Tender For Provision Of Sewage Line At Af Stn Sirsa
Tender Value
5.10 Crore
Estimated cost
Bid Submission
17 Jul 2026
6 days left
EMD
5.80 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sirsa → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Provision Of Sewage Line At Af Stn Sirsa
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 03-Jul-2026 | CORRIGENDUM01 | Other | 17-Jul-2026 |
| 2 | 03-Jul-2026 | CORRIGENDUM1 | BOQ | 17-Jul-2026 |
| 3 | 03-Jul-2026 | CORRIGENDUM | Date | 17-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE `A' PART - I (Building Works) is not prepriced by MES and prepriced rates indicates 0.0 under column 6 signified this fact only. |
| 2 | Construction of Pump House building with permanent specifications complete all as specified and shown on drawings. |
| 3 | Construction of liftwell of internal dia 3.00 m, foundation depth 3.70 m below ground level complete all as specified and shown on drawings. |
| 4 | Construction of liftwell of internal dia 3.00 m, foundation depth 3.85 m below ground level complete all as specified and shown on drawings. |
| 5 | Construction of liftwell of internal dia 3.00 m, foundation depth 3.90 m below ground level complete all as specified and shown on drawings. |
| 6 | Construction of liftwell of internal dia 5.00 m, foundation depth 4.50 m below ground level complete all as specified and shown on drawings. |
| 7 | Construction of liftwell of internal dia 5.25 m, foundation depth 4.90 m below ground level complete all as specified and shown on drawings. |
| 8 | Construction of Sumpwell of internal dia 5.50 m, overall depth 5.50 m complete all as specified and shown on drawings. |
| 9 | NOTE: Schedule ‘A’ Part II to XI under Ser No 2.01 to 2.10 are Prepriced by MES. |
| 10 | Lump sum price worked out by the Contractor for “SITE CLEARANCE, EXCAVATION AND EARTH WORK” as listed in Schedule ‘A’ Part II |
| 11 | Lump sum price worked out by the Contractor for “INTERNAL ELECTRIFICATION WORKS\\" as listed in Schedule ‘A’ Part III |
| 12 | Lump sum price worked out by the Contractor for “INTERNAL WATER SUPPLY WORKS\\" as listed in Schedule ‘A’ Part IV |
| 13 | Lump sum price worked out by the Contractor for “SEWAGE DISPOSAL WORKS\\" as listed in Schedule ‘A’ Part V |
| 14 | Lump sum price worked out by the Contractor for “AREA DRAINAGE WORKS” as listed in Schedule ‘A’ Part VI |
| 15 | Lump sum price worked out by the Contractor for “EXTERNAL ELECTRIC SUPPLY WORKS” as listed in Schedule ‘A’ Part VII |
| 16 | Lump sum price worked out by the Contractor for “ROAD, PATH AND HARDSTANDING WORKS & CULVERT” as listed in Schedule ‘A’ Part VIII |
| 17 | Lump sum price worked out by the Contractor for “FENCING WITH IRON GATE” as listed in Schedule ‘A’ Part IX |
| 18 | Lump sum price worked out by the Contractor for “SEWAGE INSTALLATION\\" as listed in Schedule ‘A’ Part X |
| 19 | Lump sum price worked out by the Contractor for “STAGING FOR FLUSHING TANK ” as listed in Schedule ‘A’ Part-XI |
| 20 | SCHEDULE `A' PART - XII MISC ITEMS is not prepriced by MES and prepriced rates indicates 0.0 under column 6 signified this fact only. |
| 21 | “INTERNAL ELECTRIC SUPPLY\\" |
| 22 | Supply and fix blank plate one module complete all as specified and directed by Engr in Charge. |
| 23 | Supply and fixing LED building security light fitting 25 Watt 230 V AC outdoor type with high-pressure die cast aluminum housing and heat-resistant complete with driver, lamp, GI bracket with impact and corrosion resistant, including thermal management in multiple optics, complete with IP 65/66 protection complete all as specified and directed by Engr in Charge. |
| 24 | \\"SEWAGE DISPOSAL\\" |
| 25 | S&F of 150 mm dia Double wall corrugated (DWE PE) (SN8) laid and jointed complete with collars complete all as specified and directed by Engr in Charge. |
| 26 | S&F of 200 mm dia Double wall corrugated (DWE PE) (SN8) laid and jointed complete with collars complete all as specified and directed by Engr in Charge. |
| 27 | S&F of 250 mm dia Double wall corrugated (DWE PE) (SN8) laid and jointed complete with collars complete all as specified and directed by Engr in Charge. |
| 28 | S&F of 300 mm dia Double wall corrugated (DWE PE) (SN8) laid and jointed complete with collars complete all as specified and directed by Engr in Charge. |
| 29 | \\"EXTERNAL ELECTRIC SUPPLY\\" |
| 30 | Supply, installation, testing & commisioning of factory made (CPRI test certified manufacturer) LT Panel, indoor type, floor mounted, double door, cubical compartmentalized type suitable for 415 volts, 3 phase, 4 wire (100% neutral), 50 Hz supply system all as specified and directed having busbar chamber with insulated aluminium busbar 200 Amps rating (100% neutral) installed on porcelain insulators. The panel shall be dust and vermin proof made of 2.00 mm CRCA MS sheet and 50x50x6 mm angle iron frame work duly powder coated finish. Front & back opening type with aprons for cable entry with locking arrangement including internal wiring with PVC insulated multistranded copper conductor cables of suitable size grouted by using PCC foundation 1:2:4 type B1 with 20 mm graded stone aggregate, thimbling and cable entry boxes with cable glands. Inner Shell shall be made out of 2 mm thick CRCA sheet duly compartmentalised for each control gear, front openable single door system locable/openable by keys from both sides having locks having louvers & air vent gasket for neutral flow of air to accomodate incommer MCCB and TPN bus bar. The IP protection of inner shell shall be IP-42 The scope of the work also all type of civil work, foundation includes supply and fixing the followings. Digital Amp meter-01 nos, Digital voltmeter-01 nos, LED indicator-03 nos, selector switches, CTs (resin casted), fuses, wiring etc complete. Incoming:(a) MCCB 100 Amp 4 P, 10 kA - 01 NosOutgoing:(a) MCB 40 Amp 4 P, 10 kA - 02 Nos(b) MCB TP 63 A - 01 Nos(c) Onload Changeover 63 Amp - 01 Nos |
| 31 | Supply and fix CI cable route indicator 150mm dia , 5mm thick duly engraved with \\" LT 1100 volts\\" having CI rod 10mm dia, 50 to 70 cm long, duly welded to round plate and painted with 2 coats of synthetic enamel paint over a coat of red oxide primer, complete with grounting in PCC 1:4:8 all as specified and as directed by Engr-in-charge. |
| 32 | “ROAD, PATH AND HARDSTANDING WORKS & CULVERT” |
| 33 | Material and labour 10 mm thick Endura super grip series 2 coloured tile, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engg-in-Charge. (Make- Johnon or equivalent approved make) |
| 34 | \\"SEWAGE INSTALATION\\" |
| 35 | S&F of Non clog vertical submersible pumps of 2 HP capacity with chrome steel impeller and cutter, water resistant, non-clog to pass 20 mm size particles having flow rate 120 LPM and head 25 meter including Supply, installation with guide rail and lifting chain, cables, testing complete with 2 years maintenance Make - Kirloskar model No 1500 CW or equivalent. (approved make) |
| 36 | S&F of Non clog vertical submersible pumps of 3HP capacity with chrome steel impeller and cutter, water resistant, non-clog to pass 20 mm size particles having flow rate 335 LPM and head 25 meter including Supply, installation with guide rail and lifting chain, cables, testing complete with 2 years maintenance Make - Kirloskar model No 2200 CW or equivalent. (approved make) |
| 37 | S&F of Non clog vertical submersible pumps of 5 HP capacity with chrome steel impeller and cutter, water resistant, non-clog to pass 20 mm size particles having flow rate 625 LPM and head 25 meter including Supply, installation with guide rail and lifting chain, cables, testing complete with 2 years maintenance Make - Kirloskar model No 3700 CW or equivalent. (approved make) |
| 38 | Non clog vertical submersible pumps 20 HP with chrome steel impeller and cutter, water resistant non-clog to pass 40 mm size particles having flow rate 1150 LPM and head 33 meter including Supply, installation with guide rail and lifting chain, cables, testing complete with 2 years maintenance Make - Kirloskar model No 15000 CW 4P or equivalent. (approved make) |
| 39 | Supply, installation, testing & commisioning of factory made (CPRI test certified manufacturer) LT Panel, outdoor type, floor mounted, double door, cubical compartmentalized type suitable for 415 volts, 3 phase, 4 wire (100% neutral), 50 Hz supply system all as specified and directed having busbar chamber with insulated aluminium busbar 200 Amps rating (100% neutral) installed on porcelain insulators. The panel shall be dust and vermin proof made of 3.00 mm CRCA MS sheet and 50x50x6 mm angle iron frame work duly powder coated finish. Front & back opening type with aprons for cable entry with locking arrangement including internal wiring with PVC insulated multistranded copper conductor cables of suitable size grouted by using PCC foundation 1:2:4 type B1 using 20 mm graded stone aggregate, thimbling and cable entry boxes with cable glands. Inner Shell shall be made out of 2 mm thick CRCA sheet duly compartmentalised for each control gear, front openable single door system locable/openable by keys from both sides having locks having louvers & air vent gasket for neutral flow of air to accomodate incommer MCCB and TPN bus bar. The IP protection of inner shell shall be IP-42 The scope of the work alsoall type of civil work, foundation includes supply and fixing the followingsINCOMING(a) MCCB 3 pole 40 Amp 16 KA 415 V -01Out going(a) DOL starter suitable for 2 HP submercible pump -03(b) Existing cable connect with busbar properly with suitable size Lug. |
| 40 | Supply, installation, testing & commisioning of factory made (CPRI test certified manufacturer) LT Panel, outdoor type, floor mounted, double door, cubical compartmentalized type suitable for 415 volts, 3 phase, 4 wire (100% neutral), 50 Hz supply system all as specified and directed having busbar chamber with insulated aluminium busbar 200 Amps rating (100% neutral) installed on porcelain insulators. The panel shall be dust and vermin proof made of 3.00 mm CRCA MS sheet and 50x50x6 mm angle iron frame work duly powder coated finish. Front & back opening type with aprons for cable entry with locking arrangement including internal wiring with PVC insulated multistranded copper conductor cables of suitable size grouted by using PCC foundation 1:2:4 type B1 using 20 mm graded stone aggregate, thimbling and cable entry boxes with cable glands. Inner Shell shall be made out of 2 mm thick CRCA sheet duly compartmentalised for each control gear, front openable single door system locable/openable by keys from both sides having locks having louvers & air vent gasket for neutral flow of air to accomodate incommer MCCB and TPN bus bar. The IP protection of inner shell shall be IP-42 The scope of the work alsoall type of civil work, foundation includes supply and fixing the followingsINCOMING(a) MCCB 3 pole 40 Amp 16 KA 415 V -01Out going(a) DOL starter suitable for 3 HP submercible pump -03(b) Existing cable connect with busbar properly with suitable size Lug . |
| 41 | Supply, installation, testing & commisioning of factory made (CPRI test certified manufacturer) LT Panel, indoor type, floor mounted, double door, cubical compartmentalized type suitable for 415 volts, 3 phase, 4 wire (100% neutral), 50 Hz supply system all as specified and directed having busbar chamber with insulated aluminium busbar 200 Amps rating (100% neutral) installed on porcelain insulators. The panel shall be dust and vermin proof made of 2.00 mm CRCA MS sheet and 50x50x6 mm angle iron frame work duly powder coated finish. Front & back opening type with aprons for cable entry with locking arrangement including internal wiring with PVC insulated multistranded copper conductor cables of suitable size grouted by using PCC foundation 1:2:4 type B1 using 20 mm graded stone aggregate, thimbling and cable entry boxes with cable glands. Inner Shell shall be made out of 2 mm thick CRCA sheet duly compartmentalised for each control gear, front openable single door system locable/openable by keys from both sides having locks having louvers & air vent gasket for neutral flow of air to accomodate incommer MCCB and TPN bus bar. The IP protection of inner shell shall be IP-42 The scope of the work alsoall type of civil work, foundation includes supply and fixing the followingsINCOMING(a) MCCB 3 pole 63 Amp 16 KA 415 V -01Out going(a) FASD starter suitable for 5 HP submercible pump -03(b) Existing cable connect with busbar properly with suitable size Lug . |
| 42 | Supply, installation, testing & commisioning of factory made (CPRI test certified manufacturer) LT Panel, indoor type, floor mounted, double door, cubical compartmentalized type suitable for 415 volts, 3 phase, 4 wire (100% neutral), 50 Hz supply system all as specified and directed having busbar chamber with insulated aluminium busbar 200 Amps rating (100% neutral) installed on porcelain insulators. The panel shall be dust and vermin proof made of 2.00 mm CRCA MS sheet and 50x50x6 mm angle iron frame work duly powder coated finish. Front & back opening type with aprons for cable entry with locking arrangement including internal wiring with PVC insulated multistranded copper conductor cables of suitable size grouted by using PCC foundation 1:2:4 type B1 using 20 mm graded stone aggregate, thimbling and cable entry boxes with cable glands. Inner Shell shall be made out of 2 mm thick CRCA sheet duly compartmentalised for each control gear, front openable single door system locable/openable by keys from both sides having locks having louvers & air vent gasket for neutral flow of air to accomodate incommer MCCB and TPN bus bar. The IP protection of inner shell shall be IP-42 The scope of the work alsoall type of civil work, foundation includes supply and fixing the followingsINCOMING(a) MCCB 3 pole 63 Amp 16 KA 415 V -01Out going(a) FASD starter suitable for 20 HP submercible pump -03(b) Existing cable connect with busbar properly with suitable size Lug . |
| 43 | Supply and laying , testing for HDPE pipe 80/90 mm internal dia PE100 PN10. |
| 44 | M & L PVC insulated & PVC sheathed, Submersible cable 10 sqmm, flat, 3 core, 1100 Volt & conforming to IS 694. |
| 45 | M & L PVC insulated & PVC sheathed, Submersible cable 2.5 sqmm, flat, 3 core, 1100 Volt & conforming to IS 694. |
| 46 | Supply, Installation, Testing and Commissioning of PLC (Programmable Logic Controller) with Retandant System Panel floor mounted indoor,Transmitter panel to automatically control the raw water / sludge water Pumps with ultrasonic sensor- 1 set. and comprising of the following :- Including Having following Feature & including Following Switchgear. internal processing unit for the low and medium performance range of the central and decentralized control, programming by means of FBD, LAD, STL in accordance with HMI: Multi-panel for operating and monitoring & controlling of Pumps operations,use as thin client for terminal services, remote maintenance and services via the Internet / Intranet/RF interfacing to different manufacturers, display of HTML documents, with pixel-graphics 7\\"-10.4\\" TFT- touch display with background lighting, LM Device : The LM Module should be a single Module having following features inbuilt without use of any external hardware: Active and reactive power with voltage module Active and reactive energy with voltage module True power factor with voltage module- and PLC will be compatible for 2 HP vertical sludge pumps- 9 No |
| 47 | Supply, Installation, Testing and Commissioning of PLC (Programmable Logic Controller) with Retandant System Panel floor mounted indoor,Transmitter panel to automatically control the raw water / sludge water Pumps with ultrasonic sensor- 1 set. and comprising of the following :- Including Having following Feature & including Following Switchgear. entral processing unit for the low and medium performance range of the central and decentralized control, programming by means of FBD, LAD, STL in accordance with HMI: Multi-panel for operating and monitoring & controlling of Pumps operations,use as thin client for terminal services, remote maintenance and services via the Internet / Intranet/RF interfacing to different manufacturers, display of HTML documents, with pixel-graphics 7\\"-10.4\\" TFT- touch display with background lighting, LM Device : The LM Module should be a single Module having following features inbuilt without use of any external hardware: Active and reactive power with voltage module Active and reactive energy with voltage module True power factor with voltage module- and PLC will be compatible for 3 HP vertical sludge pumps- 3 No |
| 48 | Supply, Installation, Testing and Commissioning of PLC (Programmable Logic Controller) with Retandant System Panel floor mounted indoor,Transmitter panel to automatically control the raw water / sludge water Pumps with ultrasonic sensor- 1 set. and comprising of the following :- Including Having following Feature & including Following Switchgear. entral processing unit for the low and medium performance range of the central and decentralized control, programming by means of FBD, LAD, STL in accordance with HMI: Multi-panel for operating and monitoring & controlling of Pumps operations,use as thin client for terminal services, remote maintenance and services via the Internet / Intranet/RF interfacing to different manufacturers, display of HTML documents, with pixel-graphics 7\\"-10.4\\" TFT- touch display with background lighting, LM Device : The LM Module should be a single Module having following features inbuilt without use of any external hardware: Active and reactive power with voltage module Active and reactive energy with voltage module True power factor with voltage module- and PLC will be compatible for 5 HP vertical sludge pumps- 3 No |
| 49 | Supply, Installation, Testing and Commissioning of PLC (Programmable Logic Controller) with Retandant System Panel floor mounted indoor,Transmitter panel to automatically control the raw water / sludge water Pumps with ultrasonic sensor- 1 set. and comprising of the following :- Including Having following Feature & including Following Switchgear. entral processing unit for the low and medium performance range of the central and decentralized control, programming by means of FBD, LAD, STL in accordance with HMI: Multi-panel for operating and monitoring & controlling of Pumps operations,use as thin client for terminal services, remote maintenance and services via the Internet / Intranet/RF interfacing to different manufacturers, display of HTML documents, with pixel-graphics 7\\"-10.4\\" TFT- touch display with background lighting, LM Device : The LM Module should be a single Module having following features inbuilt without use of any external hardware: Active and reactive power with voltage module Active and reactive energy with voltage module True power factor with voltage module- and PLC will be compatible for 20 HP vertical sludge pumps- 3 No |
| 50 | Supply,Installation,Commissioning and testing of high torque motorized valve of 100mm bore with gears and adapters self lubricating type,Weather proof with protection against,Over voltage jamming of valve and over current protection with manual by pass arrangement to Open/Close the valve on power failure including taking down complete. Make:- Sasa/Leader/Kirloskar |
| 51 | Supply,Installation,Commissioning and testing of high torque motorized valve of 50mm bore with gears and adapters self lubricating type, Weather proof with protection against, Over voltage jamming of valve and over current protection with manual by pass arrangement to Open/Close the valve on power failure including taking down complete. Make:- Sasa/Leader/Kirloskar |
| 52 | Supply,Installation,Commissioning and testing of high torque motorized valve of 80mm bore with gears and adopters self lubricating type, Weather proof with protection against, Over voltage jamming of valve and over current protection with manual by pass arrangement to Open/Close the valve on power failure including taking down complete. Make:- Sasa/Leader/Kirloskar |
| 53 | Supplying , laying and Testing of XLPE Insulated Cable 4 x2.5 Sqmm core armoured cable 1100v grade with stranded copper conductor |
| 54 | Supply,Installation,Commissioning and testing of Ultra Sonic non contact for level monitoring for over head tank. Make:- Schneider / Siemens/ABB and consisting of following of features:- (i) Sensor shall be mounted at the top. (ii) Should be suitable for clean water, Chemical or corrosive liquids. (iii) Should provide precise level reading with minimal error. (iv) Should be able to install at the top of the tank. (v) Should provide real-time level data. (vi) Can be connected to pumps for automatic ON/OFF control. (vii) Shall prevents overflow and dry running of motors. (viii) It shall be suitable to integrate with SCADA or IOT based monitoring system. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 17, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 days
Jul 17, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 days
Jul 17, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 daysJul 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender