Tender For Re Carpeting Of Roads And Parking Of 3 Year Law (Nss Till End Well) Side Line, Deptt. Of Law To Pharmacy (Block-Ii), Pharmacy (Block-Ii) To Uils, Pharmacy (Block-Ii) To Gymnasium R/A Roundabout, Boys Hostel No.4 To 7 Towards Cricket Ground, P.U. Campus Sector-14, Chandigarh.-Chandigarh
TDR : 55915315
Tender Notice
BOQ
21 Days Left
P.U. Campus Sector-14, Chandigarh.
Chandigarh
Tender For Re Carpeting Of Roads And Parking Of 3 Year Law (Nss Till End Well) Side Line, Deptt. Of Law To Pharmacy (Block-Ii), Pharmacy (Block-Ii) To Uils, Pharmacy (Block-Ii) To Gymnasium R/A Roundabout, Boys Hostel No.4 To 7 Towards Cricket Ground
Name of Work:- Re carpeting of Roads and Parking of 3 year Law (NSS till end well) side line, Deptt. Of Law to Pharmacy (block-II), Pharmacy (block-II) to UILS, Pharmacy (block-II) to Gymnasium R/A roundabout, Boys Hostel No.4 to 7 towards Cricket ground road, UIHTM to Working Women Hostel road, E1-85 to Gurudwara road, Chemistry deptt. to Girls Hostel No.3 toward main ground behind COE, Math Deptt to Library in front of Examination Hall, CII., road/parking, Botany parking in Panjab University C us, Sector-14, Chandigarh
Sl. No.
Item Description
1
Civil work
2
Providing and laying Tack coat with straight run bitumen VG-10 using sprayer pump @3.0kg/10 sqm on prepared bituminous surface, heating bitumen in boiler and spraying the bitumen with spray set fitted on bitumen boiler including cleaning of road surface , complete in all respect as per MORT&H specification and to the entire satisfaction of Engineer-in-Charge. (Ref:- N.S.)
3
Dense Graded Bituminous Macadam: Providing & laying dence graded bituminous macadam with machanical paver after mixing aggregate and bitumen as per design mix in hot mix paint using minimum @ 4.5% bitumen of grade VG-30 of total mix with aggregate confirming to requirement laid in table 500.8 and as per grading II specified in table 500.10 complete as per clause no. 507 of MORT&H specification rolling with smooth wheeled vibratory and tandem roller as per clause 501.6 and 501.7 to achieve the desired density 2.3gm/cc. Complete in all respects to the entire satisfaction of the engineer in-charge. (Ref:- N.S.)
4
Providing and laying 30-40mm thick bituminous concrete as per clause 507 of MORT&H specificatiion with mechanical paver after mixing aggregate and bitumen as per design mix plant using minimum 5.4% bitumen of grade VG-30 and using both coarse and fine aggregate filler stone dust @ 2% by weight of aggregate confirming to relevant specification laid in MORT&H specification clause 507.2.2 and 507.2.3 with grading confirming to table 500.17 gradation -II of MORT&H specification and density of bituminous concrete as laid 2.35gm/cc complete in all respect as per MORT&H specification to the entire satisfaction of Engineer-in-Charge..(Ref:- N.S.)
5
Providing and laying making kerb 30cm wide and 10cm thickness of cement concrete 1:2:4 including cement pointing 1:3 on joints etc. Complete in all respects to the entire satisfaction of the engineer in-charge.(Ref:- N.S.)
6
Providing and laying making channel 30cm wide and 7.5cm (avg) thickness of cement concrete 1:2:4 including cement pointing 1:3 on joints etc. Complete in all respects to the entire satisfaction of the engineer in-charge.(Ref:- N.S.)
7
Taking out existing kerb stones/channels of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material upto lead of 5km after refixing the existing kerbs and channels including cement grouting 1:3 as per site/ as per direction of Engineer-in-Charge.(Ref:- N.S.)
8
Providing and laying 60mm thick factory made chamfered edge steel moulded interlock paver blocks(M-30) of approved make reflective matt finish of two equal colours i.e. grey and red laid over 20 mm thick cement mortar 1:4. Complete in all respect to the entire satisfaction of the engineer-in-charge.(Ref:- N.S.)
9
Providing & laying P.C.C. 1:8:16 (1 Cement : 8 coarse sand: 16 coarse aggregate)with stone ballast 32mm guage in foundation and plinth. Complete in all respect to the entire satisfaction of the Engineer-in-charge.(Ref:- N.S.)
10
Providing and applying 2.5mm thick road marking strips (retro - reflective ) of specified shade/ colour using hot thermoplastic material by fully / semi automatic thermoplastic paint applicator machine fitted with profile shoe , glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced opreator on road surface including cost of material , labour, T&P , cleaning the road surface of all dirt, seals, oil , grease and foriegn material etc. complete as per direction of Engineer - in - charge and accorance with applicable specifications(Ref:- N.S.) Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
