Tender For Special Repairs To Building No T-362 In Zone P At Agartala Military Station
Tender Value
9.22 Lakhs
Estimated cost
Bid Submission
07 Jul 2026
5 days left
EMD
18440
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Agartala → Tripura
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Building No T-362 In Zone P At Agartala Military Station
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 30-Jun-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 07-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of AC sheet corrugated / CGI corrugated sheets,asbestos sheet in roofing any gauge and any thickness including ridge, valley/gutter etc. |
| 2 | S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding/ eaves board fixed with selp tapping screw complete all as specified and directed. |
| 3 | S & F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.63 mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding/eaves board fixed with selp tapping screw complete all as specified and directed. |
| 4 | Dismantling wrought iron or mild steel work of any description not otherwise provided for.complete all as specified and directed. |
| 5 | S&FSteel work in tubular trusses including special shaped washer etc. complete usingERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240 complete all as specified and directed. |
| 6 | S&F Rolled mild steel Roof trusses (framed), trussed purlins crane gantries, rails & fastenings & heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. GDE Fe410-0 or Fe 310-O |
| 7 | S&F Mild steel bolts. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends;screwed end to be fitted with washers and one hexagonal or square nut.dia of bolt 11 to 15mm & length exc 5cm long and n exc10cm complete as specified. |
| 8 | M&L of two coat of synthetic enamel paint over one coat of red oxide on new steel surfaces of any description over 10cm in width or girth incl preparation of surfaces complete all as specified and as directed. |
| 9 | Demolition of brick work built in cement mortar, including quoins, pillars etc., |
| 10 | M&L for brickwork with old size subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed |
| 11 | M&L for brickwork with old size subclass `B' bricks, straight or curved on plan exc 6m mean radius in CM (1:4)built in half brick thick wall, complete all as specified and directed |
| 12 | Taking down plaster on brick or stone wall, etc incl racking out joints hacking for keys scrubbing down with water etc complete all as specified and directed.etc. |
| 13 | M&L for 15 mm thick cement plaster in cement mortar 1:4 as on brick surfaces, concrete surfaces mixed with integral WPC @3% by wt of cement etc complete all as specified and directed |
| 14 | M & L 10 mm thick rendering on fair faces of brick work or concrete surface in cm 1:6 to be finished fair and even with out suing extra cement. |
| 15 | M & L for 5 mm thick rendering in CM (1:3) on fair face of concrete surfaces as in ceiling,chajjas etc finished even and smooth without using extra cement complete all as specified and as directed. |
| 16 | M & L Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) after applying 1mm thick Wall care putty on wall Surface and preparation of new plastered surface complete all as speified. |
| 17 | M& L for preparation of new surface by applying 2mm thick Wall care putty on wall Surface and two coat of Oil bound distemper over a coat of primer complete in new wall surfaces all as specified and as directed |
| 18 | M&L for preparation of new plastered ceiling ,chajjas surfaces and applying three coats of white wash over it complete all as specified and directed. |
| 19 | M & L for complete removal of internal wall finish by scrapping down and finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) after applying 1mm thick Wall care putty on old wall surface complete all as speified and as directed |
| 20 | M& L for preparation of Old surface by applying 2mm thick Wall care putty on wall Surface and two coat of Oil bound distemper over a coat of primer complete in new wall surfaces all as specified and as directed |
| 21 | M & L for washing, rubbing down and stopping of distempered and painted surfaces of internal ceiling by scrapping down and applying two coats of white wash including preparation over old plastered ceiling /Chajjas surfaces complete all as specified and directed. |
| 22 | Material & Labour for writing letters or figures (block, Roman, Italic or Indian) n.exc.30 cm high complete all as specified and directed. |
| 23 | Supply only liquid water proofing compound |
| 24 | Taking down chowkat with shutter/without taking off shutter from the frame n.exc 1.50 Sqm each complete all as specified and directed. |
| 25 | S&F anodised Powder Coated aluminium door shutter fixed with rubber gasket, stopper, cleats, handles etc complete for aluminium frame of size 101.6mm x 44.45mm x 2mm and section of bottom and top rail of section114mmx44.45mmx2mm thick and and lock rail shutter frame of 83mm x 44.45mm x 2 mm with and including panels of 5.0 mm thick plain/frosted float glass,and with anodised aluminium snap beading of size 18.2mmx16.66mm scred for fixing fully including all necessary fittinngsand EPDM rubber packing each shutter shall be provided with two decorative type aluminium disc handle of 150 mm dia per shutter ,1 no heavy duty door closer, 1no 200mm long aluminium tower bolt and 3Nos 125 mm long Stainless steel Butt hingeds per shutter complete all as specified and as directed |
| 26 | S&F Powder coated aluminium window sliding type three track (2 glazed & one gauze shutter ) aluminium sections weighing not less than 1.67kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazing cleats, rubber packing , screws, handle, locking arrangement and 4.0mm thick plain/tinted glass and SS wire mesh and making good the surface complete all as specified . |
| 27 | S&F Powder coated aluminium louvered ventilators of size 600X600mm with glass louvers, without sash bars of aluminium sections weighing not less than 0.605kg/m for frame of size 40x20x2mm including necessary jointing cleats, glazing cleats, rubber packing , anodised aluminium snap beading,screws, anodised aluminium fittings and 4.0mm thick Frosted tinted glass fixed in panels with suitable locking arrangements and making good the surface complete all as specified and directed. |
| 28 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixingapproved anodised aluminium standard section around the opening complete all as specified and directed |
| 29 | Taking down chowkat with shutter/without taking off shutter from the frame exe 1.50 Sqm but n.exc 4.00 Sqm each complete all as specified and directed. |
| 30 | S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x60 mm complete all as specified and directed |
| 31 | M&L Plain cement concrete in bed block and filling of door frame type C-1 1:3:6 (20 mm graded stone aggregate) complete all as specified and directed |
| 32 | S&F 35mm thick Factory made Flush shutter solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed |
| 33 | M & L for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 34 | M & L preparation of new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer exc 10 cm width or girth complete all as specified and as directed. |
| 35 | S&F 100mm size type B-21 Butt hinges, extruded aluminum alloy with galvanized MS sheet hinges pin anodized complete all as specified and as directed |
| 36 | S&F 150mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified and as directed. |
| 37 | S&F 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed. |
| 38 | S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed |
| 39 | Dismantling ceiling board(fibre pulp insulation) or insulation boards any thickness including cover fillets complete all as specified and as directed |
| 40 | S & F Aluminium anodised snap grid frame work for false ceiling of grid size 605 x 605 mm as specified and suspended with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats complete all as specified and directed |
| 41 | S&F for Non asbestos fibre cement building board (E- Board) 4 mm thick for fixed to Aluminium frame work with screws as in ceiling complete as specified and as directed. |
| 42 | Demolition of Cement concrete(Unreinforced) of any description not otherwise specifically provided, complete all as specified and as directed |
| 43 | Material and labour 75 mm thick PCC 1:3:6 type C2 using 40 mm graded aggregate as in plinth protection finished fair and even w/o using extra cement and making groove of 10mm width at every 3m intervals and at diagonals and filling the joints with bitumen mastic( a mix of bitumen and sand in 1:1 by weight) complete all as specified and as directed |
| 44 | Material and labour PCC 1:3:6 type C2 using 40 mm graded aggregate as in surface channel/drain complete all as specified and directed. |
| 45 | Supply & Fix in Repair 25mm dia mild steel chromium plated curtain rod fixing with brackets, stop, rollers complete all as specified and as directed. |
| 46 | S&F in repairs 110 mm PVC (SWR) pipes single socketed in any length rubber ring joints fixed on walls all as specified and directed |
| 47 | NOTES :-1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum.2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc, required for complete and proper execution of the work. Refer Schedule 'A' notes for details. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 07, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysJul 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 days