Tender For Special Repair/Renovation, Addition And Alteration Works At Rx-I Buildings, Rx-Ii Buildings, Mess-Ii (Training Centre) Laborator Room And Store Room Of Training Centre At annual rate contract Charbatia Under Ge (I) (Cg) Bhubaneswar
Tender Value
1.03 Crore
Estimated cost
Bid Submission
08 Jul 2026
2 days left
EMD
1.78 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
CHARBATIA → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair/Renovation, Addition And Alteration Works At Rx-I Buildings, Rx-Ii Buildings, Mess-Ii (Training Centre) Laborator Room And Store Room Of Training Centre At annual rate contract Charbatia Under Ge (I) (Cg) Bhubaneswar
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick walls/ concrete surface, etc. including raking out joints, hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises, and depositing serviceable materials where directed and leaving the work clear of any plastering complete all as specified and directed. |
| 2 | M/L PCC pading in hirizontal or vertical surfaces including necessary form work in cement concrete 1:2:4 type B-o(12.5 mm graded stone agg.) 40mm thick complete all as specified and directed. |
| 3 | Material and Labour for rendering 15 mm thick in CM (1:4) including supply and mixing of WPC @3% by weight of cement on concrete surface of roof finished even and smooth without using extra cement over and including neat cement slurry @ 3 Kg /Sqm complete all as specified and directed. |
| 4 | M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and directed. |
| 5 | Material and labour for providing water proofing treatment with a layer of APP based polymeric membrane, 3mm thick (minimum), weighing 3.50 Kg/Sqm reinforced with polyster non woven fabric (weighing not less than 160 gm/Sqm) over a tack coat of dustrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surface and Apply two coat of Aluminium paint of any surfaces description, over 10cm in width or girth,not otherwise described complete all as specified and directed. (Note : The overlaps shall be of minimum 75mm on longitudinal direction and 100mm on transverse direction) |
| 6 | Dismantling of existing tanks exc 250 Ltrs n exc 500 Ltrs and removing to store complete all as specified and directed. |
| 7 | S&F 500 Ltr capacity rotational moulded polyethyene water storage tanks (Cylindrical vertical with closed tap) twisted and fixed in position including 25 mm bore size of ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed all as specified in SSR Part-I complete all as specified and directed. (Make : Sintex Polycon ISI marked) |
| 8 | Dismantling of plain or corrugated steel sheeting any gauge any thickness incl nainital or similar pattern roof covering complete all as specified and directed. |
| 9 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel steet 0.50-0.53 mm thick of an colour having tensile strength of 550 Mpa with hot dip mettalic coating of aluminium alloy (galvalume 150 gms/sqm total of both sides, AZ 150 of BMT 0.45mm measuring 0.53mm thick with finish coat as per ASTM A-792 or AS 1392) and wall sheet coated with 25 micron thick paint on top and back coating on sheet shall be 10 micron as in roof covering/ cladding to wall, fixed with self tapping screwes as specified and also surface should be dust free. (alloy of 55% aluminium, 43.5% zinc,1.5% silicon). MAKE: TATA BLUESCOPE STEEL Colorbond XRW steel OR EQUIVALENT (Life prior to corrosion to perforation by weathering in the natural elements of 20 years from date of manufracturer) complete all specified and directed |
| 10 | S&F pre-painted galvalume aluminum zinc coating GI based plain steel steet 0.50-0.53 mm thick of an colour having tensile strength of 550 Mpa with hot dip mettalic coating of aluminium alloy (galvalume 150 gms/sqm total of both sides, AZ 150 of BMT 0.45mm measuring 0.53mm thick with finish coat as per ASTM A-792 or AS 1392) and wall sheet coated with 25 micron thick paint on top and back coating on sheet shall be 10 micron as in ridge of roof, fixed with self tapping screwes as specified and also surface should be dust free. (alloy of 55% aluminium, 43.5% zinc,1.5% silicon). MAKE: TATA BLUESCOPE STEEL Colorbond XRW steel OR EQUIVALENT (Life prior to corrosion to perforation by weathering in the natural elements of 20 years from date of manufracturer) complete all specified and directed |
| 11 | M&L One coat of synthetic enamel paint on old steel surfaces, over 10cm in width or grith not other wise described complete including preparation of old paint surface complete all as specified and directed. |
| 12 | M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed. |
| 13 | M&L for Preparing newly plastered surfaces of walls and applying two coats of distemper oil emulsion including one coats of priming complete all as specified and directed. |
| 14 | Material and labour for prepration of old plastered or unplastered internal surfaces of wall and applying one coat of oil bound distemper complete all as specified and directed. |
| 15 | Dismantling of wall and ceiling boards (fibre pulp,insulation etc) or insulation boards/slabs any thickness incl cover fillets complete all as specified and directed. |
| 16 | M&L Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately), fixed to Aluminium sections with screws complete all as specified and directed. |
| 17 | S&F Anodised aluminium snap grid frame work for celling Size of grid 605X605mm. (i) Aluminium sections incorporated in frame work shall conform to IS 733, IS 737 and IS 1285. (ii) The snap grid consist of anodized aluminium main/cross tee of size as indicated.(b) Workmanship:- (i) Snap grid frame work shall be fixed to ceiling with supporting hanger consisting of 6mm dia mild steel rod, J bolts with necessary bolts, nuts and washers all as manufacturer’s instruction.(ii) The main and cross tees shall be jointed at junction/crossings withanodized aluminium angle bracket of size as indicated, if not indicated it shall be 15mmxl5mmx1.5mm, weighing 0.12 Kg per running metre, fixed with sutiable mild steel, bolts nuts and washers, all as per manufacturer’s instructions. (iii) The snap grid (main/cross tee section) shall be supported at ends all along the wall with anodized aluminium angle of size as indicated, if not indicated it shall be 40mmx25mmx2mm, weighing 0.36 Kg per running metre. (iv) Size of the snap grid shall be as indicated. (v) PVC protected sheeting shall be used to avoid scratches, damage to the framework while fixing to ceiling complete all as specified and directed. |
| 18 | Taking down chowkats or frames with shutter (without taking off shutters from the frame) exc 1.50 qm and n exc 4.0 Sqm each incl removing to store complete all as specified and directed. |
| 19 | Taking down Chowkhats or frames (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and directed. |
| 20 | M & L Plain, solid, II Class hard wood straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 21 | S&F30mmFlush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats complete all as specified and directed. |
| 22 | S&F40mmFlush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats complete all as specified and directed. |
| 23 | M & L two coat of synthetic enamel paint over a coat of pink primer on wooden surfaces incl preparation of new wooden surfaces complete all as specified and directed. |
| 24 | M & L one coat of synthetic enamel paint on old painting surface wooden painting surfaces complete all as specified and directed. |
| 25 | S & F 100 mm long butt hinges MS medium weight cold rolled complete all as specified and directed. |
| 26 | S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 27 | S&F 300mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 28 | S&F 150mm Aluminium handles, cast type, anodised complete all as specified and directed |
| 29 | S&F Mortice lock, vertical type, size 100 mm, 4 liver brass type complete all as specified and directed |
| 30 | S&F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed |
| 31 | S&F Aluminium Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed |
| 32 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 33 | M&L Double charged Virified Ceramic tiles 8 to10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 34 | M & L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and directed. |
| 35 | M & L for rendering 10mm thick in CM 1:4 as in backing coat for fixing wall tiles complete all as specified and directed. |
| 36 | M&L Double charged Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, fixed in walls as dado/skrtings, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 37 | Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 38 | Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21,100mm long (2 no.) suitable handle (1no.) complete all as specified and directed. |
| 39 | Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed. |
| 40 | S & F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed. |
| 41 | S & F 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane complete all as specified and directed. |
| 42 | Demolition of plain cement concrete (Unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 43 | M & L for 75 mm thick PCC (1:3:6) Type C-2 using 20 mm graded stone aggregate as in floor/plinth protection/footpath even and smooth using extra cement complete all as specified and directed. |
| 44 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasketetc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge complete all as specified and directed. |
| 45 | S&F 12mm thick Prelaminated particle board, exterior grade, prelaminated prelaminated both sides with decorativewith decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 46 | Excavating over areas, n exc1.5 m deep and getting out loose soil for plinth beams etc complete all as specified and directed. |
| 47 | All as above sl no 2 item for each additional 1.5m or part thereof in depth beyond the first 1.5m |
| 48 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out loose soil complete all as specified and directed. |
| 49 | M&L Plain cement concrete in foundation filling & mass concrete type D-2 , 1:4:8 (40mm graded stone agg) complete all as specified and directed. |
| 50 | Demolition of Brickwork or stone/boulder masonry,built in cement mortar or cement lime mortar, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 51 | Demolition of cement Concrete of any description and in any position not otherwise specifically provided remove the reinforcement separately complete all as specified and directed. |
| 52 | M/L brick work with sub class 'B' st or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 53 | Ditto but half brick thick wall built in CM 1:4 |
| 54 | M/L DPC in hirizontal or vertical surfaces including necessary form work in cement concrete 1:2:4 type B-o(12.5 mm graded stone agg.) 40mm thick complete all as specified and directed. |
| 55 | Supply only integral waterproofing compound complete all as specified and directed. |
| 56 | M/L providing Reinforcement cement concrete lintel upto 1.5Mtr clear span 1:4 with type B-1, 1:2:4(20mm graded stone agg) complete all as specified and directed. |
| 57 | M&L TMT bars 10mm dia and over cut to length bent to shape reqd incl crancking bending and binding with steel wire annelead not less than 0.9 mm dia complete all as specified and directed. |
| 58 | M&L TMT bars 8 mm dia and over cut to length bent to shape reqd incl crancking bending and binding with steel wire annelead not less than 0.9 mm dia complete all as specified and directed. |
| 59 | M&L Providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in motar, complet, in walls using Type B1 20mm 1:2:4 aggregate complet all as specifed and directed. |
| 60 | M&L Reinforce cement concrete for beams, cantilivers etc RCC 1:2:4 type B-1 (20mm stone aggregate ) complete all as specified and directed. |
| 61 | M&L Reinforce cement concrete for columns, pillers etc RCC 1:2:4 type B-1 (20mm stone aggregate ) complete all as specified and directed. |
| 62 | M&L slab supported on walls , beams & colmns etc as in roof & the like using RCC 1:2:4 type B-1 (20mm stone aggregate ) complete all as specified and directed. |
| 63 | M/L for rendering 15mm thick on other than fair faces of brick work in CM 1:6 finished even and smooth complete all as specified and directed. |
| 64 | Form work to soffits of suspended slab such as roof slab etc not exc 200 mm thick complete all as specified and directed. |
| 65 | Form work to sides and soffits of floor or roof beams, beam haunchings, lintels etc rough finished surfaces of concrete complete as specified |
| 66 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet re-inforced with MS sqare tube in opening as per specification and drg complete all as specified and directed. |
| 67 | S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain cover PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rails lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement , S&F, in the frame at site as per specification and shown on drawing complete all as specified and directed. |
| 68 | S&F, 125mm long aluminium anodized barrel tower bolts of extureded section complete all as specified and directed. |
| 69 | S&F 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised fixed type B21 complete all as specified and directed. |
| 70 | S&F, 125mm long aluminium handles cast type, anodized complete all as specified and directed. |
| 71 | M&L 5mm thick rendering on concrete surfaces in CM 1:3 as in ceiling complete all as specified and directed. |
| 72 | M&L steel water tubing med grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floor boare of pipe 20mm complete all as specified and directed. |
| 73 | M&L steel water tubing med grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floor boare of pipe 15mm complete all as specified and directed. |
| 74 | S&F Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 75 | S&F angle valve cock chromium plated fancy type 15mm bore with flange make complete all as specified and directed. |
| 76 | S&F stop valve cast copper alloy screwed down lugh pressure with crutch or butterfly handle screwed with both ends for iron pipe 15 mm bore complete all as specified and directed. |
| 77 | S&F PVC connection 15mm size 450mm long with brass union at each end of PVC connection complete all as specified and directed. |
| 78 | S&F 600mmx450mm bevelled edge mirror of selected quality glass mounted on 6mm thick commercial ply and fixed to woodden plugs with chromium plated brass screws and cut washers complete all as specified and directed. |
| 79 | S&F PVC water tank 500 ltr capacity open or close rotational moulded polythene water storage tank (cylinderical, verticle with closed top fixed in position complete all as specified and directed. |
| 80 | S&F ball brass valve high pressure with polythene float and fly nut complete screwed for Iron pipe 20mm bore complete all as specified and directed. |
| 81 | S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed. |
| 82 | S&F PVC (SWR) floor trap 75mm dia of outlet plain with grating including jointing with solvent cement complete all as specified and directed. |
| 83 | S&F PVC (SWR) pipe 75mm bore single socketed in any length with rubber rings joints laid in trenches or in floor complete all as specified and directed. |
| 84 | S&F Vitreous china wash down water closet pan (Pedstal pattern), white (including fixing bolts)squalting pan of pattern white with 'P' or 'S' trap front or back inlet and fost rest any pattern including connection to trap and to flushing pipe including seat cover etc complete all as specified and directed. |
| 85 | S&F PVC low level flushing cistern 10 ltre capacity syphonic action type white with inlet ball valve flot valve handle and bracket , flushing pipe etc complete all as specified and directed. |
| 86 | S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed. |
| 87 | M/L Hardcore of guage not exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to true surface with broken stone or bolders complete all as specified and directed. |
| 88 | M&L for 75mm thick Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate under floor as sub base complete all as specified and directed. |
| 89 | M&L for 25mm thick Cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate under floor finishes complete all as specified and directed. |
| 90 | M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchcoloured cement to match complete all as specified and directed. |
| 91 | M&L glazed coloured tiles (300x200x6-7mm thick in floors etc set & jointed in neat cement to match but on vertical surfaces`complete all as specified and directed. |
| 92 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 93 | M/L 3 coat of white washing on ceiling including preparation of surfaces complete all as specified and directed. |
| 94 | S/F Steel ventilator with top hung shutter including hinges, steel peg stay, complete fixed type with glazing bar including complete painting complete all as specified and directed. |
| 95 | M&L providing precast cover slab for manholes etc chullah water hoods chajjas etc in cement concrete 1:2:4 type B1 (20mm graded aggegate ) set in CM 1:4 complete all as specified and directed. |
| 96 | S&F Vitreous china Wash basin white type of size 550x400 mm including CP waste fitting&waste pipe etc complete all as specified and directed. |
| 97 | S & F Pillar taps, cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe & fixed 15 mm bore dia of pipe and fixed complete all as specified and directed. |
| 98 | S&F Sheet Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium platedbracket guaed and railing 60cm long complete all as specified and directed. |
| 99 | S&F Health faucet(ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall book including making connections and fixed in position complete all as specified and directed. |
| 100 | M & L PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on wall bore of pipe 110 mm complete all as specified and directed. |
| 101 | M & L PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on laid in trenches, bore of pipe 110 mm complete all as specified and directed. |
| 102 | Supply and fix Reinforced concrete pipes, class NP2, bore of pipe 150mm laid and jointed complete with collars complete all as specified and directed. |
| 103 | Material and labour for Plain Cement Concrete (1:3:6) Type C-2 (using 40 mm graded brocken stone aggregate) as in bed to drain pipe including packing under and haunching against the sides of pipes with concrete after they are laid and tested in 150 mm dia pipe complete all as specified and directed. |
| 104 | M & L PVC (SWR) bends, 110 mm bore complete all as specified and directed. |
| 105 | M & L PVC (SWR) bends with oval access door, 110 mm bore complete all as specified and directed. |
| 106 | M&L for RCC Septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for 50 users complete as shown in CE Lucknow Zone Drg No TD/750 dated 21 Mar 2018 Sheet No 1/2 & 2/2 and all as specified and directed. |
| 107 | M&L formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work vertical or to batter complete all as specified and directed. |
| 108 | M&L formwork to sides of pillars, posts, struts, piers, columns and stanchions square, rectangular etc complete all as specified and directed. |
| 109 | RCC for foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete type B1 1:2:4 (using 20 mm stone aggregate) complete all as specified and directed. |
| 110 | Demolition of reinforced cement concrete in any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 111 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 112 | M/L Plain cement concrete in foundation filling & mass concrete type D-2 , 1:4:8 (using 40mm graded stone agg) complete all as specified and directed. |
| 113 | Excavating in trenches, in soft/loose soil n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out etc complete all as specified and directed. |
| 114 | Returning filling in including spreading , levelling, watering & well ramming in layers n exc 25 cm soft/loose soil complete all as specified and directed. |
| 115 | Removing excavated material soil n exc 50m & depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed. |
| 116 | M/L for two coats of cement base paint on NEWLY PLASTERED SURFACESS OF WALLS over a coat of cement wash incl preperation of surfaces complete all as specified and directed. |
| 117 | M/L for one coats of cement base paint on old surfacess of walls over a coat of cement wash incl preperation of surfaces complete all as specified and directed. |
| 118 | M&L MS Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooksnand hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-410 W(Gde E-250) quality B complete all as specified and directed. |
| 119 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces, over 10cm in width or grith not other wise described complete all as specified and directed. |
| 120 | M/L Plain cement concrete in foundation filling & mass concrete type D-2 , 1:4:8 (using 40mm graded stone agg) complete all as specified and directed. |
| 121 | M&L Reinforce cement concrete for columns, pillers etc RCC 1:2:4 type B-1 (20mm stone aggregate ) complete all as specified and directed. |
| 122 | Form work to sides of pillars, posts, columns etc rough finished surface of concrete in square rectangular or polygonal complete all as specified and directed. |
| 123 | M&L Provinding cement concrete for copings, kneelers, kerbs etc using 20mm aggregate Type B1 1:2:4 complete all as specified and directed. |
| 124 | Taking down carefully aluminium/copper point wiring any type including batten/casing caping for light/ fan/bell/socket or power and including unscrewing from board, fitting and fixure such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified and directed. |
| 125 | Material and labour for point wiring for light point with 1.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade IS694-1990 controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through PVC conceal conduit medium grade of size 20 mm with all accessories on wall/floor/ceiling including necessary chipping /grooving etc with 16G MS pressed steel terminal box with 3mm thick laminated sheet cover for mounting of fittings like switch, socket and fan regulator complete and making good the disturbed surafce (including necessary painting to match the existing surface) complete all as specified and directed. |
| 126 | Ditto as item No.2 but for fan point controlled by one switch through regulator. |
| 127 | Ditto as item No.2 but for One 3 pin socket outlet 5/6 Amps, on the independent board. |
| 128 | Ditto as item No.2 but for One 3 pin socket outlet 5/6 Amps, on the same board with other switches |
| 129 | All as per item No. 2 above but with 2.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade for one 3 pin 15/16 Amps socket out let controlled by one switch on independent board. |
| 130 | S & F switch piano, flush type, single pole one way 5/6 Amp complete all as specified and directed. |
| 131 | S & F switch piano 15/16 Amp flush type complete all as specified and directed. |
| 132 | S & F socket outlet 3 Pin, 6 Amp flush type complete all as specified and directed. |
| 133 | S & F socket outlet 15/16 Amp flush type complete all as specified and directed. |
| 134 | S & F stepped type electronic fan regulator flush type for ceiling fan on the phenolic laminated sheet complete all as specified and directed. |
| 135 | M & L for ceiling rose PVC/Polycarbonate, isolated body 63.5 x 23.5mm 3 terminals complete all as specified and directed. |
| 136 | Supply and fixing in replacement LED tube light fittings 1 x 20 watts, 230 volts, 2 feet long complete with all accessories internally pre-wired and including connecting up with twisted flexible cable of 0.75 sq mm 3 core copper conductor from ceiling rose to light fittings complete including taking down old UNSV light fitting complete all as specified and directed. |
| 137 | Supply and fixing in replacement LED tube light fittings 1 x 20 watts, 230 volts, 4 feet long complete with all accessories internally pre-wired and including connecting up with twisted flexible cable of 0.75 sq mm 3 core copper conductor from ceiling rose to light fittings complete including taking down old UNSV light fitting complete all as specified and directed. |
| 138 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size including taking down old UNSV light fitting complete all as specified and directed. |
| 139 | Supply and fixing sheet metal enclosure DB SPN 240 volts 6 way double door type with rated bus bar for fixing MCB complete all as specified and directed. Make-Indoasian /Havells/Legrand/Standard |
| 140 | Supply and fixing sheet metal enclosure DB SPN 240 volts 4 way double door type with rated bus bar for fixing MCB complete all as specified and directed. Make-Indoasian /Havells/Legrand/Standard |
| 141 | Supply and fixing MCB SPN 240 volts 40 to 63 Amps, 10 kA, complete all as specified and directed. Make Indoasian/Havells Standard/Legrand. |
| 142 | Supply and fixing MCB SP 240 volts 6 to 32 Amps, 10 kA, 'B' curve complete all as specified and directed. Make Indoasian/Havells Standard/Legrand. |
| 143 | Supply and fixing sheet metal enclosure with single pole and neutral enclosure with at two pin and earth plug and socket with one single pole MCB 20 Amp, 10 kA, 'C' curve operated on 240 volt AC supply complete all as specified and directed. |
| 144 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including cutting hole to wall of suitable size and surface as per existing by plastering complete all as specified and directed. |
| 145 | M&L for sub main wiring with two single core PVC insulated, PVC sheathed stranded copper conductor (FRLSH) cable of size 2 x 4 sq mm unsheathed drawn in PVC conduit concealed and 2 x 4 sq mm PVC insulated unsheathed copper conductor as continous earth continuity conductor drawn in including taking down old UNSV submain wiring complete all as specified and directed. |
| 146 | M&L for sub main wiring with two single core PVC insulated, PVC sheathed stranded copper conductor (FRLSH) cable of size 2 x 6 sq mm unsheathed drawn in PVC conduit concealed and 1 x 6 sq mm PVC insulated unsheathed copper conductor as continous earth continuity conductor drawn in including taking down old UNSV submain wiring complete all as specified and directed. |
| 147 | M & L for dismanteling existing AC Plant duct on ceiling/wall inside RX bldg including on dismaanteling work and removing from site at a distance not more than 100 Mtr from work site and closing of duct near AC plant room complete all as specified and directed. (Note : UNSV AC duct user property only). |
| 148 | Taking out existing AC of capacity 1.5/2 Ton window/Split AC unit by carefully disconnecting existing electrical connection, removing aside, and refixing after completion of work to same location including checking of all electrical connection & replacing electrical cables connection if found damaged, checking for gas leakage and refill and claning of AC with water jet system as required at site etc and testing satisfactory complete all as specified and directed. |
| 149 | Supply and fix wall mounted fan, AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers and surface as per existing by plastering complete all as specified and directed. |
| 150 | Supply and fixing pointed Air termination, five pointed , copper rod 12 mm dia and 600 mm long fixing with two nos nuts and washers complete all as specified and directed |
| 151 | Supply and fixing Copper strip 20 x 3.15 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and directed |
| 152 | Test point terminal block made of gun metal or phosphorus bronze size 75 mm x 75mm x 25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hex head screen complete all as specified and directed. |
| 153 | M&L for Polymer insulators for fixing of earthing strip complete all as specified and directed. |
| 154 | M&L earthing complete with copper earth plate electrode of size 600 x 600 x 3.15 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead of GI strip 20X3 mm by means of copper bolts, nuts, check nuts and washers/brazing welding of galvanised iron or steel, all as shown in electrical plate No. 3 connected to earthing test point and including dismantling complete all as specified and directed.Note:- The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:1.5:3, type A1 cover slab, 50 mm thick reinforced with 8 mm dia TMT bar @ 140 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, 20 mm bore medium grade GI watering pipe, 15 mm bore GI light grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender