Tender For Repair/ Replacement Of Ber Ceiling Fans In Certain Otm Accn & Offrs, Jcos, Ors Md Accn And Other Sanction Work Under Ge(South) Udh Ur
Tender Value
Ref. Documents
Estimated cost
Bid Submission
07 Jul 2026
5 days left
EMD
98500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
GE SOUTH UDHAMPUR → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Replacement Of Ber Ceiling Fans In Certain Otm Accn & Offrs, Jcos, Ors Md Accn And Other Sanction Work Under Ge(South) Udh Ur
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 19-Jun-2026 | REVISED BOQ | BOQ | 30-Jun-2026 |
| 2 | 30-Jun-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 07-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: MILITARY ENGINEERING SERVICES (GE (SOUTH) UDHAMPUR) NAME OF WORK : REPAIR/ REPLACEMENT OF BER CEILING FANS IN CERTAIN OTM ACCN & OFFRS, JCOS, ORS MD ACCN AND OTHER SANCTION WORK UNDER GE(SOUTH) UDHAMPUR Contract No:GE/S(U)-66/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Dismantling asbestos cement/galvalume sheet/CGI (corrugated , semi corrugated etc) sheets as in roof covering. |
| 3 | Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water. |
| 4 | Demolition of cement concrete of any description and in any position not otherwise specifically provided. |
| 5 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed by Engr-in-charge. |
| 6 | Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil etc complete all as specified directed by Engrt-in-charge. |
| 7 | Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sqm on plan and getting out in soft/loose soil, complete all as specified and directed by Engr-in-charge. |
| 8 | Returning filling in including spreading levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and as directed by Engr-in-charge . |
| 9 | Removing excavated material n exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed by Engr-in-charge. |
| 10 | M&L PCC 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation complete all as specified and directed by Engr-in-charge. |
| 11 | M&L for RCC M-25 (20mm graded aggregate) as in foundations footings, plinth beams etc all as specified and directed by Engr-in-charge. |
| 12 | M&L for RCC M-25 (20mm graded aggregate) as in columns, pillars etc all as specified and directed by Engr-in-charge. |
| 13 | M&L for RCC M-25 (20mm graded aggregate) as in beams, lintels etc all as specified and directed by Engr-in-charge. |
| 14 | M&L for RCC M-25 (20mm graded aggregate) as in chajjas etc all as specified and directed by Engr-in-charge. |
| 15 | M&L for RCC M-25 (20mm graded aggregate) as in slab type Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-charge. |
| 16 | S&F TMT bars upto 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engr-in-charge. |
| 17 | S&F TMT bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders bent to shape required, including binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engr-in-charge. |
| 18 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed by Engr-in-charge. |
| 19 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed by Engr-in-charge. |
| 20 | Form work to soffit of suspended slabs such as roof slabs, floor slabs, landings and similar work, n exc 200mm thick (horizontal or sloping) complete all as specified and directed by Engr-in-charge. |
| 21 | M & L formwork to sides and soffits of floor or roof beams, beam haunching's, girders, bressummers, lintes,cantilevers, shelves including supports, overhangs, etc also splays between floors and beams finished rough surfaces of concrete complete all as specified and directed by Engr-in-charge. |
| 22 | Formwork to chajjas, chullah hoods, similar items including edges all as specified and directed Engr-in-charge.. |
| 23 | M & L form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide complete all as specified and directed by Engr-in-charge. |
| 24 | M&L brick work with sub class B bricks, straight or curved on plan exc 6 m mean radium built in CM 1:6 all as specified and directed by Engr-in-charge. |
| 25 | M & L hardcore of broken stone or boulders of gauge exc. 63mm but n exc 100mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and well rammed to a true surface. |
| 26 | M&L 75 mm thick PCC 1:3:6 type C2 using 40 mm graded aggregate as in sub base complete all as specified and directed by Engr-in-charge. |
| 27 | M & L for Vitrified tiles light Shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-charge. |
| 28 | M & L for Vitrified tiles light Shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36sqm, in vertical surfaces of skirting/dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed by Engr-in-charge. |
| 29 | M & L 75 mm the PCC 1:3:6 type C-2 as plinth protection, finished even and fair without using extra cement all as specified and directed by Engr-in-charge. |
| 30 | S&F 125x60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed by Engr-in-charge. |
| 31 | S & F 35mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engr-in-charge. |
| 32 | M&L for Almirah/cabinet/cupboard/modular kitchen in required size at site made out 18 mm thick one side decorative lamination sheet/sunmica consisting of carcass 18/20 mm thick PVC sheet & provn of shutters made out of 18mm thick one side decoartive laminated PVC sheet all reqrired brackets SS screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edbes shall be covered with 2 mm thick edge bonding tape or 90 degree edge bent finish, necessary drawer, openable shelve with frame work complete as per make and specification mention as per drawing with locking arragement approved by Engr-in-Charge. (Make: Rajshree/Sintex or equilent) Complete all as specified and directed by Engr-in-charge. |
| 33 | S&F PVC steel catcher of superior quality all as specified and directed by Engr-in-charge |
| 34 | S & F Hettich soft closer hinges of stainless steel premium quality complete all as specified and directed by Engr-in-charge. |
| 35 | Supply only Stainless steel basket (plain), SS plate basket(11-13 division), SS partition basket, SS Cutlery basket, SS grid basket of size as per manufacturer/ as specified and directed by Engr-in-Charge made of 4mm the S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved make Make: Life style Cat part No WA/POB/15204 or equivalent approved |
| 36 | S&F 100mm Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodized and fixed type B-21 |
| 37 | S&F continuous ( piano ) hinges , width of flaps (when open ) 40mm mild steel bright finish or electro galvanised complete all as specified and directed by Engr-in-charge. |
| 38 | Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sqm on plan and getting out in soft/loose soil, complete all as specified and directed by Engr-in-charge |
| 39 | S & F 150mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed by Engr-in-charge. |
| 40 | S & F 150mm Brass handles, cast type, polished bright complete all as specified and directed by Engr-in-charge. |
| 41 | S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm |
| 42 | S&F Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engr-in-charge. |
| 43 | S&F PVC connection 15 mm dia and 600mm long with two Nos of brass check nuts and washers complete all as specified and directed by Engr-in-charge. |
| 44 | S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engr-in-charge. |
| 45 | S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed by Engr-in-charge |
| 46 | S&F 75mm PVC (SWR) floor trap, plain with grating includingjointing with solvent cement complete all as specified and directed by Engr-in-charge. |
| 47 | M & L for 1000 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed by Engr-in-charge. |
| 48 | S&F 15 mm dia Bib tap fancy type cast copper alloy with crutch or butterfly handle, screwed down , screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-charge. |
| 49 | S&F galvanized steel tubing, 20mm bore, medium grade including all fittings and short pieces, fixed complete to walls and ceiling or laid in floors, complete all specified and directed by Engr-in-charge. |
| 50 | S&F galvanized steel tubing, 15mm bore, medium grade including all fittings and short pieces, fixed complete to walls and ceiling or laid in floors, complete all as specified and directed by Engr-in-charge. |
| 51 | S & F of gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends for iron pipe of size 20mm bore complete all as specified and directed by Engr-in-charge. |
| 52 | S&F 15mm dia stop valves fancy type chromium plated with long shank and cup (concealed type) , screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed by Engr-in-charge. |
| 53 | S&F 100mm size butt hinges extruded aluminium alloy with galvanised with galvanised mild steel hinges pin anodisedtype B-22 complete all as specified and as directed by Engr-in-charge. |
| 54 | S&F 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engr-in-charge |
| 55 | S&F aluminium handles cast type of 150mm size complete all as specified and directed by Engr-in-charge. |
| 56 | S&F for ISI marked 250mm long aluminium alloy, anodized sliding bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloys to door shutter complete all as specified and directed by Engr-in-charge. |
| 57 | S&F steel window (box type) factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all specified and directed by Engr-in-charge.Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately. |
| 58 | S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube suppling and fixing in opening as per specification & drawing complete all specified and directed by Engr-in-charge.. |
| 59 | S & F factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site as per specification & drawing complete all specified and directed by Engr-in-charge. |
| 60 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all specified and directed by Engr-in-charge.. |
| 61 | M&L rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces & finishing the surface fair and even without using extra cement complete all specified and directed by Engr-in-charge. |
| 62 | M&L rendering 10mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces & finishing the surface fair and even without using extra cement complete all specified and directed by Engr-in-charge. |
| 63 | M&L Rendering 5mm thick on concrete surfaces in CM 1:3 as on ceiling all specified and directed by Engr-in-charge. |
| 64 | M&L for APP polymeric water proofing membrane minimum 3mm thick and weighting not less than 3.6 kg / sqm of make 'Moply FP' manufactured by STP Texsa Ltd or' Hyper Plas' ( polyester) manufactured by M/S IWL Ltd or'Shaliplas' (polyester) manufactured by M/S Capital Steels and chemicals Pvt Ltd or 'Mak polyplast' manufactured by M/S M K Petro as approved by GE , black finished reinforced with non woven polyester matt, with fusible finish laid over compatible bitumen primer at the rate of 0.40 Ltr/Sqm torching overlaps with a propane or a butane gas torch, with a over lap of 75mm at the sides and100 at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacture's instructions including 0.40 Ltr/Sqm torching overlaps with a propane or a butane gas torch, with a over lap of 75mm at the sides and100 at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacture's instructions including preparation of surface, complete all specified and directed by Engr-in-charge.. Note : the water proofing treatment shall be carried out by the manufacturer or their authorised applicators. |
| 65 | M & L 18-20 mm thick granite (of any type) work( table rubbed and polished) in steps, jambs, pillars, window sills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab complete all specified and directed by Engr-in-charge. |
| 66 | S&F rolled mild steel Fe-410w (Gde-E-250) quality 'B' Roof trusses (framed ) , trussed, purlins, crane gantries , rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces cleats etc completeall specified and directed by Engr-in-charge. |
| 67 | S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe .290.Gde-E-165 complete all specified and directed by Engr-in-charge. |
| 68 | S&F Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all specified and directed by Engr-in-charge. |
| 69 | M&L for plain cement concrete1:2:4 type B-2 using 40 mm graded stone aggregate as in channels and drains, foundation and similar work etc complete all specified and directed by Engr-in-charge. |
| 70 | S&F in repair Vanity type vitreous chinaware wash hand basin (WHB) white size 550mm x 400mm complete including 32 mm dia chromium plated waste coupling, PVC waste pipe and cutting for pinning in ends of brackets in wall, PVC/HDMR countershelf below the wash basin complete all specified and directed by Engr-in-charge. |
| 71 | S&F Water closet single piece/wall hanged pattern coloured of size 535 x 380 x 400 mm as approved and complete all as specified and directed by Engr-in-Charge .Make : Jaquar Cat part No KUS-WHT-35851S300UF or equivalent in Hindware/Cera |
| 72 | S&F Anodised aluminium window and ventilator shutters, side hung type without sash bar aluminium section weighing 0.55 kg/m including necessary joining cleat, glazing clips, rubber packing , anodised aluminium snap beading screws , anodised aluminium fitting such as peg stays 150mm long (1 no) hinges type B-12 100mm long (2 no ) suitable handle (1 no) etc complete all specified and directed by Engr-in-charge. |
| 73 | S&F Vitrified Dura stone tiles of size not exc 0.36 Sqm of 15mm thick as in floors and over & including 15mm thick screed bed or bedding layer in cement mortar 1:4, including jointed with neat cement slurry and pointed in coloured cement to match the surface of tiles, complete all specified and directed by Engr-in-charge. |
| 74 | M&L PCC 1:2:4 type B0 (12.5mm graded aggregate) as in coping, benching and similar work etc including necessary form work complete all specified and directed by Engr-in-charge. |
| 75 | M & L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM (1:4) as in drain, walls and similar work etc complete all specified and directed by Engr-in-charge. |
| 76 | M&L 1mm thick wall care putty on wall complete all specified and directed by Engr-in-charge. |
| 77 | M&L for two or more coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all specified and directed by Engr-in-charge. |
| 78 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all specified and directed by Engr-in-charge.. |
| 79 | M & L for non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all specified and directed by Engr-in-charge. |
| 80 | M & L for Glazed Coloured Ceramic tiles in vertical surface 300x450x7mm thick laid over 10 mm thick screed bed in CM 1:4,set and joint in neat cement slurry and pointed in white or colour cement to match complete all specified and directed by Engr-in-charge. |
| 81 | M & L Rendering 15 mm thick on brick or concrete surfaces of walls in CM (1:4) including finishing the surfaces fair and even without using extra cement all specified and directed by Engr-in-charge. |
| 82 | M & L Rendering 10 mm thick on brick or concrete surfaces of walls in CM (1:6) including finishing the surfaces fair and even without using extra cement all specified and directed by Engr-in-charge. |
| 83 | S&F 5 mm thick looking mirror of required size, fixed on walls with dash fasteners and chromium plated screws purposefully made to fix the glass by drilling hole in the glass complete all specified and directed by Engr-in-charge. |
| 84 | S&F Water closet single piece pattern coloured of size 370x695x795 mm as approved and complete all as specified and directed by Engr-in-Charge . Make : Jaquar Cat part No KUS-WHT-35851S300UF or equivalent in Hindware/Cera |
| 85 | S&F 15 mm dia Angle valves/ stop cock, fancy type and chromium plated screwed down high-pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all specified and directed by Engr-in-charge.. Make - Jaquar Cat No KUP-35053PM or equivalent in Hindware/Cera |
| 86 | S&F Vitreous china half stall urinal (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 , securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement fixing flush Pipe, grating & union for discharge Pipe complete all specified and directed by Engr-in-charge. |
| 87 | S&F Concussive push button taps of cast copper alloy, screwed for iron pipe and fixed complete all specified and directed by Engr-in-charge. |
| 88 | S&F urinal spreader of CP for fixing with 15mm dia pipe (minimum weight 60 gms) complete all specified and directed by Engr-in-charge. |
| 89 | S&F Health faucet ABS body with wall hook and 1 mtr chrome plated PVC hose pipe complete all as specified and directed. Make : Jaquar and equivalent . |
| 90 | S&F chromium plated toilet paper holder complete all as specified and directed. Make : Jaquar Cat Part No ACN 1153N and equivalent in CERA. |
| 91 | S&F 600 mm long brass chromium plated towel rail fancy type complete all as specified and directed. Make : Jaquar Cat Part No ACN-1111NM and equivalent in CERA. |
| 92 | S&F soap dish complete all as specified and directed. Make : Jaquar Cat Part No ACN 1131N and equivalent in CERA. |
| 93 | S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all specified and directed by Engr-in-charge. |
| 94 | S&F 110 mm PVC (SWR) pipes single socket in any length with rubber ring joints fixed to wall or in trenches complete all specified and directed by Engr-in-charge. |
| 95 | S&F 110 mm PVC (SWR) bends any radius with access door complete all specified and directed by Engr-in-charge. |
| 96 | S&F 110 mm PVC (SWR) branch piece, (singal T) equal or unequal with access door complete all specified and directed by Engr-in-charge. |
| 97 | M & L for 150 mm dia reinforced concrete pipes, class NP2, laid in trenches and jointed with cement mortar 1:2 complete with collars complete all specified and directed by Engr-in-charge. |
| 98 | M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete type D2 (1:4:8) for 150mm dia pipe complete all specified and directed by Engr-in-charge. |
| 99 | M&L Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) for manhole cover septic tank covers slabs etc including necessary form work and set in CM (1:4) complete all specified and directed by Engr-in-charge. |
| 100 | M & L for PCC 1:2:4 Type B-1 using 20 mm graded aggregate in surface channels and drains complete all specified and directed by Engr-in-charge. |
| 101 | M & L for preparation of new plaster surfaces of walls/ceiling and applying two coats of oil emulsion distemper (white/tinted) all specified and directed by Engr-in-charge. |
| 102 | M & L Rendering 15 mm thick on brick or concrete surfaces of walls in CM (1:4) including finishing the surfaces fair and even without using extra cement all specified and directed by Engr-in-charge. |
| 103 | M & L Rendering 10 mm thick on brick or concrete surfaces of walls in CM (1:6) including finishing the surfaces fair and even without using extra cement all specified and directed by Engr-in-charge. |
| 104 | M & L for PCC 1:2:4 Type B-1 using 20 mm graded aggregate in surface channels and drains complete all specified and directed by Engr-in-charge. |
| 105 | M&L for Mild steel Rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails guides for sliding doors, and vertical posts of pipes sections fixed with angle cleats or other connecting plates, Fe-410-W (Gde - E -250), complete all specified and directed by Engr-in-charge. |
| 106 | S&F 0.50 mm thick prepainted galvalume aluminium zinc coated GI based plain steel sheeting of any colour, having tensile strength of 550MPA as in roof covering, wall cladding with self tapping screws or 'L' type of 'J' type or cranked hook bolts in lieu of screws as per manufactures instructions, all specified and directed by Engr-in-charge. |
| 107 | M&L for hardcore of broken stone of guage n.exc 63mm deposited spread and levelled in layer n.exc 15cm thick watered and well rammed to true surfaces complete all specified and directed by Engr-in-charge. |
| 108 | M&L for 75 mm thick PCC 1:4:8, type D-2 by using 40 mm graded stone aggregate as in sub base floor complete all specified and directed by Engr-in-charge. |
| 109 | M&L for sand cushion 20 to 30 mm thick for laying and fixing interlocking tiles complete all specified and directed by Engr-in-charge. |
| 110 | M&L machine pressed precast concrete coloured interlocking paver block (glossy finish) any shape and size (sample approved by GE) confirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment. complete all specified and directed by Engr-in-charge. |
| 111 | Machine pressed (factory made) precast plain cement concrete 1:2:4 type B-1 (20mm graded crushed stone aggregate), kerb stone & the like of size 300mm x 300mm x 100mm thick or of size as approved by GE, with plain fair faces including chamfers, weathering etc, embedding in position/laid in trenches on edges of roads, including excavation in any type of soil, setting in cement mortar (1:4) returning filling and removal of surplus soil/debris to a distance n.exc. 50m from the starting point, complete all specified and directed by Engr-in-charge. |
| 112 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement. |
| 113 | M&L two coats of oil bound distemper on walls including preparation on new /old surfaces over a coat of primer complete all specified and directed by Engr-in-charge. |
| 114 | M&L for applying one coats of cement base paint after preparation of old plastered surfaces complete all specified and directed by Engr-in-charge. |
| 115 | Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power/ LED Light fittings) complete fitting such as switch, sockets, ceiling rose, pendants socket any type, rectangular board terminal boxes etc and making good disturbed surfaces of walls floors and ceiling complete all as directed.Keeping the LED lights in safe custody. |
| 116 | Taking down carefully copper/aluminium sub main wiring of size 2.5/4/6 sqmm from surface/concealed at any height and removing the materials from site and making good the disturbed surfaces of walls,floors roofs etc complete all specified and directed by Engr-in-charge. |
| 117 | Taking down Old/ Unserviceable MCB DBs TPN / Main Switches by disconnection of electric connection including old unsv MCCBs,MCBs, isolators etc and making good to distrubed surface complete all specified and directed by Engr-in-charge. |
| 118 | Disconnecting and taking down un serviceable light fittings of any description/ capacity complete all specified and directed by Engr-in-charge. |
| 119 | Taking down unserviceable Ceiling fans sealing cable end, dismentling blade and deposit to MES Yard for a safe custody of a removed fan with all accessories complete all specified and directed by Engr-in-charge. |
| 120 | Taking down ceiling fan/Exhaust fans (C/F of any size/make), cleaning its dust particles oiling,greasing,one coat of synthetic enamel white spray painting with blade ,reassemble the same along with all fittings and hanging the same back to its original position including connecting the wire to ceiling rose etc complete after completing the wiring all as specified and as directed by Engr-in-Charge.Note :- (i) The spares like condensor, ball bearing, cotter pin, nuts & bolts, connecting rods & hooks etc if found defective/damage deemed to be replaced and make the ceiling fans functional. No extra payments will be done on this account. |
| 121 | Point wiring for one light/ fan/bell point controlled by one switch using 1.5 Sq mm FRLSH copper conductor cables (multistranded) PVC insulated and unsheathed in and including PVC concealed conduit pipe as per site requirement (size not less than 20mm dia), medium grade with Modular sunken boxes & PVC/metal back plate for mounting modular type switches, sockets & regulators etc with cover plate modular type including supplying and laying PVC insulated and stranded unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire connected to earth dolly including cutting of chases in wall /ceiling etc and making good the disturbed surfaces match to existing with cement mortar and putty white /colour wash complete all specified and directed by Engr-in-charge. Make: Havells/ Finolex/ Polycab. |
| 122 | All as per srl item No 120 but for 3 pin 6 Amps socket outlet independent board including PVC insulated PVC unsheathed 2.5 sq mm earth wire and connected to earth dolly. |
| 123 | All as per srl item No 120 but for 3 pin 6 Amps socket outlet on the same board including PVC insulated PVC unsheathed 2.5 sq mm earth wire and connected to earth dolly. |
| 124 | All as per Srl item No 120 but for 3 Pin 16 Amps socket outlet independent board with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire standard and connected to earth dolly. |
| 125 | All as per srl item No 120 but for 3/5 pin 6 Amps socket outlet independent board including PVC insulated PVC unsheathed 2.5 sq mm earth wire and connected to earth dolly. |
| 126 | All as per Srl item No 120 but for 3/5 Pin 16 Amps socket outlet independent board with cable 4.00 Sq mm including copper PVC insulated PVC unsheathed 4.00 sq mm earth wire standard and connected to earth dolly. |
| 127 | S&F for modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with inner/outer plate complete all as specified and directed by Engr In charge.. |
| 128 | S&F for modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with inner/outer plate complete all as specified and directed by Engr In charge. . |
| 129 | S & F modular Bell push flush type 6 amp 230 V, 50 Hz, AC , with outer/inner cover complete all as specified and directed by Engr In charge. . |
| 130 | S&F for modular socket 3 Pin 6 Amps flush type 230 V, 50 Hz, AC , with outer/inner cover complete all as specified and directed by Engr In charge. . |
| 131 | S&F for modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with outer/inner cover completeall specified and directed by Engr-in-charge.. |
| 132 | M &L Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Blockcomplete all specified and directed by Engr-in-charge. |
| 133 | S & F calling Bell ding dong 230 volts single pole 50Hz complete all specified and directed by Engr-in-charge. |
| 134 | S & F for electronic step type fan regulator 100 watt 230 volts 50HZ 2 Module C/S deluxe modular type complete all specified and directed by Engr-in-charge. |
| 135 | S&F single pole and neutral enclosure surface mounted modular type 240 volts with 2 pin and earth plug and socket with one single pole MCB 20 Amps with indicator of complete all specified and directed by Engr-in-charge. |
| 136 | Supply and fixing LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete with all accessories as specified below :- Rated Wattage: 36 Watts Size: 600mm x 600mmInput Voltage: 220–240 Volts AC, 50 HzType: Edge-lit / Back-lit LED panel, slim designColour Temperature (CCT): Cool White (6500K) / Neutral White (4000K) as specifiedPower Factor: ≥ 0.95THD: ≤ 10%Driver: Inbuilt constant current LED driver, BIS approvedBody: Powder coated CRCA sheet / Aluminium housingDiffuser: High transmission opal acrylic / polycarbonate diffuserProtection: IP20 or betterMake: Philips / Wipro / Havells / CromptonNote:- Quoated rate includes cutting of false ceiling if required, making good damages, connection with existing wiring, earthing, testing and commissioning complete in all respects. |
| 137 | S& F LED tube light fittings of 20 wattage including rawl/plug ,making connection with and including 23/0.0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr fixed to wall firmly , complete all as specified and directed. Rated Wattage: 20 WattsType: Integrated LED Tube Light fitting (4 feet)Input Voltage: 220–240 Volts AC, 50 HzLuminous Efficacy: Minimum 100 lumens per wattColour Temperature (CCT ): Cool White (6500K) / Neutral White (4000K) as specifiedPower Factor: ≥ 0.95THD: ≤ 10%Driver: Inbuilt constant current electronic driver, BIS approvedHousing: Aluminium extruded body with opal diffuserMounting: Surface / Batten typeProtection: IP20 or betterMake: Philips / Wipro / Havells / Crompton / Bajaj |
| 138 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type warm white colour with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete |
| 139 | S&F of decorative wall mounting 1X9W fixture with frosted glass along with 9W warm white bulb GLS lamp luminaire complete all as specified and directed by Engineer-in-Charge. |
| 140 | S&F Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 12 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.(Note-MCBs will be measured separately) |
| 141 | S & F in replacement MCB single pole 240 volt any rating from 10 to 40 amps \\"C\\" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable . |
| 142 | S & F in replacement MCB single pole and neutral 240 volt any rating from 63 Amps \\"C\\" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable . |
| 143 | S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 2X6 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead all as specified. Including taking down old sub main wire. |
| 144 | S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 2X1.5 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 1.00 Sq mm as earth lead all specified and directed by Engr-in-charge. |
| 145 | S&F Electric water heater,storage type plastic body with stailness steel inner tank and heating element of 2 KW capacity 25 Ltr ,BEE 5 Star rated complete with all accessories such as safety valve,Thermostate,NRV,connection pipe etc. complete all as specified and directed by Engineer-in-Charge. |
| 146 | Supply, installation, testing and commissioning of 250 mm sweep exhaust fan, BLDC motor operated, suitable for wall mounting in toilet, complete with all accessories as specified below:Sweep Size:200 mm ,Motor Type: BLDC motor, Speed: Approx 2000 RPM Input Supply: 220–240 Volts AC, 50 HzNoise Level: Low noise type Body: High grade ABS / Polycarbonate body, glossy finishBlades: Aerodynamically designed plastic bladesMounting: Suitable for wall mounting with round cut-out approx. 200-220mmIncluding cutting of wall, making good damages, fixing with screws, connection with existing wiring, providing PVC flexible pipe if required, testing and commissioning complete in all respects all as specified and direceted by Engr-in-charge. Make:Atomberg/Havells/Bajaj |
| 147 | Supply,fixing & commisioning of Electrical Chimney of width 90 cm complete with curved glass type,wall mounted having 10 years warranty with following features:- (a) BLDC Motor 80W,Noise Reduction up to 90 db (b) Black Finish with 1500 m3/hr suction capacity (c) Control type : 9 speed Touch & Gesture (d) Power : 240 W,240 V (e)LEd Lights: 2 LED Rectangle Lights (f) Finish : Filterless Matt Black Finish with Black Powder coated oil collector auto clean type (g) Toughened Black Glass and Metal Blowerblades Make:- Faber 90cm Hood Iris or Techno commercial equivalent make in Glen,Elica |
| 148 | S&F for modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with outer strip complete all specified and directed by Engr-in-charge..Make:Legrand/Havell crabtree/L &T |
| 149 | S&F Sheet metal enclosure double door type for DBs (when MCB to be used) 8 way 240 volts with Suitable rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all specified and directed by Engr-in-charge. Make: Schneider/ Legrand/L&T |
| 150 | S & F MCB Single pole and neutral 240 volt any rating from 40 amps\\"C\\" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all specified and directed by Engr-in-charge. Make: Schneider/ Legrand/L&T |
| 151 | Supply, installation, testing and commissioning of 10 Watt LED bulkhead light fitting, suitable for wall/ceiling mounting complete with all accessories as specified below :Rated Wattage: 10 WattsType: LED bulkhead, round/oval shapeInput Voltage: 220–240 Volts AC, 50 HzColour Temperature (CCT): Cool White (6500K) / Neutral White (4000K) as specifiedPower Factor: ≥ 0.95THD: ≤ 10%Driver: Inbuilt constant current electronic LED driver, BIS approvedBody: High grade polycarbonate / die-cast aluminium housingDiffuser: Opal / frosted polycarbonate diffuserProtection: IP54 or better (suitable for damp areas)Mounting: Surface wall/ceiling mountingMake: Philips / Wipro / Havells / Crompton / Bajaj |
| 152 | Supply, installation, testing and commissioning of Instantaneous Storage Type Electric Water Heater (Geyser) 5 Litre capacity, suitable for bathroom use, complete with all accessories as specified below:Capacity: 5 LitresType: Instantaneous / Mini storage typePower Rating: 3 kW (approx.) Input Supply: 230 Volts AC, 50 Hz, Single PhaseHeating Element: Heavy duty copper / glass coated heating elementTank: Pressure type inner tank with anti-corrosion coatingBody: ABS / Rust proof outer body Working Pressure: min 6–8 barSafety Features:Inbuilt thermostat,Thermal cut-out,Multi-function safety valve,Pressure relief valve,IP Protection: IPX4 or better,Mounting: Wall mounted type,Warranty: Minimum 2 years on product and on tankMake: Havells / Bajaj / Crompton / Racold / V-Guard / AO Smith Note:- Quoted rate Includes providing and fixing necessary inlet and outlet connections PVC Pipes , CP brass nipples, connection to existing water supply line, connection to electrical point, testing and commissioning complete all as specified and directed by Engr-In-Charge. |
| 153 | S& F LED tube light fittings of 20 wattage including rawl/plug ,making connection with and including 23/0.0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr fixed to wall firmly , complete all as specified and directed. Rated Wattage: 20 WattsType: Integrated LED Tube Light fitting (4 feet)Input Voltage: 220–240 Volts AC, 50 HzLuminous Efficacy: Minimum 100 lumens per wattColour Temperature (CCT ): Cool White (6500K) / Neutral White (4000K) as specifiedPower Factor: ≥ 0.95THD: ≤ 10%Driver: Inbuilt constant current electronic driver, BIS approvedHousing: Aluminium extruded body with opal diffuserMounting: Surface / Batten typeProtection: IP20 or betterMake: Philips / Wipro / Havells / Crompton / Bajaj |
| 154 | S & F LED wall mounting mirror type white/ warm white pitcture light fitting with high out put diffuser 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with flexible copper conductor cable of suitable size complete Make: Philips /Bajaj/Havells |
| 155 | Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp,clamps,suitable bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete |
| 156 | Supply, installation, testing and commissioning of Instantaneous Storage Type Electric Water Heater (Geyser) 5 Litre capacity, suitable for bathroom use, complete with all accessories as specified below:Capacity: 5 LitresType: Instantaneous / Mini storage typePower Rating: 3 kW (approx.) Input Supply: 230 Volts AC, 50 Hz, Single PhaseHeating Element: Heavy duty copper / glass coated heating elementTank: Pressure type inner tank with anti-corrosion coatingBody: ABS / Rust proof outer body Working Pressure: min 6–8 barSafety Features:Inbuilt thermostat,Thermal cut-out,Multi-function safety valve,Pressure relief valve,IP Protection: IPX4 or better,Mounting: Wall mounted type,Warranty: Minimum 2 years on product and on tankMake: Havells / Bajaj / Crompton / Racold / V-Guard / AO Smith Note:- Quoted rate Includes providing and fixing necessary inlet and outlet connections PVC Pipes , CP brass nipples, connection to existing water supply line, connection to electrical point, testing and commissioning complete all as specified and directed by Engr-In-Charge. |
| 157 | Supply and fixing ceiling fans complete with blades and required accessories, 230 V, 1200 mm sweep without remote. Min air delivery 210 CFM with service value 6.00 BEE.Five star rated with brushless direct current motor (BLDC) fan Regulator compatible,shall incorporate inverter stabilization technology for maintaining consistent speed during voltage fluctuations.all as specified and directed by Engr-In-Charge. Make- Bajaj,Crompton, Havells,Orient |
| 158 | Supply and fixing ceiling fans complete with blades and required accessories, 230 V, 1400 mm sweep without remote. Min air delivery 245 CFM with service value 6.00 BEE.Five star rated with brushless direct current motor (BLDC) fan regulator compatible shall incorporate inverter stabilization technology for maintaining consistent speed during voltage fluctuations. all as specified and directed by Engr-In-Charge. Make- Bajaj,Havells Crompton,Orient |
| 159 | Supply, installation, testing and commissioning of 1200 mm sweep BLDC ceiling fan with remote complete with energy efficient Brushless DC (BLDC) motor, aerodynamic aluminium blades, electronic speed control and remote operation system, conforming to latest applicable IS standards and BEE 5-Star rating. The fan shall be suitable for operation on single phase 230V, 50Hz AC supply and designed for low power consumption with high air delivery. The fan shall be of sleek designer type in Gloss White finish with three balanced aluminium blades of 1200 mm sweep capable of delivering approximately 225 CFM air delivery at around 350 RPM speed. The motor shall consume approximately 35 watts at full speed and shall incorporate inverter stabilization technology for maintaining consistent speed during voltage fluctuations. * Special Features : LED speed indication, boost mode, timer mode, inverter compatible, low noise operationall specified and directed by Engr-in-charge. Make : Atomberg ,Bajaj,Crompton,Orient |
| 160 | S & F of PVC insulated twin core twisted copper flexible cable of size 23/0.0076 from connector block to ceiling rose and making connection complete all as specified & directed. |
| 161 | S & F Fan Hook made up of iron angle/rod make to bend of required shape and welded to the GI pipe/angle iron with length of 600 mm as required at site all specified and directed by Engr-in-charge.. Note- Rate of Nut,bolts, washers ,weilding required to fix the Fan hook shall be included in the Quoted rates no extra payment made on this account. Total in Figures 0.0 0.0 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jun 30, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 07, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysJul 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 days