|
| 1 | Supplying, fitting andfixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved makeconforming to IS-15778: 2007 . with all necessaryaccessories,specialsviz.socket,bend,tee,union,cross,elbo,nipple,longscrew, reducingsocket,reducing tee, short piece etc.fitted with holder bats clamps,including cutting pipes,fitting, fixing etc.complete in all respectincluding cost of all necessary fittings as required,jointing materials inany position above ground. For Exposed Work(i) CPVC Pipes Class-1, SDR-11 (Dia) 15 mm |
| 2 | Supplying, fitting andfixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved makeconforming to IS-15778: 2007 . with all necessaryaccessories,specials viz.socket,bend,tee,union,cross,elbo,nipple,longscrew, reducingsocket,reducing tee, short piece etc.fitted with holder bats clamps,including cutting pipes,fitting, fixing etc.complete. For Exposed Work(i) CPVC Pipes Class-1, SDR-11 (Dia) 20 mm |
| 3 | Supplying, fitting andfixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved makeconforming to IS-15778: 2007 . with all necessaryaccessories,specials viz.socket,bend,tee,union,cross,elbo,nipple,longscrew, reducingsocket,reducing tee, short piece etc.fitted with holder bats clamps,including cutting pipes,fitting, fixing etc.complete in all respectincluding cost of all necessary fittings as required,jointing materials inany position above ground. For Exposed Work(i) CPVC Pipes Class-1, SDR-11 (Dia) 25 mm |
| 4 | Supplying, fitting andfixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved makeconforming to IS-15778: 2007 . with all necessaryaccessories,specials viz.socket,bend,tee,union,cross,elbo,nipple,longscrew, reducingsocket,reducing tee, short piece etc.fitted with holder bats clamps,including cutting pipes,fitting, fixing etc.complete in all respectincluding cost of all necessary fittings as required,jointing materials inany position above ground. Exposed Work(i) CPVC Pipes Class-1, SDR-11 (Dia) 50 mm |
| 5 | Supply of Chlorinated Polyvinyl Chloride (CPVC)pipes & fittings conforming to IS-15778: 2007Q) Ball Valve (a)15mm |
| 6 | Supply of Chlorinated Polyvinyl Chloride (CPVC)pipes & fittings conforming to IS-15778: 2007Q) Ball Valve (b) 20mm |
| 7 | Supply of Chlorinated Polyvinyl Chloride (CPVC)pipes & fittings conforming to IS-15778: 2007Q) Ball Valve (c) 25mm |
| 8 | Supply of Chlorinated Polyvinyl Chloride (CPVC)pipes & fittings conforming to IS-15778: 2007Q) Ball Valve (f) 50mm |
| 9 | Supplying, fitting and fixing bib cock or stop cock. (c) (ii) Chromiumplated Bib Cock with wall flange (Equivalent to Code No. 5047 &Model - Florentine of Jaquar or similar brand). (Note: Item 7c(i), (ii) &7d (i), (ii) to be done as per specific direction of the SuperintendingEngineer.) |
| 10 | Supplying, fitting and fixing bib cock or stop cock. (a) (i) Chromiumplated Bib Cock short body (Equivalent to Code No. 511 & Model -Tropical / Sumthing Special of ESSCO or similar brand). |
| 11 | Supplying, fitting and fixing bib cock or stop cock. (f) (i) Polythene BibCock / Stop Cock (HD) with metal inlet (EMCO / ATLAS orequivalent) 15 mm |
| 12 | C.I. sluice valve with flanged ends drilled to as per I.S. 1358/62 andhaving all cast iron components as per I.S. 780/71 solid forgedbronze inside screw spindle having ultimate tensile strength not lessthan 4.72 MT per sq. cm. Spindle nut valve and seat faces of hardwear resisting, manufactured from best quality gunmetal conformingto I.S. 780/71, painted black all over with asphalt base paint tested to21 kg (hydraulic pressure) per sq. cm., valve opening to anticlockwisedirection, fitted and fixed complete. (v) 150 mm |
| 13 | Plumbing Mistry |
| 14 | Plumbing Helper |
| 15 | Original Works 12 Supplying,fitting and fixing check valve (horizontal) G.M.tested to 21 kg per sq. cm.(vi) 50 mm |
| 16 | Plaster (to wall, floor,ceiling etc.) with sand and cement mortar including rounding off orchamfering corners as directed and raking out joints includingthroating, nosing and drip course, scaffolding/staging wherenecessary (Ground floor).[surface](ii) With 1:4 cement mortar (a) 20 mm thick plaster |
| 17 | Supplying, fitting & fixing fibre reinforcedpolymer (FRP) Composite door shutters as per approved design withglass fibre reinforced plastic moulded skins and a special sandwichcore, so as to impart monolitaheic composite structure as perapproved technology of Department of Science and Technology(DST) to satisfy IS:4020 door testing performance criteria. In groundfloor (i) 32 mm thick. (For upper floors refer to item H(4) also) |
| 18 | Supplying, fitting andfixing Flat back urinal (half stall urinal) in white vitreous chinaware ofapproved make in position with brass screws on 75 mm X 75 mm X75 mm wooden blocks complete.(i) 635 mm X 395 mm X 420 mm |
| 19 | Constructing Inspection pit to adepth of 1.5 metre (inside), 250 mm thick 1st class brick work (1:4) inall sides over a layer of jhama brick soling and 150 mm thick cementconcrete with stone chips (1:3:6) including necessary earth work,fitting and fixing approved type S.W. master trap, constructingmasonry invert with cement concrete (1:1.5:3) with stone chips,plastering inside and outside (outside upto 300 mm below G.L.) with20 mm thick cement plastering (1:4) and neat cement punning,including supplying,fitting and fixing one 560 mm. dia R.C.C. manholecover of approved make with R.C.C. slab of 100 mm thick withcement concrete (1:1.5:3) with stone chips including necessaryreinforcement (upto 1%) and shuttering and necessary corbellingbrick work (1:4) so that the R.C.C. cover slab rests 150 mm aboveadjucent G.L., cement plaster (1:4) 10 mm thick on all externalsurfaces of the top slab as directed complete in all respect andremoval of surplus earth with all costs of labour and materials(excluding the cost of master trap only). (iii) 1050 mm X 750 mm(inside) chamber including fitting and fixing S.W. master trap of 225mm dia. of approved make A) With Pakur variety. (SAIL/TATA/RINL) |
| 20 | Sub Total |
| 21 | GST 18% |
| 22 | CESS 1% Please Enable Macros to View BoQ information |
