Tender For Addition Alteration Certain Works In Building No P-122 At Afssr Under Ge (Af) Gurgaon
Tender Value
43.88 Lakhs
Estimated cost
Bid Submission
07 Jul 2026
0 days left
EMD
88000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gurgaon → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration Certain Works In Building No P-122 At Afssr Under Ge (Af) Gurgaon
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 30-Jun-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 07-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed. |
| 2 | Dismantling of stone slabs and tiles of any description or thickness in floors, approachs, dado/Partitions etc complete all as specified and as directed |
| 3 | Demolition reinforced cement concrete in roofs, floors (other than ground floors), beams staircases, landing, chajjas, Shelves and similar suspended work (reinforcement cut as required to facilitate demolition) |
| 4 | Dismantling Floor, Paver Tiles, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed. |
| 5 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level), including removal of rubbish outside MoD land, complete all as specified and as directed. |
| 6 | Dismantling of ACP sheet, all as directed by Engr-in-Charge |
| 7 | M&L for brick work with sub class \\"B\\" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed |
| 8 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and as directed |
| 9 | M&L Rendering (External) 15mm thick in Cement Mortar 1:4 on Brick Walls or on Concrete Surfaces, mixing WPC as per manufacturers instructions, Plastered Surfaces finished Fair and Even, complete all as specified and as directed.NOTE: WPC will be Measured and Paid under appropriate Item. Area includes in this items upto 4 stories of building. |
| 10 | M&L for rendering 15 mm thick on brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extra cement complete all as specified and directed. |
| 11 | M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces on ceiling/ struts in patches in CM 1:3. finishing even and smooth without using extra cement complete all as specified and directed. |
| 12 | M&L for cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in copings, roof padding, staging of water tank, benching etc and similar nature of works mixed with water liquid proofing admixture as per manufacturer's instruction including finishing even and smooth using extra cement and rounded or chamfered on edges and necessary foamwork complete all as specified and directed by Engineer-in-Charge. Note :- (i) WPC shall be measured and paid separately. (ii) Rates include to carried out the work on roof slabof building & nothing extra shall be admissible on this account). |
| 13 | Supply only integral water proofing compound. |
| 14 | M&L for 2mm thick birla white putty and making the surface smooth etc complete as specified and directed |
| 15 | M&L for preparing Old plastered surface of walls and applying two coat of oil emulsion distemper white or any tint etc complete as specified and directed |
| 16 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces including preparing old Decorated/Treated Plastered surfaces of Walls by Complete Removal of existing Treatment and by applying 2mm thick plaster of paris Wall Putty, cutting/ rubbing to obtained a Smooth Surface complete all as specified and as directed. |
| 17 | M & L for Finishing walls with textured interior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm |
| 18 | Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) complete all as specified and directed. |
| 19 | Taking down Chowkats or frames from the opening of size exceeding 1.5 Sqmtr but not exceeding 4 Sqmtr each with shutters ( without taking off shutters from the frames) complete all as specified and directed. |
| 20 | Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed |
| 21 | S & F Providing and fixing factory made UPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated),steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.Area not exceeding 2.00 sqm each.((Note: The unit rate quoted by contractor includes cost of glass and all other connected accessories. Net opening will be measured for payment purpose.) |
| 22 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be include in the quoted lum sum). →Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 23 | S & F in repair Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borerproof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be included in the lumpsum quoted by the contractor. |
| 24 | S&F 30mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed. |
| 25 | M&L for 75 mm thick cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate in sub base all as specified & directed by Engr -in charge |
| 26 | M&L for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in floor finishing complete all as specified and directed |
| 27 | M&L for Polish Glazed Vitirified Ceramic Tiles 10mm thick (Square/Rectangular), Light shade Polished, area of each Tile exc. 0.42 Square Metre but not exc 1.0 Sqm as in Floors, etc. set and jointed in Neat Cement Slurry and pointed in White or Coloured Cement to match the Tiles, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed.NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate. |
| 28 | M&L for Polish Glazed Vitirified Ceramic Tiles 10mm thick (Square/Rectangular), Light shade, Polished, area of each Tile not exc. 0.36 Square Metre in Floors, etc. set and jointed in Neat Cement Slurry and pointed in White or Coloured Cement to match the Tiles, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed.NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate. |
| 29 | M&L for Polish Glazed Vitirified Ceramic Tiles 10mm thick (Square/ Rectangular) Light shade, Polished, area of each Tile not exc. 0.36 Square Metre in Vertical Surface i.e. Dado, Skirting,etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including 10mm thick rendering in Cement Mortar 1:4, complete all as specified and as directed.NOTE : Cost of Cement Mortar shall deem to be include in the Quoted Unit Rate. |
| 30 | M&L Coloured Glazed Ceramic Tiles 300x600x7mm thick in Vertical Surface i.e. Dado, Skirting,etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including 10mm thick rendering in Cement Mortar 1:4, complete all as specified and as directed.NOTE : Cost of Rendering Cement Mortar shall deem to be include in the Quoted Unit Rate. |
| 31 | M&L for non-skid tiles ceramic coloured tiles 7 to 8 mm thick of size 400mmx400 mm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 15 mm thick screed bedding layers in CM (1:4) complete all as specified and as directed.NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate. |
| 32 | M&L for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 40cm x 40cm x 25mm thick ( as approved by GE) set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc laid over including 15 mm thick cement screed bed in CM 1:6 . complete all as specifed and as directed |
| 33 | M&L for exterior grade, coloured glossy finish ceramic designer endura tiles of size 30cm x 30cm x 8-10mm thick (as approved by GE) set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc laid over and including 15 mm thick screed bed in cm 1:6 complete all as specifed and as directed |
| 34 | M & L broken brick bats as in foundation for Loose filling with aggregates of gauge 40 to 80mm complete all as specified and as directed. |
| 35 | M&L for granite (Black) stone slab 15-18mm thick machine cut and machine polised, in skirting, Kitchen platform /dado, in floor etc laid over cement screed jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including pinning in brick/concrete wall to hold & support the vertical surfaces to granite work including drilling to wall & including screed bed 15 mm thick in cement mortar 1:4 complete all as specified and as directed by Engineer-In- Charge. |
| 36 | M&L for mild steel TMT bars 10 mm dia and over, cut to length and bent to shape required and binding with mild steel wire dia not less than 0.9 mm (annealed) complete all as specified complete all as specified and as directed. |
| 37 | All as per item No 34 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified complete all as specified and as directed. |
| 38 | M&L for reinforced Cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) as in foundation, including raft, footings, foundation beam, plinth beam bases for column complete all as specified and directed. |
| 39 | M&L for reinforced Cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) as in Column pillrs piers complete all as specified and directed. |
| 40 | M&L for reinforced Cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) as in roof slab supported on walls beam and columns in floors, lintels complete all as specified and directed. |
| 41 | M&L for reinforced Cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) as in beams, cantilever, ressummeers ,lintels over 1.5 span complete all as specified and directed. |
| 42 | M & L for Formwork to sides of concrete foundation,footings, bases of columns, raft and raft beams sides and soffits (if any) of foundationand plinth beam and similar work vertical or to batter for rough finished surface of concrete etc. complete all as specified and directed. |
| 43 | M & L for Formwork to soffits of suspended slabs such as roof slab, floor slabs, labdingand similar work . complete all as specified and directed. |
| 44 | M & L for Formwork to soffits of floor or roof beam, beam haunching, girders, lintels, cantilivers, shelvesincluding supports, overhang, etc. also splays between floor and beams, for rough finished surface of concrete etc. complete all as specified and directed. |
| 45 | M & L for Formwork to soffits of pillar, posts struts, peiers , columns and stanchion , for rough finished surface of concrete etc. complete all as specified and directed. |
| 46 | Dismantling Structural Steel or Mild Steel Work of any description including Framed Truss, etc., complete all as specified and as directed. |
| 47 | Dismantling damaged/unserviceable Galvalume, Fibre Glass Reinforced Translucent Corrugated Sheeting,AC and Fiber Sheeting of any gauge and thickness, complete all as specified and as directed. |
| 48 | M&L Steel Work in Tubular Trusses including Special shaped Washer etc. complete using ERW or Induction Butt Welded Tubes, confirming to IS-1161-1979 Grade-240, complete all as specified and as directed. |
| 49 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 50 | M&L Fibre Glass Reinforced Translucent Corrugated Sheeting 2.0mm thick with 20 Cm Side Lap and 15 Cm End Lap, fixed with Coach Screw and Washer in Roof, Walls, etc., complete all as specified and as directed by Engr-in-Charge. |
| 51 | S&F 5-6 mm hollow PVC Wall Lining consisting of 5mm thick single side prelam PVC colour sheet inclusive of solvent cement and fixing at site including 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification. |
| 52 | S&F for PVC fluted panel wall Panneling printed in any colour PVC sheet inclusive of solvent cement and fixing at site on PVC Frame as per specification complete all as specified and as directed.Note : Design /Pattern will be selected by GE/Engr-in-Charge. |
| 53 | S&F Stainless Steel Curtain Rod 25mm dia/bore (as approved) including fixing stainless steel Bracket(shaped as approved) not less than 80mm long to wall with Screws/ secured with stainless steel side doom(as approved) fitted/tightened on Curtain Rod at both ends with screw including taking down old curtain rod of any description, complete all as specified and as directed. |
| 54 | S&F One Piece Euorpen Water Closet Concealed of size 790x360x650mm Snow White, Soft Close Seat Cover having Twin Flush Fittings and Making Good to Floor/ distrubed Surfaces, complete all as specified and as directed.MAKE : JAQUAR SLS-WHT-6851S (WC), or eqivalent in CERA/ HINDUSTAN SANITARYWARE/ PARRYWARE (as approved by GE) |
| 55 | S&F Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back) with Brass Chromium Plated Waste Fitting 32mm bore (dia) and PVC Waste Pipe 32mm bore (dia) including a Pair of Cast Iron Brackets Brackets Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed-in-repairs, complete all as specified and as directed. CAT PART NO 10052 of HINDWARE or equivalent as approved . |
| 56 | S&F Bib Tap 15mm bore (dia), Cast Copper alloy, Fancy type Chromium Plated with Crutch or Butterfly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and Chromium Plated Wall Flange complete all as specified and as directed by Engineer-in-Charg. Cat Part No PRS-CHR 043 of Make : JAQUAR, or equivalent as approved by GE. |
| 57 | S & F central hole basin mixer chromium plated fancy type cast copper alloy with auto closing system Cat Part NO CON-CHR-169KNB of Make : JAQUAR or equivalent as approved screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe complete all as specified and directed by Engineer-in-Charge. |
| 58 | S&F Stop Cock/ Angle Valve 15mm bore (dia), Cast Copper Alloy, Fancy type, Chromium Plated with long Shank and Cup (Concealed type), screwed down, high pressure and fixing-in-repairs, complete all as specified and as directed. with Cat Part No COT-CHR 23053 of Make : JAQUAR, or equivalent complete all as specified and directed by Engineer-in-Charge. |
| 59 | S & F Glass corner self chromium plated fancy type cast copper alloy with Cat Part No ACN-CHR-1173 of Make : JAQUAR, or equivalent as approved complete all as specified and directed by Engineer-in-Charge. |
| 60 | S & F double arm wall mounted mirror with Cat Part No ACN-CHR-1193N of Make : JAQUAR, or equivalent as approved complete all as specified and directed by Engineer-in-Charge. |
| 61 | S & F double coat hook with Cat Part No AQN-CHR-7761 of Make : JAQUAR, or equivalent as approved complete all as specified and directed by Engineer-in-Charge. |
| 62 | S & F glass self 600mm long with Cat Part No ACN-CHR-1171N of Make : JAQUAR, or equivalent as approved complete all as specified and directed by Engineer-in-Charge. |
| 63 | S & F paper holder with Cat Part No AHS-CHR-1553 of Make : JAQUAR, or equivalent as approved complete all as specified and directed by Engineer-in-Charge. |
| 64 | S & F soap dispenser with Cat Part No AKP-CHR-35735P1 of Make : JAQUAR, or equivalent as approved complete all as specified and directed by Engineer-in-Charge. |
| 65 | S & F soap dish holder with Cat Part No AQN-CHR-7731 of Make : JAQUAR, or equivalent as approved complete all as specified and directed by Engineer-in-Charge. |
| 66 | S & F towel rack with Cat Part No AHS-CHR-1581H of Make : JAQUAR, or equivalent as approved complete all as specified and directed by Engineer-in-Charge. |
| 67 | S & F towel ring with Cat Part No AQN-CHR-7721 of Make : JAQUAR, or equivalent as approved complete all as specified and directed by Engineer-in-Charge. |
| 68 | S & F towel rail 600mm long with Cat Part No AKP-CHR-35711PS of Make : JAQUAR, or equivalent as approved complete all as specified and directed by Engineer-in-Charge. |
| 69 | S & F alive maze over head shower with shower arms of Cat Part No OHS-CHR-85859M of Make : JAQUAR, or equivalent as approved complete all as specified and directed by Engineer-in-Charge. |
| 70 | S&F Wall Mixer 15mm bore (dia), Chromium Plated, Telephonic type with Flanges including Telephonic Shower Tube 1.50 Metre long with Hook and fixing-in-repairs, complete all as specified and as directed. Cat Part No KUP-CHR-35115P of Make : JAQUAR, or equivalent. |
| 71 | S&F Stop Cock 15mm bore (dia), Cast Copper Alloy, Fancy type, Chromium Plated with long Shank and Cup (Concealed type), screwed down, high pressure and fixing-in-repairs, complete all as specified and as directed. Cat Part No ALD-CHR-089CQT of Make : JAQUAR, or equivalent as approved , complete all as specified and directed by Engineer-in-Charge. |
| 72 | S&F PVC Connection Pipe 15mm size and 45 Cm in length with Adopter Nuts of PVC and fixed-in-repairs, complete all as specified and as directed. MAKE : PRAYAG CAT No. 324 / POLYTUFF |
| 73 | S&F Health Faucet with Wall Hook, Chromium Plated having 1.00 Metre long with PVC Hose Pipe and fixed in repairs, complete all as specified and as directed.MAKE : JAQUAR ALD-CHR-585 or equivalent in GEM/ MARC (as approved by GE). |
| 74 | S&F of transparent toughened glass 10mm thickness and its fitting as required including self adhesive film shade as directed by Engr-in-chrg make Saint Gobain or Modi equivalent |
| 75 | M&L for of transparent toughened glass door of 10mm thickness and its fitting as required including stainless steel L connector 75mm wide on bothside with PVC acrylic sheet inside and fixing with SS 304 grade screw as required and Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with SS 304 grade cover, governing pivot made of brass, other parts made of mild steel heavy duty , SS 304 grade D type circular handle of 450mm length and 25mm dia with locking arrangement of SS 304 grade lock, self closing hydarulic stainless steel 304 grade top/bottom patch with pivot and self adhessive film shade as required for complete all as specifed and as directed by Engr -in-Charge |
| 76 | M&L for PCC (1:2:4) type B1, (using 20mm graded crushed stone aggregate) as in cement concrete in roof kerbs or mud stops, rounded or chamfered on edges. |
| 77 | M&L for preparation of new surface of any description and applying two coats of synthetic enamelled paint over a coat of red oxide primer on steel surface over 10cm width or girth complete all as specifed. |
| 78 | M&L preparing old Treated/Painted Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed. |
| 79 | Taking up or down galvanised steel water tubing 15mm bore fixed to walls or laid under floors or in any other position along with required connections including cleaning for re-fixing or renewal from site etc complete all as specified and directed by Engineer-in-Charge. |
| 80 | Ditto but 20mm bore complete all as specified and directed by Engineer-in-Charge. |
| 81 | Supplying and laying of 15mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete all as specified and directed by Engineer-in-Charge. |
| 82 | Ditto but 25mm bore pipe complete all as specified and directed by Engineer-in-Charge. |
| 83 | M&L for 15 mm thick plaster in CM (1:4) mixed with water proofing compound on roof slabs finished even and smooth without using extra cement after cleaning of roof surfaces with wire brushes complete all as specified and directed by Engr-in-Charge. Notes : WPC shall be measured and paid seperately |
| 84 | M & L for applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg/Sqm including cleaning surface complete as all specified and as directed |
| 85 | M&L for water proofing treatment with polymeric water proofing membrane as under :-Supply and laying five layer prefabricated Atactic polypropylene Polymer (APP) modified membrane of 3mm thick membrane (Weight not less than 3 Kg/Sqm) reinforced with 160gsm polyster non woven fabric with two coat of water proofing paint with alumnium finish on top including overlapping as per manufacturers instruction.Note : APP membrane shall be laid on primed surface by Torch application method after allowing 24 hrs for Primer to dry. On Accesible roof where Brick tile is laid APP membrane shall not be painted. |
| 86 | M & L for Hydraulically pressed PCC tile plain of size 200x200x19/20mm machine made laid over & including cement mortar screed 15mm thick in CM 1:6 mixed with water proofing compound and jointed pointed in CM 1:3 mixed with 5% crude oil by weight of cement. |
| 87 | Designing providing and fixing 3mm thick Aluminium Composite Panel Cladding over RCC/Brick surfaces either segmental/straight in plan wherever specified with extruded aluminium U sections, angle, cleats, weather silicon sealants, backer rods of required size stainless steel screws, rivets, brackets, drilling and fixing the cladding to either masonry or reinforced cement concrete including repairing of wall with plaster CM 1:4 where required to fix aluminium setion as the case may be manufacturer's specifications, complete the work in all respect including all necessary accessories. At all soffits aluminium cladding shall be bend 90 degree and joints at corner or edges will not be acceptable. On horizontal surface, the size of sheet should be maximum available of size complete all as per manufacturer's specifications and as directed. |
| 88 | M&L and applying designer Plaster of Paris (POP) false ceiling consisting of frame work made with 50 mm square MS tube of 18 Gauge thickness as main runner at 600 mm c/c both ways suspended/supported with MS flats 25x4 mm from existing RCC slab including providing and fixing expanded metal of size 5.25mmx1.25 mm thickness welded to main runner and applying POP (Plaster of Paris) to the expanded metal of thickness not less than 10 mm finished smooth to line and level and applying two coat of plastic emulsion paint design as approved by Engr-in-Charge with necessary support scaffolding etc as required and including applying a coat of red oxide zinc chromate primer over the MS frame work and also including fixing of ceiling lights as per size of ceiling and all as per direction of Engr-in-Charge. |
| 89 | Dismantling damaged/unserviceable GI Snap Grid Ceiling Frame Work with Ceiling Boards/wall panelling of any description, complete all as specified and as directed. |
| 90 | S&F GI Powder coated GI Snap Grid Frame Work of size 605x605mm as in False Ceiling with supported hanging of Mild Steel Rod of 'J' Bolt, complete all as specified and as directed. |
| 91 | M&L for 12 mm thick perforated particle board/ tiles for insulation and accoustic purposes, 60x60 cm in size,fixed with nails or with staple in ceiling/ timber frame complete all as specified. |
| 92 | Excavation in trenches, not exceeding 1.5 M wide, and not exceeding 1.5 M in depth for foundation etc and getting out in soft/loose soil complete all as specified and as directed. |
| 93 | Returning & filling of the excavated earth including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils. complete all as specified and directed |
| 94 | Removing Excavated soils n. exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point. complete all as specified and directed |
| 95 | S&F Aluminium Barrel Tower Bolt 150mm long (weight not less than 210 Gram), extruded section, complete all as specified and as directed |
| 96 | S&F Aluminium alloy, anodized, Sliding Door Bolt 200mm long with Hasp Staple (Bolt type) and Fixing Clips of Sheet cast or extruded section and fixing Bolts and Sliding Bolts of extruded section and fixing, complete all as specified and as directed. |
| 97 | S&F Stainless Steel Butt Hinge of size 100mm (weight not less than 80 Gram), complete all as specified and as directed. |
| 98 | S&F Extruded Aluminium alloy Handle 150mm long (weight not less than 120 Gram), Fabricated type, anodised, complete all as specified and as directed. |
| 99 | S&F Door Closer Aluminium (Die Cast) Body, hydraulically regulated, Designation No. 3, Universal type, suitable for Door Shutters of 851mm to 1000mm in width and of weight between 61.00 to 80.00 Kilogram and fixed-in-repairs, complete all as specified and as directed. |
| 100 | S&F Sheet Glass 5.0mm thick, Tinted/frosted (as approved by GE) fixing to Aluminium door / Window including replacement of Rubber Packing, Aluminium Beading, complete all as specified and as directed.NOTE : Cost of Rubber Packing shall deem to be include in the Quoted Unit Rate. |
| 101 | M&L 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement |
| 102 | M&L PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement |
| 103 | M&L factory made Aluminium powder coated Frame for Doors, Windows, Ventilators, Partitions, etc. having Powder Coating (minimum thickness of Powder coating 50 micron) with one or more rebates including Joining Cleat for fixing, etc., complete all as specified and as directed. |
| 104 | S&F factory made Aluminium powder coated door/Window Double Shutters Glazed and Gauged of Stainless Steel Wire Cloth having nominal dia of Wire 0.36mm and average width of aperture 1.40mm along with Aluminium Section with 50 micron anodizing size of Frame 125x44.5mmx16 gauge having size of Shutter, Top/ Bottom/central Rail shall be 44.5x44.5mm x16 gauge Aluminium Section with 50 micron anodizing and 5.5mm thick Black/ Tinted Sheet Glass to be fixed on Glazed Portion including Aluminium Grill and Stainless Steel Hooks and Eye to be provided as stay of Shutters, etc. complete including necessary Jointing Cleats, Glazing Clips, Rubber Packing, Aluminium Snap Beading, Screws anodized Aluminium Fittings such as Peg Stay 150mm long (1 No. for each Leaf), Hinge Type B-21 of 100mm long (2 No. for each Leaf), suitable Handle (1 No. for each Leaf) and 100mm Aluminium Tower Bolts (2 No. in each Leaf), complete all as specified and as directed.NOTE : Cost of Black/Tinted Sheet Glass, Stainless Steel Wire Cloth, Jointing & Packing Materials, anodized Aluminium Fittings, etc. shall deem to be include in the Quoted Unit Rate. |
| 105 | S&F Coloured PVC Board 18 mm thick as required in Door, Shelves for Cup Boards or Kitchen Cabinets, one side laminated, one side plain , density 600 kg/cum jointed by means of PVC Adhesive Solvent and fixed using Self-tapping Aluminium Screws,including Locking Arrangements, complete all as specified and as directed.Make : Rajshree, Centuryply, sintexplastic |
| 106 | S&F Frog hinges/slip on cabinet hinges by making adequate hole in 18 mm board from inside and fixed to cupoard shutter and frame by screw, complete all as specified and as directed. |
| 107 | S&F Stainless Steel Silver chrome Door Handle 100mm long, suitable for fixing of Brass screws inside of the board etc, complete all as specified and as directed. |
| 108 | M&L for point wiring complete with 1.5 Sqmm (nominal area) PVC insulated, multi stranded, FRLS copper conductor cable unsheathed in and including PVC conduit with all fittings medium grade ISI Marked and PVC insulated FRLS copper conductor cable of size 1.5 sq mm as earth wire, connected to common earth dolly suitable for mounting modular switches including modular metal flush boxes and modular face plate complete all as specified and as directed by Engr-in-charge, (The works includes cutting of chasis and making good disturbed surfaces and rate deemed to included in quated rate):- |
| 109 | (a) One light point /Bell point/Fan point controlled by one switch with cable 1.5 Sqmm size all as specified and directed |
| 110 | (b) One light point point controlled by two 2-way switchs with cable 1.5 Sqmm size all as specified and directed |
| 111 | (c) One 3 pin socket outlet 5 Amps on Same board including singal core multi-stranded copper conductor 1.5 sqmm PVC insulated and unsheathed cable drawn in same conduit as earth wire to the common earth and connecting to earth duly all as specified |
| 112 | (d) One 5 pin socket outlet 5/6 Amps on independent board including singal core multi-stranded copper conductor 1.5 sqmm PVC insulated and unsheathed cable drawn in same conduit as earth wire to the common earth and connecting to earth doily all as specified |
| 113 | (e) Ditto- but with cable 2.5 Sqmm and earth continuity conductor of 2.5 Sqmm multi-stranded copper unsheathed complete all as specified and as directed. |
| 114 | (f) Ditto- but with cable 4 Sqmm and earth continuity conductor of 4 Sqmm Multi-stranded copper unsheathed complete all as specified and as directed. |
| 115 | Supply and fix switch piano type one way 6 Amps flush type ,240 volt AC all as specified and directed. |
| 116 | Supply and fix switch piano type one way 16 Amps flush type ,240 volt AC all as specified and directed. |
| 117 | Supply and fix socket 2 in 1, 3/5 pin, 6 and 16 Amps flush type ,240volt AC all as specified and directed. |
| 118 | Supply and fix socket outlet 2 in 1 ,3 pin 6 Amps all as specified and directed. |
| 119 | Supply and fix switch piano type two way 6 Amps flush type ,240volt AC all as specified and directed. |
| 120 | S & Fix stepped type electronic fan regulator flush type. |
| 121 | Refixing of existing LED Tube Light fittings with flaxiable copper twisted twin core complet all as specified and directed. |
| 122 | Supply and fix ceiling rose surface bakelite with three terminals complete all as specified and directed. |
| 123 | Supply & Fix Double pole Sheet matel enclosure box with a two pin and earth plug and socket complete with singal pole MCB 20 Amps all as specified and directed. |
| 124 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete |
| 125 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete |
| 126 | Supply, Installation ,commissioning and testing invertor type BEE 5 star rating air cooled split unit air conditioner electric driven single phase of capacity 1.5 TR, Eco friendly refrigerant, hi wall split units indoor and outdoor unit complete with cordless remote control unit and with inbuilt air ioniser and plasma filter for better indoor air quality with 5 star rated, auto restart facility,100% copper tube and condenser including excess copper tubing if required beyond the lenght 7.5 mtrs supplied with AC unit and PVC conduit of 15mm dia not exceeding 2.5 mtr long for water drain including drilling hole through drill machine and making good to disturbed surface with cement mortar ratio 1:3 to match the existing surface complete all as specified and directed by Engineer - in-charge. |
| 127 | Supply and fix Voltage stabilizer for automatic operation, single phase, copper wound naturally air cooled indoor type & designed for input variation between 150 V to 280 V with output voltage stabilized at 230 V with accuracy of ± 2.5% suitable for 1.5 Ton AC operation complete all as specified and directed. |
| 128 | S & F sheet metal enclosures for double door distribution board factory made duly painted 8 way SPN and neutral 240 v with 200 amps rated bus bar , suitable for fixing MCB /Isolators all as specified and directed. |
| 129 | Supply and fixing miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP240V, 10 KA 'B' curve , in the MCB DB Complete with connection testing and commissioning all as specified and directed.. |
| 130 | Supply and fixing miniature circuit breaker (MCB) of SPN and current carrying capacity 40 Amps 240V, 10 KA 'B' curve , in the MCB DB Complete with connection testing and commissioning and including taking down complet all as specified and directed. |
| 131 | Supply and fixing MCCB 100 Amps, TPN, Breaking capacity 16 KA, 415 V 'B' curve adjustable type all as specified of capacity |
| 132 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mmsweep with, blades, and frame and louvers |
| 133 | S&F submain wiring with sheathed multi-stranded FRLS Grade copper conductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 25mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 4 Sqmm single core and one runs of 4 Sqmm PVC insulated copper conductor for earth continuity wire between Sheet matel enclosure box to Sub main DB complete all as specified and as directed.Note :- 1.Two run of single core cable with one run of earth continuity conductor and PVC conduit and accessories will be measured as one length including cutting chasing in wall complete.Note 2: Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit. |
| 134 | Supply and laying XLPE insulated screened PVC bedded. Galvanized steel strip or wire armoured ,electric power cable(heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sqmm 4 core complete incl straight or end joints all as specified and as directed. Note: Excavation and Earth works shall be measured & paid separately |
| 135 | Excavating in trenches n exc. 1.5 m wide and n. exc 1.5 m in depth, foundation etc for shafts, well, cesspits , manholes, pier holes etc n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft soil complete all as specified and directed by Engineer-in-Charge. |
| 136 | Material and labour for Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm complete all as specified and directed by Engineer-in-Charge. |
| 137 | Removing excavated material n.exc 50 M and depositing where directed at a level n.exc 1.5 M above starting point complete all as specified and directed by Engineer-in-Charge. |
| 138 | M&L for sand cushioning in trenches for protection of LT under ground cable including punning and consolidation complete as sepecified and directed by Engr-in-Charge. |
| 139 | Supply and laying well burnt sub class ‘B’ bricks, locally available in trenches for protection of underground cable complete as sepecified and directed by Engr-in-Charge. |
| 140 | M & L for trenchless boring under roads/ crossing or fixed to wall/ pole, GI tubing light grade of size upto 150mm bore for protection of UG cables complete all as specified and as directed. |
| 141 | Supply and fix Water heater storage type (Geyser) of capacity 25 litres including necessary connection complete with grouting bolts and nuts complete all as specified. |
| 142 | M & L for earthing complete in repairs with galvansihed steel earth plate electrode 600 mm x 600 mm x 6.3 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level connected to 4.0 mm dia galvansihed earth lead wire by means of nuts bolts check nuts and GI washers including PCC pit in PCC 1:2:4 type B-1 RCC cover 20 mm dia (medium grade) GI watering pipe with funnel wire mesh and protection pipe of GI of suitbale size upto 7.5 mtr length including charcoal black cotton soil as required at site to achieve the earthing result and common salt, excavation earth work etc in any type of starta complete all as shown in electrical plate No 3 as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 07, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayJul 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender