Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Building Works (B&R):Taking up or down 15 mm dia steel tubing and Connections,including cleaning for refixing or removal to store in wall, ceiling or floor etc complete all as specifed and as directed. |
| 2 | All as per item no 1 here in above but 20 mm dia of pipe complete all as specifed and as directed. |
| 3 | Supply and fix 20 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings, elbows, tee,adapters, union on walls/ceiling or laying in floors complete all as specified and as directed. |
| 4 | Supply and fix 25mm dia CPVC pipes SDR 11 plain CPVC SDR 11 celing, elbow, tees adapters, uinion on walls/ceiling or laying in floors complete all as specified and as directed. |
| 5 | Supply and fix gate valves 25 mm dia with iron wheel head, screwed both ends for fixing to iron pipe complete all as specified and as directed. |
| 6 | Material and labour for Cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, shelves complete all as specified and as directed. |
| 7 | Taking down (Steel/ Wooden) frame any description exc. 1.5 sqm but not exc 4 Sqm each (with out taking off shutter from the frame) including hardware fittings complete all as specifed and as directed. |
| 8 | All as per item No 7 here in above but n exc. 1.5 sqm each with shutters and hardware fittings complete all as specifed and directed. |
| 9 | Material and labour for 2nd class hard wood factory made glazed/skeleton shutters 35 mm thick open rebated prepared to receive glass, gauze divided in squares with plain, chamfered or rounded, mitred and rebated sash bars any number with plain, chamfered or rounded, mitred and rebated beads for securing glass gauze etc complete all as specified and directed. |
| 10 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type(Approved any design and pattern) flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and making edges are lipping with edge tapes and fixing with butt hinges with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed. |
| 11 | Supply and fix mild steel not more than 300mm, ordinary rat tail rod pattern door springs including roller and roller plate complete all as specified and as directed. |
| 12 | Supply and fix pressed steel frame made out of MS sheet 1.25mm thick of size 125mmx60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and including two coats of synthentic enamel paint complete all as specified and directed. |
| 13 | All as per item 12, here in above but frame/chowkhat size 100mmx60mm complete all as specified and as directed. |
| 14 | All as per item 12, here in above but frame/chowkhat size 75mmx50 mm complete all as specified and as directed. |
| 15 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116mm x 45 mm & sash 46 mm x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made complete all as specified and as directed. |
| 16 | Providing and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners for area of wondow not exceeding 1 sqm and including Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass complete all as specified and as directed.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured forpayment purpose complete all as specified and as dirtected. |
| 17 | Supply and fix sheet glass of ordinary quality 5.5 mm thick and glazing complete with beads fixed with screws in aluminium shutter square n. exc 0.5sqm in each pane complete all as specifed and as directed. |
| 18 | Supply and fix Figured glass, pin head type, 5 mm thick and glazing complete with beads fixed with screws in aluminium shutter square n. exc 0.5sqm in each pane complete all as specifed and as directed. |
| 19 | Supply and fix stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples, including fixing in aluminium side hung window shutters complete all as specifed and as directed. |
| 20 | Supply and fix Powder coated aluminium grills (Pattern DG-102 with weight, not less than 3.131 Kg/sqm) for windows, ventilators, etc., including joining cleats,beadings etc complete all as specified and as directed. |
| 21 | Supply and fix factory made both side pre laminated 18mm thick lead free 100% solid WPC(wood polymer composit) sheet for cupboard shutter having high natural fiber contant 25 to 30 % wood colour sheet with density not less than 600 kg /Cum and WPC to be laminated with PVC foil of min 14 micron thick of approved design incl 100% termite/water proof, fire retardent, Eco friendly, and finish at all edges at level for making edges lipping using binding tape etc as in Kitchen cupboard,Cabinet etc . complete all as specified and as directed. |
| 22 | All as per item no 21 here in above but one side prelaminated for partitions,boxes and drawer complete all as specified and as directed. |
| 23 | Material and labour for Zinc finished telescopic drawer channel 24 inch long, ball bearing slide for kitchen cabinets and wardrobe complete all as specifed and directed |
| 24 | Supply and fix Magnetic catcher as approved by GE, fixed with Nut and bolt complete all as specified and directed. |
| 25 | Supply and fix factory made solid PVC moulded flush door shuuter with wood free EPS, 30mm thick (Style) with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm thick plain colour PVC sheet on back face, supplying and fixing in frame at site complete all as specified and as directed. |
| 26 | Supply and fix for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube supply and fixing as per specification and drawing complete all as specified and as directed. |
| 27 | Supply and fix 100 mm long stainless steel butt hinges with stainless steel screw and fixed complete all as specifed and as directed |
| 28 | Supply and fix extruded aluminium alloy handles of size 150mm fabricated type and fixed complete all as specifed and as directed |
| 29 | Supply and fix continuous (piano) hinges mild steel, 40mm width of flaps (when open) , bright finish or electrogalvanised for kitchen cabinet complete all as specified and as directed. |
| 30 | Supply and fix aluminium anodised barrel tower bolts of extruded section 150 mm long and fixed complete all as specifed and as directed |
| 31 | Supply and fix aluminium anodised barrel tower bolts of extruded section 200 mm long and fixed complete all as specifed and as directed |
| 32 | Supply and fix aluminium anodised 300 mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of stainless steel and fixed complete all as specifed and as directed |
| 33 | S&F stainless steel handle(fancy type) of size 150 mm and fixed complete all as specifed and as directed |
| 34 | Supply and fix Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring 150mm long and fixed complete all as specifed and as directed |
| 35 | Material and labour for PCC type C1, 1:3:6 (using 20 mm graded agg) as in coping , PCC block for fixing of hold fast, sanitary fittings etc., complete all as specified and as directed. |
| 36 | Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each complete all as specified and as directed. |
| 37 | Supply and fix Magic Door Eye 180 Degree view high quality Mounting Diameter : 14 mm and head diameter 35 mm ( Material : Alloy, Color : Gold ) fixed in position of shutter complete all as specified and directed. |
| 38 | Dismantling floor hearth or wall tiling including cement mortor bedding (but not backing) removing the rubbish of the premises complete all as specifed and as directed. |
| 39 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing rubbish outside the MoD land complete all as specified and as directed. |
| 40 | Material and labour for cement concrete type B-0, 1:2:4 (using 12.5 mm graded aggregate), 25 mm thick as in floors finished rough for floor finishes complete all as specifed and as directed. |
| 41 | Material and Labour glazed ceramic coloured tiles in vertical surfaces 450 x 300 x 6-7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10mm thick backing coat in cement mortar 1:4, complete all as specified and as directed. |
| 42 | Material and Labour Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm (joint free)(square/ rectangular) in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and as directed. |
| 43 | All as per item No 42 here in above but as in skirting/dado including 10 mm thick backing coat in cement morter 1:4. complete all as specified and as directed. |
| 44 | Material and labour for joint free non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in coloured cement over 15 mm thick screed bed in cement mortar 1:6 complete all as specifed and directed |
| 45 | Material and labour for Rendering 10mm thick in Cement Mortar 1:3 mixed with and including water proofing compound to sunken portion with proper slope towards outside and finishing cement concrete or brick work at a rate of 3% by weight of cement finished even and smooth with out using extra cement, complete all as specified and as directed.Note:- Water proofing compound shall be measured and paid separately under relevant item as \\"supply only.\\" |
| 46 | Material and labour for Cement concrete type E2, 1:5:10 (using 40mm graded aggregate) in filling mass concrete as in sunken floor complete all as specified and as directed. |
| 47 | Supply and fix 40mm bore HDPE pipe as in spout pipes in sunken floors complete all as specified and directed. |
| 48 | Material and labour for applying Nitoproof 600 PF or equivalent approved product minimum 0.8 mm dft over a priming coat on horizontal and vertical surfaces all as manufactures instruction as in sunken slab surfaces complete all as specified and directed.(NOTE:- After the application of above treatment contractor fill the sunken slab surface with water and check for dampness and seepage . In case there is a slightest indication of seepage is noticed, the same shall be rectified by injection grouting to seal all cracks or application of polymer modified mortar FOSROC Nitobond SBR of equivalent approved product admixed with the integral WPC or cementitious crystline waterproofing compound in the affected area to seal all cracks and micro cracks if any and additional coat of Nitoproof 600 PF .This shall be done by contractor at his own cost only and rate is deemed to be included in the rate quoted by the contractor. |
| 49 | Providing and applying HS TPO membrane of 1.2mm thick over the layer of 200gsm Geo-Textile with overlap joints of 75 mm in both longitudinal and transverse direction of the TPO and sealed properly with hot air welding and terminate TPO at the top of parapet wall with termination strip and fix it by screw at 300 mm c/c and sealed with HS Jointseal PU on top including surface preparation like remove all loose gravels,dirt,oil,grease,and other foreign particles by jet or dry air and clean the surface mechanically or by grinding to make it smooth before application and PCC / cementitious coving of 75 mm radius shall be provided at all junctions between vertical and horizontal faces before application of TPO complete all as specified and as directed.Note:- work to be carried out by authorised applicator of M/S Asian or equivalent company. |
| 50 | Material and labour for cement concrete type B1, 1:2:4 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair without using extra cement includling making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified and as directed. |
| 51 | Material and labour for RCC type B1, 1:2:4 (using 20mm graded stone aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed |
| 52 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work rough finished surfaces of concrete; not exceeding 200mm thick complete all as specified and as directed. |
| 53 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed. |
| 54 | Material and labour for Reinforcement 10mm dia and over TMT bars cut to length, bent to shape required including cranking, bending spirally for hooping, hooking ends and binding with including MS wire annealed (not less than 0.9 mm dia) and securing with clips fixing as rungs for climbing up to the roof top. complete all as specified and as directed. |
| 55 | All as per item No 54 above but 6mm to 8mm dia. complete all as specified and as directed. |
| 56 | Supply and fix Rotational moulded polyethlene water storage tanks of capacity 500 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 25mm dia ball brass valve high pressure with polythene float including suitable nipple and dismantling&lowering of existing RCC/ PVC tank of any capacity with and including removal of rubbish outside MoD land complete all as specified and as directed. |
| 57 | Supply and fix in repair Vitreous china Ceramic countersunk Wash Basin Glossy Finish of White Color for Bathroom size 550 x 400x200mm including waste pipe , brackets ,PVC connection and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia PVC waste pipe fixed in repair including waste copling 32mm size full thread , complete all as specified and as directed. |
| 58 | Supply and fix in repair viterous china WHB with Pedestal patttern of size 460x350mm including GI Brackets, 32 mm CP brass waste coupling with check nut and washers, PVC conncetion and waste pipe of suitable size complete all as specifed and directed Make Prayag cat part No 4656/ Jaquar/ Parryware/ CERA/ Hindware or equivalent complete all as specifed and directed. |
| 59 | Supply and fix in repairs stainless steel kitchen plate rack of size 750 x 900 mm of approved make fixed with mild steel screw complete all as specified and as directed. |
| 60 | Supply and fix in repair 20-25 mm bore stainless steel curtain rod ( wall thickness not less than 1mm) with approved finials and fixing brackets ,stops, rollers etc complete all as specified and as directed. |
| 61 | Supply and fix Brass CP 3-in-1 wall mixer for mixing hot & cold water including CP telescopic and 125mm size brass chromium plated shower rose over head shower L bend tube and fixing accessories screwed down for iron pipe and fixed complete all as specified and directed. Make: Prayag cat part No 8080 / Jaquar/ Parryware or equivalent |
| 62 | Supply and fix in repair 15 mm bore CP Bib tap long body cast copper alloy fancy type with suitable flanges crutch or butterfly handles screwed down for iron or for brass ferrule Make Pyayag cat part No 8208/ Jaquar/ Parryware or equivalent complete all as specifed and as directed. |
| 63 | Supply and fixing in repair Kitchen sink tap chromium plated finish dual flow pattern with silicon clack flexible hose swivel type for 15mm dia bore of pipe complete all as specified and as directed. |
| 64 | Supply and fixing in repair 15 mm bore pillar taps cast copper alloy fancy type chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed.Make: Prayag cat part No 6302-N / Jaquar/ Parryware or equivalent |
| 65 | Supply and fixing in repairs 15mm bore angular stop cock, chromium plated , fancy type, with suitable flanges screwed for iron pipe or brass ferrule, and fixed in repairs complete all as specified and as directed Make: Prayag cat part No PR-544 / Jaquar/ Parryware or equivalent |
| 66 | Supply and fixing in repair 15 mm bore ,2 way CP Bib tap long body cast copper alloy fancy type with suitable flanges crutch or butterfly handles screwed down for iron or for brass ferrule Make Prayag Cat part No 6512 / Jaquar/ Parryware or equivalent |
| 67 | Supply and fix in repair brass chromium plated tubalar towel rail 20mm dia D type 60cm long between flanges with chromium plated bracket and fixed complete all as specified and as directed Make Pyayag/Jaguar or equivalent |
| 68 | Cutting holes in brick walls in cement mortar for inserting GI pipe and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required exc half brick but n.exc one brick depth of embedded portion from the face of the jamb complete all as specifed and as directed. |
| 69 | Supply and fix in repairs PVC flushing cistern of 10 litres capacity, low or high level with valveless syphonic action and float value, pull knob including brackets, PVC connection, PVC flush pipe 32 mm dia etc., complete all as specified and as directed.Make: Prayag cat part No 501/Jaquar/ Parryware/ CERA/ Hindware |
| 70 | Supply and fix in repairs Vitreous china wash down water closet pan (Pedestal pattern) white 'P' trap (excluding fixing bolts, flushing cistern and flush pipe), and fixed in position in repairs complete all as specifed and as directed. Make: Prayagcat part No 4019 /Jaquar/ Parryware/ CERA/ Hindware |
| 71 | Supply only PVC Water closet Seat Cover white or Black closed pattern with flat bottom and cover with PVC, aluminium or MS cromium plated hinge devises etc including fixing in repair complete all as specified and as directed Make: Prayag cat part No-514 /Jaquar/ Parryware/ CERA/ Hindware |
| 72 | Supply and fix in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 73 | Material and labour for PVC (SWR) floor trap, dia of outlet 75mm plain with grating, including jointing, with solvent cement complete all as specifed and as directed. |
| 74 | Supply and fix PVC (SWR) Soil, Waste and Vent Pipe 75mm bore (dia), Single Socketed, in any length with Rubber Ring Joint fixed to Wall with suitable clamps or Laid in Trenches etc., including Taking down/up unserviceable Pipe, complete all as specified and as directed. |
| 75 | All as per Item above 74 here–in–before but 110mm bore (dia). complete all as specifed and as directed. |
| 76 | PVC (SWR) 75mm bore (dia), Bends, any radius with access door and Jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed. |
| 77 | All as per Item no 76 here–in–before but 110mm bore (dia). complete all as specifed and as directed. |
| 78 | PVC (SWR) 75mm Bore (dia), Branch Piece, Single (Single Y) Equal or Unequal with access door and Jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed. |
| 79 | All as per Item no 78 here–in–before but 110mm bore (dia). complete all as specifed and as directed. |
| 80 | Supply and fix PVC (SWR) vent cowl, size of bore 75mm complete all as specifed and as directed. |
| 81 | Supply and fix PVC (SWR) vent cowl, size of bore 110mm complete all as specifed and as directed. |
| 82 | Supply and fix Chromium plated soap dish Cat part No T6902A1 complete all as specified and as directed |
| 83 | Taking down Cement Plaster, any description on Brick Walls or on Concrete Surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc, and removing same from the Site(s), complete all as specified and as directed. |
| 84 | Material and labour for Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar in two layers in CM 1:4 (5mm finishing layer over 10mm base layer) Finishing layer of 5mm thick in Cement Mortar 1:4 mixed with water proofing compound at a rate of 2% by weight of cement complete all as specified and as directed.Note :- Water proofing compound shall be measured and paid separately under relevant item as supply only |
| 85 | Material and labour for Rendering 10mm thick on fair faces of Brick Work or Concrete Surfaces in Cement Mortar 1:6, and finished even and Smooth without using Extra Cement, complete all as specified and as directed. |
| 86 | Material and labour for Rendering 5 mm thick in Cement Mortar 1:3 on concrete surfaces on ceiling finished even and smooth without using Extra cement complete all as specifed and as directed. |
| 87 | Material and labour preparation of new wooden surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed |
| 88 | Material and labour for preparation of newly plastered ceilling and applying Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification two or more coats over a coat of primer over 1 mm thick interior putty complete all as specifed and as directed. |
| 89 | Material and labour for complete removal of existing treatment and washing, rubbing down and stopping of distempered and painted surfaces plastered ceilling and applying Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification two or more coats over a coat of primer and over one mm thick interior putty complete all as specifed and as directed. |
| 90 | Material and labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm and over one mm thick exterior putty over new surfaces complete all as specified and as directed |
| 91 | Material and labour for complete removal of plastered surface of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm and over one mm thick exterior putty on old prepared surfaces complete all as specified and as directed |
| 92 | Material and labour for preparation of newly plastered wall and applying Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification two or more coats over a coat of primer and over one mm thick interior putty complete all as specifed and as directed. |
| 93 | Material and labour for complete removal of existing treatment and washing, rubbing down and stopping of distempered and painted surfaces plastered wall and applying Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification two or more coats over a coat of primer and over one mm thick interior putty complete all as specifed and as directed. |
| 94 | Material and labour writing letter or figures (Block, Roman, Italic or Indian) n exc 30 cm high for and the colour of paint and dimension of letter to be used complete all as specifed and as directed. |
| 95 | Material and labour for writing Stops, commas, short lines, dashes,hyphen brackets etc and the colour of paint and dimension of characters to be used complete all as specifed and as directed. |
| 96 | Material and labour for complete removal of existing WPT course (i.e) bituminous felt broken tiles mud phaska including removing grown vegetation roots etc or any other kind of treatment surface over roof slab and removing loose mortar & dust particles until to reach sound surface by using mechanical or manual tools and attending the cracks , holes like as weak points by using manufactures instruction .Providing and Laying polymer concrete by adding crystalline internal membrane admixtures by the ratio of (1 bag cement = 500gms crystalline admixtures ) making hunch surface 100mm x 100mm of floor & wall joint area. The surface to be cleaned free from oil grease,wax,dust and other barrier materials.The entire area applied primer as a base layer and over the top placing Fiber mesh & applied entire floor & around wall 1 ft area two coats of water based, UV resistant Elastomeric PU liquid membrane waterproofing coating with required time intervals by using brand ShaliUrethane-BTD.Dilute ShaliUrethane® BTD with water @ 1:1 ratio and use as primer @ 400 gm / m².Apply 1st coat of ShaliUrethane® BTD @ 1 kg (or 0.8 kg) / m² by brush / roller / airless spray while the primed surface is tacky. For faster and smoother application, apply with airless gun. Spread Non-woven Geo-textile fabric or Fiber Glass Tissue / scrimp of 45 GSM with overlaps of 50 mm in both directions when the surface is still tacky; this is optional, to be assessed as per site requirements to achieve higher mechanical properties. Apply 2nd coat of ShaliUrethane® BTD @ 1 kg (or 0.8 kg) / m² by brush / roller / airless spray for final DFT of 1200 micron in two coats (for 1000 microns DFT apply 0.825 kg / m² / coat) complete all as specified and as directed. |
| 97 | Material and labour 25 mm thick (average) plain cement concrete type B-0, 1:2:4, (using 12.5mm graded stone aggregate) bring up to the slope to 1 in 75 by providig light weight meterials such as cinder light weight concrete etc as required complete all as specifed and as directed. |
| 98 | Material and labour for Rendering 5 mm thick in cement mortar 1:3 mixed with water proofing compound at the rate of 3% by weight of cement on roof surfaces while concrete is green complete all as specifed and as directed.Note:- Water proofing compound shall be measured and paid separately under relevant item as \\"supply only\\". |
| 99 | Supply only integral water proofing compound complete all as specifed and as directed. |
| 100 | Material and labour for Post constructional Antitermite treatment, along external wall below concrete or masonary apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron complete all as specifed and as directed. |
| 101 | Material and labour for Post constructional Antitermite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specifed and as directed. |
| 102 | Material and labour for as in repairs 18-20mm thick Granite slab work of machine cut single piece, mirror polished, premoulded and prepolished, as in side and top of vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc (providing suitable hole for LPG pipe line for cooking platform) and including taking down of existing any type of tiles/granite of any description complete all as specified and as directed. |
| 103 | Material and labour green Marble work 18-20mm thick (table rubbed and polished) single piece in cooking plateform, window cill, steps, stair case trade etc in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Bhaislana Zebra laid over and including 15mm thick screed bed in CM 1:4 and roughening the old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed. |
| 104 | All as per item No 103 here in above but for risers/skirting complete all as specifed and as directed. |
| 105 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specifed and as directed. |
| 106 | Supply and fix in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed |
| 107 | Supply and fix in repair sheet glass assembly of size 18x5.5 inches, consisting of chrominium plated bracket guard and railing complete all as specified and as directed.Make:- Jaquar, cera ,hindware Prayag. |
| 108 | Supply and fix fancy type frameless looking mirror of size 600mmx450mm of bevelled edge mirror made out of selected quality glass of 6mm thick on stainless steel brackets & stainless steel fancy screws & locking washers at 04 corners fixed to wall surface with requisite fitting arrangements complete all as specified and asdirected. |
| 109 | Supply and fix for 8 feet 4 pipes pulley operated cloths drying system consisting of aluminium pipe of outer dia 22mm, inner dia 19.80mm, made up of detrin with rope guide mounted on channel pair of length 24 feet (distance between two pipes is adjustable) locking system to hide rope knot, channel to be mounted or fixed with self taping screws provided in kit. Rope will be HDPE double core of 4mm dia fixing to ceiling as specified and directed by Engr-in-Charge and minimum weight of one pipe shall not be less than 0.20kg/mtr, minimum weight of rope shall not be less than 7700Gms/unit. complete all as specifed and as directed. |
| 110 | Supply and fix framed work such as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled/ welded for fixing of steel sheeting, hinges or other covering fixing complete with Fe-410-W (Gde-E-250-quality-A) complete all as specifed and as directed. |
| 111 | Material and labour for preparation of new steel surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specifed and as directed. |
| 112 | Material and labour for applying one coats of synthetic enamel paint including preparation of old steel surface of grith exc 10 cm etc complete all as specifed and as directed. |
| 113 | Removing/taking down of old deteriorated plaster surface from Chajja/lintel/fins/facia and the like, fixing of Chicken wire mesh with staples or nailing, after cleaning the surface, apply a coat of cement slury, 10 mm thick rendering in two layers in Cement Mortar 1:4 mixed with water proofing compound at a rate of 3% by weight of cement including finished even and smooth with out using extra cement, and match the surface with existing including neccesry formwork and scafolding arrangements at a height of bldg G+2 level complete all as specified and as directed. Note :- Water proofing compound shall be measured and paid separately under relevant item as supply only |
| 114 | Demolition of reinforced cement concrete of any description and in any position and removal of debris to a distance not exceeding 100metre and deposited complete all as specifed and as directed. |
| 115 | Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet (fixed in machine made curved shape)0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specifed and as directed. |
| 116 | Supply and fix steel work in tubular trusses i.e. Truss bottom, top bend, sides, side supports, holding plates, posts and base plate etc (machine made curved shaped structure) shape of including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specifed and as directed. |
| 117 | Demolition of old brick works built in cement mortar as in drain, manholes, walls etc and removal of debris to a distance not exceeding 50 metre and deposited complete all as specified and as dirtected. |
| 118 | Material and labour Fly Ash Brick with fly ash bricks straight or curved on plan to any radius in half brick thick walls in cement mortar 1:4 complete all as specified and as directed. |
| 119 | Material & Labour for Brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in CM(1:4) of any description complete all as specified and as directed. |
| 120 | Road/Path/Culvert: Material and labour for Approved coloured Chequered cement concrete tiles 30cm x30cm x 25mm thick,set, jointed and pointed in neat cement slurry as in floors with grey cement and laid over screed bedding 15mm thick in CM(1:6) over sub base complete all as specified and as directed |
| 121 | Material and labour for PCC type D-2, 1:4:8 ( using 40 mm garded stone aggregate), as in sub base (75mm thick) to paving complete all as specified and as directed. |
| 122 | Material and labour for cement concreteType B-1, 1:2:4 ( using 20 mm graded stone aggregate) as seismic, plinth and similar bands, coping, kerbs, cills, steps, parapets, apex stones, bed plates, kerbs, railings up to 60 cm in height, water troughs and the like rounded or chamfered on edges including necessary form work complete all as specifed and as directed. |
| 123 | Sewage Disposal: Excavating in trenches not exc 1.5 metre wide and not exc 1.5 metre depth for foundation etc or for shafts, wells, cesspit manholes. Pier holes not exc 10Sqm on plan and not exc 1.5 mtr in depth and getting out in soft/loose soil complete all as specified and as directed |
| 124 | Material and labour Reinforced concrete pipes 150mm dia class NP-2 laid and jointed in cement mortar (1:1) with collars complete all as specifed and directed. |
| 125 | Material and labour PCC type D-2, 1:4:8, (using 40mm graded stone aggregate) in concrete bed to drain pipes 150mm dia including packing under and haunching against the sides of pipes after they are laid and tested complete all as specifed and as directed. |
| 126 | Material and labour for PCC type D-2, 1:4:8 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specifed and as directed. |
| 127 | Material and Labour for Brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in CM(1:3) of any description complete all as specified and directed. |
| 128 | Material and labour for Cement concrete Type B-0, 1:2:4 (using 12.5mm graded stone agg) as in coping, bed plates, kerbs and like including formwork, weathering, slightly rounded or chamfered angles and throating complete all as specifed and as directed. |
| 129 | Material and labour for Cement concrete type B-2, 1:2:4 (using 40mm graded stone aggregate) in surface channels of drains and benching including finishing the top of benching even and smooth using extra cement (forming fair finished channel shall be measured & paid for separately) complete all as specifed and as directed. |
| 130 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitred/stopped ends etc. |
| 131 | Material and labour rendering 15 mm thick on stone masonary surfaces or surfaces other than fair faces of brick masonry surfaces in cement mortar (1:3) mixed with water proofing compound 3% by weight of cement finished even and smooth without using extra cement complete all as specifed and as directed.Note:- Water proofing compound shall be measured and paid separately under relevant item as (supply only) |
| 132 | Material and labour Precast reinforced cement concrete Type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in manhole cover slab, set in cement mortar 1:4, including forms, moulds required etc all as specified and as directed |
| 133 | Returning filing in including spreading levelling watering and well ramming in layers not exceeding 25 cm in soil. complete all as specifed and as directed. |
| 134 | Removing excavated material (soil) to a distance exceeding 250m but not exceeding 500m and depositing where directed at a level not exceeding 1.5 m above the starting point.. complete all as specifed and as directed. |
| 135 | Cutting into existing manholes for connecting new drains 150mm dia, making good to pipe & rendering, cutting out existing benching for & forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished & reforming benching as required complete all as specifed and as directed. |
| 136 | Building Works (E&M):Taking down sub main wiring any description along with PVC conduit/Casing capping/wooden batten/metal conduit and made good the disturbed surface complete all as specifed and as directed. |
| 137 | Taking down Unserviceable DB/.metal clad boxes any description or size/way including MCCB/MCBs complete all as specifed and as directed. |
| 138 | Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store for Servicable one for reuse & Un serviceable.one for BER process. complete all as specifed and as directed. |
| 139 | Taking down Exhaust fan, ceiling rose, dismantling blades and removing fan and blades to store.for Servicable one for reuse & Un serviceable.one for BER process. complete all as specifed and as directed. |
| 140 | Taking down old aluminium point wiring (light, fan, socket or power) complete fittings such as switches,sockets,ceiling rose, pendents, regulators etc complete as ordered and removing retrived materials and making good the disturbed surface of wall, floors, ceiling etc. complete all as specifed and as directed. |
| 141 | Material and labour for point wiring concealed type with 1.5 sqmm PVC FRLS insulated,un-sheathed 1100 volts grade copper conductor single core multi stranded drawn through with and including non metallic rigid PVC rigid conduit not less than 20 mm dia with its accessories concealed on walls, suface on ceiling etc., with suitable clamps/ shaddles, including provision of suitable 1.6 mm thick MS pressed steel terminal boxs concealed suitable to modular sockets/switches including modular cover frame and plate in wall for housing of modular switiches, sockets, fan regulators etc., including one run of 1.50 sqmm PVC insulated copper conductor for continious earth wire and connected to common earth dolly for following :-(a) One light point controlled by one switch. |
| 142 | (b) All as per item NO 141 (a) herein about but for One light point controlled by Two switch. |
| 143 | (c) All as per item NO 141 (a) herein about but for One fan point controlled by one switch |
| 144 | (d) All as per item NO 141 (a) herein about but for One socket point on Independent board |
| 145 | (e) All as per item NO 141 (a) herein about but for One socket point on same board with other switches |
| 146 | (f) All as per item NO 141 (a) herein about but for One call bell point controlled by one bell push |
| 147 | All as per item No 141 herein above but with 2.5 sqmm for power point 15 amps.including Inverter point complete all as specified and as directed |
| 148 | All as per item No 141 herein above but with 4.0 sqmm for AC point socket outlet 15 amps complete all as specified and as directed |
| 149 | Supply and fix Modular Switch flush type, 6 amps 240 volts single pole one way complete all as specifed and as directed. |
| 150 | Supply and fix Modular switch flush type 6 Amps, Single Pole Two way. complete all as specifed and as directed. |
| 151 | Supply and fix Modular Switch flush type, 16 amps 240 volts single pole one way including Inverter point complete all as specifed and as directed. |
| 152 | Supply and fix Modular Bell push 6 Amps 230 Volts complete all as specifed and as directed. |
| 153 | Supply and fix Ceiling rose surface PVC insulated three plates \\"JUMBO' type 240 volts complete all as specifed and as directed. |
| 154 | Supply and fix Modular socket outlet 2/3 pin 6 amps 240 volts flush type. Two module complete all as specifed and as directed. |
| 155 | Supply and fix Modular socket out let 6/16 Amp 6pin flush type Two module complete all as specifed and as directed. |
| 156 | Supply and fix Modular Switch socket combination 2 in 1 multipurpose 5/15 amps 240 volts universal type (for geyser). complete all as specifed and as directed. |
| 157 | Supply and fix Modular Fan regulator electronic type with 5 step control suitable for 1200/1400 mm ceiling fan. complete all as specifed and as directed. |
| 158 | Supply and fix Call bell 230 volts single pole A/C fancy type multi music type bell and including taking out unserviceable old bell complete all as specifed and as directed. |
| 159 | Material and labour for Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specifed and as directed. |
| 160 | Supply and fix LED Lamp 12W complete all as specifed and as directed. |
| 161 | Supply and fix in replacement of Wall mounted light fitting LED batten, extruded aluminium heat shink provided for effcient heat dissipation & integrated electronic driver with 22 W LED (4 ft) lamp including disconecting, removing, and connecting into electric circuit and testing.complete all as specifed and as directed. |
| 162 | Supply and fix Decorative LED wall light fitting including 15W LED lamp complete all as specified and as directed |
| 163 | Supply and fix in replacement of light fitting LED luminares New generation energy saving IP65 light luminaire with opal diffuser with (2Ft) 10W LED including disconecting, removing, and connecting into electric circuit and testing complete all as specifed and as directed. |
| 164 | Supply and fix in replacement of security light fitting LED luminares New generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP65 roadway luminaire with high power LED as light source with 35W LED 5000K lamp including disconecting, removing, and connecting into electric circuit and testing. complete all as specifed and as directed. |
| 165 | Supply and fixing post top lantern LED type 20 watt 230 volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specifed and as directed. |
| 166 | Supply and fix for GI Bracket bend to shape in cold or hot 40mm bore medium grade and 1.50 M long with suitable MS clamps and nuts bolts etc, to fixing security light fittings to Bldgs complete after taking down the unserviceable GI bracket complete all as specifed and as directed. |
| 167 | Cutting chases, pinning in making good to facings where required and pointing in cement motor 1:3 to ends or edges of landings steps, chills, sunshades, shelves, lintels etc and cutting chases for concealed conduit wiring etc. and making good cutting exceeding 10cm but not exceeding 20cm girth complete all as specifed and as directed. |
| 168 | Material and labour sub main wiring two run of 4 sqmm single core PVC insulated unsheathed cable single core multistranded copper conductor 1100 volts grade drawn through suitable size of PVC conduit and conduit accessories concealed on floor/wall/ surface on ceiling with suitable clamps/saddles including one run of 4.0 sqmm PVC insulated copper cable for continuous earth conductor connected to common earth dolly. for Geyser complete all as specifed and as directed. |
| 169 | Material and labour sub main wiring two run of 10 sqmm single core PVC insulated unsheathed cable single core multistranded copper conductor 1100 volts grade drawn through suitable size of PVC conduit and conduit accessories concealed on floor/wall/ surface on ceiling with suitable clamps/saddles including one run of 10 sqmm PVC insulated copper cable for continuous earth conductor connected to common earth dolly. complete all as specifed and as directed. |
| 170 | Supply and fix Single pole and neutral enclosure with a two pin and earth plug and socket complete one single pole MCB 20/30 Amps, 240V complete concealed on wall and connecting with all connections complete all as specifed and as directed. |
| 171 | Supply and fix of Sheet metal enclosure with distribution board Double Door 230 volts SPN 12 way with suitable Bus bar and provision for MCBs/ isolators fixed on wall and connecting with all connections complete all as specifed and as directed. |
| 172 | Supply and fixing of Vertical type sheet metal enclosure MCB DB TPN 6 ways double door type including 63 Amps MCCB 4 Pole 415 V,16 KA incomer with suitable bus bar surface/concealed on wall and connecting with all connections complete all as specifed and as directed. |
| 173 | Supply and fixing of Vertical type sheet metal enclosure MCB DB TPN 4 ways double door type including 100 Amps MCCB 4 Pole 415 V,16 KA incomer with suitable bus bar surface/concealed on wall and connecting with all connections complete all as specifed and as directed. |
| 174 | Supply and fixing MCB's 6-32/40 amps, 10 KA , SP 240V complete all as specifed and as directed. |
| 175 | Supply and fixing MCB's SPN 6-32/40 Amps, 10 KA , 240V complete all as specifed and as directed. |
| 176 | Supply and fix exhaust fan (BLDC) made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250mm and connecting including provision of cable 3 core of 0 .5 sqmm from ceiling rose to fan complete all as specifed and as directed. |
| 177 | Supply and fixing ceiling fan (BLDC) complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Minimum air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor complete all as specifed and as directed |
| 178 | Material and labour for earthing complete with GI plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5m below ground level connected to earth lead of 4.0 mm GI wire by means of bolts, nuts, washers of galvanized all as shown in electrical plate No.3 of SSR Part-I including necessary excavation and earth work. PCC 1:3:6 type C1 chamber, RCC cover in 50mm thick 1:2:4 type B1 with 8mm TMT 140mm centre to centre with suitable handle, watering pipe 20mm dia light grade pipe with funnel, charcoal salt connected to earthing test point all as specified including testing and commissioning on completion complete all as specifed and as directed. |
| 179 | Material and labour Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc. as required GI wire 4.0 mm thick for inter connecting of earth electrodes. complete all as specifed and as directed. |
| 180 | Supply and fix energy saving electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, including grouted with suitable size of nut & bolts,making good the surface, PVC connection piece complete all as specified and as directed |
| 181 | Disconnecting, removing carefully the Electric water heater of capacity 50/25 Ltrs and handing over in AGE E/M store yard all as directed by Engineer-in-Charge for refix as serviceable one and .BER as un serviceable one complete all as specifed and as directed. |
| 182 | Re fixing only electric water heater of capacity 25 Ltrs and rating retrived against Sl No.172 including grouted with suitable size of nut & bolts,making good the surface, PVC connection piece above in the same location or at new location within same Bldg.complete all as specified and as directed |
| 183 | Supply and fixing in repairs of PVC connection pipe 15mm dia 450mm long heavy duty suitable for hot / cold water with two brass union and washer complete all as specifed and as directed. |
| 184 | Disconnecting removing carefully the tamper proof electronic meter and handing over in AGE E/M store yard all as specified and as directed |
| 185 | Fixing only tamper proof electronic meter any type and rating retrived against Sl No.179 above in the same location or at new location within same Bldg. complete all as specifed and as directed. |
| 186 | Supply and fix PVC non metallic rigid conduit not less than 20 mm dia with its conduit accessories concealed on floor/wall/ surface on ceiling with suitable clamps/saddles rigid non-metallic PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specifed and as directed. |
| 187 | Supply and fix modular White cover plate with frame, 1 module complete all as specifed and as directed. |
| 188 | Supply and fix modular Metal flush box 1 module complete all as specifed and as directed. |
| 189 | Supply and fix modular telephone socket 1 module complete all as specifed and as directed. |
| 190 | Supply and fix modular TV socket 1 module complete all as specifed and as directed. |
| 191 | Taking down carefully old serviceable wall mounted LED fittings of any size for reuse at site or carrying to the store complete all as specifed and directed. |
| 192 | Taking down carefully old serviceable DECORATIVE LED fittings of any size for reuse at site or carrying to the store complete all as specifed and directed. |
| 193 | Taking down carefully old serviceable MIRROR LED fittings of any size for reuse at site or carrying to the store complete all as specifed and directed. |
| 194 | Taking down carefully old serviceable SECURITYFITTING LED fittings of any size for reuse at site or carrying to the store complete all as specifed as and directed. |
| 195 | Taking down carefully old serviceable MCB's SP of any size for reuse at site or carrying to the store complete all as specifed and as directed. |
| 196 | Taking down carefully old serviceable MCB's SPN of any size for reuse at site or carrying to the store complete all as specifed and as directed. |
| 197 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sq mm 2 core complete all as specifed and as directed. |
| 198 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of but size 35 sq mm 3½ core as specifed and as directed. |
| 199 | Material and labour for painting of ceiling fans/exhaust fan any sweep, complete in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. Refixing /hanging only ceiling fan (M.D. supply) and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and as directed |
| 200 | Excavation in trenches not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide and getting out in hard/dense soil for complete all as specifed and as directed. |
| 201 | Removal of surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point. complete all as specifed and as directed. |
| 202 | Material and labour for DWC HDPE pipe of size 90/76 mm bore (OD X ID) for LT UG cable protection . complete all as specifed and as directed. |
| 203 | Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure. complete all as specifed and as directed. |
| 204 | Material and labour for cutting Bitumen macadam / concret foot path to a depth 0.75 mm with suitable mechanical cutter making good with cement concrete 1 : 2: 4 type B1 ( 20mm graded aggregate ) complete all as specifed and as directed. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
