|
| 1 | De-sludging & Cleaning of septic tanks, manhole, sludge chamber etc by manual digging out and fitting of concenteated sludge including dewatering and cleaning, removing silt , sludge, sludge water and any other forign materials and depositing the same into excavated pits exceeding 1.5 m depth at places n. exc 100 m as directed by Engr-in-Charge . Returning and filling in excavated earth after deposting sludge including sludge water and sprinking bleaching powder over surrounding area and removing surplus excavated soil near areas complete all as specified and as directed. |
| 2 | Cleaning of drain pipes by roding from manholes to manholes and well flushing with water after cleaning (length not exceeding 50 metre from manhole to manholes or septic tank) including taking off manholes cover, placing in portion the same after cleaning and removing the waste material and burying in pits to a distance exceeding 50 metre but not exceeding 100 metre complete all as specified and as directed by Engineer-in-Charge including cost of making pits and covering the same by spreading earth , for any dia of pipe. |
| 3 | Taking out old brick bats of any size from filter bed, segregating serviceable brick bats & unserviceable brick bats removing the waste materials from site and cleaning surface of serviceable brick bats by flushing with water , keeping aside serviceable brick bats for reuse complete all as specified and directed. |
| 4 | Labour only loose filling with old brick bats into the filter bed complete all as specified and directed. |
| 5 | Material & Labour only loose filling with broken brick aggregate of gauge 80 to 150 mm into the filter bed complete all as specified and directed. |
| 6 | Cleaning of water blockage from water closet to Ist manhole and disposal of waste removed from Air Force Area, complete all as directed all as directed. |
| 7 | Cleaning of blocked gully trap of any size and disposal of waste removed from Air Force Area compete all as directed all as directed. |
| 8 | Excavation in trenches not exc 1.5 mtr wide and not exc. 1.5 mtr in deep for sewage lines/manholes etc.n.exc 10 sqm on plan and getting out in any type of soil. |
| 9 | Returning filling including spreading watering and well ramming in layers n.exc 25cm thick in hard/dense soil. |
| 10 | Removing excavated soil to a distance n.exc 50m & depositing where directed at a level n.exc 1.5m above the starting point. |
| 11 | Demolition and breaking up drain pipes (salt glazed stone ware) set in cement mortar 150 mm internal dia including concrete bed & haunching if required and removing away as directed and specified. |
| 12 | Supply and fix in repairs 110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in walls or in floors including clamps all as specified and directed. |
| 13 | M & L for Plain Cement Concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in bed of drain pipes 100mm bore, laid to falls including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed by Engineer-in-Charge. |
| 14 | Supply and fix in repairs 110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in walls or in floors including clamps all as specified and directed. |
| 15 | Supply and fix in repairs 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in walls or in floors including clamps all as specified and directed. |
| 16 | S & F in repairs 110mm bore PVC (SWR) bends with access door any radius |
| 17 | S & F in repairs 75mm bore PVC (SWR) bends any radius |
| 18 | S & F in repairs 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal |
| 19 | S & F in repairs 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal |
| 20 | Supply and fix in repairs 110 mm bore, PVC (SWR) vent cowl all as specified and directed. |
| 21 | Cutting into existing manholes for connecting new drain 150mm internal dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section ) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required. |
| 22 | Demolition of reinforcement cement concrete of any description and any position not otherwise specifically provided complete all as specified. |
| 23 | Providing precast RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in cover slabs (for manholes and drains etc.), water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:6 including necessary formwork and removing of old broken cover slab complete all as specified.Note: Reinforcement shall be measured and paid for separately. |
| 24 | M&L for mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping ends and binding with and incl mild steel wire ( annealed ) not less than 0.90 mm dia or securing with clips complete all as specified. |
| 25 | Demolition of cement concrete of any description and any position not otherwise specifically provided complete all as specified. |
| 26 | M&L for providing Cement concrete 1:4:8 type D2 using 40mm graded aggregate for foundation filling and mass concreting. |
| 27 | M&L for providing cement concrete 1:3:6 type C1 using 20mm graded stone aggregate as in bed blocks/coping etc including necessary form work all as specified. |
| 28 | M&L for providing cement concrete 1:2:4 type B1 using 20mm graded agregatre as in benching inside manholes. |
| 29 | Extra for forming fair finished channel or drain 30cm inner girth in cement concrete using extra cement including mitred/stopped ends, forms mould etc, complete. |
| 30 | Dimolition of Brick/ stone / boulder masonry built in cement morter complete all as specified and directed . |
| 31 | Material and labour for stone rubble masonary built in cement mortar (1:6) except boulder complete all as specified & directed. |
| 32 | Material and labour for brickwork with subclass designation 75 , old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified & directed. |
| 33 | Taking down cement plaster on brick /stone wall surface including raking out joints, hacking for keys, scrubbing down with water, etc. complete all as specified and as directed . |
| 34 | Material and Labour for rendering 15mm thick in cement mortar (1:4) on brick work or concrete surfaces and surfaces finished even and fair complete all as specified and directed |
| 35 | Material and Labour for rendering 15mm thick in cement mortar (1:4) on on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathings and surfaces finished even and fair complete all as specified and directed |
| 36 | Material and labour for applying two coats of exterior acrylic emulsion paint of any shade in camouflage pattern over a coat of primer as approved by GE on new plastered surfaces of walls at height n. exc 10 m from average ground level (including scaffolding if required) for any bldgs/structures and the like etc including preparation of new plastered surfaces complete all as specified and directed.Bldg :- Out side plaster of Fateh Block and Boundary wall |
| 37 | Supply only Liquid water proofing compound . |
| 38 | Material and labour for providing cement concrete in foundations 1:4:8 type D2 ( using 40mm graded stone aggregate) filling and mass concrete complete all as specified & directed |
| 39 | Demolition of cement concrete unreinforced in ground floors and pavings nexc 15 cm thick (below or above ground level) complete all as specified and directed |
| 40 | Material and labour for 75mm thick PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in pavement/plinth protection , laid in bays and joints shall be filled up with bituminous gola with 80/25 bitumen ( 1 part of bitumen to be mixed with 3 part of sand and finished the surface fair and even complete all as specified & directed. |
| 41 | Taking out old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing and rubbish off the premises complete all as specified and as directed |
| 42 | Material and labour for 25 mm thick plain cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as below floor finish complete all as specified. |
| 43 | Material and labour for PCC coloured chequared cement concrete tile of size 30 cm X 30 cm X 25 mm thick as in floor , set , jointed and pointed in neat cement slurry with grey cement and pigment , laid over 20 mm thick screed bed with CM 1:6 complete all as specified and as directed . |
| 44 | Demuking of filled soil in Drain/Nallah by cutting all bushes, shrubs, sarkandas and only type of vegetation and desilting all deposit of soil and other materials to have a free flow of water and to get a uniform trapezoidal/ rectangular shape of drain and removing all spoil from MOD area to a distance exc 250m mtr but n exc 500 mtr and deposited in layer n exc 25 cm thick, cross sectional area of drain /Nallah n. exc 1.5 Sqm complete all as specified and directed. |
| 45 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thick (unreinforced) (below or above ground level) complete all as specified and as directed. |
| 46 | M&L 100 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base |
| 47 | M&L for sand (cushioning) filling under floors including watering and consolidation all as specified and as directed by Engr- in -charge. |
| 48 | M&L in repairs Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade with gray cement and pigment etc, complete all as specified and as directed by Engineer-In- Charge. |
| 49 | S&F in repairs vitreous china water closet Padestal pattern( white ) excluding fixing bolts, flushing cistern and flush pipe complete all as directed. |
| 50 | S&F in repairs vitreous china water closet (squatt pan) orrisa pattern 580x440 mm size pan white with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to 'flushing cistern/pipe complete all as specified and directed. |
| 51 | S & F in repairs cast copper alloy chromium plated fancy type central hole basin mixer with capstan head for high pressure suitable for 15mm bore pipe complete and all as specified. Cat Part No 167 of Jaquar, or equivalent approved model of Hindware/Marc |
| 52 | S&F in repairs vitreous china urinals,flat back of size 465mmX355mmX265mm,white with grating and union for discharge pipe including connecting to waste pipe complete all as specified and directed. |
| 53 | S&F in repairs 10 ltrs capacity (PVC), valve less, syphonic action type, fluhsing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed. |
| 54 | M&L in repairs 32 mm waste fittings, brass, chromium plated for glazed ware basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed to waste pipe complete all as specified and directed. |
| 55 | S&F in repairs plastic seat covers for water closet, black or any type of color,,closed pattern with flat bottom with mild steel chromium plated or alluminised hinging device. |
| 56 | S&F in repair vitreous china,white, wash hand basin, flat back size 550x400mm 'including MS brackets including cutting for and pinning in, but excluding waste pipe. |
| 57 | Supply and fixing in repairs 600mm x 450mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed of wooden plugs with CP brass screws complete all as specified and directed by Engineer-in-Charge. |
| 58 | S&F PVC cabinate mirror of size 400x 500mm approved quality fixed to wall with CP screw and cap all as directed by Engr-in-Charge.MAKE:Prayag/Nilkamal/Polytuf |
| 59 | Taking up or down steel tubing and connections including cleaning for refixing or removal to store with all fittings for 15 mm bore GI tubing. |
| 60 | Taking up or down steel tubing and connections including cleaning for refixing or removal to store with all fittings for 20 mm bore GI tubing. |
| 61 | S&F GI tubing medium grade 15mm bore dia with all fitting and fixed complete to walls and ceilings or laid in floors. |
| 62 | S&F GI tubing medium grade 20mm bore dia with all fitting and fixed complete to walls and ceilings or laid in floors. |
| 63 | S&F in repair 15 mm dia brass chromium plated pillar tap, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe all as directed. |
| 64 | S&F in repair 15 mm dia bib tap cast copper alloy (fency type), chromium plated ,'with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule all as directed. |
| 65 | S&F in repairs stop valve, cast copper alloy, with crutch or butterfly handle, screwed down both ends for high pressure, as per ISI suitable for 15mm dia iron pipe all as directed. |
| 66 | S&F in repairs 450mm long PVC connection 15mm bore with PTMT nuts. |
| 67 | S&F in repairs 20mm dia brass chromium plated tubular towel rails,D type,60cm long between flanges,complete all as specified. |
| 68 | S&F in repairs chromium plated health faucet,teliphonic type,with CP flexible arms and Jet,of approved make, suitable to fixed to 15mm bore CP angle valves, complete all as directed. |
| 69 | Supply and fix in repairs brass chromium plated shower rose 125mm size with or without swivel joints any size including fixing to steel pipe of 15mm bore all as specified and directed. |
| 70 | Supply and fix grating doom 125mm dia of PTMT (Minimum weight 40gms) all as specified and directed. |
| 71 | S&F in repair snow marker including making Base of the same with PCC 1:3:6 complete all as specified and as directed. |
| 72 | M&L for repair existing snow marker including making Base of the same with PCC 1:3:6 complete all as specified and as directed. |
| 73 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 74 | M&L Coloured glazed ceramic tiles glossy finish of size 300x450x7mm thick in dado’s/skirting etc. lais over 15 mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white cement to match the colour of tiles complete and all as specified and directed. |
| 75 | M&L for Non skid, coloured ceramic tiles of area exc 0.06 sqm and n.exc 0.11 sqm each tile , 7-8 mm thick of any colour pattern in floor laid over 15mm thick screed bed or bedding layer in cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile, etc complete all as specified and directed. |
| 76 | Dismantling structural steel work including doors , gates etc complete all as speciified and as directed . |
| 77 | Supply and fix rolled mild steel Fe-290 (grade E-165) framed work as in doors or gates of angle or other section with gusset plate , rails , braces etc complete drilled for fixing of steel sheeting or other covering . Doors etc to be prepared for hanging or sliding with and including either hook and hinges or steel hanging door fittings complete all as specified and as directed . |
| 78 | Dismantling wrought iron or mild steel work of any description fixed in any position not otherwise provided for complete all as specified and as directed . |
| 79 | Supply and fix rolled mild stee framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed . |
| 80 | Supply and fix in repair punched type concertina coil of dia 500 mm and pitch 150 mm made up of 2.60 mm HTGS spring core wire having tensile strength of 1600 N/Sqmm and each concertina coil shall be of min 50 turns and 5 clips in two turns i.e 125 clips per coil ( wt of coil 7 kg to be streched upto 3.25 RM i.e 2.15 kg per RM ) complete all as specified and directed . |
| 81 | Material and labour for Welding in repair exc 2.5cm but n exc 5cm in length of metal thickness exceeding 9 mm and n.exceeding 20 mm including cleaning and preparing the surfaces to be welded together, holding the members in true position while welding complete all as specified and as directed . |
| 82 | Excavating in post holes (or similar holes) in hard/dense soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and as directed . |
| 83 | Dismantling post or struts of RCC, Steel or other section, including taking out embedded portion in concrete and making good disturbed ground complete all as specified and as directed |
| 84 | Material and labour for plain Cement Concrete 1:4:8 type D2 using 40mm graded stone aggregate in foundation filling around the fencing post, complete all as specified and directed. |
| 85 | S&F mild steel angle iron as in fencing posts and struts including cutting tops to shape as directed drilling holes notching of wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or revieting, welding at corners etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 86 | Supply only Chain link MS galvanised fencing , any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed. |
| 87 | Fixing only in repair chain link fencing including line wires any mesh, size and type to any type of standards rails straining bolts etc including provision of binding wire complete all as specified and as directed. |
| 88 | S&F Mild steel screw bolts 11 to 15 mm dia of neck (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10 cm and n.exc 15 cm long. complete all as specified and as directed. |
| 89 | Supply & fix only 10 mm dia and over, Ms round bar as in line wire conforming to Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde -E-165) for fixing of chain link fencing complete all as specified and as directed. |
| 90 | Supply and fix in repair galvanized, 2 strand,steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type or standard rails, straining bolts, including, securing or tying at crossings with and provn of galvanized mild steel wire,staples or steel pins etc complete all as specified directed Note : Each line wire to be measured and paid separately. |
| 91 | M&L for applying two coat of synthetic enamal paint over a coat of red oxide zinc chrome primer on new steel surface of n.exc 10 cm width / girth including preparation of surface complete all as specified and directed. |
| 92 | Material and Labour applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel surface exc 10 cm width or girth complete all as specified and as directed . Please Enable Macros to View BoQ information |
