perforated painted with powder coating M.S. cable trays Tee with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 300 mm width X 50 mm depth X 1.6 mm thickness. DSR-2025 (EM)-4.3.4 |
| 209 | Supplying and installing following size of perforated painted with powder coating M.S. cable trays Cross Member with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 300 mm width X 50 mm depth X 1.6 mm thickness. DSR-2025 (EM)-4.4.4 |
| 210 | Supply of Roof conductor holder for parapet- Polyamide Conductor holder: With M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder.Weather and temperature resistant from -35 to +90 degree Celsius tested. Conductor holder @ 1 meter distance |
| 211 | Polyamide roof cable holder for flat roof: Closed form with bottom. Filling weight 1Kg (frost-resistant concrete). Sleeve from polyethylene, black @ 1 meter distance. |
| 212 | Vertical air terminal with accessories:Providing of Air terminals as per IS-IEC -62305 part-3 Nominal size Ø10/16 mm aluminium rod: 2 Mtr Airterminal: semi-hard ;Suitable for high wind load. |
| 213 | Vertical air terminal with accessories:Providing of Air terminals as per IS-IEC -62305 part-3 Nominal size Ø10/16 mm aluminium rod: 4 Mtr Airterminal: semi-hard ; Suitable for high wind load. |
| 214 | Providing of Stand for Fang Fix system 16 kg made up of frost resistant concrete. |
| 215 | Providing of Stand for Fang Fix system 16 kg with base and clamp ,made up of frost resistant concrete and clamp tested upto 100KA lightning current . |
| 216 | Connector: For T cross and parallel connectors. Quick installation using hexagonal bolt M10X30 high-grade hot dip galvanised. Conforms to the requirements according to DIN VDE 0185-305 (IS-IEC 62305) |
| 217 | Providing of expansion piece with connector: For equalising temperature related length changes. Necessary on conductors length over 20 meters. For round conductor Rd 8/ALU. |
| 218 | Connector: For T cross and parallel connectors. Quick installation using hexagonal bolt M10X30 high-grade hot dip galvanised. Conforms to the requirements according to DIN VDE 0185-305 (IS-IEC 62305)(2nos/expansion piece). |
| 219 | Supply of 8 mm Aluminum Round Conductor complete as specified in drawing & Meets the requirements of VDE 0185-305 (IS/IEC 62305) |
| 220 | Supply of Roof conductor holder for parapet- Polyamide Conductor holder: With M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder.Weather and temperature resistant from -35 to +90 degree Celsius tested. Conductor holder @ 1 meter distance |
| 221 | Supply of Test Joint (Folding Clamp) suitable to connect 8mm round conductor and max by 30x3 mm GI strip as specified in drawing and directed by Engineer |
| 222 | Supply of Galvanised Steel Flat 30X3 mm thickness from earth electrode directly in ground as required. Flat conductor Hot Dipped Galvanized. |
| 223 | Providing of Cross connector for Flat: Suitable for 30mm Galvanised steel strip. Installed with 4 nos of hexagonal plate. |
| 224 | Providing of flat conductor holder suitable for FL 30. Installed with 2 hexagonal bolts. |
| 225 | Providing of Plastic Corrosion Protection strip: Approx 1.1 mm thick. Width 50mm. Made of petrolatum- coated chemical fibre fabric. |
| 226 | Supply of UL Listed & CPRI Tested maintenance free ,Low carbon copper coated earth rod of 3 metre electrode having diameter of 14 mm with copper coating thickness of 250micron tested as per IEC 62561-2 . |
| 227 | Universal clamp made of SS to connect rod with flat conductor |
| 228 | Earth conductivity enhancing compound shall be of 25 kg/pit tested as per IEC 62561-7,TCLP tested. |
| 229 | The above arrangements shall be provided with Heavy duty earth champer of 5000kg load bearing capacity to ensure the safety of earthing system . |
| 230 | Supply, installation, testing and commissioning of Equipotential Bonding Busbar |
| 231 | 6.00 Mt. WIDE C.C. ROAD: Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-incharge. All kinds of soil (DSR-2023-2.6.1) |
| 232 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm. depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth lead upto 50 metres (DSR-2023-16.1) |
| 233 | Providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded Stone aggregate 40 mm nominal size) including supply of all materials, labour T & P rtc required for proper completion of the work and curing complete also including cost of formwork in foundation & floors. (DSR-2023-4.1.8) |
| 234 | Supplying and stacking at site: 90 mm to 45 mm size stone aggregate. (DSR-2023-16.3.1) |
| 235 | 63 mm to 45 mm size stone aggregate (DSR-2023-16.3.2) |
| 236 | Local Sand @ 25% of Item No. 3a (DSR-2023-2.27) |
| 237 | Stone screening 11.2 mm nominal size (Type B) (DSR-2023-16.3.7) |
| 238 | Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density . (DSR-2023-16.4) |
| 239 | Providing & laying of a separation membrane between the concrete slab & the sub-base of impermeable plastic sheet 125 microns thick laid flat without creases. Overlap of plastic sheet is necessary and should be 300mm. The separation membrane is to be stuck to the lower lvl. with patches of adhesives or concrete nails with washer. (M.R.) |
| 240 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR-2023-4.1.3) |
| 241 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR-2023-6.1.2) |
| 242 | Trimixing on surface (M.R.) |
| 243 | Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements all complete as per direction of the Engineer-in-Charge. Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements all complete as per direction of the Engineer-in-Charge. (DSR-2023- 16.46.1). Using grade 'A' sealing compound. |
| 244 | 4.50 Mt. WIDE C.C. INTERLOCKING: Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-incharge. All kinds of soil (DSR-2023-2.6.1) |
| 245 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm. depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth lead upto 50 metres (DSR-2023-16.1) |
| 246 | Providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded Stone aggregate 40 mm nominal size) including supply of all materials, labour T & P rtc required for proper completion of the work and curing complete also including cost of formwork in foundation & floors. (DSR-2023-4.1.8) |
| 247 | Supplying and stacking at site: 90 mm to 45 mm size stone aggregate. (DSR-2023-16.3.1) |
| 248 | 63 mm to 45 mm size stone aggregate (DSR-2023-16.3.2) |
| 249 | Local Sand @ 25% of Item No. 3a (DSR-2023-2.27) |
| 250 | Stone screening 11.2 mm nominal size (Type B) (DSR-2023-16.3.7) |
| 251 | Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density . (DSR-2023-16.4) |
| 252 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarsesand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (DSR-2023-16.68) |
| 253 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR-2023-6.1.2) |
| 254 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : Pipes, cables etc. exceeding 80 mm dia. But not exceeding 300 mm dia. DSR-2023-2.10.1.2 |
| 255 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. 100 mm diameter. DSR-2023-19.1.1.1 |
| 256 | 150 mm diameter. DSR-2023-19.1.1.2 |
| 257 | 200 mm diameter. DSR-2023-19.1.1.3 |
| 258 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design: 100 mm diameter S.W. pipe. DSR-2023-19.3.1 |
| 259 | 150 mm diameter S.W. pipe. DSR-2023-19.3.2 |
| 260 | 200 mm diameter S.W. pipe. DSR-2023-19.3.3 |
| 261 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design. 150x100 mm size P type. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. DSR-2023-19.4.2.1 |
| 262 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design: Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg). With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. DSR-2023-19.7.1.1 |
| 263 | Extra for depth for manholes : Size 90x80 cm. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. DSR-2023-19.8.1.1 |
| 264 | Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture’s permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. DSR-2023-19.16 |
| 265 | Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) with precast R.C.C. vertical grating complete as per standard desig. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. DSR-2023-19.28.1 |
| 266 | EXTERNAL WATER SUPPLY WORK: Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil. Pipes, cables etc, not exceeding 80 mm dia. DSR-2023-2.10.1.1 |
| 267 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work. 20 mm dia nominal bore. DSR-2023-18.12.2 |
| 268 | 25 mm dia nominal bore. DSR-2023-18.12.3 |
| 269 | 32 mm dia nominal bore. DSR-2023-18.12.4 |
| 270 | 65 mm dia nominal bore. DSR-2023-18.12.7 |
| 271 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete: 25 to 40 mm nominal bore. DSR-2023-18.13.1 |
| 272 | 50 to 80 mm nominal bore. DSR-2023-18.13.2 |
| 273 | Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality: 20 mm diameter pipe. DSR-2023-18.40.2 |
| 274 | 25 mm diameter pipe. DSR-2023-18.40.3 |
| 275 | 32 mm diameter pipe. DSR-2023-18.40.4 |
| 276 | 65 mm diameter pipe. DSR-2023-18.40.7 |
| 277 | Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work: 20 mm diameter pipe. DSR-2023-18.41.2 |
| 278 | 25 mm diameter pipe. DSR-2023-18.41.3 |
| 279 | 32 mm diameter pipe. DSR-2023-18.41.4 |
| 280 | 65 mm diameter pipe. DSR-2023-18.41.7 |
| 281 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end). 25mm dia nominal bore. DSR-2023-18.17.1 |
| 282 | 50mm dia nominal bore. DSR-2023-18.17.4 |
| 283 | Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. DSR-2023-18.33.1 |
| 284 | EXTERNAL DRAIN WORK: Constructing brick masonry surface drain with bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) including earth excavation, 10cm thick bed concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 20 mm nominal size) and 25 mm thick cement concrete 1:2:4 (1 cement 2 coarse sand 4 graded stone aggregate 12.5 mm nominal size) for filling haunches including 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) with a floating coat of neat cement inside the drain, its top and exposed side and 12mm thick external plaster with cement mortar 1:6 (1 cement : 6 coarse sand) including connection to existing drain and disposal of surplus earth. 30 cm drain 45 cm average depth |
| 285 | 30 cm drain 45 cm average depth |
| 286 | RAIN WATER HARVESTING PIT (2): Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. In all kind of soil upto 1.5m depth. DSR-2023-2.6.1 |
| 287 | In all kind of soil upto 1.5m to 3.0m. Depth. DSR-2023-2.6.1 |
| 288 | In all kind of soil upto 3.0m to 4.5m. Depth. DSR-2023-2.6.1 |
| 289 | In all kind of soil upto 4.5 m to 6.0m. Depth. DSR-2023-2.6.1 |
| 290 | Providing and laying in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded Stone aggregate 20 mm nominal size) and curing complete,including cost of form- work,in foundation and floors. DSR-2023-4.1.3 |
| 291 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand). DSR-2023-6.1.1 |
| 292 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources. DSR-2023-5.1.2 |
| 293 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform. DSR-2023-5.9.3 |
| 294 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more. DSR-2023-5.22.6 |
| 295 | 12mm cement plaster on rough side of single or half brick wall mix 1:3 (1 cement : 3 Coarse sand). DSR-2023-13.9.1 |
| 296 | Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design: With 20x20mm square bar. DSR-2023-19.15.1 |
| 297 | Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. M.D. -10- Circular shape 500mm internal diameter. DSR-2023-19.19.2.2 |
| 298 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. Drilling of 300mm dia bore hole manually. DSR-2023-23.2.1.1 |
| 299 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depth`s, as per direction of Engineer-in-charge. 150 mm nominal size dia. DSR-2023-23.4.2 |
| 300 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. DSR-2023-23.5 |
| 301 | Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. DSR-2023-23.6 |
| 302 | Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in r`echarge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge. DSR-2023-23.7 |
| 303 | Gravel packing in tubewell construction in accordance with IS: 4097, including providin`g gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete a`s per direction of Engineer-in-charge. DSR-2023-23.8 |
| 304 | DESILTING CHAMBER: Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. In all kind of soil upt`o 1.5m depth. DSR-2023-2.6.1 |
| 305 | In all kind of soil upto 1.5m to 3.0m. Depth. DSR-2023-2.6.1 |
| 306 | Providing and laying in cement concrete 1:2:4 (1 cement :2 coarse sand:4 grad`ed Stone aggregate 20 mm nominal size) and curing complete,including cost of form- work,in foundation and floors. DSR-2023-4.1.3 |
| 307 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand). DSR-2023-6.1.1 |
| 308 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources. DSR-2023-5.1.2 |
| 309 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform. DSR-2023-5.9.3 |
| 310 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Me`chanically Treated bars of grade Fe-500D or more. DSR-2023-5.22.6 |
| 311 | 12mm cement plaster on rough side of single or half brick wall mix 1:3 (1 cement : 3 Coarse sand). DSR-2023-13.9.1 |
| 312 | Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cemen`t concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design: With 20x20mm square bar. DSR-2023-19.15.1 |
| 313 | Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. M.D. -10- Circular shape 500mm internal diameter. DSR-2023-19.19.2.2 |
| 314 | PIPE & CHAMBER: Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each` deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil. Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm. DSR-2023-2.10.1.2 |
| 315 | Open timbering in trenches including shuttering and shoring complete. (Measurement to be taken of the face area timbered). Depth not exceeding 1.5 meter. DSR-2023-2.20.1 |
| 316 | Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design. 150 mm. dia. RCC Pipes. DSR-2023-19.3.2 |
| 317 | 250 mm. dia. RCC Pipes. DSR-2023-19.3.4 |
| 318 | 300 mm. dia. RCC Pipes. DSR-2023-19.3.5 |
| 319 | Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete. 150 mm. dia. RCC Pipes. DSR-2023-19.6.2 |
| 320 | 250 mm. dia. RCC Pipes. DSR-2023-19.6.3 |
| 321 | 300 mm. dia. RCC Pipes. DSR-2023-19.6.4 |
| 322 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. DSR-2023-19.7.1.1 |
| 323 | Providing orange colour safety foot rests of minimum 6 mm thick plastic encapsulated as per IS:10910 on 12 mm dia steel bar conforming to IS:1786 having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm thread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. DSR-2023-19.16 |
| 324 | EXTERNAL DRAIN (300X450). Earth work in excavation. DSR-2023-2.6.1 |
| 325 | P.C.C. 1:4:8. DSR-2023-4.1.8 |
| 326 | B/W in 1:4 Cement Coarse Sand. DSR-2023-6.1.1 |
| 327 | R.C.C. work. DSR-2023-5.1.2 |
| 328 | Centering & shuttering. DSR-2023-5.9.3 |
| 329 | M.S. work in R.C.C. DSR-2023-5.22.6 |
| 330 | 12 MM thick plaster (1:3) coarse sand. DSR-2023-13.7.1 |
| 331 | EXTERNAL DRAIN (450X600). Earth work in excavation. DSR-2023-2.6.1 |
| 332 | P.C.C. 1:4:8. DSR-2023-4.1.8 |
| 333 | B/W in 1:4 Cement Coarse Sand. DSR-2023-6.1.1 |
| 334 | R.C.C. work. DSR-2023-5.1.2 |
| 335 | Centering & shuttering. DSR-2023-5.9.3 |
| 336 | M.S. work in R.C.C. DSR-2023-5.22.6 |
| 337 | 12 MM thick plaster (1:3) coarse sand. DSR-2023-13.7.1 |
| 338 | SEPTIC TANK & SOAK PIT-1 (Size :- Length = 5.00 M. Width = 2.00M Total Depth =3.00M) Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width aswell as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5 m, as directed by Engineer-incharge. In all kind of soil upto 1.5m depth. DSR-2023-2.6.1 |
| 339 | In all kind of soil upto 1.5m to 3.0m. Depth. DSR-2023-2.6.1 |
| 340 | In all kind of soil upto 3.0m to 4.5m. Depth. DSR-2023-2.6.1 |
| 341 | Providing and laying of cement concrete in base excluding the cost of centring and shuttering by 1:2:4 (1 cement : 2 coarse sand : 4 gradded stone aggregae 40mm nominal size). DSR-2023-4.1.3 |
| 342 | Brick work with brick of class designation 150 in foundation and plinth in cement mortar (1 cement : 4 coarse sand). DSR-2023-6.1.1 |
| 343 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). DSR-2023-5.1.2 |
| 344 | Suspended floors, roofs, landings, balconies and access platform. DSR-2023-5.9.3 |
| 345 | P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. DSR-2023-5.22.1 |
| 346 | 12mm cement plaster on rough side of mix 1:3 (1 cement : 3 coarse sand). DSR-2023-13.7.1 |
| 347 | Providing M.S. foot rest including fixing with 20x20x10 cm. cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 gradded aggregate of nominal size 20mm ) as per standard design with 20x20mm sq bars. DSR-2023-19.15.1 |
| 348 | Providing and fixing C.I. tee at the inlet and outlet of septic tank.DSR-2023-7087 |
| 349 | Providing & fixing 75mm dia vent pipes. DSR-2023-17.35.2.1 |
| 350 | Providing & fixing of 75mm dia cast iron terminal guard. DSR-2023-17.56.2.1 |
| 351 | Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. M.D. -10- Circular shape 500mm internal diameter. DSR-2023-19.19.2.2 |
| 352 | M.D. -2.5- Circular shape 450mm internal diameter. DSR-2023-19.19.1.3 |
| 353 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standard design. With F.P.S. bricks. DSR-2023-19.32.1 |
| 354 | CONSTRUCTION OF TUBEWELL: Transportation Charges of drilling equipment including assembly and other material as required. |
| 355 | Drilling of 675 mm. dia by rotary machine |
| 356 | Supply & laying of 350 mm. dia housing pipe (8 mm. thick) |
| 357 | Supply & laying of 200 mm. dia blind pipe (8 mm. thick) |
| 358 | Supply & laying of 200 mm. dia slotted pipe (8 mm. thick) |
| 359 | COST OF BORING (Depth-120 m, Dia-675 mm) & SUBMERSIBLE PUMP (860 LPM) |
| 360 | Supply & fixing of 200 mm. dia Socket |
| 361 | Supply & fixing of 200 mm. dia Bail plug |
| 362 | Supply & fixing of 350 mm. dia well cap |
| 363 | Supply & fixing of 350x200 mm. dia reducer. |
| 364 | Supply & fixing of 350 mm. dia housing clamp |
| 365 | Supply & Filling of pee gravel 2 mm. 4 mm. in side of bore after lower and development as required as per direction of E/I. |
| 366 | Development by air compressor including Transportation. |
| 367 | Development by O.P. Unit including Transportation. |
| 368 | Supply of submersible pump suitable for tube well capable of pumping clear and cold water free from chemical and directly coupled with electric moter operating of 415 volt suitable for 3 phase 50 cycle A.C. Supply of following duty condition: A - Discharge of water in LPM 860 Approx size of discharge outlet in 80 mm. B - Total Head of pump set 45 m. |
| 369 | Supply and fixing of finolex or equivalent ISI marked submersible copper cable of size 2x3x2.5 sq. mm. |
| 370 | Supply of control panel cubical type wall mounted vermin proof with internal wiring duly enameled painted and mechanically finished having L&T of qul. Male switch fuse unit with HRC fuses, Ameter, Boltmeter, Selector switch, phase indicating lamp with bulbs, instrument fuses, power capcitor single phase preventor etc. complete set with supply of Jyoti or eq. Air break Star- Delta motro starter suitable for above submersible pump set. |
| 371 | Supply of 80mm dia M.S. column pipe of class 'C' both and socketed with heavy sockets in 3/6 meter length and one end flanged complete with interlocking arrangements. |
| 372 | Supply of 80mm dia M.S. column pipe clamps with nut, bolts, packing etc. |
| 373 | Supply of 80mm dia C.I. double flanged ISI mark reflex valve of updadhya or equ. Make. |
| 374 | Supply of 80mm dia C.I. double flanged ISI mark sluice valve with hand wheel of upadhya or equ. Make. |
| 375 | Supply of C.I. double flanged bend of 80mm dia i/c cost of material and labour. |
| 376 | Supply of 80mm dia C.I. tee heavy quality i/c cost of material. |
| 377 | Supply of Guru/Fibing or equivalent make pressure gauge. |
| 378 | Erection & commissioning of pumping plants complete along with electric wiring. |
| 379 | Supply of steel wire rope of 1/2\\" size |
| 380 | S/B of 600mm x 600 mm x 6.0 mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead on one no. 8 to 10 SWG GI wite in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. , pipe and G.I. wire will be extra) 30 cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal. coke and salt at least 150mm thick alround etc. as per directions of E/I complete in all respects as per drawing. |
| 381 | S/F of one number 8 to 6 SWG G.I. wire in 15mm dia G.I. Pipe for earthing, laid in ground or in wall duly concealed includingn the cost of cement, sand labour. T&P other material required for proper completion of the work as directed at site. |
| 382 | S/F of aluminium conductor PVC insulated armoured, served, sheathed cable 1100 volts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by E/I complete in all respects The armoring of the cable shall be properly connected with the earth conductor by clamps etc. 16 sqmm x 4 core |
| 383 | External Electrical SITC of H.T. VCB (11KV) 11 KV HT VCB FOUR BREAKER PANEL BOARD (INDOOR TYPE) (1 INCOMMING). Design, manufacturing, testing at works, supply of HT Panel as per specification and comprising of the following :- INCOMER: a) Incomming - 1 No, 630 Amp, VCB. b) 1 No.- 11 KV / 110 Volt PT class 0.5 accuracy and 100 VA burden with 1 No. voltmeter (0-12 KV), digital type, selector switch for voltmeter and protection MCB for HT Metering up to 12 KV on incommer. c) 1 No.- (0 - 120 A) dual scale Ammeter, digital type, selector switch for ammeters. d) 1 No - Microprocessor based numericak relay with O/C, E/F and S/C protection. e) 1 No - set of dual core dual ratio 3 CTs 100/5A of 15 VA burden and accuracy class 0.5 for metering and class 5P10 for protection. f) 1 No. electronic type digital energy analyser having 30 days memory and parameters of KW, KWH, Power factor, frequency etc. Suitable for BMS compatible with all accessories. g) 1 No. hooter with hooter acceptance and reset push button. h) 1 No - Red, Yellow & Blue for phase indication. i) 1 No - Amber for Trip indication. j) 1 No - Red `ON' Green `OFF'indication. k) 1 No - Spring charge indication. l) 1 No - Auto trip indication. m) 1 No. hooter with hooter acceptance and reset push button. n) 1 No. master trip relay. (Electromechanical Type). o) 1 No.Trip ckt supervision relay. (Electromechanical Type). HT Panel switchboard complete with all interconnections, labels, wiring etc, complete as described above in item nos.A and B and as per specifications. |
| 384 | Supply and laying of 3 core standered aluminium conduktor XLPE (Cross linked polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098(Part-II with latest amendments) 11 KV grade at a depht of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks in sides and on the top put across. The armouring of cable shall be properly connected with earth condutor by clamps etc. 300 sq. mm 3 Core |
| 385 | Supply and making indoor cable end jointing with cast resin compound, including lugs and other jointing materials, for 3 core 300 Sq.mm. XLPE aluminium conductor cable of 11 kV grage as required. DSR-2025 (EM)-10.1.4 |
| 386 | Supply and making outdoor cable end jointing with cast resin compound, including lugs and other jointing materials, for 3 core 300 Sq.mm. XLPE aluminium conductor cable of 11 kV grage as required. DSR-2025 (EM)-10.2.4 |
| 387 | Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing. |
| 388 | Suplly and burring of safe Earthing Electrode T-39 Cu Copper Coated, Length 2000mm, outer pipe 76.3mm X 3.2 inner pipe 42.4mm X 2.6mm, terminal Dia 12mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50kgs activated soil (BFC) capable of reucing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame withhinged cover & mansonry housing.(From electrode terminal to switch board, cost of 25x3 copper strip will be extra) Make: As approved in U.P.P.W.D & C.P.R.I. all respects. |
| 389 | Supply and laying of 50mm x 6mm G.I. strip from earth electrode directly in the ground as required complete in all respects. |
| 390 | Supply and Laying of 50mm X 6 mm Copper strip from earth electrode directly in the ground as required complete in all respects. |
| 391 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. DSR-2025 (EM)-5.15 |
| 392 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. DSR-2025 (EM)-5.16 |
| 393 | Providing and fixing MV danger notice plate of 200 mm x 150 mm made of mild steel at least 2mm thick & vitreous enamelled white on both sides and with inscription in signal red colour on front side as required. |
| 394 | Providing and fixing HT danger notice plate 250 mm x 200 mm made of mild steel at least 2mm thick & vitreous enamelled white on both sides and with inscription in signal red colour on front side as required. |
| 395 | Supply and fixing danger board fabricated from 10 gauge MS sheet as per IE Rules |
| 396 | Providing & fixing in position 1000 mm wide, Electrical Insulating Mats, 2mm thick, suitable upto 1.1 KV grade including cutting to required length complete as required per specifications or upto the satisfaction of engineer-in-charge. |
| 397 | Supplying and Laying of Rubber mat 1000 mm. Wide to withstand 11 KV dielectric strength as per latest IS 15652-2006 etc. as reqd. |
| 398 | Supply of Tool & First Aid Box with all necessary tools for maintenance of electrical installation & First aid. |
| 399 | Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130 mm and base plate 12 mm thik) having 3mm thikness with Single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P complete in all respect. |
| 400 | Supply and fixing of LED street light fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 watt. Confirming to IP 66 and above protection complete in all respect. |
| 401 | Supply and fixing of 20 Amp DP MCB (10KA) (C curve) for poles |
| 402 | Supply and fixing of Bakelite sheet 3 mm thick of suitable size & connector |
| 403 | Supplying following 1.1kV grade, heavy duty XLPE insulated, FRLS type armoured /Unarmured cables suitable for 415V, 50Hz, AC system, with inner and outer PVC sheath, outer sheath provided with FRLS insulation, galvanised steel armouring (round or flat as mentioned) and with all components as mentioned in BOQ, specifications and schedule, complete as required.3.5C x 300 sqmm aluminium conductor, A2XWY. |
| 404 | 3.5C x 240 sqmm aluminium conductor, A2XWY. |
| 405 | 3.5C x 150 sqmm aluminium conductor, A2XWY. |
| 406 | 3.5C x 120 sqmm aluminium conductor, A2XWY. |
| 407 | 3.5C x 95 sqmm aluminium conductor, A2XWY. |
| 408 | 3.5C x 70 sqmm aluminium conductor, A2XWY. |
| 409 | 3.5C x 50 sqmm aluminium conductor, A2XWY. |
| 410 | 3.5C x 35 sqmm aluminium conductor, A2XWY. |
| 411 | 3.5C x 25 sqmm aluminium conductor, A2XWY. |
| 412 | 4C x 16 sqmm aluminium conductor, 2XWY. |
| 413 | 4C x 10 sqmm aluminium conductor, 2XWY. |
| 414 | 2C x 16 sqmm aluminium conductor, 2XWY. |
| 415 | 2C x 10 sqmm aluminium conductor, A2XWY. |
| 416 | 2C x 6 sqmm aluminium conductor, A2XWY. |
| 417 | Supplying following 1.1kV grade, XLPE insulated, FRLS type control cables,suitable for 415V, 50Hz, AC system, with inner and outer PVC sheath, outer sheath provided with FRLS insulation and with all components as mentioned in BOQ, specifications and schedule, complete as required. 2C X 2.5 sqmm copper conductor |
| 418 | 4C X 2.5 sqmm copper conductor |
| 419 | 6C X 2.5 sqmm copper conductor |
| 420 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. Upto 35 sq. mm (clamped with 1mm thick saddle). DSR-2025(EM)-7.8.1 |
| 421 | Above 35 sq. mm and upto 95 sq. mm (clamped with 1mm thick saddle). DSR-2025(EM)-7.8.2 |
| 422 | Above 95 sq. mm and upto 185 sq. mm (clamped with 1mm thick saddle). DSR-2025(EM)-7.8.3 |
| 423 | Above 185 sq. mm and upto 400 sq. mm (clamped with 1mm thick saddle). DSR-2025(EM)-7.8.4 |
| 424 | Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 3½ X 300 sq. mm (70 mm). DSR-2025(EM)-9.1.30 |
| 425 | 3½ X 240 sq. mm (62mm). DSR-2025(EM)-9.1.29 |
| 426 | 3½ X 185 sq. mm (57mm). DSR-2025(EM)-9.1.27 |
| 427 | 3½ X 150 sq. mm (50 mm). DSR-2025(EM)-9.1.26 |
| 428 | 3½ X 120 sq. mm (50 mm). DSR-2025(EM)-9.1.25 |
| 429 | 3½ X 95 sq. mm (45 mm). DSR-2025(EM)-9.1.24 |
| 430 | 3½ X 70 sq. mm (38mm). DSR-2025(EM)-9.1.23 |
| 431 | 3½ X 50 sq. mm (32mm). DSR-2025(EM)-9.1.22 |
| 432 | 3½ X 35 sq. mm (32mm). DSR-2025(EM)-9.1.20 |
| 433 | 3½ X 25 sq. mm (28mm). DSR-2025(EM)-9.1.21 |
| 434 | 4 X 16 sq. mm (28mm). DSR-2025(EM)-9.1.33 |
| 435 | 4 X 10 sq. mm (25mm). DSR-2025(EM)-9.1.32 |
| 436 | 2 X 16 sq. mm (22mm). DSR-2025(EM)-9.1.3 |
| 437 | 2 X 10 sq. mm (19mm). DSR-2025(EM)-9.1.2 |
| 438 | 2 X 6 sq. mm (19mm). DSR-2025(EM)-9.1.1 |
| 439 | 2C X 2.5 sqmm copper conductor (19mm) |
| 440 | 4C X 2.5 sqmm copper conductor (19mm) |
| 441 | 6C X 2.5 sqmm copper conductor (19mm) |
| 442 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 90 mm dia (OD-90 mm & ID-76 mm nominal).DSR EM-2022- 14.16.2 |
| 443 | 120 mm dia (OD-120 mm & ID-103 mm nominal). DSR EM-2022- 14.16.3 |
| 444 | 160 mm dia (OD-200 mm & ID-175 mm nominal). DSR EM-2022- 14.16.4 |
| 445 | 200 mm dia (OD-200 mm & ID-175 mm nominal). DSR EM-2022- 14.16.5 |
| 446 | Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. 100 mm dia. DSR EM-2022- 14.14.1 |
| 447 | 150 mm dia.DSR EM-2022- 14.14.2 |
| 448 | 250 mm dia. DSR EM-2022- 14.14.3 |
| 449 | 300 mm dia. DSR EM-2022- 14.14.4 |
| 450 | Making of following size of Cable Chamber made of 230 mm thick brick work in cement mortar (1 cement : 6 sand) with PCC 100 mm thick PCC base plastering of inner and outer surface with cement mortar including providing of Heavy Duty C.I Cover complete with digging, refilling and removal of surplus soil complete as required. 900 mm x 800 mm x 1000 mm deep |
| 451 | 600 mm x 600 mm x 800 mm deep |
| 452 | SITC OF MAIN PANEL FEEDER PILLAR: Design, Supply, installation, testing and commissioning of indoor/outdoor floor mounted/ wall mounted, IP43/IP65, IEC 61439/IS 8623, factory built, modular, sectionalised, compartmentalized, extendable type HT/LT cubicle panel of suitable size suitable for operation on 33/11/0.433/0.415 kV, 50 Hz AC 3 phase supply system fabricated from CRCA sheet steel of 2mm thick for frame work and covers, 3mm thick for gland plates with stiffeners wherever required, having vibration free structure chemically treated with seven tank process or better before painting for surface treatment and powder coated in approved shade, with suitable electrolytic grade high conductivity bus bars extensible, DMC/ SMC (whichever is superior) bus bar supports, with short circuit withstand capacity as mentioned ,bottom base channel of section not less than 100mmX 50mmX 5 mm thick, fabrication shall be done in transportable sections, entire panel shall have a common earth bar of required size at the rear with 2 Nos. earth stud, connections and interconnection with solid conductor wires / copper strips, neutral links, control wiring with 1.5 sqmm. & 2.5sqmm. PVC insulated FRLS copper conductor S/C cable for voltage & current respectively, including providing and fixing following switch gears as per SLD, technical specifications etc.complete in all respect so as to fulfill all as required. LT Panel. The minimum clearances between bus bars shall be as follows : Phase to phase - minimum 20mm, Phase to neutral-minimum 15mm. Incoming : 2Nos 1000 Amp. 4P ACB of 50kA EDO Breaking capacity. Metering : 2 Set of CT's one of 1000/ 5Amp ratio for Multifunction Meter, 1 Set of CT's one of 1000/ 5Amp ratio for AFCR Relay, 2 Set of CT's one of 1000/ 5Amp ratio for 50,50N,51,51N Relay, 2 Nos. Set of Phase Indication Lamp. 2 Nos. of class-III Type SPD. Bus Bar : 1500 Amp.TPN aluminimum bus bar of suitable length.36KA. Outgoing : Phase indication lamps on each outgoing to be provided. 05 No. 400 Amp 4P MCCB. (36 KA). 01 No. 100 Amp 4P MCCB. (25 KA). 05 No. 63 Amp 4P MCCB. (25 KA). Panel described as above. |
| 453 | SITC APFC Panel of 180 KVAR capacity suitable for operation on 415 + 5% Volt, 3 Phase, 50Hz, AC supply, having MPP type, resin bounded, static 10,15,25 KVAR capacitors (without oil) in tier formation complete with following TPN MCCB as incomer of the panel, 7 step microprocessor based power factor controller relay capable to select the rating from 1 KVAR to multiples thereon up to max rating of the panel, current limiting contactors for each capacitors protected with MCBs, Ammeter (Analogue type) with CTs, Voltmeter (Analogue type) selector switches indicating lights, cooling fans for panel, earthing the panel with 2 Nos. 25mm x 5mm thick GI steel flat from existing earth bar, connection of APFC panel with suitable size 3.5 core aluminium conductor armoured XLPE cable from main LT panel (maximum length of cable 10 mtrs.) and compression glands etc. as reqd. The panel should have provision of timer based circuit in APFC relay to switch ON and OFF the static part automatically as and when requried. Capacity of Static capacitors should be accommodated from the overall rating of the panel and should be designed to switch in independently. The panel should be manufactured with 1.6mm thick CRCA sheet duly powder coated. Incoming: One (1) No 250 Amp. 3P MCCB of 36 KA Breaking capacity, 1 Set of CT's one of 250/ 5Amp ratio for Multifunction Meter, 1 Set of CT's one of 250/ 5Amp ratio 55, 1 Nos. Set of Phase Indication Lamp. BUS BAR: 1 Set of 300 Amps TP Aluminium Bus Bars. OUT GOING: 04 No. 63 Amps. TP MCCB (25 KA), 04 No. 40 Amps. TP MCCB (25 KA), 02 No. 25 Amps. TP MCCB (25 KA), 04 No. 25 KVAR Capacitor Bank, 04 No. 15 KVAR Capacitor Bank, 02 No. 10 KVAR Capacitor Bank, 04 No. 25 KVAR 7% Duty Reactor, 04 No. 15 KVAR 7% Duty Reactor, 02 No. 10 KVAR 7% Duty Reactor, 04 No. 25 KVAR TSM, 04 No. 15 KVAR TSM, 02 No. 10 KVAR TSM, Panel described as above |
| 454 | SFP Outdoor Type(IP 65) -1/2 - Incoming : 1 Nos. 40 Amp. 4P MCCB of 25KA Breaking capacity, Metering : Multifunction Meter, One (1) Set of Phase Indication Lamp. Bus Bar : One (1) No. 100 Amp.TPN aluminimum bus bar of suitable length. Outgoing : Phase indication lamps on each outgoing to be provided. 6 No.20 Amp DP MCB. (10 KA), 4 Nos. 1 Phase Timer, Panel described as above |
| 455 | SFP Outdoor Type(IP 65) 3- Incoming : 1 Nos. 40 Amp. 4P MCCB of 25KA Breaking capacity, 1 Nos. 3 Phase Timer, Metering : Multifunction Meter, One (1) Set of Phase Indication Lamp. Bus Bar : One (1) No. 100 Amp.TPN aluminimum bus bar of suitable length. Outgoing : Phase indication lamps on each outgoing to be provided., 8 No.20 Amp DP MCB. (10 KA), 7 Nos. 1 Phase Timer. Panel described as above |
| 456 | SITC 630 KVA RADIATOR COOLED D.G. SET IN ACOUSTIC ENCLOSURE WITH AMF OR Equivalent & Exhaust System with complete Accessories. Providing, installation testing & commissioning of 'Silent Type' Diesel Generating Set along with having prime power rating 630 KVA, 415 Volts at 1500RPM, 0.8 lagging Factor at 415 V suitable for 50 Hz, 3 phase system and for 0.85 load factor and consisting of the following:- Diesel Engine: Diesel Engine 4 stroke radiator cooled, electric start, of suitable bhp (CPCB-2 Compliance) having Six cylinders at 1500 RPM suitable for above output of alternator , 50% RH & at 1000 metre MSL and confirming to BS 5514, BS 649, is 10000, capable of taking 10% overloading for one hour after 12 hours of continuous operation. The engine will be fitted complete with all the required accessories. The DG Set Controller shall be supplied by the same vendor of DG Set OEM. Engine Mounted Instrument Panel fitted with and having digital display for following: Start- stop switch with key. Water Temperature indication, Lubrication Oil pressure indication, Battery charging indication, RPM indication, Over Speed trip Indication, Low lubrication oil Pressure trip indication, Engine Hours Indication. Alternator: Synchronous alternator rated at 630 KVA, 415 Volts at 1500 RPM, 3 phase 50 Hz, AC Supply with 0.8 lagging power factor , 50% RH . The alternator shall be having SPDB enclosure, brushless, continuous duty, self-excited and self-regulated through AVR confirming to IS:4722/ BS 2613 suitable for tropical conditions and with class- H insulation. Alternator shall have end termination cable box on alternator to terminate the 800A Bus Duct. Base Frame & Foundation: Both the engine and alternator shall be mounted on suitable base frame made of MS channel with necessary reinforcement which shall be installed on suitable cement concrete foundation and vibration isolation arrangement as per recommendations of manufacturer. Fuel Tank: Daily service fuel tank of 990 litres capacity, fabricated out of 3mm thick M.S. sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS class 'C pipes of suitable dia. Complete with valves level indication & accessories as required as per specifications. Exhaust System : Dry exhaust mainfold with hospital grade exhaust silencer / Catalytic Convertor. Starting System: 24V DC starting system comprising of starter motors: voltage regulator and arrangement for initial excitation complete with 2 Nos. of batteries (25 plates, 160 AH lead Acid type) as required as per specifications. Accoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air into the atmosphere as per specifications. The Acoustic Enclosure shall be factory fitted by the OEM. Note:Foundation work for DG SETs is not included in Electrical works it will come on Civil work. |
| 457 | TRANSFORMER: SITC of 630KVA 11KV/433V Dyn11 Copper Wound Oil Type Transformer with OCTC +5% to -10% in steps of 2.5% , Class of Insulation: A, Temperature rise limits of 40 deg.C over ambient of 50 degrees. Losses (As per IS tolerances) and all accessories and confirming to As per IS 1180 Level 1 & Testing parameter as per IS 2026 complete with all fittings and accessories as per specifications attached etc as required at site.Note:Foundation work for transformer is not included in Electrical works it will come on Civil work. |
| 458 | CATTLE TRAP ( 6.00 x 1.48 M SIZE ): Earth work in excavation in trenches or drains(not exceeding 1.5m in width or 10 sqm on plan) including dressing of side sand ramming of bottoms, lift upto 1.5 m,including getting out the excavated soil and disposal of surplus excavated soil as directed,with in alead of 50 m. All kinds of soils. |
| 459 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-All work upto plinth level. (a) 1:4:8( 1 cement : 4 course sand: 8 graded stone aggregate 40 mm nominal size ) |
| 460 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-All work upto plinth level. (a) 1:2:4 (1 cement : 2 course sand : 4 graded stone aggregate 20 mm nominal size ) |
| 461 | Providing and fixing T-iron frames for doors,windows and ventilators of mild steel Tee-sections,joints mitered and welded with 15*3mm lugs 10 cm long embededded in cement concrete blocks 15*10*10 cm of 1:3:6 ( 1 cement : 3 course sand :6 graded stone aggregate 20 mm nominal size ) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary but hinges and screws and applying a priming coat of approved steel primer. |
| 462 | G.I. Pipe (80 MM DIA) (DSR-18.12.8) |
| 463 | D.G. SET PLATFORM: Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil. DSR-2023-2.8.1 |
| 464 | Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. DSR-2023-2.25 |
| 465 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). DSR-2023-4.1.8 |
| 466 | Reinforced cement concrete work in beams, suspended floors, roofshaving slope up to 15° landings, balconies, shelves, chajjas, lintels, bands,plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).DSR-2023-5.3 |
| 467 | Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in anover all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. DSR-2023-5.22.6 |
| 468 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand). DSR-2023-6.1.2 |
| 469 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. DSR-2023-2.25a |
| 470 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. DSR-2023-2.27 |
| 471 | 15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand). DSR-2023-13.5.1 |
| 472 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. DSR-2023-11.3.1 |
| 473 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick. PWD - 5.9.21 |
| 474 | CURIOSITY COURTYARD (Civil Work): Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming ofbottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 All kinds of soil.DSR-2023-2.8.1 |
| 475 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. DSR-2023-2.25 |
| 476 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). DSR-2023-4.1.10 |
| 477 | Reinforced cement concrete work in foundations, footings, bases of columns, etc. up to floor five level, excluding the cost of centering and shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). DSR-2023-5.1.2 |
| 478 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the Engineer-in-charge. DSR-2023-5.33.2.1 |
| 479 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level : Thermo-Mechanically Treated bars of grade Fe-500D or more. DSR-2023-5.22.6 |
| 480 | Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete. DSR-2023-5.9.1 |
| 481 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. DSR-2023-16.91.1 |
| 482 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete (Used for Anchor Bolt Fabrication). DSR-2023-10.2 |
| 483 | Polyethylene-Aluminium-Polyethylene composite pressure pipes, UV stabilized with carbon black, capable of withstanding temperatures up to 80°C. DSR-2023-18.3.6 |
| 484 | EPDM Safety Surfacing: Providing and laying dual-layer safety surfacing consisting of a 35mm base layer of recycled SBR granules and a 15mm top layer of UV-resistant EPDM granules, mixed with polyurethane binder. |
| 485 | DINOSAUR WORLD (Civil Work): Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming ofbottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 All kinds of soil.DSR-2023-2.8.1 |
| 486 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). DSR-2023-4.1.10 |
| 487 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement... DSR-2023-5.1.2 |
| 488 | Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete. DSR-2023-5.9.1 |
| 489 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level : Thermo-Mechanically Treated bars of grade Fe-500D or more. DSR-2023-5.22.6 |
| 490 | providing, driving with hydraulic piling rigs with power units, and installing driven cast-in-situ reinforced cement concrete piles of grade M-25. The work includes the cost of the shoe and the length of the pile embedded in the pile cap, but excludes the cost of steel reinforcement. DSR-2023-20.1.1 |
| 491 | Stone work (machine cut edges) for wall lining etc. (veneer work) backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing by means of cramps and pins which shall be paid for separately) : DSR-2023-8.14.3.5 |
| 492 | Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. DSR-2023-22.22A |
| 493 | High Tensile Anchor Sets (M24 to M36 Grade 8.8 HDG) including rigid template-setting for dynamic loads. |
| 494 | Non-shrink High Strength Grout (50 MPa min.) for base plates and anchor pockets |
| 495 | Anti-vandal Flush Access Hatch for service niches, including rubber gasket seal and tamper-proof screws. |
| 496 | VRF Type Airconditioning work: Supply , Installtion testing & commissioning of modular typr VRF Outdoor units equipped with highly efficient scroll compressor with all variable speed inverter scrool compressor, the outdoor should have multiple compressor above 16HP . 100% inverter compressor, special heat exchanger, low noise condenser fan and should work in both heating & cooling mode.considering 100% capacity at 43 eg c and operating range -10 deg c to 56 deg c non stop cooling. the outdoor shouls have minium 32 ltr accumulator to allow the system to perform seamlessly in low load conditions. the deragtion of the machine shouls be considered accordingly, and working /non stop cooling should be upto 56 degree c ambient. the cop of the machine should be atleast 4.0 at AHRI conditions, in order to reduce power consumption. the outdoor should operate at widerange from 320 volts to 460 volts resulting in high uptime even in erratic power conditions. the inverter drive of outdoor should be referigerant coooled to maintain temperature in control and reduce the failure chances. ODU -28 HP |
| 497 | ODU -22 HP |
| 498 | ODU -14 HP |
| 499 | Supply installtion testing Commissioning of inverter VRF INDOOR UNITS for cooling & heating including with wireless remote, multispeed fan , inbult drain pump,synthetic washable plasma filter of suitable capacity and rating complete as required. 1.3 TR |
| 500 | 1.7 TR |
| 501 | 2.0 TR |
| 502 | 2.8 TR |
| 503 | 4.0 TR |
| 504 | Ductable AC: Supply installtion testing Commissioning of inverter floor mounted Ahu type VRF INDOOR UNITS for cooling & heating including with wired remote of suitable capacity and rating complete as required.: 18.0 TR |
| 505 | AHU Kit for 18 .0 TR Unit |
| 506 | Cordless Remote Control |
| 507 | Corded remote Control |
| 508 | Refnet Y joint for IDU |
| 509 | Refnet Y joint for ODU |
| 510 | Variable Refrigerant Volume System: Lifting, shifting, positioning, installation, testing of outdoor units, fittings(Imported Y-joints & header etc.) |
| 511 | Lifting, shifting, positioning, installation, testing of indoor units fittings(Imported Y-joints & header etc.) remote controls of indoor units, complete as per specification and drawings. Nitrogen pressure testing and flushing of the system with working pressure of OEM standard to check leakage and vacuming of the sysytem for better performance and efficiency-Outdoor Unit: 28 HP |
| 512 | Outdoor Unit: 22 HP |
| 513 | Outdoor Unit: 14 HP |
| 514 | Indoor Units: Ductable AC: VRF FLOOR MOUNTED UNIT - 18.0 TR |
| 515 | Cassette AC |
| 516 | AHU KIT - 18.0 TR |
| 517 | Refnet Y joint |
| 518 | Commissioning of VRF systems including charging of R410A gas as per site requirements |
| 519 | Refrigerant Piping: Supply & installtion of Interconnecting refrigerant pipe for VRF hard /soft drawn with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported with GI hanger / tie rod etc.Dia 6.4mm , Insulation 13mm |
| 520 | Dia 9.5mm , Insulation 13mm |
| 521 | Dia 12.7mm , Insulation 13mm |
| 522 | Dia 15.9mm, Insulation 19mm |
| 523 | Dia 19.1mm , Insulation 19mm |
| 524 | Dia 22.2mm , Insulation 19mm |
| 525 | Dia 28.6mm Insulation 19mm |
| 526 | Dia 34.7mm , Insulation 19mm |
| 527 | Dia 41.3mm , Insulation 19mm |
| 528 | Drain Piping: Supply and fixing rigid PVC piping complete with fittings, supports as per specifications and duly insulated with 6 mm thick closed cell nitrile rubber insulation. 25 mm dia |
| 529 | Supply and fixing rigid PVC piping complete with fittings, supports as per specifications and duly insulated with 6 mm thick closed cell nitrile rubber insulation. 32 mm dia |
| 530 | Supply and fixing rigid PVC piping complete with fittings, supports as per specifications and duly insulated with 6 mm thick closed cell nitrile rubber insulation. 40 mm dia |
| 531 | Control & Transmission Wiring: Providing & fixing control cum transmission wiring of 2 core x 0.75 sqmm SHIELDED copper in suitable conduits between indoor and out door unit. |
| 532 | Control & Transmission Wiring for remote wiring: Providing & fixing control cum transmission wiring of 2 core x 0.75 sqmm SHIELDED copper in suitable conduits between indoor and out door unit. |
| 533 | Supply and installation of MS slotted angle for laying of copper pipe , Drain pipe and cable horizontly and vertically along with threadrod , nut washer etc. |
| 534 | Site Fabricated GSS Duct: Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal ducting complete with neoprene rubber gaskets, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. 24 G |
| 535 | Site Fabricated GSS Duct: Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal ducting complete with neoprene rubber gaskets, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.22 G |
| 536 | Acoustic Lining Of Duct: Supply & Installation of acoustic lining of duct with 10 mm thick open cell nitrile with one layer of adhesive inside duct as per complete in all respect. |
| 537 | Thermal Insulation Of Duct: Supply & Installation of thermal insulation over the duct with XLPE sheet for the ducts with 13 mm thick one layer externally on the duct with cold adheshive pesting |
| 538 | Supply & Installation of extruded aluminum powder coated supply air Linear/sqaure Grilles along with control damper |
| 539 | Supply & Installation of extruded aluminum powder coated Return air Linear/Sqaure Grilles with out control damper |
| 540 | Supply & Installation of extruded aluminum powder coated supply air Linear/sqaure diffuser along with control damper |
| 541 | Supply & Installation of extruded aluminum powder coated return air Linear/sqaure diffuser without control damper |
| 542 | Supply & Installation charges for Canvass connection for Ductable Units |
| 543 | ODU Stand: Supply and installation of MS pdu stand for VRF/Ductable outdoor unit as per complete in all respect. |
| 544 | Labour charges for wall chipping work for drain pipe & copper pipe |
| 545 | Labour charges for Wall Opening hole for copper pipe |
| 546 | Core cutting on wall /Beam 3\\"/4\\" |
| 547 | HVAC ODU PANEL: Incoming Comprising of 700 amp TPN MCCB with thermal magnetic release unit along with push button , multifunction meter for V,HZ,A etc. ON/OFF trip indicating light with control mcb set, phase indicating light protected by 2 amp mcb set, bus bar set comprising of 550 amp TPN aluminium bus bar with colour coded hest shinkable sleeves - 1set. Outgoing comprising of 63 amp TPN MCB with thermal magnetic based releases SC & OL protection with starter - 12 set |
| 548 | Supply of Ceiling Suspende Ductable Units: Normal Ductable AC - 11.0 Tr |
| 549 | Supply of Ceiling Suspende Ductable Units : Normal Ductable AC - 8.5 Tr |
| 550 | Ceiling Suspende Ductable Units: Lifting, shifting, positioning, installation, testing of outdoor units, fittings(Imported Y-joints & header etc.) Nitrogen pressure testing and flushing of the system with working pressure of OEM standard to check leakage and vacuming of the sysytem for better performance and efficiency |
| 551 | Indoor / Outdoor Unit: NORMAL DUCTABLE 8.5 TR |
| 552 | Indoor / Outdoor Unit: NORMAL DUCTABLE - 11.0 TR |
| 553 | Commissioning of Ductable systems including charging of R410A gas as per site requirements |
| 554 | Refrigerant Piping: Supply & installtion of Interconnecting refrigerant pipe for VRF hard /soft drawn with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported with GI hanger / tie rod etc. Dia 12.7mm , Insulation 13mm |
| 555 | Refrigerant Piping: Supply & installtion of Interconnecting refrigerant pipe for VRF hard /soft drawn with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported with GI hanger / tie rod etc. Dia 28.6mm Insulation 19mm |
| 556 | Drain Piping: Supply and fixing rigid PVC piping complete with fittings, supports as per specifications and duly insulated with 6 mm thick closed cell nitrile rubber insulation. 25 mm dia |
| 557 | Drain Piping: Supply and fixing rigid PVC piping complete with fittings, supports as per specifications and duly insulated with 6 mm thick closed cell nitrile rubber insulation. 32 mm dia |
| 558 | Control & Transmission Wiring: Providing & fixing control cum transmission wiring of 6 core x 0.75 sqmm SHIELDED copper in suitable between indoor and out door unit. |
| 559 | Supply and installation of MS slotted angle for laying of copper pipe , Drain pipe and cable horizontly and vertically along with threadrod , nut washer etc. |
| 560 | Site Fabricated GSS Duct: Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal ducting complete with neoprene rubber gaskets, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. 24 G |
| 561 | Site Fabricated GSS Duct: Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal ducting complete with neoprene rubber gaskets, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. 22 G |
| 562 | Acoustic Lining Of Duct: Supply & Installation of acoustic lining of duct with 10 mm thick open cell nitrile with one layer of adhesive inside duct as per complete in all respect. |
| 563 | Thermal Insulation Of Duct: Supply & Installation of thermal insulation over the duct with XLPE sheet for the ducts with 13 mm thick one layer externally on the duct with cold adheshive pesting |
| 564 | Supply & Installation of extruded aluminum powder coated supply air Linear/sqaure Grilles along with control damper |
| 565 | Supply & Installation of extruded aluminum powder coated Return air Linear/Sqaure Grilles with out control damper |
| 566 | Supply & Installation of extruded aluminum powder coated supply air Linear/sqaure diffuser along with control damper |
| 567 | Supply & Installation of extruded aluminum powder coated return air Linear/sqaure diffuser without control damper |
| 568 | Supply & Installation charges for Canvass connection for Ductable Units |
| 569 | ODU Stand: Supply and installation of MS pdu stand for VRF/Ductable outdoor unit as per complete in all respect. |
| 570 | Labour charges for Wall Opening hole for copper pipe |
| 571 | HVAC outdoor type panel for ductable units along with bus bar comprising of 100 amp, phase indicating light, SP /OL protection, on /off trip light etc complete as per required. |
| 572 | LIFTS (8 PASSENGER LIFT) CPWD P.A.R. - 3.1.1 |
| 573 | WiFi : Supply & Installation of Airpro Make Controller for 50 Devices |
| 574 | Supply & Installation of Wall Base Wifi 6 Ap |
| 575 | Supply & Installation of Dlink POE Switch With 1 Fiber Port |
| 576 | C.C.T.V. Work: 5MP IR Dome Fixed Camera -1/2.8\\"Progressive Scan CMOS, 1920 × 1080 at 25fps, 2.8 mm Fixed lens, Color: 0.01 Lux at F1.2, 0 Lux with IR, ICR, support H.265, H.264, MJPEG, DWDR, BLC, HLC, 3D Digital Noise Reduction, Three individually configurable stream, Built-in microphone, 12 VDC & PoE, IR range: 40m, IP66, Edge Anlalytics- Line crossing detection, Intrusion detection, Motion detection, Video tampering, EN certified. |
| 577 | Supply and Installation of PTZ Camera |
| 578 | Supply of 32 CH NVR with capacity to record 32 camera at 1080P resolution with 4 Sata ports. With 6 TB HDD |
| 579 | Supply & Installation of Dlink POE Switch With 1 Fiber Port |
| 580 | 24 Port Layer 3 Switch With 10G Port |
| 581 | Supply and Installation of Video Management Workstation with i7 based |
| 582 | Supply and Installation of 40\\" LED 24*7 |
| 583 | Table & Chair |
| 584 | Supply and Installation of 9U Rack |
| 585 | Supply and Installation of 27 U Rack |
| 586 | Supply and Installation of Pole 6 Mtr |
| 587 | Supply and Installation of UPS 10KVA with 15 Mins |
| 588 | Supply & laying of Cat6 Cable |
| 589 | Supply & laying of Conduit |
| 590 | Supply and Installation of Cat6 Single I/O with Face PLATE |
| 591 | Supply and Installation of Cat6 1 Mtr. Patch Cord |
| 592 | Supply and Installation of Cat6 2 Mtr. Patch Cord |
| 593 | Supply and Installation of Cat6 24 Port Patch panel |
| 594 | G-1 COSMOS TO OUR CORE-SCIENCE GALLERY: Providing, supplying, designing, detailed engineering, fabricating, transporting, installing, testing and commissioning (SITC) of Large Interactive Multi-Touch Table exhibit “OUR SOLAR SYSTEM — EXPLORE, TOUCH, DISCOVER” of approx. 2400×1200 mm footprint and ~900 mm height with active touch area 2200×1050 mm, comprising design/shop drawings including IP/thermal strategy and electrical SLD; MS primary frame with anti-corrosive treatment and internal mounting rails; premium external cladding in Corian/HPL/laminate/PU paint finish with visitor-safe rounded corners (R75) and toe-kick recess; edge-to-edge toughened cover glass with safe edge polish and sealing gasket (IP5X intent); bonded PCAP multi-touch system complete with touch controller and calibration; 4K commercial large-format display module with controller/PSU on mounting rails; 4K-ready compute system (mid-range GPU/CPU/RAM/SSD) for real-time playback/interaction; directional under-lip audio including speakers with amplifier/DSP and acoustic grille; filtered active cooling with replaceable filter cassette and fans/blowers for sealed electronics bay; electrical protection & distribution including MCB/RCCB, SPD, PDU and SMPS/PSU; complete power and ELV cabling (FRLS/LSZH power, Cat6/USB/HDMI/DP) with labeled conduits/trunking and segregation; complete earthing and bonding; interactive software/content package (Attract mode + Mission Control, multilingual UI/UX) with perpetual license; including installation, integration, performance testing, thermal soak, endurance trial, touch/display/audio calibration, operator training, O&M manuals and as-built documentation, and 12 months warranty, complete in all respects as per approved drawings and Engineer-in-Charge directions. |
| 595 | Providing, supplying, designing, detailed engineering, fabricating, transporting, installing, integrating, testing and commissioning (SITC) of “PLANETARY EXPLORER TABLE (Physical Models with Augmented Reality Overlay)” comprising design & shop drawings incl. simplified AR calibration procedure; MS primary frame with anti-corrosive treatment; circular tabletop Ø1500 mm with rigid substrate and economy cladding/finish (HPL/laminate + PU) and visitor-safe edges; IP5X-intent base cabinet enclosure with gasketed lockable service door and cam lock; filtered active cooling set with replaceable filter cassette; resin planet models (8–10 nos, assumed 10 nos) with anti-theft inserts/anti-rotation pins and hidden fasteners; simplified rugged anti-theft tablet arms (limited-motion/fixed-angle) with concealed internal cable channel (6 sets @ 60°) complete with docking/charging cradles (6 nos) with concealed protected connectors and tamper-resistant service latch; supply of mid-tier Android tablets (6 nos) with rugged cases; multi-port charging hub(s) (2 sets) with cabling; local controller/mini PC for synchronization and offline operation; network switch/router/AP with accessories; electrical protection and distribution including MCB/RCCB, SPD, PDU and PSUs; complete power & ELV cabling (FRLS/LSZH) and Cat6/USB with conduits/trunking and segregation, labels/terminations; earthing and bonding complete; AR application and economy content pack (standard overlays, bilingual UI, admin/service mode) with perpetual license; complete installation, integration, AR calibration, testing & commissioning, operator training, O&M manuals and as-built documentation, including all hardware/consumables, local transport, handling, protection and finishing, with 12 months comprehensive warranty, complete in all respects as per approved drawings and Engineer-in-Charge directions. |
| 596 | Providing, supplying, fabricating, transporting, installing, testing and commissioning “YOUR WEIGHT ON OTHER WORLDS (Integrated Digital Scale & Vertical Display)” including design & detailed engineering/shop drawings; MS totem structural frame with anti-corrosive treatment; premium fascia cladding/finish in toughened black glass/Corian/HPL including fixings; 55-inch vertical commercial 4K/24×7 signage display with mounting bracket; industrial-grade display PC with OS and I/O; flush floor scale platform 600×600 mm with anti-slip surface, gasket line and anti-tamper fasteners including recess box/frame integration and anti-trip coordination; C3 shear-beam load cell assembly with 4-point support and mechanical overload limiter; ADC/signal conditioning module with wiring harness; microcontroller/PLC I/O interface; LED ring indicator OD 720 mm with diffuser and matched driver/PSU; IP5X-intent gasketed electronics bay with cam-lock service door, filter cassette, fans, rails and cable glands; electrical protection and distribution comprising MCB/RCCB, SPD, PDU and required PSUs; FRLS/LSZH power cabling and segregated ELV/signal cabling in concealed conduits/trunking with all terminations; complete earthing and bonding; interactive software application (planets weight visualization, mass vs weight, jump mode, admin calibration/service mode) with licensing; complete installation, calibration, repeatability and overload checks, endurance run, training to staff, O&M manuals/as-builts, and warranty for 12 months, complete in all respects as per approved drawings and directions of Engineer-in-Charge. |
| 597 | Providing, supplying, designing, detailed engineering, fabricating, transporting, erecting/fixing, installing, testing, calibrating and commissioning of interactive exhibit “Build Your Solar System” (Magnetic/Modular Interactive Wall) comprising (i) design & coordination drawings/system architecture, (ii) rigid MS frame/subframe with wall anchorage and anti-corrosive treatment including concealed supports, (iii) Porcelain Enamel Steel (CeramicSteel) magnetic projection panel 3000×1500 mm with backing substrate, visitor-safe radiused edge trims and concealed fasteners, (iv) UST laser projector (4000+ lumens), (v) adjustable anti-theft projector mounting bracket/plate with safety lanyard provision, (vi) IR depth camera (RealSense class) with micro-adjust mount and FOV alignment hardware, (vii) workstation PC (vision processing + orbital physics simulation + projection mapping) with required interfaces/switch (if used), (viii) magnetic planet pucks with embedded magnets, passive IR fiducials and engraved IDs (8–12 set; as provided), (ix) puck storage/return tray with soft lining (where provided), (x) IP5X-intent dust-sealed AV/PC cabinet with gasketed door, cam lock, cable glands, filter cassette and cooling fans, (xi) electrical protection set MCB/RCCB + SPD + PDU with earthing/bonding, (xii) complete power & ELV cabling (FRLS/LSZH power, HDMI/DP/USB/CAT6) with concealed conduits/trunking, terminations and labeling, (xiii) software package for fiducial recognition, tracking/mapping/calibration tools, orbital physics simulation and UI/attract loop, (xiv) complete installation, alignment and calibration including projector focus/keystone, camera-to-wall calibration, projection mapping verification and dust/thermal checks with 8+ hour endurance trial with logs, and (xv) documentation, operator training, O&M manuals/as-builts, handover spares and 12 months warranty complete in all respects as per approved drawings, specifications and directions of Engineer-in-Charge. |
| 598 | Providing, supplying, designing, detailed engineering, fabricating, transporting, erecting, installing, aligning, testing and commissioning (SITC) of interactive exhibit “LAUNCH A COMET OR ASTEROID” (Pneumatic Launcher & Digital Target Wall) comprising: curved target wall MS frame & ribs (rigid, anti-corrosion) with rear service cavity; high-tension impact-rated projection screen (visible 4000×2400 mm) with full-area damping backing (anti-bounce intent); perimeter screen tensioning frame with 240 mm edge channel, visitor-safe rounded profile and concealed service access cover; perimeter LiDAR curtain sensing system (Hokuyo/SICK equivalent) for impact coordinate detection with LiDAR rails/shrouds, protective covers, concealed cable route, glands and strain relief; laser projector 6000+ lumens mapping-ready with micro-adjust mount bracket and safety tether, including dust-sealed projector hood (IP5X intent); industrial PC/workstation (vision + simulation capable) with impact mapping I/O interface/controller including safe-state relay interlocks, and dust-sealed PC cabinet (IP5X intent) with fan/filter cassette; compressor set with cabinet (if used) including vibration isolation and filtered ventilation; filtered ventilation system (fans + replaceable filter cassettes) for enclosures; launcher console body (MS + premium cladding) with lockable tamper-resistant service door; OEM low-energy museum-certified pneumatic launcher module (proprietary) including foam “comet” projectiles/spares; safety cage/barrier (2600×2200 mm) with 900 mm gate and locks; electrical power & protection with 230V AC interface, MCB/RCCB, SPD and PDU, earthing kit and bonding straps; ELV networking & signal including CAT6/switch and service LAN port; conduits/glands and concealed routing/segregation with cable management; operator controls and safety devices including joystick/buttons, hardwired E-stop, key-enable, door interlock and status indication; software/content for impact processing, curved-surface projection mapping, calibration utilities and response logic; complete on-site installation, alignment, calibration (LiDAR + projection mapping), functional testing with 8+ hour/day trial logs, commissioning, operator training, O&M manuals, as-built documentation and wiring schedules, with comprehensive warranty support for 12 months; complete as per approved drawings, specifications and directions of Engineer-in-Charge. |
| 599 | Providing, supplying, designing, detailed engineering, fabricating, transporting, installing, aligning, testing and commissioning (SITC) of “DYNAMIC EARTH TABLE (Augmented Reality Sand Table)” comprising: MS table frame including leveling feet/base plates and anti-vibration pads (rigid, anti-corrosion); leak-proof sand tray/container with durable liner, clamp strips, rounded visitor-safe rim profile and service clean-out access; premium cladding/finish in HPL/laminate/PU paint with concealed fixings; rigid self-contained overhead MS gantry structure (uprights + cross-member) vibration-controlled; projector of 5000+ lumens mapping-ready; depth camera/sensor (Intel RealSense D435i equivalent) calibrated; workstation PC (RTX GPU capable) industrial; projector/camera mounting plate with fine adjustment slots/brackets and safety tether; dust-sealed projector housing (IP5X intent) with gasketed access, fan and filter cassette; dust-sealed PC cabinet (IP5X intent) with internal rails, gasketed door/cam lock, fan and filter cassette including cable gland plate; filtered ventilation system with fans and replaceable filter cassettes; electrical protection and distribution with 230V AC interface including MCB/RCCB, SPD and PDU with internal wiring segregation and earthing; ELV/data cabling in USB/HDMI/DP/CAT6 with service LAN port and labeling; conduits, glands and concealed cable routing to electronics bay with segregation from power; earthing kit with bonding straps/studs for continuity; initial sand fill (washed/dust-free white silica or equivalent); AR sandbox software (Windows optimized) with custom shaders (perpetual license intent); and complete on-site installation, alignment and calibration (camera-to-projector homography), functional testing with 8+ hour/day trial logs and stability verification, commissioning, operator training, O&M manuals, as-built documentation, spares list and comprehensive warranty support for 12 months; complete as per approved drawings, specifications and directions of Engineer-in-Charge. |
| 600 | Providing, supplying, designing, detailed engineering, fabricating, transporting, installing, leveling, anchoring, testing and commissioning (SITC) of “ROCK & FOSSIL EXPLORER” (Illuminated Secure Display Case with Touchable Samples and Magnifier on Rails), comprising: MS structural frame (rigid) including anti-corrosion treatment and base anchoring plates; base cabinet joinery with premium cladding in HPL/Corian/Laminate with concealed fixings; glazing in 12 mm extra-clear (low-iron) toughened glass panels cut and polished; UV-bonded glass seams/corners with safety arrised/polished edges; glass-to-base fixing in aluminium/MS channel profile including concealed anti-lift/mechanical restraint; dust-sealing gaskets and seals (IP5X equivalent intent); security hardware including tamper-resistant cam lock, hinges and lockable service access panels; tiered internal shelves (as approved) with hidden support brackets; museum-grade LED linear luminaires CRI>90, 4000K with heat-sink profile (diffused); LED drivers matched to load with internal wiring in base cabinet; full-length heavy-duty linear guide rails (SS/anodized aluminium); carriages/end-stops and optical grade magnifier lenses with holders (as approved) including anti-drop safety tethers; touchable sample bay hardware with secure anti-theft mounts and protective dust lip; interpretive graphics panels printed/laminated; specimen sets for rock cycle (igneous/sedimentary/metamorphic) including Bundelkhand granite and local fossils with mounts; electrical protection and distribution including 230V interface with MCB/RCCB (SPD if required) and PDU with earthing/bonding to MS frame; conduits/cables FRLS/LSZH with glands, segregation and labeling; and complete on-site installation, electrical testing, lighting uniformity verification, rail sliding functional checks, commissioning, operator training, O&M manuals, as-built documentation and comprehensive warranty support for 12 months; complete as per approved drawings, specifications and directions of Engineer-in-Charge. |
| 601 | Providing, supplying, designing, detailed engineering, fabricating, transporting, installing, testing and commissioning (SITC) of “EVOLUTIONARY TIMELINE WALK (Interactive Floor & Wall Graphic)” of overall length 10,000 mm and clear width 2,000 mm comprising: subfloor preparation and leveling as required with underlayment/cushion layer; floor graphic set in UV-resistant commercial-grade print on substrate with anti-skid lamination and protective wear layer; sensor zones Z1–Z10 as concealed sensor layer mats/arrays with zone boundaries including edge-detection intent; zone junction boxes with connectors and Z1–Z10 home-run numbering with conduit take-off to control rack; edge trims/termination in trip-safe metal/rubber profiles with anti-skid margin integration both long sides; DMX RGBW edge LED strip runs in profile including profiles/diffusers/PSU wiring; wall-wash fixtures line aimed at wall graphics (as per design) with mounts and wiring; wall graphic set in UV-resistant matte finish panels on wall mounting substrate with seam alignment and corner return; directional speakers (ceiling/wall mounted) with brackets and wiring mapped to zones; multi-channel amplifier set with zone-mapped outputs including basic routing/EQ and audio DSP (if used); central show controller (Crestron/Extron/AMX or industrial PLC) including I/O interface modules; rack-mounted DMX drivers/decoders matched to load including DMX trunk/daisy-chain termination hardware; IP5X intent control rack/enclosure with filtered ventilation (fans and filter cassettes) and cable entry gland plate; electrical protection and distribution including 230V AC interface with MCB/RCCB, SPD, PDU and sensors PSU with bonding points; network switch (optional) with service/update port; power and ELV cabling in FRLS/LSZH and CAT6/signal/DMX/audio with conduits/trays, segregation, terminations and labeling; earthing/bonding kit with continuity provisions; and complete programming, DMX addressing, audio routing, sensor zone calibration with false-trigger testing, functional testing and 8+ hour continuous performance trial logs, commissioning, operator training, O&M manuals and as-built documentation, with comprehensive warranty support for 12 months; complete as per approved drawings, specifications and directions of Engineer-in-Charge. |
| 602 | Providing, supplying, designing, detailed engineering, fabricating, transporting, installing, testing and commissioning (SITC) of “EARTH’S CORE CUTAWAY EXHIBIT (Sectional Model with Haptics)” complete, comprising (i) rigid MS primary support frame with anti-corrosive treatment and base plates, (ii) premium base cabinet/plinth with toe-kick recess and lockable service access, (iii) FRP/resin relief sculpture (~2.0 m high) with internal stiffeners and textured layers for crust/mantle/outer core/inner core, (iv) automotive-grade PU coating/finish system, (v) concealed mounting inserts/brackets and anti-theft/hidden fixings, (vi) continuous visitor-safe haptic rail with posts and anti-tamper covers, (vii) tactile transducers with mounts and acoustic decoupling (Nos. as required; assumed 3 Nos), (viii) low-frequency amplifier, (ix) microcontroller-based playback/controller with complete programming for vibration mapping and synchronized cue logic, (x) addressable LED strips/pixels with concealed channels and diffusers for layer-boundary cue zones, (xi) LED controller with PSU/driver, (xii) dust-sealed IP5X-intent electronics cabinet with gasketed cam-lock door, filtered ventilation fans and cable glands, (xiii) electrical protection set comprising MCB/RCCB, SPD and PDU, (xiv) complete power and ELV cabling with FRLS/LSZH wires, segregation, conduits/trays, terminations and labeling, (xv) earthing/bonding arrangements with continuity, and (xvi) all transport, leveling, floor anchoring, alignment, functional testing, calibration (comfort-safe vibration + LED uniformity), 8+ hour/day trial runs with logs, on-site commissioning, operator training, O&M manuals/as-built documentation and 12-month warranty; complete in all respects as per approved drawings and directions of Engineer-in-Charge. |
| 603 | Providing, supplying, designing, detailed engineering, fabricating, transporting, installing, testing and commissioning (SITC) of “Earthquake Simulation Platform (2-DOF Motion Base Simulator)” comprising heavy-duty MS base frame overall footprint approx. 2400×2400 mm with leveling pads, welded fabrication and anti-corrosion finish; moving deck 2000×2000 mm with industrial anti-skid deck finish; industrial guard rails 1100 mm height with interlocked gate (min 900 mm clear opening) including latch/hinges and gate sensor provisions; dual emergency stop pushbuttons (gate/entry + operator station) with operator console/enable; 2-DOF pitch-roll electric servo actuation using 2 Nos servo-compatible linear actuators with mounting hardware, mechanical motion limit stops and pinch-point guarding; 2 Nos high-torque AC servo motors with servo drives and required PSUs; industrial motion controller/MCU with HMI and safety-limited motion profiles; safety relay/controller with full interlock/safety chain integration; limit/position sensing (encoders/limits) and feedback wiring; independent 85\\" commercial-grade display with rigid stand; IP5X-intent dust-sealed control rack cabinet with filtered ventilation (fans + filter cassette) and cable gland plate; complete electrical protection including MCB/RCCB, SPD and PDU, FRLS/LSZH power & ELV cabling with conduits/trays, terminations, labeling and earthing/bonding; licensed simulation software/content with motion-display sync logic; complete installation, chemical anchoring, leveling, commissioning/calibration, operator training, O&M manuals/as-built documentation, performance trial logs and 1-year comprehensive warranty; complete in all respects (civil works excluded). |
| 604 | Providing, supplying, design/detailed engineering, fabrication, transportation, installation, testing and commissioning (SITC) of “Volcano Exhibit (Ultrasonic Mist + LEDs Scenic Model)” comprising (i) MS framework and base plinth with lockable service access doors including internal mounting ribs/plates, primer and paint finish, (ii) PU foam sculpting with FRP skin shell including internal cutaway strata detailing, UV-reactive paint zones and final automotive-grade PU protective coat with rock/lava textures, (iii) SS304 water reservoir with top service hatch and corrosion-resistant fittings including integration of 10-head ultrasonic mist module, HI/LO level sensors, auto-cutoff float/level switch and overflow/drain port, (iv) silent blower unit in plinth with ducting/mist channel routing to crater vent including condensate management, visitor-safe diffuser/grill and internal drain line up to service connection point, (v) RGB/Amber LED fixtures aimed at mist plume with internal accent LEDs including aluminium heat-sink mounts, LED drivers, wiring and terminations, (vi) DMX/PLC controller with sequencing logic (mist→glow→rumble loop) including mist relay/PSU control and integration with LED drivers and audio trigger, (vii) audio rumble system comprising subwoofer and amplifier with anti-rattle mounting and safe SPL limit setting, (viii) IP5X intent electronics cabinet with gasketed door, service-only lock, filter cassette, exhaust fans, cable glands and internal mounting, (ix) electrical protection and distribution including MCB/RCCB, SPD, PDU, FRLS/LSZH power cabling, ELV/control cabling, conduits/trays and earthing/bonding complete, and (x) all inclusive transportation, on-site installation, leveling/anchoring, functional testing, 8+ hour/day trial run, commissioning, O&M manuals/as-built documentation, operator training and 12 months warranty, complete as per approved drawings, specifications and directions of Engineer-in-Charge. |
| 605 | Providing, supplying, designing, detailing, fabricating, transporting, installing, testing, commissioning and completing the complete Gallery Theming & Fit-Out Works (Decor + MEP/ELV interface) on turnkey basis for the exhibition hall as per approved layout/drawings, comprising (i) design detailing, setting-out, coordination and shop drawings; (ii) MS stud framework feature walls/linings with gypsum/ply/HDHMR boards including all openings/cut-outs, edge beads, jointing, primer and final paint finish, service access panels and concealed LV/data raceways; (iii) heavy-duty commercial PVC vinyl flooring minimum 2.0 mm including surface preparation, levelling, adhesive/primer and skirting; (iv) pathway markings/graphics as per circulation plan; (vi) special exhibition lighting system including tracks, track heads/accent spots, drivers, dimming/control interface (DMX/0–10V wherever specified), wiring, mounting hardware, aiming/focusing and commissioning; (vii) acoustic treatment works including fabric-wrapped and/or PET acoustic panels with sub-frames, fixings, trims and fire-retardant compliance as applicable; (viii) gallery signage & wayfinding including acrylic/SS letters, UV prints, vinyl graphics and safety/exit signage with all mounting hardware/templates/alignment; (ix) MEP/ELV interface materials within fit-out including concealed conduits/raceways, termination provisions, brackets, fasteners and consumables; (x) all labour for handling/shifting, protection, cleaning, touch-ups, final finishing, local transport and site coordination; and (xi) documentation including O&M manuals/as-builts, operator training and comprehensive maintenance support/warranty for 12 months, complete in all respects. NOTE: FALSE CEILING WORKS ARE EXCLUDED IN TOTALITY (NIL). |
| 606 | G-2 EVOLUTION OF LIFE ON EARTH-SCIENCE GALLERY: Supply, installation, testing and commissioning of Exhibit 1.1 — The Primordial Soup in Zone-1 including complete fabrication with premium finishes, all AV/IT hardware and interactive systems (if any), software/content, wiring, anchoring, safety compliance, calibration, documentation and basic O&M spares; complete as per DPR and approved shop drawings. |
| 607 | Supply, installation, testing and commissioning of Exhibit 1.2 — The First Cells - Architects of the Atmosphere in Zone-1 including complete fabrication with premium finishes, all AV/IT hardware and interactive systems (if any), software/content, wiring, anchoring, safety compliance, calibration, documentation and basic O&M spares; complete as per DPR and approved shop drawings. |
| 608 | Supply, installation, testing and commissioning of Exhibit 2.1 — The Cambrian Explosion in Zone-2 including complete fabrication with premium finishes, all AV/IT hardware and interactive systems (if any), software/content, wiring, anchoring, safety compliance, calibration, documentation and basic O&M spares; complete as per DPR and approved shop drawings. |
| 609 | Supply, installation, testing and commissioning of Exhibit 2.2 — The Great Dying - Life's Greatest Challenge in Zone-2 including complete fabrication with premium finishes, all AV/IT hardware and interactive systems (if any), software/content, wiring, anchoring, safety compliance, calibration, documentation and basic O&M spares; complete as per DPR and approved shop drawings. |
| 610 | Supply, installation, testing and commissioning of Exhibit 3.1 — Pillar Exhibit - The King of the Narmada in Zone-3 including complete fabrication with premium finishes, all AV/IT hardware and interactive systems (if any), software/content, wiring, anchoring, safety compliance, calibration, documentation and basic O&M spares; complete as per DPR and approved shop drawings. |
| 611 | Supply, installation, testing and commissioning of Exhibit 3.2 — The K-Pg Impactor in Zone-3 including complete fabrication with premium finishes, all AV/IT hardware and interactive systems (if any), software/content, wiring, anchoring, safety compliance, calibration, documentation and basic O&M spares; complete as per DPR and approved shop drawings. |
| 612 | Supply, installation, testing and commissioning of Exhibit 4.1 — Life After the Asteroid in Zone-4 including complete fabrication with premium finishes, all AV/IT hardware and interactive systems (if any), software/content, wiring, anchoring, safety compliance, calibration, documentation and basic O&M spares; complete as per DPR and approved shop drawings. |
| 613 | Supply, installation, testing and commissioning of Exhibit 5.1 — Pillar Exhibit - The 'Narmada Man' in Zone-5 including complete fabrication with premium finishes, all AV/IT hardware and interactive systems (if any), software/content, wiring, anchoring, safety compliance, calibration, documentation and basic O&M spares; complete as per DPR and approved shop drawings. |
| 614 | Supply, installation, testing and commissioning of Exhibit 5.2 — The Family Tree in Zone-5 including complete fabrication with premium finishes, all AV/IT hardware and interactive systems (if any), software/content, wiring, anchoring, safety compliance, calibration, documentation and basic O&M spares; complete as per DPR and approved shop drawings. |
| 615 | Supply, installation, testing and commissioning of Exhibit 6.1 — The Engine of Life in Zone-6 including complete fabrication with premium finishes, all AV/IT hardware and interactive systems (if any), software/content, wiring, anchoring, safety compliance, calibration, documentation and basic O&M spares; complete as per DPR and approved shop drawings. |
| 616 | Supply, installation, testing and commissioning of Exhibit 7.1 — The Sixth Extinction? in Zone-7 including complete fabrication with premium finishes, all AV/IT hardware and interactive systems (if any), software/content, wiring, anchoring, safety compliance, calibration, documentation and basic O&M spares; complete as per DPR and approved shop drawings. |
| 617 | Supply, installation, testing and commissioning of Exhibit 7.2 — A Message for Tomorrow in Zone-7 including complete fabrication with premium finishes, all AV/IT hardware and interactive systems (if any), software/content, wiring, anchoring, safety compliance, calibration, documentation and basic O&M spares; complete as per DPR and approved shop drawings. |
| 618 | Supply and installation of exhibit-scope partitions (GI stud, FR boards), thematic cladding/strata textures, paint finish and column wraps; complete including framing, backing, access panels and fixing hardware. |
| 619 | Supply and installation of complete graphics & signage package (UV print on ACP/FR substrate, anti-graffiti laminate, bilingual-ready panels, wayfinding, mounting system); complete. |
| 620 | Supply and installation of exhibit lighting system (track, spots CRI>90, drivers, aiming, local controls) for all exhibits and feature elements; complete. |
| 621 | Supply and installation of AV/IT infrastructure including 42U rack, UPS, managed switches, patch panels, PDUs, Cat6 networking for exhibits, floor boxes, cable trays and labeling; complete. |
| 622 | Design development, detailing, coordination and prototype/mock-up allowance including shop drawing production, integration engineering, FAT readiness and sample approval cycles; complete. |
| 623 | Testing, commissioning, training, documentation (O&M manuals, as-built set) and common spares kit; complete. |
| 624 | G-3 ANCIENT INDIAN SCIENCE GALLERY: Providing, supplying, designing, detailed engineering, shop drawings, fabrication, transport, installation, testing, commissioning and handing-over of Window Diorama – “Sushruta Performing Plastic Surgery” (Economic / Value-Engineered variant) comprising: design/detailing and coordination; enclosure frame in BWR ply/Sal wood with base framing; providing and fixing sheathing panels with seam treatment, primer and final paint finish including lockable rear service access; providing and fixing scenic background on subframe (EPS/HDU mix) including mounting; complete artist paint/finish in naturalistic matte finish; providing and installing FRP figures (standard) with realistic paint (3 nos) with concealed supports; costumes (economy) and museum-grade props/instrument replicas with concealed mounts; supplying and fixing 12mm clear toughened viewing glass with polished safe edges with concealed glazing channel/frame, EPDM gaskets and setting blocks; providing LED accent lighting system with dimming (non-fiber optic) with basic control interface; providing internal electrical protection (MCB/RCCB, SPD and PDU), complete power/ELV cabling with concealed conduits/trunking, cooling fans with replaceable filters, graphic label/signage; complete testing/commissioning/acceptance including focus verification, electrical safety tests and minimum 8-hour endurance run with logs; submission of O&M manuals/as-builts, training and 12 months warranty; complete in all respects. |
| 625 | Providing, supplying, designing, detailed engineering, shop drawings, fabrication, transport, installation, testing, commissioning and handing-over of “Window Diorama – Charak Giving Lecture to Students” (Revised Economic / Value-Engineered variant) comprising: design/detailing and coordination; rigid enclosure frame (economy joinery/MS as approved) including internal deck framing; providing and fixing sheathing panels (ply/MDF as approved) with seam treatment and complete paint finish including lockable service access door; providing and fixing scenic background panels (FRP relief / EPS-HDU mix) on subframe including mounting; complete artist paint/finish in naturalistic matte non-glare finish; providing and installing FRP figures comprising Charak (1 no) and student figures (4 nos) with realistic painting and concealed supports; providing period costumes (cotton/jute drape) and museum-grade props (herbs/scrolls/wooden seats) including mounting; supplying and fixing 12mm clear toughened front viewing glass with polished edges; providing concealed glazing frame/channel with EPDM gaskets, anti-rattle setting blocks and retainers; supplying, installing and integrating 55” 4K commercial signage display (non-transparent) behind glass complete with serviceable mounting frame, anti-vibration pads and anti-theft fasteners; supplying and installing media player for content playback; providing ambient low-level loop audio system comprising speakers and mini amplifier with necessary wiring (non-localized and without trigger logic); providing IP5X intent dust-sealed service bay cabinet with gasketed lockable door, filter cassette, cable gland plate and internal rack, complete cooling fans with replaceable filters; providing electrical protection and distribution comprising MCB/RCCB, SPD and PDU; providing complete power and ELV cabling (FRLS/LSZH) including HDMI/DP/audio cabling with terminations, labeling and concealed conduits/trunking; providing earthing/bonding with continuity testing; developing and supplying economic content package for continuous loop playback; complete testing/commissioning including readability check, audio level setting and minimum 8-hour endurance trial with logs; submission of O&M manuals/as-builts, training and 12 months warranty; complete in all respects. |
| 626 | Providing, supplying, designing, detailed engineering, fabricating, transporting, installing, testing and commissioning of “WINDOW DIORAMA – PATANJALI PERFORMING YOGA” (scenic display with integrated digital backdrop) on turnkey basis comprising: design, coordination and shop drawings; enclosure frame with internal deck, sheathing, lockable rear service access and basic gasketed service bay; scenic cave wall relief on subframe using EPS/foam relief with FRP skin/hardcoat including bezel masking/camouflage frame for recessed display; complete artist finish with seam filling, texture finishing and matte non-glare paint; life-size Patanjali figure with Sheshnag hood in FRP hollow construction including concealed base plate anchorage and service hatch; simplified aura lighting using LED strips/modules with diffuser and driver; 52–55 inch 4K commercial display with recessed mounting hardware and anti-theft fasteners; Android signage media player with mounting and configuration for continuous loop playback; economy content pack for seamless loop playback; screen cavity ventilation with fans and washable/replaceable dust filters; viewing window glazing with 12mm toughened glass including concealed channel/frame, EPDM gaskets, setting blocks and anti-tamper retainers; complete electrical/ELV with MCB/RCCB, SPD, PDU, FRLS wiring, HDMI cabling, concealed conduits/trunking and earthing/bonding; graphics/label/signage; complete installation, alignment, testing, commissioning, endurance run trial with logs, O&M manuals, training and comprehensive warranty for 12 months; complete in all respects. |
| 627 | Providing, designing, detailing, fabricating, supplying, transporting, installing, testing and commissioning of “Window Diorama – Nagarjuna Making Chemical Components (Scenic Display with Atmospheric Mist Effects)” complete, comprising (i) design, coordination and shop drawings; (ii) enclosure frame with internal deck and sheathing including lockable service access door/panel and concealed conduits/cable routes; (iii) scenic laboratory set including FRP relief/HDU textured wall panels, shelves and workbench with matte non-glare finish; (iv) FRP life-size figures (2 nos) with hand-painting and period costumes; (v) vessel replicas/props set with mounts; (vi) concealed ultrasonic water-mist system including SS reservoir, level sensor cut-off, mini fan/dispersion duct, fill/drain kit with ports/tubing, drip tray/secondary containment and service hatch; (vii) warm-white LED under-crucible lighting with drivers and wiring; (viii) dust-sealed electronics/service cabinet with gasketed lockable door, filter cassette, fans, replaceable filters, cable gland plate and earthing stud; (ix) electrical/ELV works including MCB/RCCB, SPD, PDU, FRLS/LSZH cabling, control/sensor wiring and earthing/bonding as per SLD; and (x) transportation, installation, alignment, testing & commissioning, 8+ hour endurance trial with logs, operator training, O&M manuals/as-built documentation, and comprehensive warranty for 12 months; complete as per drawings and directions of Engineer-in-Charge. |
| 628 | Providing, supplying, designing, detailing and preparing shop drawings, fabricating, finishing, packing, transporting, unloading, positioning, installing, testing and commissioning of “Window Diorama – Copper Smelting (Scenic display with simulated fire effects)” complete, comprising design detailing and shop drawings/coordination; enclosure structural frame of MS ribs/studs with anti-corrosion treatment; providing and fixing sheathing panels and internal floor deck including lockable service access door/panels; providing and fixing viewing window glazing system with 12 mm extra-clear toughened glass (approx. 3200×2400 clear opening) with concealed channel/frame, EPDM gaskets/setting blocks (anti-rattle) and anti-tamper concealed retainer with polished safe edges; providing scenic terrain/slag heap build-up using HDU/FRP relief shells with scenic subframe and removable service panel for access, including artist scenic finish in matte non-glare texture with rock/slag painting/ageing; providing clay/mud furnace hero prop with internal heat-safe light chamber and access panel (no real fire/heat), and providing crucible/ingot glow prop with diffuser and concealed wiring with anti-theft fixing; providing and fixing life-size FRP metallurgist figures in action pose with base plates and concealed bolts along with natural-fiber period costumes, and providing tool/prop set (tongs, bellows, ingots, bowls etc.) with concealed brackets/pins and oxidized/verdigris finish; providing LED modules and diffuser/ember bed for furnace/crucible, multi-channel flicker controller (furnace/crucible/ambient), SMPS PSUs (12/24V), dust-sealed electronics bay with gasketed lockable cabinet, gland plate and earthing stud, fans with replaceable filters, electrical protection and distribution system comprising MCB/RCCB, SPD and PDU, complete cabling in FRLS/LSZH with labeling/segregation and concealed conduits/trunking/raceways; complete testing, commissioning including 8+ hour endurance run, glare control and electrical safety checks, submission of O&M manual/as-built documents, training and handover, and comprehensive warranty for 12 months, complete as per drawings, specifications and directions of Engineer-in-Charge. |
| 629 | Providing, supplying, designing, detailing and preparing shop drawings, fabricating, finishing, packing, transporting, unloading, positioning, installing, testing and commissioning of “Window Diorama – Ship Building (Scenic display with maritime scale model)” complete, comprising design detailing and shop drawings/coordination; enclosure structural frame of MS ribs/studs with anti-corrosion treatment; providing and fixing sheathing panels and internal deck including lockable service access door/panels and underfloor wiring access; providing and fixing backdrop panel on rigid substrate including painted coastal horizon in matte finish; providing floor scenic build-up with textured sandy/timber finish over deck base; providing and fixing viewing window glazing system with 12 mm extra-clear toughened glass (approx. 3200×2400 clear opening) with concealed channel/frame, EPDM gaskets/setting blocks (anti-rattle) and anti-tamper concealed retainer with polished safe edges; providing and fixing large-scale ship hull scale model in hardwood including keel member, ribs/frames, planking strips, concealed joinery, edge rounding for visitor safety, teak-look stain with matte protective coat and anti-termite treatment; providing hull mounting/anchorage with concealed base frame/brackets, anti-tip/vibration pads and serviceable fasteners from rear/side; providing tool/prop lot comprising period carpentry tool replicas, coir/jute ropes and anchor stones with concealed pins/brackets and anti-theft fixing concept; providing and fixing life-size FRP shipwright figures in active poses with base plates and concealed bolts; providing concealed lighting system comprising cool-white wash fixtures (daylight simulation) and warm spot fixtures for hull detail highlight including drivers/PSUs and optional timer/show controller interface (if applicable), complete with wiring and controlled aiming to minimize glare on viewing glass; providing dust-sealed electronics bay with gasketed lockable cabinet, cable glands/plates, cabinet fans with replaceable filter cassette; providing electrical protection and distribution system comprising MCB/RCCB, SPD and PDU; complete cabling in FRLS/LSZH and ELV/control (if needed) with labeling/segregation and concealed conduits/trunking/raceways; complete testing and commissioning including light aiming and glare control test, 8+ hour endurance lighting trial with logs, submission of O&M manual/as-built documents, training and handover, and comprehensive warranty for 12 months, complete as per drawings, specifications and directions of Engineer-in-Charge. |
| 630 | Providing, supplying, designing, detailing and preparing shop drawings, fabricating, finishing, packing, transporting, unloading, positioning, installing, testing and commissioning of “Window Diorama – Harappan / Mohenjo-Daro City (Projection-Mapped Architectural Model)” complete, comprising design detailing and shop drawings/coordination; enclosure structural frame in MS with anti-corrosion treatment; providing and fixing sheathing panels, internal base deck and lockable service access door/panel; providing and fixing viewing window glazing system with 12 mm extra-clear toughened glass (clear opening approx. 3200×2400) with concealed channel/frame, EPDM gaskets, anti-rattle setting blocks and anti-tamper concealed retainer with polished safe edges; providing CNC-milled city model base (approx. 3048×2438) in HDU foam/MDF with relief top, perimeter edge frame and concealed lifting points, including primer and matte white high-gain projection paint finish as projection canvas; providing heavy-duty MS tilt frame with adjustable mechanism (30–45°) including hinge, slotted adjustment plate, service-only locking bolts, anti-tip/stability base and concealed anchorage to deck with all anchors/fasteners; providing, supplying and installing 02 Nos. laser projectors (WUXGA class, ~6000 lumens) with suitable optics for complete model coverage with edge blending, including ceiling mounts/brackets with anti-vibration pads and dust-sealed projector enclosures with service hatch, replaceable filter cassette and intake/exhaust fans along with replaceable fan/filter cassette spares; providing media server/workstation (dual outputs) with approved mapping software license, optional gigabit network switch/router and UPS (line-interactive) for stable power; providing electrical protection and distribution comprising MCB/RCCB, SPD and PDU with complete HDMI/DP certified video cabling (02 runs), FRLS/LSZH power and ELV/control cabling (as needed) with labeling/segregation, concealed conduits/trunking and complete earthing/bonding for frame, mounts, enclosures and rack; complete projection mapping setup including mask creation, calibration grid registration, edge blend tuning and focus/throw alignment, followed by testing, commissioning and acceptance including thermal airflow verification, RCCB/insulation/earthing tests and 8+ hour endurance run with logs; submission of O&M manuals/as-built documents, training and handover, with comprehensive warranty for 12 months, complete as per drawings, specifications and directions of Engineer-in-Charge. |
| 631 | Providing, supplying, designing, detailed engineering, fabricating, transporting, installing, testing and commissioning (SITC) of “WINDOW DIORAMA – ANCIENT TOWN & WATER MANAGEMENT (Physical Model with Pepper’s Ghost Water Simulation)” comprising (i) design & detailed engineering/shop drawings, (ii) enclosure frame + body with service access, (iii) viewing window glazing assembly, (iv) beam-splitter glass with adjustable frame @45°, (v) black baffles/masking (anti-ghosting), (vi) physical topographical model (HDU/FRP) with base, (vii) scenic paint and matte protective finish, (viii) concealed 55”+ 4K display with pit/bay mount and safety retention, (ix) dust-sealed ventilation with replaceable filters, (x) PC/workstation with show controller, (xi) touch control panel kiosk/mount, (xii) software & content package including water visuals/logic and calibration masks, (xiii) electrical/ELV with protections, PDU, cabling, conduits and earthing, (xiv) calibration, testing and commissioning including endurance run, and (xv) documentation, O&M manuals/as-builts and training, complete with 12 months warranty, complete in all respects as per approved drawings and Engineer-in-Charge directions. |
| 632 | Providing, supplying, designing, fabricating, finishing, transporting, installing, testing and commissioning (SITC) of “THE PANTHEON OF INDIAN SAGES — STATUE WITH PANORAMIC PEDESTAL” (Set of 8 Nos.) comprising design & detailed engineering/shop drawings; FRP life-size statues (typ. 1830 mm) with internal MS armature, base plates and concealed anti-theft fasteners; faux bronze/marble finish using approved PU paint system with clear coat; panoramic pedestal carcasses (Ø915 / octagon 915 AF, 760 mm high) with recessed mini-diorama niche and lockable service bay; pedestal cladding/finish with edge detailing; mini-diorama niche inserts/reliefs as per schedule; 12 mm toughened glass tops with EPDM gaskets, setting blocks and anti-tamper retainers; internal LED niche lighting complete with aluminium profile/diffuser and matched SMPS/driver; internal wiring/conduits/terminations with earthing/bonding; floor anchoring using chemical anchors/fasteners (excluding civil works); QR plaques with anti-tamper screws; content & hosting package (value-engineered) including Hindi+English audio guides, hosted pages and master QR URL register (1 year); complete testing, commissioning and acceptance trials; documentation/O&M manuals, training, handover and 12-month comprehensive warranty, complete in all respects as per drawings and directions of Engineer-in-Charge. |
| 633 | Providing, supplying, designing and engineering, fabricating, transporting, installing, testing and commissioning of “Touch Screen Kiosk – Ancient Science Encyclopedia” (55\\" 4K UHD PCAP commercial multi-touch, portrait) 2 Nos. comprising (i) Type-A floor-standing kiosk with 1.6mm CRCA powder-coated enclosure, internal stiffeners, intake/exhaust louvers, service access panel, base/anti-tip provisions and internal raceways, (ii) Type-B wall-integrated kiosk with powder-coated recess enclosure box, hinged/removable service access hatch, trim frame and mount rails with ventilation provisions; including supply and integration of 55\\" 4K PCAP 24×7 rated touch display modules, supply of Mini-PC (i5/i7 class) with 16GB RAM, NVMe SSD, Wi-Fi+LAN and OS/kiosk configuration, cooling system with fans and replaceable filter cassettes, security hardware with concealed locks/captive fasteners/tamper-proof provisions, internal power and protection system comprising MCB/RCCB interface, SPD and PDU with FRLS/LSZH wiring, glands and strain relief, data/AV connectivity including Cat6 cabling/patch cords, RJ45 termination, HDMI/DP, Wi-Fi antenna/accessories and cable management, complete earthing and bonding with continuity checks; and including development/provisioning and deployment of encyclopedia application with search and category interface, media support, CMS/admin panel (role-based), kiosk lockdown/watchdog and backup/restore procedure, complete installation and integration with available power/LAN points, calibration and functional/thermal/endurance testing, documentation (O&M manuals/as-builts/QA-ITP records), training to EIC staff and 12 months comprehensive warranty complete in all respects. |
| 634 | Providing, supplying, designing and engineering, fabricating, transporting, installing, testing and commissioning of “Quiz / Activity Corner Setup — Gamified Knowledge Arena (4 Teams)” comprising design/engineering and shop drawings; fabrication of 4 nos MS-clad team podiums with ACP/Corian cladding and access provisions; supply and integration of wired industrial mushroom buzzer buttons and LED status indicator strips for all 4 podiums; supply and integration of USB/IO buzzer interface controller with control rack/equipment bay; providing host console desk (approx. 1200×600) with cable management; supply and installation of host PC (i5/i7 class, dual output) with OS/kiosk configuration and host touch monitor (21–27\\"); supply and wall-mount installation of 65\\"+ 4K commercial main display; providing complete audio system comprising PA grade mixer-amplifier, wall-mounted speakers and wireless mic set; providing DMX/Art-Net controller with DMX RGB wash/strobe fixtures with mounting for event-synced effects; providing complete power protection and earthing/bonding arrangement (MCB/RCCB + SPD + PDU + earthing kit); providing all concealed cabling/terminations and labeling for FRLS/LSZH power, HDMI/DP, Cat6 and DMX; providing and deploying custom quiz software with dual-screen output, scoring/lockout/timers and CMS with import/export, roles and backup/restore with kiosk/secure mode and watchdog auto-restart; complete installation, testing and commissioning including AV/DMX functional tests and 8+ hour endurance run, training to staff, O&M manuals/as-builts and 12 months warranty complete. |
| 635 | Providing, supplying, designing and engineering, fabricating, transporting, installing, testing and commissioning of “Panels with Ancient Subjects & Half-3D Elements” (Tactile Graphic Displays) — Set of 12 Nos., each panel size 1200×900 mm with R10 (typ.) corners, comprising design adaptation and artwork pre-press with tactile zone mapping and master pattern planning; providing 12mm HDHMR substrate panels with CNC cutting, drilling as per template and edge sealing/primer with paint/laminate wrap and moisture protection; providing UV flatbed direct printed graphics with matte/glare-free protective finish intent; providing and fixing half-3D tactile elements (resin-cast/3D printed) including finishing with touch-safe edges and locator pins; providing structural epoxy/PU adhesives with hidden screws/pins and bonding consumables; providing complete anti-theft floating mounting system including SS304 anti-tamper standoffs (4 per panel), concealed French cleat sets, bottom safety clips/anti-lift screws and load-rated wall anchors to achieve 20 mm (typ.) floating gap; complete installation with setting-out, leveling/plumb, maintaining 150 mm panel gaps and installation within AFF band as per drawings, including cleaning; complete QA/ITP checks, acceptance documentation, handover pack with maintenance/cleaning kit; complete packing, transport and safe delivery, with 12 months warranty complete in all respects. |
| 636 | Providing, supplying, designing and engineering, fabricating, transporting, installing, testing and commissioning of complete Gallery Interior Décor & Fit-out Works for the indoor science gallery “Ancient Indian Science Gallery” (approx. 415 Sqm fit-out area) on turnkey basis, excluding HVAC and civil works, comprising design detailing/shop drawings and setting-out/coordination; providing and laying heavy-duty commercial flooring including surface preparation, adhesive/primer, skirting and pathway/wayfinding markings; NO FALSE CEILING IN SCOPE; provide exposed ceiling surface preparation and paint finish; coordinate track lighting supports and exposed cable trays/raceways; providing MS stud framework feature walls/linings/false walls with boards including openings/cut-outs, access panels and concealed raceways; providing complete wall finishing including jointing/putty/primer and approved paint/texture finish; providing thematic cladding/backdrops/column boxing and trims with required service hatches; providing complete graphics package including printed panels/vinyl/UV prints with matte lamination and mounting hardware; providing acoustic treatment works for quiz/activity corner buffer; providing exhibition lighting system including tracks, track heads/accent spots, drivers, wiring, mounting, aiming/focusing and commissioning; providing internal gallery electrical works including protection, wiring/conduits, socket points for exhibit interfaces, earthing and testing; providing ELV infrastructure including conduits/raceways, Cat6 points, terminations/labeling (backbone by others); providing window/opening light control/blackout treatment as approved; complete testing & commissioning, snag rectification, documentation/O&M manuals, training and handover, including packing, transport, handling, protection, scaffolding/supports and consumables, complete in all respects with 12 months warranty. |
| 637 | G-4 FUN-WITH-SCIENCE GALLERY: Supply, Installation, Testing & Commissioning (SITC) of Sympathetic Swing - X complete including structure, casing, mechanism, electricals, internal lighting (if any), graphics, anchoring, safety guards, wiring, documentation & O&M manuals as per DPR/specifications. |
| 638 | Supply, Installation, Testing & Commissioning (SITC) of Sympathetic Swing - Y complete including structure, casing, mechanism, electricals, internal lighting (if any), graphics, anchoring, safety guards, wiring, documentation & O&M manuals as per DPR/specifications. |
| 639 | Supply, Installation, Testing & Commissioning (SITC) of Sympathetic Swing - Z complete including structure, casing, mechanism, electricals, internal lighting (if any), graphics, anchoring, safety guards, wiring, documentation & O&M manuals as per DPR/specifications. |
| 640 | Supply, Installation, Testing & Commissioning (SITC) of Transfer of Momentum (7-ball system) complete including structure, casing, mechanism, electricals, internal lighting (if any), graphics, anchoring, safety guards, wiring, documentation & O&M manuals as per DPR/specifications. |
| 641 | Supply, Installation, Testing & Commissioning (SITC) of Vortex (Large) complete including structure, casing, mechanism, electricals, internal lighting (if any), graphics, anchoring, safety guards, wiring, documentation & O&M manuals as per DPR/specifications. |
| 642 | Supply, Installation, Testing & Commissioning (SITC) of Floating Ball (Bernoulli) complete including structure, casing, mechanism, electricals, internal lighting (if any), graphics, anchoring, safety guards, wiring, documentation & O&M manuals as per DPR/specifications. |
| 643 | Supply, Installation, Testing & Commissioning (SITC) of Lazy Coin (Eddy current) complete including structure, casing, mechanism, electricals, internal lighting (if any), graphics, anchoring, safety guards, wiring, documentation & O&M manuals as per DPR/specifications. |
| 644 | Supply, Installation, Testing & Commissioning (SITC) of Seebeck Siren complete including structure, casing, mechanism, electricals, internal lighting (if any), graphics, anchoring, safety guards, wiring, documentation & O&M manuals as per DPR/specifications. |
| 645 | Supply, Installation, Testing & Commissioning (SITC) of Lines of Force complete including structure, casing, mechanism, electricals, internal lighting (if any), graphics, anchoring, safety guards, wiring, documentation & O&M manuals as per DPR/specifications. |
| 646 | Supply, Installation, Testing & Commissioning (SITC) of Identify a Magnet complete including structure, casing, mechanism, electricals, internal lighting (if any), graphics, anchoring, safety guards, wiring, documentation & O&M manuals as per DPR/specifications. |
| 647 | Supply, Installation, Testing & Commissioning (SITC) of Infinity well complete including structure, casing, mechanism, electricals, internal lighting (if any), graphics, anchoring, safety guards, wiring, documentation & O&M manuals as per DPR/specifications. |
| 648 | Supply, Installation, Testing & Commissioning (SITC) of Illusion with Rings complete including structure, casing, mechanism, electricals, internal lighting (if any), graphics, anchoring, safety guards, wiring, documentation & O&M manuals as per DPR/specifications. |
| 649 | Supply, Installation, Testing & Commissioning (SITC) of Moiré Patterns complete including structure, casing, mechanism, electricals, internal lighting (if any), graphics, anchoring, safety guards, wiring, documentation & O&M manuals as per DPR/specifications. |
| 650 | Supply, Installation, Testing & Commissioning (SITC) of Changing Colours complete including structure, casing, mechanism, electricals, internal lighting (if any), graphics, anchoring, safety guards, wiring, documentation & O&M manuals as per DPR/specifications. |
| 651 | Supply, Installation, Testing & Commissioning (SITC) of Colour Pyramid complete including structure, casing, mechanism, electricals, internal lighting (if any), graphics, anchoring, safety guards, wiring, documentation & O&M manuals as per DPR/specifications. |
| 652 | Supply, Installation, Testing & Commissioning (SITC) of Colour Shadows complete including structure, casing, mechanism, electricals, internal lighting (if any), graphics, anchoring, safety guards, wiring, documentation & O&M manuals as per DPR/specifications. |
| 653 | Supply, Installation, Testing & Commissioning (SITC) of Turning Mask complete including structure, casing, mechanism, electricals, internal lighting (if any), graphics, anchoring, safety guards, wiring, documentation & O&M manuals as per DPR/specifications. |
| 654 | Supply, Installation, Testing & Commissioning (SITC) of Curie Point complete including structure, casing, mechanism, electricals, internal lighting (if any), graphics, anchoring, safety guards, wiring, documentation & O&M manuals as per DPR/specifications. |
| 655 | Supply, Installation, Testing & Commissioning (SITC) of Distorted Mirrors (4 nos) complete including structure, casing, mechanism, electricals, internal lighting (if any), graphics, anchoring, safety guards, wiring, documentation & O&M manuals as per DPR/specifications. |
| 656 | Supply, Installation, Testing & Commissioning (SITC) of Float in Air (Perpendicular Mirrors) complete including structure, casing, mechanism, electricals, internal lighting (if any), graphics, anchoring, safety guards, wiring, documentation & O&M manuals as per DPR/specifications. |
| 657 | Supply, Installation, Testing & Commissioning (SITC) of Light Corridor (Parallel Mirrors) complete including structure, casing, mechanism, electricals, internal lighting (if any), graphics, anchoring, safety guards, wiring, documentation & O&M manuals as per DPR/specifications. |
| 658 | Supply, Installation, Testing & Commissioning (SITC) of Kaleidoscope complete including structure, casing, mechanism, electricals, internal lighting (if any), graphics, anchoring, safety guards, wiring, documentation & O&M manuals as per DPR/specifications. |
| 659 | Supply, Installation, Testing & Commissioning (SITC) of Rotate Your Face complete including structure, casing, mechanism, electricals, internal lighting (if any), graphics, anchoring, safety guards, wiring, documentation & O&M manuals as per DPR/specifications. |
| 660 | Supply, Installation, Testing & Commissioning (SITC) of Head on the Platter complete including structure, casing, mechanism, electricals, internal lighting (if any), graphics, anchoring, safety guards, wiring, documentation & O&M manuals as per DPR/specifications. |
| 661 | Supply, Installation, Testing & Commissioning (SITC) of Complete Mirror Maze (excluding above) complete including structure, casing, mechanism, electricals, internal lighting (if any), graphics, anchoring, safety guards, wiring, documentation & O&M manuals as per DPR/specifications. |
| 662 | Supply, Installation, Testing & Commissioning (SITC) of PIN Art and other small hands-on exhibits complete including structure, casing, mechanism, electricals, internal lighting (if any), graphics, anchoring, safety guards, wiring, documentation & O&M manuals as per DPR/specifications. |
| 663 | Supply, Installation, Testing & Commissioning (SITC) of Activity Desks and Puzzles complete including structure, casing, mechanism, electricals, internal lighting (if any), graphics, anchoring, safety guards, wiring, documentation & O&M manuals as per DPR/specifications. |
| 664 | SITC of Theming walls + feature elements: ACP/PVC + paint system, child-safe corner guards including all materials, fasteners, supports, finishing, anchoring/patch works, testing, commissioning and making good complete. |
| 665 | SITC of Interpretive + wayfinding graphics: Bilingual (Hindi+English), anti-scratch laminate, replaceable panels including all materials, fasteners, supports, finishing, anchoring/patch works, testing, commissioning and making good complete. |
| 666 | SITC of Internal gallery lighting (in scope): Track/linear LEDs, accent lighting to optics & maze, drivers, conduits including all materials, fasteners, supports, finishing, anchoring/patch works, testing, commissioning and making good complete. |
| 667 | SITC of Staff console + storage: Counter + lockable storage + cable management including all materials, fasteners, supports, finishing, anchoring/patch works, testing, commissioning and making good complete. |
| 668 | SITC of Octonorm cases + wooden stands/cabinets: Display cases + storage; HPL laminate; locks; LED including all materials, fasteners, supports, finishing, anchoring/patch works, testing, commissioning and making good complete. |
| 669 | SITC of Installation, testing, documentation, O&M manuals: Site works, FAT/SAT, training, manuals including all materials, fasteners, supports, finishing, anchoring/patch works, testing, commissioning and making good complete. |
| 670 | G-5 EYES ON THE UNIVERSE GALLERY: SITC of Interactive Kiosk-1 \\"Universe Explorer\\" including MS kiosk body with FR/HPL finish, 43\\" touch display, mini-PC, bilingual UI/content, speakers (if required), all wiring, earthing, mounting/anchoring, installation, testing & commissioning complete. |
| 671 | SITC of Interactive Kiosk-2 \\"Optics Simulator\\" including MS kiosk/desk with FR/HPL finish, 32–43\\" touch display, mini-PC, bilingual UI/content, all wiring, earthing, mounting/anchoring, installation, testing & commissioning complete. |
| 672 | SITC of Prism & Lens Hands-on Workbench (mechanical) including MS frame, HPL top, acrylic viewing window, prism mount, lens sliders/rails, LED safe light source, bilingual instruction panel, lockable service bay, wiring, earthing, installation, testing & commissioning complete. |
| 673 | SITC of Galileo Telescope Replica Model with interpretive pedestal including model fabrication (wood/FRP), acrylic protection, bilingual panel, anchoring, finishing, installation and testing complete. |
| 674 | SITC of Telescope Mount Types Demo (manual) including mini alt-az / equatorial demonstrator with safe stops, bearings, MS pedestal, bilingual panel, anchoring, finishing, installation and testing complete. |
| 675 | SITC of Radio Listening Station (open) including console cabinet, headphones with volume limiter, audio player, bilingual panels, wiring, fixing, installation, testing & commissioning complete. |
| 676 | SITC of Space Telescopes Media Display (non-touch) including 43–55\\" 4K display, media player, wall mount, cable concealment, short video loop setup, bilingual captions, wiring, installation, testing & commissioning complete. |
| 677 | SITC of modular thematic wall cladding system with MS frame, FR boards, putty/primer/PU paint, trims, fixing and making good complete (graphics measured separately). |
| 678 | SITC of bilingual zone story wall graphics on FR board/ACP with matte anti-glare lamination, including design adaptation, printing, mounting and fixing complete. |
| 679 | SITC of premium feature panoramic wall graphics (timeline/space telescope hero) with matte anti-glare lamination, including printing and installation complete. |
| 680 | SITC of bilingual interpretive panels/labels on ACP/FR board with matte anti-glare lamination, standoff fixing, complete. |
| 681 | SITC of backlit lightbox panels (spectra/constellations) including LED drivers, acrylic face, printed film, MS box, wiring and fixing complete. |
| 682 | SITC of simple ceiling acoustic/star-canopy panels (select areas) including frame, acoustic backing, fire-retardant fabric/print, fixing complete. |
| 683 | SITC of floor wayfinding graphics + skirting bands in durable laminate/vinyl with protection coat, complete. |
| 684 | SITC of track lights / wall washers (CRI>90) including drivers, wiring terminations, aiming, testing complete. |
| 685 | SITC of exhibit electrical raceways + floor boxes/points including conduits, accessories, termination and making good complete. |
| 686 | SITC of cabinets / storage / undercounter units (lab + AV) including MS frame, HPL finish, locks, hinges, ventilation, complete. |
| 687 | SITC of safety & protection works including corner guards, edge protection, stanchions/rope barriers for model, sealants, surface protection & final touch-ups complete. |
| 688 | SITC of 12U AV/IT rack with PDU, fan tray, patch panel, 16-port managed switch, internal wiring, labeling, complete. |
| 689 | SITC of Cat6 structured cabling (supply, laying, terminations, faceplates, testing) complete. |
| 690 | SITC of Online UPS 2 kVA with batteries, changeover, earthing and commissioning complete. |
| 691 | SITC of HDMI/patch cords/spares kit (assorted) complete. |
| 692 | SITC of surge protection/earthing accessories for AV rack and displays complete. |
| 693 | SITC of bilingual content/UI development for both kiosks including scripts, UI screens, media assets, integration, testing and deployment complete (offline operation). |
| 694 | SITC of short motion graphics/video loops pack (royalty-free) for media display and kiosks, including editing, captions and optimization complete. |
| 695 | SITC of installation labour, tools & tackles for exhibits/decor/graphics including alignment, anchoring, fixing and making good complete. |
| 696 | SITC of testing & commissioning including electrical safety tests, burn-in, punch list closure complete. |
| 697 | SITC of documentation including as-built drawings, wiring diagrams, O&M manuals, asset register complete. |
| 698 | SITC of training & handover for operators/maintenance team complete. |
| 699 | SITC of O&M spares kit (PSUs, cables, one spare media player, headphone pads, cleaning kit, consumables) complete. |
| 700 | G-6 SPACE SCIENCE GALLERY: WINDOW DIORAMA – TIME & DURATION IN ANCIENT INDIA: Providing, supplying, designing, detailing and preparing shop drawings including ITP/QA documentation; fabrication and installation of wood framework with 19mm BWR plywood carcass including plinth, rear service bay, lockable service door and anti-termite treatment; providing CNC carved motif fascia band on ply base with veneer/laminate cladding and automotive-grade PU polish finish; providing and fixing 12mm low-iron toughened anti-reflection viewing glass (approx. 3000×2100 mm) complete with EPDM gasket and silicone dust-proof sealing; providing cyclorama curved backdrop with internal scenic base panels/platform and paint finish; supplying and fixing FRP custom figures (5 nos) complete with hand painting and mounting hardware; supplying and placing historical props replicas set (Ghati Yantra, Shanku etc.) complete with pedestals/mounts; supplying and installing warm white dimmable LED spotlights (12 nos) complete with drivers and mounting; supplying and installing fiber optic star-field kit complete with illuminator, fiber harness, termination and sparkle effect behind cyclorama; supplying and commissioning lighting/audio controller complete with external control panel wiring and programming for Day/Night modes; supplying and commissioning PIR sensor with directional speaker set complete with audio playback interface for PIR-triggered audio; providing concealed cabling/conduits with junction boxes, earthing and testing for power & ELV, serviceable from rear; including transport, handling, installation, fixing/anchoring, testing & commissioning, training, manuals/as-builts and comprehensive warranty for 12 months, complete in all respects as per approved drawings and directions of Engineer-in-Charge. |
| 701 | WINDOW DIORAMA – TELESCOPE & EQUIPMENT: Providing, supplying, designing, detailing and preparing shop drawings including ITP/QA documentation; fabrication and installation of composite carcass comprising 19mm BWR plywood with heavy-duty G.I. metal stud partitions including rear service bay framing, lockable rear access doors and all hardware; providing historical side exterior finish in rustic wood veneer with PU polish including trims; providing modern side exterior finish in metallic ACP/high-gloss including trims; providing and fixing 12mm extra-clear toughened glass front viewing panel (seamless/UV bonded) complete with continuous gasket and sealant line for dust-proof sealing and safe edge finishing; supplying and fixing FRP figures (5 nos) complete with painting and mounting hardware; supplying and installing vintage telescope replica with modern console mock-ups complete as props & sets; supplying, integrating and commissioning digital eyepiece systems comprising 7\\" IPS LCD screens (2 sets) with media players (2 sets) including eyepiece ports, optical baffles, micro-vent path and concealed cable routing; providing and commissioning Pepper’s Ghost hologram rig complete with high-brightness monitor, beam-splitter glass at 45 degrees, enclosed rig bay and service hatch; providing and installing LED spotlights with drivers/controllers (12 nos) dimmable warm/cool white as per zone positions; providing and installing ventilation fans with filters (4 nos) for cooling and air circulation; providing cabling/conduits/earthing hardware complete with isolator/MCB, SMPS/power supplies, glands, terminations and internal routing for power and data distribution; including transport, handling, fixing/anchoring, testing & commissioning, calibration/alignment, training, manuals/as-builts and comprehensive warranty for 12 months, complete in all respects as per approved drawings and directions of Engineer-in-Charge. |
| 702 | Chandrayaan-3 Moon Landing: Providing, supplying, designing, detailing and preparing shop drawings including ITP/QA and sequence logic; fabrication and installation of welded MS base frame with terrain subframe; providing sculpted lunar terrain build-up comprising PU foam core with resin skin and durable paint/texture finish; supplying and integrating LVM3 1:15 model complete with vertical lift assembly including lift carriage, guide rails, actuator/stepper drive, couplings, limit switches and mechanical hard stops; supplying and integrating Vikram 1:10 model complete with controlled descent gantry/actuator arrangement including anti-sway guide, suspension bracket, limit switches and hard stops; supplying and fixing Pragyan rover model 1:10 (static/articulated) with mounts; providing dust-sealed IP5X electronics enclosure bay with filtered fan cooling and internal mounting; providing controller network (PLC/Arduino/ESP32) with required I/O, DMX interface, emergency stop interlocks and custom programming for show sequence; providing DMX LED lighting system (blast + surface wash) with drivers, mounting and aiming; providing fog machine with ducting, vent grille/diffuser mesh and DMX interface; providing tactile transducers (2 nos) with rumble mounts and isolation pads; providing directional speaker with amplifier and playback interface for countdown/cues; providing visitor control console (buttons/touchscreen) with emergency stop device and mounting at approx. 1050 mm AFF; providing cabling/conduits, glands, earthing kit and cable management with terminations; including transport, handling, fixing/anchoring, testing & commissioning, cycle testing, training, manuals/as-builts and comprehensive warranty for 12 months, complete in all respects as per approved drawings and directions of Engineer-in-Charge. |
| 703 | ISRO Mission to Mars – Mangalyaan: Providing, supplying, designing, detailing and preparing shop drawings including ITP/QA documentation; providing MS base frame/mount structure with premium dust-resistant finish including globe mount frame and service hatch hardware; supplying and installing Mars globe Ø1219 mm acrylic/FRP shell complete with internal diffuser and internal LED kit (LED strips/drivers) and high-resolution topography finish; supplying and installing orbital arm assembly complete with hub bearing and shaft components including hub plates, collars, keyways and mechanical hard stops; supplying and installing high-torque DC geared motor with encoder complete with motor drive/encoder feedback module for variable speed control; supplying and installing slip-ring assembly complete with cable management including glands, strain relief, drag chain/spiral wrap and segregation of power/signal wiring; supplying and fixing MOM model 1:10 with solar arrays (deployed configuration); supplying and fixing PSLV XL model 1:15 static display model with base; supplying and installing touchscreen kiosk 32 inch with PC (commercial grade) complete with kiosk enclosure/stand and mounting base; providing IP5X dust-sealed control cabinet with filtered ventilation and cooling fans/filters (typ. 700×500×300 mm); providing control software and programming for orbit speed profile (periapsis/apoapsis), user speed control, data uplink game and simulated imagery loop with required interlocks; providing power distribution and wiring complete with isolator/MCB, SMPS/power supplies, terminations, earthing point and concealed conduits/glands/internal routing; including transport, handling, installation, alignment/calibration, testing & commissioning, training, manuals/as-builts and comprehensive warranty for 12 months, complete in all respects as per approved drawings and directions of Engineer-in-Charge. |
| 704 | India’s Shot to Sun – Aditya-L1: Providing, supplying, designing, detailing and preparing shop drawings including ITP/QA documentation; providing MS frame powder coated with cladding panels (museum-grade dust-resistant finish) complete; supplying and installing circular LED Sun display comprising P2.5 indoor circular module Ø1500 mm complete with seamless edge mask ring, mounting ring, fasteners and safety retention lanyards; providing LED controllers with SMPS and power distribution for circular LED display; providing and installing cooling fans with filters (4 nos) and ventilation louvres integration for active cooling; providing Earth model Ø305 mm complete with motorized axial rotation mechanism including geared motor, bearings, mount shaft, hidden cover and service hatch; supplying and fixing Aditya-L1 model complete with secure mounting bracket arm with anti-theft fixings and cable routing for illumination; providing “Lagrange point” demo module (knob/slider) complete with mounting base and polycarbonate guard cover; providing payload filter console interface (buttons/slider or small touch panel) for visitor selection; providing microcontroller/PC for content sync and UI complete with wiring harness; providing IP5X controller enclosure (typ. 600×500×250 mm) with cable glands, rear serviceability; providing concealed cabling/conduits with glands, earthing kit, fasteners, containment and terminations; including transport, handling, installation, integration, testing & commissioning, training, manuals/as-builts and comprehensive warranty for 12 months, complete in all respects as per approved drawings and directions of Engineer-in-Charge. |
| 705 | Peeping into GSLV Payload Fairing: Providing, supplying, designing, detailing and preparing shop drawings including QA/ITP documentation; providing heavy-duty MS base frame complete with anchoring plates/bolts, finish and alignment; supplying and installing FRP split payload fairing halves complete with gelcoat finish including inserts/backing plates, center seam alignment guides and rubber bumpers; providing and installing double-acting pneumatic cylinders (2 Nos.) complete with mounting/linkage, adjustable end stops and limit tabs; providing oil-free silent air compressor complete with reservoir tank, regulator, moisture trap and pressure gauge; providing pneumatic control package comprising solenoid valve block (5/2), flow controls, pressure switch and emergency dump valve complete with required fittings; providing GSAT satellite cradle with deployable solar arrays complete with servo/stepper motors/drivers and rotary-joint cable routing; providing internal LED floodlights (4 Nos.); providing audio SFX system comprising amplifier and speaker; providing PLC/microcontroller with I/O modules and visitor console (Launch/Separate push button with indicator lamps); providing sensors/interlocks comprising limit switches (open/close) and emergency stop switchgear with wiring; providing IP5X enclosures with fans/filters for electronics bay and air supply bay; providing 12 mm toughened glass safety railing system including posts/clamps/shoes with lockable maintenance gate (approx. 4572 mm run) complete; providing concealed cabling/conduits/glands/earthing kit and pneumatic tubing/fittings with strain relief and routing; including transport, handling, installation, alignment, testing & commissioning with cycle checks, training, manuals/as-builts and comprehensive warranty for 12 months, complete in all respects as per approved drawings and directions of Engineer-in-Charge. |
| 706 | Bharatiya Space Station (BSS) – Docking Simulator: Providing, supplying, designing, detailed engineering and preparing shop drawings including QA/ITP documentation; providing powder-coated MS enclosure framework with panels forming dust-sealed volume complete with service doors/panels and hardware; providing tempered glass front complete with continuous gasket seal and lockable service access provisions; supplying and fixing BSS station model 1:20 complete with LED position lights and interior cutaway detailing including fixed mount base/pedestal; supplying and fixing Gaganyaan module model complete with docking head bracket assembly including anti-sway guide and contact-safe bumper; providing and installing 3-axis linear motion system (X/Y/Z) complete with precision rails, ball screw/belt drives, stepper motors and mechanical hard stops to achieve typical travels X=600 mm, Y=400 mm and Z=300 mm; providing motion electronics including stepper drivers, motion controller (PLC/MCU/PC) and SMPS/power supplies integration; providing safety sensors/interlocks including limit switches, home sensors, emergency stop and door interlock (motion disabled on service door open); providing station LED lighting with chase pattern wiring/fixtures complete; providing industrial grade joystick console complete; providing 24 inch monitor with HUD overlay PC and docking HUD software pack complete; providing audio system comprising amplifier and speaker for “Dock lock” cue; providing IP5X electronics enclosure complete with fans/filters and filtered active cooling arrangement; providing cable management including cable drag chains, concealed conduits, glands, earthing kit and all wiring/terminations; including transport, handling, installation, alignment/calibration, programming, testing & commissioning, training, manuals/as-builts and comprehensive warranty for 12 months, complete in all respects as per approved drawings and directions of Engineer-in-Charge. |
| 707 | Space Travel & Its Future – Agencies & Current Options: Providing, supplying, designing, detailing and preparing shop drawings including QA/ITP documentation; providing wall-aligned MS frame with concealed stiffeners complete with ACP/laminate outer cladding and lockable access doors/panels; providing backlit acrylic sandwich information panels (approx. 100 sq.ft) complete with printed graphics, diffuser, aluminium LED channels, LED strips and LED drivers (serviceable/replaceable) to achieve uniform backlighting without hotspots; supplying and installing 55 inch commercial UHD display (24/7 rated) complete with VESA mounting bracket; providing IR touch overlay frame for 55 inch display complete with integration; providing SFF/industrial PC with storage and compute for interactive UI (PC/GPU if required) complete; providing dust-sealed IP-style PC enclosure cabinet complete with cable glands and service door lock; providing cooling fans with replaceable filters (4 Nos.) complete; supplying and fixing five numbers 1:50 rocket models (FRP/resin/3D print composite) with detailed finish complete; providing model mounting cradles with anti-theft fasteners (5 sets) including rubber lining, anti-tip pins and optional acrylic mini-guard lip as required; providing complete electrical/ELV works including MCB/isolator, SMPS/power distribution, terminations for LED drivers, cable trunking/conduits, glands, earthing and internal wiring; providing audio amplifier and speaker set (if used) complete with wiring; providing interactive software/content pack comprising “Cosmic Ticket” calculator and “Launch Drag Race” simulation with locked admin/service menu including integration and stability testing; including transport, handling, installation, testing & commissioning, training, manuals/as-builts and comprehensive warranty for 12 months, complete in all respects as per approved drawings and directions of Engineer-in-Charge. |
| 708 | Life of a Star – Stages & Lifecycle: Providing, supplying, designing, detailing, fabricating, transporting, installing, testing and commissioning (SITC) of exhibit “LIFE OF A STAR – STAGES & LIFECYCLE” comprising (i) design, detailing & shop drawings with QA/ITP documentation; (ii) fabrication of MS frame dust-sealed dark box enclosure with matte black non-reflective panel cladding including internal baffles, light-leak control and lockable service access; (iii) supplying and fixing sealed anti-glare viewing glass (typ. 12 mm) with gasket/retainer and dust-proof sealing; (iv) supplying, assembling and aligning holographic display system (Option A: 4-sided pyramid prism with high-brightness LCD source) complete with protective cover/frame and black baffles; (v) supplying and integrating workstation PC (SFF/industrial) with dedicated GPU and storage; (vi) supplying and integrating holographic display driver/controller with required interfaces; (vii) supplying and installing “Star Maker” rotary dial console with industrial rotary encoder/module, pedestal, USB/IO interface and concealed conduit; (viii) supplying and integrating audio 2.1 system comprising satellite speakers, dedicated subwoofer, amplifier and vibration isolation pads; (ix) providing ventilation fans with replaceable filters for dust-controlled airflow; (x) providing IP5X dust-sealed enclosure for PC/optics bay with lockable service door and cable glands; (xi) complete electrical/ELV including MCB/isolator, SMPS/power supplies, internal wiring harness, concealed conduits/cable routing, glands, earthing kit and service panel interlock provision; (xii) software/content development and integration for lifecycle simulation logic (dial mass input to stage selection) with audio/LED cue triggers and admin/service update mode; and (xiii) transport, installation, testing & commissioning, training to operators, supply of manuals/as-built documentation, complete in all respects with 12 months comprehensive warranty, as per drawings, specifications and direction of Engineer-in-Charge. |
| 709 | Statue Set – Ancient & Modern Space Scientists/Astronauts: Providing, supplying, designing and detailed engineering including shop drawings and coordination; supply of FRP life-size statues (No. 5) complete with PU paint finish; fabrication and installation of MS pedestal subframes with granite/Corian cladding including adjustable feet and anchoring arrangements; providing and fixing “Future Scientist” selfie podium complete; providing and fixing mirror/back panel complete with framing and alignment; providing and fixing backdrop modules comprising ACP panel modules on MS studs/cleats with shadow gaps and timeline graphic band complete; providing, wiring and integrating ELV interaction package comprising PIR sensors, directional speakers, sound modules, SMPS 24V DC bus, MCB/isolator, junctions, wiring harness and earthing complete; providing dust-sealed ELV/power/control cabinet with filtered vents/cooling provision complete; complete installation including anchoring, wall fixing, concealed conduit trunk routing, terminations and dressing; testing, calibration and commissioning including PIR range calibration, audio localization check, continuity/earthing, pedestal leveling, demonstration, training and supply of manuals/as-builts; packing, transportation, unloading and placement at site, complete in all respects with 12 months warranty; Work to be executed complete in all respects as per approved concept and direction of the Engineer-in-Charge. |
| 710 | Touch Screen Information Kiosk\\" (Interactive Digital Stations). Providing, supplying, designing and detailed engineering (GA/fabrication/ELV shop detailing), fabricating floor-standing touch screen information kiosk enclosure in 1.6 mm CRCA sheet (laser cut, bend, welded, ground smooth; stiffeners as required) complete with service access provisions, automotive-grade powder coating with pretreatment, supply and fixing of 32\\" portrait industrial 24/7 PCAP touch monitor, supply and fixing of toughened glass front panel (if separate) with gasket, supply of industrial mini PC (i5 11th Gen+, 8GB RAM, 256GB NVMe, Windows IoT), supply and fixing of monitor mount brackets with VESA plate and security fasteners, providing cooling fan(s) with grills and filter mesh, providing MCB, surge protection socket/power strip and internal power routing as per schematic, complete internal power & data cabling with conduits, glands, ferrules and strain relief, providing earthing kit (stud, lugs, bonding) with continuity, providing concealed lock, hinges and tamper fasteners, internal cable management accessories, complete software deployment with kiosk mode configuration and touch calibration, including transportation, positioning, installation, testing and commissioning (dimensional/DFT, touch dead-zone, 8-hour burn-in, thermal under load, electrical continuity & earthing resistance, lock/door cycle & tamper checks) complete, submission of O&M manual/as-builts and user training, with 12 months comprehensive warranty, complete in all respects as per approved drawings and specificationsand direction of the Engineer-in-Charge. |
| 711 | 3D/Half-3D Thematic Panels (Tactile Graphic Displays): Providing, supplying, designing and detailing (15 Panel, shop details and setting-out), supplying and fabricating 12mm HDHMR/MDF CNC finished panels 1219×914 mm with 2mm radius routed edges, complete edge sealing + PU finish layers, providing graphics layer by UV print on 3mm ACP bonded to 12mm base with industrial adhesive (durable, scratch/fade resistant), providing and fixing tactile relief element sets (layered acrylic and/or 3D printed elements) complete with concealed pins/structural adhesive and required finishing including R2 edge fillet and PU clear coat where required, providing and fixing concealed French cleat mounting system with anti-lift set screw for floating offset 10–15mm complete with all fixings/anchors suitable for wall type, including adhesives/consumables, packing, transportation, handling, installation and alignment to 1400mm AFF panel centerline with ±2mm tolerance and consistent gap control, complete testing/QA as per checklist and submission of O&M/installation record, with 12 months warranty, complete in all respects as per approved drawings and specifications; and direction of the Engineer-in-Charge. |
| 712 | Scale Models – Planets & Moon Phases (Suspended Celestial Array): Providing, supplying, designing, detailing and setting-out (layout, drop coordination and shop detailing), fabricating and supplying FRP/HIPS suspended celestial bodies complete with internal insert plates and M8/M10 threaded hanging inserts including (i) fabrication of small/medium spheres as per schedule, (ii) Jupiter sphere Ø610 mm, (iii) Saturn sphere Ø508 mm, (iv) Saturn ring (optional) with concealed struts and balanced assembly, complete scientific surface preparation and PU paint (scientific) finish, providing and fixing complete ceiling rigging system comprising SS304 aircraft wire rope, adjustable grippers, micro-turnbuckles, shackles and all accessories complete with M10/M12 chemical anchors and eye plates to structural slab including drilling, and providing secondary safety wire set for each sphere, including installation at height with hanging, leveling, balancing, sway control and drop adjustment, providing, supplying, fabricating and installing Interactive Moon Phase Kinetic Demo unit complete with base frame (900×900 mm), rotating armature (radius 600 mm), moon sphere Ø300 mm, geared motor and bearing hub, slip ring/cable routing, complete electrical/ELV system with MCB/isolator, SMPS/drivers, motor controller, LED “Sun” illuminator with driver, dial/encoder interface and earthing, providing 6 mm polycarbonate safety guard around moving arm, including packing, transportation, handling, installation, testing and commissioning (proof-load/inspection of ceiling points, safety cable verification, balance/sway checks, smooth rotation and pinch-point safety, guard integrity and LED thermal check) and submission of O&M/installation record, with 12 months warranty, complete in all respects as per approved drawings and specifications; and direction of the Engineer-in-Charge. |
| 713 | SPACEX Shuttle Virtual Riders (Multi-User VR Experience Zone): Providing, supplying, designing and detailed engineering / shop detailing for pods, console, cable routing and ELV schematic; fabrication and supply of 4 Nos. Astronaut Pods complete with shell enclosure, base frame, seat mounting rails, service access hatch, rounded edges and wipeable finish, including supply and fixing of automotive-grade bucket seats with headrest and all mounting hardware; providing and fixing integrated tether management arm assemblies with anti-pinch cover, internal routing and strain relief for USB-C fiber optic link/tether line; providing integrated hygiene storage compartments with ventilation; providing and fixing dust-proof ventilated lockable workstation cabinet with filtered intake/exhaust fans and cable glands for 2 Nos. high-performance PCs, along with hygiene storage cabinet 600×450×1800 mm; providing and fixing operator console furniture 1200×600 mm with keyboard shelf and session start/stop provision; supply of 4 Nos. Meta Quest 3 (128GB) VR headsets complete with elite battery strap and silicone face covers, supply of 2 Nos. high-performance workstation PCs (i9/Ryzen9, 32GB DDR5, RTX 4070 Ti, 1TB NVMe), supply of operator PC with monitor, supply of USB-C fiber optic link cables (4 Nos.) and Wi-Fi 6E router (1 No.); providing complete power distribution system comprising MCB/isolator, surge protection and UPS with provisioning for headset charging, and providing conduits/trunking with segregated routing, glands, internal cabling, earthing kit and bonding of all metal pods/cabinets; including transportation, installation, integration, testing and commissioning comprising tether snag/strain relief test, cabinet thermal check under load, headset pairing with kiosk mode lock, session synchronization and operator controls verification, and trip hazard inspection with floor cable routing audit, complete submission of O&M/manuals and user training; further providing 2 Nos. custom VR shows (bespoke development, optimization and QA for supplied system) and providing 10 Nos. VR show licences (single-site commercial use) complete with content deployment/configuration in operator workflow, with 12 months warranty/support for supplied system integration, complete in all respects as per approved drawings and specifications and direction of the Engineer-in-Charge. |
| 714 | Gallery Theming & Fit-Out Works (NO FALSE CEILING): Providing, supplying, installing, testing and completing (wherever applicable) the complete Gallery Theming & Fit-Out Works (Decor + MEP/ELV interface) on turnkey basis for the exhibition hall comprising design detailing and setting-out/coordination; providing MS stud framework feature walls/linings with gypsum/ply/HDHMR boards including all openings/cut-outs, edge beads, jointing, primer and final paint finish, service access panels and concealed raceways for LV/data cabling; providing heavy-duty commercial flooring minimum 2.0 mm PVC vinyl (or approved equivalent) including surface preparation, levelling, adhesive/primer, skirting; providing pathway markings/graphics as per circulation plan; providing special exhibition lighting system including tracks, track heads/accent spots, drivers, dimming/control interface (DMX/0–10V wherever specified), wiring, mounting hardware, aiming/focusing and commissioning; providing acoustic treatment works including fabric-wrapped and/or PET acoustic panels with sub-frames, fixings, trims and fire-retardant compliance as applicable; providing gallery signage & wayfinding including acrylic/SS letters, UV prints, vinyl graphics and safety/exit signage with all mounting hardware, templates and alignment; providing MEP/ELV interface materials within fit-out including concealed conduits/raceways, termination provisions, brackets, fasteners and consumables; including all labour for handling/shifting, protection, cleaning, touch-ups and final finishing, and all miscellaneous hardware/consumables, local transport and site coordination to deliver a complete ready-to-use gallery. NOTE: False ceiling/suspended ceiling works are explicitly excluded; ceiling to remain exposed soffit with only necessary surface-mounted supports/cable trays/tracks as approved. |
| 715 | P-1 Planetarium Theatre (Decor): Wall-to-wall carpet, stain-resistant, Class-B FR; underlay & transitions included. |
| 716 | Double-layer acoustic panels with mineral wool backing and fabric finish to 3.0 m height around full perimeter; aluminium trims; concealed fixings. |
| 717 | MR-MDF subframe with HPL/PU finish; edge banding; GI brackets; height 1.2 m around full perimeter. |
| 718 | HPL/solid-surface skirting; corners and end-caps; continuous at public edges. |
| 719 | Premium reclining theatre chair with cup holder; FR fabric; ergonomic design; integrated aisle markers. |
| 720 | Low-glare step-edge/aisle LED with DMX drivers/decoders and local control nodes; addressing & labelling. |
| 721 | Anchoring, alignment, row spacing, fixing; inspection and load test per row; as-builts. |
| 722 | On-site aiming/focus; scene setup & dimming curves; addressing; documentation. |
| 723 | Digital Planetarium Projection System & Components (a) Fulldome Video Projection System- Projectors: Quantity: 2 Units, Illumination Technology: Laser Phosphor, Brightness: Up to 14,000 ANSI lumens, Contrast Ratio: 20,000:1 (Dynamic), Resolution: 4K UHD per projector, On-Dome Resolution: Over 3850 pixels across the diameter, Lifespan: 20,000 hours of operation. (b) PC Cluster & Servers Graphics Servers: Quantity: 2 Units, Model: High-performance Rack-mounted Server (4RU), CPU: High-performance Workstation Class Processor (e.g., Intel Xeon W-2225 or equivalent), Memory: 32 GB, Storage: 2GB SSD System Drive, 8GB SSD Content Drive, Graphics: Professional-grade Graphics Card with Frame Sync capability, OS: Professional/Enterprise Grade Stable Operating System. Host cum Audio Server: Quantity: 1 Unit, Model: High-performance Rack-mounted Server (4RU), CPU: High-performance Workstation Class Processor (e.g., Intel Xeon W-2225 or equivalent), Memory: 32 GB, Storage: 2GB SSD System Drive, 8GB SSD Content Drive, Graphics: Professional-grade Graphics Card, OS: Professional/Enterprise Grade Stable Operating System. (c) Automatic Alignment & Calibration System: Function: Automated geometry, gamma, and blend correction for seamless imaging across multiple projectors, Components: Permanently installed digital cameras for viewing the dome, Runtime: Fully automated process should take less than 2 minutes. (d) 5.1 Digital Surround-Sound System: Configuration: 5.1 Surround Sound, Speakers: 5 x Professional Cinema Series Loudspeakers, Subwoofer: 1 x Professional Cinema Series Sub-bass Cabinet, Amplifiers: Professional Cinema Amplifiers with integrated loudspeaker control, Signal Processing: Digital audio networking protocol for signal distribution, with DSP unit and digital mixer. (e) Software & Control System: Software: Fulldome Control and Visualization Software, Features: Real-time astronomical rendering , timeline-based show creation with scrubbing capability, drag-and-drop interface , and integrated Theater Automation, Content: Must include extensive astronomical databases (Stars, Asteroids, Galaxies) , support for scientific datasets , and compatibility with numerous media formats. Control: To include an operator console with 2 dimmable monitors (dimmable to 1%) , a tablet for remote control , and a programmable digital manual controller. (f) Fulldome Content Package: Licensed Fulldome Show: 2 Unit of a 4K 2D show with a 3-year license, Additional Shows: An initial collection of fulldome shows provided free of charge. Clips & Sequences: A collection of royalty-free clips and sequences for presentations. (g) Customs Duty: Applicable Customs Duty @ 11% on imported value of INR 4,19,35,000.00 |
| 724 | Projection Dome: FRP Projection Dome Screen: Diameter: 12 meters, Type: Horizontal, Self-supported hemispherical, Material: Fiberglass Reinforced Plastic (FRP), Surface: Non-perforated for best projection quality, Internal Finish: Smooth, single-dome effect, off-white, non-glossy, Construction: 12 segments and a top cap, assembled at site, Thickness: 3.5-5 mm mean, Weight: Approx. 1.5 Tons |
| 725 | Services & Local Items Installation & Commissioning: Complete supply, installation, integration, testing, and commissioning of the entire planetarium system. Uninterruptible Power Supply (UPS): 2 x 10 KVA parallel redundant UPS. Warranty, Maintenance & Operation: 1-year comprehensive warranty on the complete installation, 2 years additional Comprehensive Maintenance Service (AMC) post-warranty, Daily operation services included in the contract period, On-site \\"show-stopper\\" spare parts supply, 24/7 remote support. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
