|
| 1 | Disconnecting XLPE cable of any size from MCB/MCCB/Busbar chamber / LT cables etc for repair /replacment job and reconnecting cable after replacing worn out /damaged lugs, proper clamping, extended terminal link, repair to panel door replacement of door hinges, painting to disturbed surface complete etc all as specified and directed by Engineer-in-charge |
| 2 | M/L for painting of LT panel indoor/outdoor of any size with one coat synthetic enamelled paint of existing colour after proper cleaning , dusting, de-rusting complete all as specified and directed by Engineer in charge |
| 3 | Supply and fix in replacement of Bus bar chamber box outdoor type made out of mild steel CRCA sheet 3.15mm thick duly painted with synthatic enamal paint (internally and externally) over a coat of red oxide primer and including aluminum bus bar four nos of capacity 200A and fixing with angle iron of size 40x40x5 mm of hight 1.2 M above ground level including PCC foundation complete all as specified and directed |
| 4 | Supply and fix in replacement of Bus bar chamber box outdoor type made out of mild steel CRCA sheet 3.15mm thick duly painted with synthatic enamal paint (internally and externally) over a coat of red oxide primer and MCCB 160A 4 Pole- Qty 01 as incomer and outgoing aluminum bus bar four nos of capacity 200A and fixing with angle iron of size 40x40x5 mm of hight 1.2 M above ground level including PCC foundation complete all as specified and directed |
| 5 | Supply and fix in replacement of Bus bar chamber box outdoor type made out of mild steel CRCA sheet 3.15mm thick duly painted with synthatic enamal paint (internally and externally) over a coat of red oxide primer and MCCB 250A 4 Pole Qty 01 as incommer and outgoing aluminum bus bar four nos of capacity 300A and fixing with angle iron of size 40x40x5 mm of hight 1.2 M above ground level including PCC foundation complete all as specified and directed |
| 6 | Supply, installing, testing and commissioining of LT cubical panel board, 440 Volts, 50 Hz, 3 phase, 4 wire out door type weather vermin, dust proof front operated with adequate air ventilation at sides and back fabricated out of 3.15 mm thick CRCA sheet with double door shutter and locking arrangements, cable trays cable lugs etc including provision for taking out incoming and outgoing cables duly marked with relevetted letter plates of appropriate size for each feeder cables danger boards etc, suitable to accommodate and including the following mentioned fittings; floor mounted with PCC 1:2:4 type B1 platform; nut,bolts, washers etc for grouting and painting with powder coated epoxy finish of approved colour over a coat of red oxide primer including taking down old unserviceable existing LT Panel board with all accessories all as specified and as directed comprising the following:- (i) Bus bar chamber consisting of four Nos aluminium bus bar duly sleeved of capacity 400 Amps for phases and neutral duly insulated with PVC sleeves RYB, mounted on heavy duty epoxy insulation in separate compartment.(ii) LED type indicating lamps (RYB) with holders controlled by fuzes and switches.(iv) Panel board internal wiring with suitable rated PVC insulated copper conductors.(v) MCCB 200 Amps,415V, 4 Pole, 35 KA - 01 No (In coming)(vi) MCCB 63 Amps, 415V, 4 pole, 16 KA - 05Nos (Out going) |
| 7 | Supply, installing, testing and commissioining of LT cubical panel board, 440 Volts, 50 Hz, 3 phase, 4 wire out door type weather vermin, dust proof front operated with adequate air ventilation at sides and back fabricated out of 3.15 mm thick CRCA sheet with double door shutter and locking arrangements, cable trays cable lugs etc including provision for taking out incoming and outgoing cables duly marked with relevetted letter plates of appropriate size for each feeder cables danger boards etc, suitable to accommodate and including the following mentioned fittings; floor mounted with PCC 1:2:4 type B1 platform; nut,bolts, washers etc for grouting and painting with powder coated epoxy finish of approved colour over a coat of red oxide primer including taking down old unserviceable existing LT Panel board with all accessories all as specified and as directed comprising the following:- (i) Bus bar chamber consisting of four Nos aluminium bus bar duly sleeved of capacity 1000 Amps for phases and neutral duly insulated with PVC sleeves RYB, mounted on heavy duty epoxy insulation in separate compartment.(ii) LED type indicating lamps (RYB) with holders controlled by fuzes and switches.(iv) Panel board internal wiring with suitable rated PVC insulated copper conductors.(v) MCCB 800 Amps,415V, 4 Pole, 65 KA - 01 No (In coming)(vi) MCCB 500 Amps, 415V, 4 pole, 50 KA - 01Nos (Out going)(vii) MCCB 200 Amps, 415V, 4 pole, 50 KA - 03Nos (Out going) |
| 8 | Supply, installing, testing and commissioining of LT cubical panel board, 440 Volts, 50 Hz, 3 phase, 4 wire out door type weather vermin, dust proof front operated with adequate air ventilation at sides and back fabricated out of 3.15 mm thick CRCA sheet with double door shutter and locking arrangements, cable trays cable lugs etc including provision for taking out incoming and outgoing cables duly marked with relevetted letter plates of appropriate size for each feeder cables danger boards etc, suitable to accommodate and including the following mentioned fittings; floor mounted with PCC 1:2:4 type B1 platform; nut,bolts, washers etc for grouting and painting with powder coated epoxy finish of approved colour over a coat of red oxide primer including taking down old unserviceable existing LT Panel board with all accessories all as specified and as directed comprising the following:-(i) Bus bar chamber consisting of four Nos aluminium bus bar duly sleeved of capacity 200 Amps for phases and neutral duly insulated with PVC sleeves RYB, mounted on heavy duty epoxy insulation in separate compartment.(ii) LED type indicating lamps (RYB) with holders controlled by fuzes and switches.(iv) Panel board internal wiring with suitable rated PVC insulated copper conductors.(v) MCCB 125 Amps,415V, 4 Pole, 25 KA - 01 No (In coming)(vi) MCCB 63 Amps, 415V, 4 pole, 16 KA - 04 Nos (Out going) |
| 9 | Supply, installing, testing and commissioining of LT cubical panel board, 440 Volts, 50 Hz, 3 phase, 4 wire out door type weather vermin, dust proof front operated with adequate air ventilation at sides and back fabricated out of 3.15 mm thick CRCA sheet with double door shutter and locking arrangements, cable trays cable lugs etc including provision for taking out incoming and outgoing cables duly marked with relevetted letter plates of appropriate size for each feeder cables danger boards etc, suitable to accommodate and including the following mentioned fittings; floor mounted with PCC 1:2:4 type B1 platform; nut,bolts, washers etc for grouting and painting with powder coated epoxy finish of approved colour over a coat of red oxide primer including taking down old unserviceable existing LT Panel board with all accessories all as specified and as directed comprising the following:-(i) Bus bar chamber consisting of four Nos aluminium bus bar duly sleeved of capacity 400 Amps for phases and 200 Amps for neutral duly insulated with PVC sleeves RYB, mounted on heavy duty epoxy insulation in separate compartment.(ii) LED type indicating lamps (RYB) with holders controlled by fuzes and switches.(iv) Panel board internal wiring with suitable rated PVC insulated copper conductors.(v) MCCB 250 Amps,415V, 4 Pole, 50 KA - 01 No (In coming)(vi) MCCB 100 Amps, 415V, 4 pole, 25 KA - 03Nos (Out going)(vi) MCCB 63 Amps, 415V, 4 pole, 16 KA - 03Nos (Out going) |
| 10 | Supply, installing, testing and commissioining of LT cubical panel board, 440 Volts, 50 Hz, 3 phase, 4 wire out door type weather vermin, dust proof front operated with adequate air ventilation at sides and back fabricated out of 3.15 mm thick CRCA sheet with double door shutter and locking arrangements, cable trays cable lugs etc including provision for taking out incoming and outgoing cables duly marked with relevetted letter plates of appropriate size for each feeder cables danger boards etc, suitable to accommodate and including the following mentioned fittings; floor mounted with PCC 1:2:4 type B1 platform; nut,bolts, washers etc for grouting and painting with powder coated epoxy finish of approved colour over a coat of red oxide primer including taking down old unserviceable existing LT Panel board with all accessories all as specified and as directed comprising the following:-(i) Bus bar chamber consisting of four Nos aluminium bus bar duly sleeved of capacity 400 Amps for phases and neutral duly insulated with PVC sleeves RYB, mounted on heavy duty epoxy insulation in separate compartment.(ii) LED type indicating lamps (RYB) with holders controlled by fuzes and switches.(iv) Panel board internal wiring with suitable rated PVC insulated copper conductors.(v) MCCB 250 Amps,415V, 4 Pole, 50 KA - 01 No (In coming)(vi) MCCB 100 Amps, 415V, 4 pole, 25 KA - 04Nos (Out going) |
| 11 | Supply and fix in repairs MCB TPN 63 Amp, breaking capacity 415 V - 50 Hz, fixed thermal and Fixed magnetic setting type, fixed in existing panel & connecting complete all as specified & directed |
| 12 | Supply and fix in repairs MCCBs 63 Amp, Four Pole, breaking capacity 10 KA, 415 V - 50 Hz, fixed thermal and Fixed magnetic setting type, fixed in existing panel & connecting complete all as specified & directed |
| 13 | Supply and fix in repairs MCCBs 100 Amp, Four Pole, breaking capacity 16 KA, 415 V - 50 Hz, fixed thermal and Fixed magnetic setting type, fixed in existing panel & connecting complete all as specified & directed |
| 14 | Supply and fix in repairs MCCBs 125 Amp, Four Pole, breaking capacity 16 KA, 415 V - 50 Hz, fixed thermal and Fixed magnetic setting type, fixed in existing panel & connecting complete all as specified & directed |
| 15 | Supply and fix in repairs MCCBs 160 Amp, Four Pole, breaking capacity 16 KA, 415 V - 50 Hz, fixed thermal and Fixed magnetic setting type, fixed in existing panel & connecting complete all as specified & directed |
| 16 | Supply and fix in repairs MCCBs 200 Amp, Four Pole, breaking capacity 35 KA, 415 V - 50 Hz, fixed thermal and Fixed magnetic setting type, fixed in existing panel & connecting complete all as specified & directed |
| 17 | Supply and fix in repairs MCCBs 250 Amp, Four Pole, breaking capacity 35 KA, 415 V - 50 Hz, fixed thermal and Fixed magnetic setting type, fixed in existing panel & connecting complete all as specified & directed . |
| 18 | Supply and fix in repairs MCCBs 400 Amp, Four Pole, breaking capacity 35/36 KA, 415 V - 50 Hz, fixed thermal and Fixed magnetic setting type, fixed in existing panel & connecting complete all as specified & directed |
| 19 | Supply and fix in repairs MCCBs 500/630 Amp, Four Pole, breaking capacity 50 KA, 415 V - 50 Hz, fixed thermal and Fixed magnetic setting type, fixed in existing panel & connecting complete all as specified & directed |
| 20 | Supply and fix in repairs MCCBs 800 Amp, Four Pole, breaking capacity 50 KA, 415 V - 50 Hz, fixed thermal and Fixed magnetic setting type, fixed in existing panel & connecting complete all as specified & directed |
| 21 | Supply and fix in replacement of onload change over switch 200 A 4 pole with enclosure complete all as specified and directed by Engineer in charge |
| 22 | Material and labour for repiring /welding work including replacemnt of hinges, locking arrangements , painting to disturbed area of LT Panel /Bus bar chamber box complete all as specified and directed by Engineer in charge |
| 23 | Supply and fixing in replacement of spreader terminal for MCCB upto 250A 4 pole complete all as specified and directed |
| 24 | Supply and fixing in replacement of spreader terminal for MCCB 400A 4 pole complete all as specified and directed Please Enable Macros to View BoQ information |
| 25 | Supply and fixing in replacement of spreader terminal for MCCB 400A 4 pole complete all as specified and directed Please Enable Macros to View BoQ information |
