|
| 1 | Taking down copper / aluminium point wiring (light, fan, socket or power) complete, removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. including making good the disturbed surfaces complete all as specified and as directed. |
| 2 | M&L concealed point wiring complete with 1.5 Sqmm 02 run x single core multistranded copper conductor of 1100 volts grade PVC insulated FRLSH and sheathed (cable colour for phase and neutral approved code as per IS) includling in heavy duty rigid not metalic PVC conduit not less than 20mm dai with all PVC accessories such as Tee,bend, collar elbow juction boxes etc fixed concealed in wall includling chaising, cutting and making good surface as per existing and suitable accessories including suitbale size of modular flush box, cover plate with frame and required accessories for fixing of modular switches, socket etc including 1.5 sqmm PVC isulated FRLSH copper earth continuity conductor to common earth and connected to earth dolly complete all as specified and directed for following :- |
| 3 | One light point /fan point controled by one-way switch. |
| 4 | Point wiring for one 5 amps socket outlets on independent board controlled by one-way switch. |
| 5 | Point wiring for one 5 amps socket outlets on same board controlled by one-way switch. |
| 6 | All as per items no-2 above but for Point wiring for one 15 amps socket outlets on independent board controlled by one-way switch with 2.5 Sqmm 02 run x single core multistranded cooper conductor of 1100 volts grade PVC insulated FRLSH for phase and neutral and unsheathed cable includling 2.5 Sqmm PVC insulated FRLSH copper earth continuity conductor to common earth and connected to earth doly complete all as specified and as directed. |
| 7 | M&L point wiring complete with 1.5 Sqmm 02x single core multistranded cooper conductor of 1100 volts grade PVC insulated FRLSH and sheathed(cable colour for phase and neutral approved code as per IS) includling PVC caping & casing with all PVC accessories such as Tee,bend, collar elbow juction boxes etc fixed the wall includling suitbale size of modular flush box, cover plate with frame and required accessories for fixing of modular switches, socket,regulator etc including 1.5 sqmm etc including 1.5 sqmm PVC isulated FRLSH copper earth continuity conductor to common earth and connected to earth dolly complete all as specified and directed for following :- |
| 8 | One light point /fan point/bell point controled by one-way switch. |
| 9 | Point wiring for one 5 amps socket outlets on same board controlled by one-way switch. |
| 10 | Point wiring for one 5 amps socket outlets on independent board controlled by one-way switch. |
| 11 | All as per items no-4 above but for Point wiring for one 15 amps socket outlets on independent board controlled by one-way switch with 2.5 Sqmm 02x single core multistranded cooper conductor of 1100 volts grade PVC insulated FRLSH for phase and neutral and unsheathed cable includling 2.5 Sqmm PVC insulated FRLSH copper earth continuity conductor to common earth and connected to earth doly complete all as specified and as directed. |
| 12 | Supply and fixing in repair of Modular switch 1 way 6A, 1 module |
| 13 | Supply and fixing in repair of Modular Fan step regulator, 120W - 2 module |
| 14 | Supply and fixing in repair of Modular Socket, 6A - 2/3 pin combined 2 module. |
| 15 | Supply and fixing in repair of Modular Socket 6A/16A - 2/3 pin combined 2 module. |
| 16 | Supply and fixing in repair of Modular switch 1 way 16A, 1 module |
| 17 | Supply and fixing in repair of Modular Bell push 6A 1 module |
| 18 | Supply and fixing in repair of modular white cover plate with frame 6 to 8 module |
| 19 | Supply and fixing in repair of modular white cover plate with frame 2 to 4 module |
| 20 | Supply and fixing in repair of Modular PVC Flush box 1/2 to 4 module. |
| 21 | Supply and fixing in repair of Modular PVC Flush box 6 to 8 module. |
| 22 | M&L point wiring complete with 1.5 Sqmm 02x single core multistranded cooper conductor of 1100 volts grade PVC insulated FRLSH and sheathed(cable colour for phase and nuetral approved code as per IS) includling PVC caping & casing with all PVC accessories such as Tee,bend, collar elbow juction boxes etc fixed the wall includling suitable size of heavy SS sunken box of reqd size with 3mm thick PVC laminated sheet for fixing of flush type switches, socket, regulator etc including 1.5 sqmm etc including 1.5 sqmm PVC isulated FRLSH copper earth continuity conductor to common earth and connected to earth dolly complete all as specified and directed for following :- |
| 23 | One light point /fan point/bell point controled by one-way switch. |
| 24 | Point wiring for one 5 amps socket outlets on same board controlled by one-way switch. |
| 25 | Point wiring for one 5 amps socket outlets on independent board controlled by one-way switch. |
| 26 | All as per items no-16 above but for Point wiring for one 15 amps socket outlets on independent board controlled by one-way switch with 2.5 Sqmm 02x single core multistranded cooper conductor of 1100 volts grade PVC insulated FRLSH for phase and nuetral and unsheathed cable includling 2.5 Sqmm PVC insulated FRLSH copper earth continuity conductor to common earth and connected to earth doly complete all as specified and as directed. |
| 27 | Supply and fixing in repair of Switch piano, flush type single pole, one way 5 Amp including connection complete. |
| 28 | Supply and fixing in repair of Socket outlet 3 pin, 5A, flush type. |
| 29 | Supply and fixing in repair of Bell push, flush type, 5 amp 240 volts AC. |
| 30 | Supply and fixing in repair of Buzzer, Ding Dong AC. 230 volts, single pole complete including connection complete. |
| 31 | Supply and fixing in repair of stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd. |
| 32 | Supply and fixing in repair of switch 16 Amps flush type including connection complete. |
| 33 | Supply & Fixing in repair Socket outlet 3/5 pin, 16A, flush type including connction complete |
| 34 | Supply and fixing in repair of switch and socket combined 5A/16A, 5 in 1 flush type as per specified. |
| 35 | Supply and fixing in repair of switch and socket combined 3 pin, 5A flush type universal as per specified. |
| 36 | Supply and fixing in repair of switch and socket combined 3 pin, 16A flush type universal as per specified. |
| 37 | Supply and fixing in repair of in Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body. |
| 38 | Supply and fixing in repair of 6A Plug Top 3 pin polycarbonate as per specified and directed by engg-in charge.. |
| 39 | Supply and fixing in repair of 16A Plug Top 3 pin polycarbonate as per specified and directed by engg-in charge.. |
| 40 | Supply and fixing in repair of metal plug 20A, 3 pin as per specified and directed by engg-in charge.. |
| 41 | Supply and fixing in repair of lamp holder all as per specified. |
| 42 | Supply and fixing in repair of MCCB DB of 415 Volts, 4 way, with double door sheet metal enclosure for fixing TPN DB-VTPN as per IEC 61439-3 and reversible Door for IP 43 & 54 with 250 Amps rated copper busbar for each phase with 2 neutral busbar, 2 earthbar with provision for MCCB as incomer (without MCCB ) and provn for SP/TP MCBs as outgoing(without MCBs) on flush to the wall including making hole in the wall and fixing the DB including cement work and plastering complete all as directed |
| 43 | Supply and fixing in repair MCCB DB of 415 Volts, 8 way, with double door sheet metal enclosure for fixing TPN DB-VTPN as per IEC 61439-3 and reversible Door for IP 43 & 54 with 250 Amps rated copper busbar for each phase with 2 neutral busbar, 2 earthbar with provision for MCCB as incomer (without MCCB ) and provn for SP/TP MCBs as outgoing(without MCBs) on flush to the wall including making hole in the wall and fixing the DB including cement work and plastering complete all as directed |
| 44 | Supply and fixing in repair of sheet metal enclosure for fixing MCBs TPN with 200 Amps rated neutral busbar 415 Volts, 4 way, with double door fixed on flush to the wall including making hole in the wall and fixing the DB including cement work and plastering complete all as directed. |
| 45 | Supply & fixing in repair of sheet metal enclosures for fixing MCBs Single pole and neutral 8 way, 240 volts with 200 Amps rated bus bar withe double door fixed on flush to the wall including making the hole in the wall and fixing thee DB including cement work and plastering complete all as directed. |
| 46 | Supply and fixing in repair of Sheet metal enclosures for fixing MCBs Single pole and neutral 12 way, 240 volts with 200 Amps rated bus bar withe double door fixed on flush to the wall including making the hole in the wall and fixing thee DB including cement work and plastering complete all as directed. |
| 47 | Supply and fixing in repair of Sheet metal enclosures for fixing MCBs Single pole and neutral 4 way, 240 volts with 200 Amps rated bus bar withe double door fixed on flush to the wall including making the hole in the wall and fixing thee DB including cement work and plastering complete all as directed. |
| 48 | Supply and fixing in repair of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20Amp/25AMP complete all as specified. |
| 49 | Supply and fix in repair of Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB 63 amp |
| 50 | Supply and fixing in repair of MCB triple pole and neutral , 'C' Curve type capacity 63 Amps,10 KA, & 415 V. |
| 51 | Supply and fixing in repair of MCBs single pole and neutral, 'C' Curve type capacity 40 Amps ,10KA & 240 Volts. |
| 52 | Supply and fixing in repair of MCB single pole, 'C' curve type capacity 6 to 32 Amps capacity. |
| 53 | Supply and fixing in repair of MCCB triple pole and neutral , DPX3 thermal magnetic capacity of 63 Amps,415 V , 4 pole and 10KA Short Circuit Breaking Capacity. |
| 54 | Supply and fixing in repair of MCCB triple pole and neutral , DPX3 thermal magnetic capacity of 100 Amps,415 V and 16KA Short Circuit Breaking Capacity. |
| 55 | Supply and fixing in repair of MCCB triple pole and neutral , DPX3 thermal magnetic capacity of 125 Amps,415 V and 16KA Short Circuit Breaking Capacity. |
| 56 | Supply and fixing in repair of RCBOs double pole 30mA, rating 32A FOR EARTH LEAKAGE, OVERLOAD & SHORT- CIRCUIT PROTECTION with enclosure all as specified and directed by Engg-in-charge |
| 57 | Taking down carefully old sub main wiring including conduit and all accessories along with removing to and making good disturbed surfaces complete all as specified and directed. |
| 58 | Material & Labour for sub main wiring with 2 run single core multistranded copper conductor cable, of size 2.5 Sqmm each, PVC insulated, unsheathed, fire retardant, low smoke Halogen (FRLS-H) drawn through and including rigid non metallic PVC conduit/Casing Caping of size not less than 20mm with all necessary fitting and including one run single core multistranded copper conductor cable, of size 2.50 Sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire, fixed on wall / ceiling complete.Note: 2 Runs of main cable, one run earth wire and rigid non metallic PVC conduit/casing caping will be measured as one running meter for payment |
| 59 | Material & Labour for sub main wiring with 2 run single core multistranded copper conductor cable, of size 4.0 Sqmm each, PVC insulated, unsheathed, fire retardant, low smoke Halogen (FRLS-H) drawn through and including rigid non metallic PVC conduit /casing caping of size not less than 25mm with all necessary fitting and including one run single core multistranded copper conductor cable, of size 4.00 Sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire, fixed on wall / ceiling complete.Note: 2 Runs of main cable, one run earth wire and rigid non metallic PVC conduit/casing caping will be measured as one running meter for payment |
| 60 | Material & Labour for sub main wiring with 2 run single core multistranded copper conductor cable, of size 6.0 Sqmm each, PVC insulated, unsheathed, fire retardant, low smoke Halogen (FRLS-H) drawn through and including rigid non metallic PVC conduit /casing caping of size not less than 25mm with all necessary fitting and including one run single core multistranded copper conductor cable, of size 6.00 Sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire, fixed on wall / ceiling complete.Note: 2 Runs of main cable, one run earth wire and rigid non metallic PVC conduit/casing caping will be measured as one running meter for payment |
| 61 | Material & Labour for sub main wiring with 2 run single core multistranded copper conductor cable, of size 10.0 Sqmm each, PVC insulated, unsheathed, fire retardant, low smoke Halogen (FRLS-H) drawn through and including rigid non metallic PVC conduit /casing caping of size not less than 25mm with all necessary fitting and including one run single core multistranded copper conductor cable, of size 10.00 Sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire, fixed on wall / ceiling complete.Note: 2 Runs of main cable, one run earth wire and rigid non metallic PVC conduit/casing caping will be measured as one running meter for payment |
| 62 | Material & Labour for sub main wiring with 4 run single core multistranded copper conductor cable, of size 6.0 Sqmm each, PVC insulated, unsheathed, fire retardant, low smoke Halogen (FRLS-H) drawn through and including rigid non metallic PVC conduitcasing caping of size not less than 32mm with all necessary fitting and including one run single core multistranded copper conductor cable, of size 6.00 Sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire, fixed on wall / ceiling complete.Note: 4 Runs of main cable, one run earth wire and rigid non metallic PVC conduit/casing caping will be measured as one running meter for payment |
| 63 | S&F in repair of LED Street Light fitting 30 Watt, system efficiency not less than 100 lumen / watt, IP65/66 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws, fixed on existing bracket & connecting complete all as directed complete. |
| 64 | S&F in repair of LED Street Light fitting 45/50 Watt, system efficiency not less than 100 lumen / watt, IP65/66 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws, fixed on existing bracket & connecting complete all as directed complete. |
| 65 | Supply and fixing in repair of round shape 3/4 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete |
| 66 | Supply and fixing in repair of round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete |
| 67 | Supply and fixing in repair round /square shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete |
| 68 | Supply and fixing in repair of round/ square shape 18 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete |
| 69 | Supply and fixing in repair of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 70 | Supply and fixing in repair of energy efficient decorative ultra slim LED tube light fitting with built in LED & integral LED driver 22 watt, polycarbonate body extruded channel (approximate length 1200 mm) housing & diffuser with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engg –in-charge. |
| 71 | Supply and fixing in repair of Energy efficient recessed mounted 36 watt LED luminaries (lumen efficiency not less than 120 Lumen / watt) suitable for 600 x 600 mm grid ceiling along with flat diffuser along with constant current electronic driver all as specified and directed by Engg-in-charge |
| 72 | Supply and fixing in repair of LED flood Light fitting 70 Watt, system efficiency not less than 100 lumen / watt, IP65/66 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws fixed on existing bracket & connecting, complete. |
| 73 | Supply and fixing in repair of LED flood Light fitting 120 Watt, system efficiency not less than 100 lumen / watt, IP65/66 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws fixed on existing bracket & connecting, complete. |
| 74 | Supply and fixing in repair of round shape Spot LED light 4 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete |
| 75 | S&F in repairs LED of 18 watt surface mounted made of extruded aluminium housing and high power led as a light source with clear diffuser and separate electronic driver fixed in position & connecting complete all as specified and directed. |
| 76 | Supply and fixing in repair of round shape LED Zoom light 18 watt 220 volts AC recess mounted adjustable led downlights and high power led as a light source with clear diffuser and separate electronic driver fixed in position & connecting complete all as specified and directed. |
| 77 | Supply and fixing in repair of PVC caping casing 32mm as per specified and directed. |
| 78 | Supply and fixing in repair of PVC Flexible conduiit 32mm as per specified and directed. |
| 79 | Supply and fixing in repair of Rigid non-metallicPVC conduit 32mm dai exclusive of boxes (junction/terminal) but inclusive of all tees, bends,elbows, reducers, bellmouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.as per specified and directed. |
| 80 | Supply and fixing in repair of LED Aviation obstruction light fitting die cast aluminium alloy housing, heat resistant, clear thick glass and accessories with LED chip & driver, fixed in position & connecting complete. |
| 81 | Supply and fixing in repair of PVC insulated, 3 core 1.5 Sqmm round sheathed copper conductor(flexible) industrial cable fire retardant all as specified and directed. |
| 82 | Supply and fixing in repair of PVC insulated, 3 core 2.5 Sqmm round sheathed copper conductor(flexible) industrial cable fire retardant all as specified and directed. |
| 83 | Taking down carefully ceiling fan / exhaust fan / pedestal fan / wall mounted fan by disconnecting electric connection for carrying out repairing such as rewinding, replacement of defective spare part, over hauling and painting etc as required and re-fixing in the same position after carry out the repairs works, and connecting complete all as directed by Engr-in-Charge. Note:- Repairing such as rewinding, replacement of defective spare part, connecting wire,Over hauling and painting etc will be measured & paid separately under subsequent items. |
| 84 | Supply and fixing ceiling fans complete with blades,electronic regulator and accessories 230V 1200 mm sweep, min air delivery 210 CFM with serive value 6.00 BEE. Five star rated wih brushless direct current motor (BLDC) including connection with copper wire from ceiling rose to fan all as specified & directed.Note- Old U/s ceiling fan to be deposited in MES E/M store yard. |
| 85 | (a) 1200mm sweep |
| 86 | (b) 1400 mm sweep |
| 87 | M & L for rewinding of exhaust fan motor of any make by dismantling the exhaust fan,removing shaft ,bearing and bushing, removing the burnt copper winding from the slots, cleaning slot, replacement of defective nut bolts washer etc and rewinding of fan motor using appropriate gauge/size super enameled copper winding wire thermal class-E, including varnishing ,applying cotton tape and reassembling complete and testing of fan complete all as directed by the Engineer-in-Charge.Rewinding should be carried out for the following size of exhaust fan :- |
| 88 | 450mm sweep |
| 89 | 200/250/300mm sweep |
| 90 | M & L for rewinding of flame proof exahust fan/ceiling fan motor of any make by dismantling ,removing shaft ,bearing and bushing, removing the burnt copper winding from the slots, cleaning slot, replacement of defective nut bolts washer etc and rewinding of fan motor using appropriate gauge/size super enameled copper winding wire thermal class-E, including varnishing ,applying cotton tape and reassembling complete and testing of fan complete all as directed by the Engineer-in-Charge.Rewinding should be carried out for the following size of exhaust fan :- |
| 91 | 450mm sweep |
| 92 | 300mm sweep |
| 93 | Rewinding of flame proof ceiling fan 1200mm |
| 94 | M & L for rewinding of Air circulator/Pedestal fan/wall fan motor of any make by dismantling the Pedestal fan,removing shaft ,bearing and bushing, removing the burnt copper winding from the slots, cleaning slot, replacement of defective nut bolts washer etc and rewinding of fan motor using appropriate gauge/size super enameled copper winding wire thermal class-E, including varnishing ,applying cotton tape and reassembling complete.Testing of fan should be carried out to entire satisfaction of Engr-in-charge. The size of pedestal fan for rewinding shall be as under |
| 95 | 300 mm sweep. |
| 96 | 450 mm sweep. |
| 97 | 600 mm sweep. |
| 98 | Supply and fixing in repair of ball bearing of any size suitable for ceiling fan 1200 mm / 1400 mm sweep complete. |
| 99 | Supply and fixing in repair of capacitor 2.5 MFD AC 230 Volt 50 HZ, for ceiling fans. |
| 100 | Supply and fixing in repair of capacitor 4 MFD AC 230 Volt 50 HZ, of exhaust / bracket fan any size. |
| 101 | Supply and fixing in repair of bolt, nuts, washer and split pin for the down rod of ceiling fan. |
| 102 | Supply and fixing in repair of frame including rubber bush and all accessories suitable for 300mm exhaust fan of any make complete. |
| 103 | Supply and fixing in repair of frame including rubber bush and all accessories suitable for 450mm exhaust fan of any make complete. |
| 104 | Supply and fixing in repair of PVC canopy set(upper & lower) for ceiling fans of any sweep and make and fixing in position. |
| 105 | Supply and fixing in repair of blades of ceiling fan of any sweep & make complete. |
| 106 | Supply and fixing in repair of down rod of MS having 15mm dia and length 600mm all as specified and directed by Engineer in charge |
| 107 | Supply and fixing in repair of blades of exhaust fan 450/300 mm of any make complete. |
| 108 | Supply & fix in replacement of exhaust fans plastic body AC single phase 230/ 240 V of size 300 mm sweep with louver all as specified and directed by Engineer in charge. |
| 109 | Supply & fixing in replacement of exhaust fans plastic body AC single phase 230/ 240 V of size 200/150 mm sweep with louver all as specified and directed by Engineer in charge. |
| 110 | Supply & fixing in replacement of exhaust fans plastic body AC single phase 230/ 240 V of size 250 mm sweep with louver all as specified and directed by Engineer in charge. |
| 111 | Supply and fixing in repair of PVC rectangular block for mounting, switches, sockets,fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 200 mm x 150 mm and 50 mm deep with cutting as per directed by engg-in charge. |
| 112 | S&F in replacement of mounting bracket for security light fittings made out of GI pipe light grade 40 mm dia upto 1.5 m length bent to shape incl fixing arrangement with neccassary clamps, bolts, nuts, washers etc . |
| 113 | Supply and fixing in repair of LED high bay light fitting 150 Watt, system efficiency not less than 100 lumen / watt, IP65/66 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws including strud rod dia not less than 20mm with all necessory accessories as anchor fastner,nut bolt washer etc & connecting, complete. |
| 114 | Supply and fixing in replacement of heating element 1.5/2KW for geyser as per directed by engg-in charge. |
| 115 | Supply and fixing in replacement of thermostate for geyser as per directed by engg-in charge. Please Enable Macros to View BoQ information |
| 116 | Supply and fixing in replacement of thermostate for geyser as per directed by engg-in charge. Please Enable Macros to View BoQ information |
