Defence Statutory Bodies & Commissions/Committees Closing in 0 days TDR #55910384

Tender For special Repair To Bldg No P-9 At Hq K&K Sub Area Offrs Mess And Provn Of Two Wheeler Parking Shed For Coy/Wg Office Complex At Cmp Centre And School Under Ge(South) Bangalore

Issued by Statutory Bodies & Commissions/Committees · GE(South) Bangalore, Karnataka
Tender Value
23.89 Lakhs
Estimated cost
Bid Submission
04 Jul 2026
0 days left
EMD
47780
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
GE(South) Bangalore → Karnataka
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for special Repair To Bldg No P-9 At Hq K&K Sub Area Offrs Mess And Provn Of Two Wheeler Parking Shed For Coy/Wg Office Complex At Cmp Centre And School Under Ge(South) Bangalore

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 22-Jun-2026 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 29-Jun-2026
2 29-Jun-2026 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 04-Jul-2026

BOQ

Name of Work:- SPL REPAIR TO BLDG NO P-9 AT HQ K&K SUB AREA OFFRS MESS AND PROVN OF TWO WHEELER PARKING SHED FOR COY/WG OFFICE COMPLEX AT CMP CENTRE AND SCHOOL UNDER GE(SOUTH) BANGALORE
Sl. No. Item Description
1Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
2M&L Reinforced cement concrete Nominal mix type B1 (using 20 mm graded crushed stone aggregate) as in slabs supported on walls , beams and columns in floors, roofs landings balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
3M& L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc., flat rough finished surfaces of concrete complete all as specified and directed.
4M&L Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
5M&L 75 mm thick cement concrete type D2 1:4:8 (using 40 mm graded crushed stone aggregate) as in pavings as specified and directed.
6M&L Sand filling under floors or in foundations including watering and consolidation as sand cusioning complete all as specified and directed
7M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment in hardstanding complete all as specified and directed
8M&L preparation of new or previously untreated steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enemel paint over a coat of red oxide as specified and directed..
9Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing servicieable tiles to store and rubbish off the premises.
10Demolition of Concrete of any description and in any position not otherwise specifically provided for as specified and directed.
11Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground floor) as specified and directed.
12S&F light coloured non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed in cement mortar 1:6 all as specified and as directed
13S&F coloured Glazed ceramic tiles in vertical surface 300x450x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering in CP 1:4 as specified and directed.
14M&L for 75 mm thick, PCC 1:3:6 type C1 (using 20mm graded stone aggregate), finished even and and fair as in plinth protection incl joints filling complete all as specified.
15M&L 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs,pillars, window cills, cooking platforms and like in cement mortar (1:4), 15mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with the granite complete all as specified and directed
16Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar incl removal of debries out side MD land.
17M&L for complete removal of existing treatment of old treated surfaces of walls including washing, rubbing etc. and aapplying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.
18Taking down shutter and refixing in the same opening, shutter. exc 1.sqm and n. exc. 2 sq. m each complete all as specified and directed.
19Taking down chowkat or frames with shutter (without taking off shutters from the frame) not exc 1.5 sqm and removing from store complete all as specified and directed.
20S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fixing in position with hold fast, complete all as specified and directed. (Cost of hold fast included in the unit rate of this item.)
21M &L factory made solid pannel PVC door shutter 30mm thick (style) consisting of frame made out of MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame wedded /sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at side,including two Nos tower bolts/ Handles for each shutter as per specification and drawing upto complete all as specified and as directed.
22S&F light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed in cement mortar 1:6 all as specified and as directed
23S&F light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in wall skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10 mm thick plaster in cement mortar 1:4 all as specified and as directed
24S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hold fasts; wall ties; and similar small articles conforming to Fe-290 Gde-E-165 as specified and directed.
25S&F 150 mm size extruded aluminium alloy handles fabricated type with plate anodized complete all as specified.
26S&F 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified.
27S&F 150 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheets cast or extruded sections or cast aluminium alloy complete all as specified.
28M&L Machine cut polished sadarahalli stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete
29M& L for machine cut polished sadarahalli stone , uniform texture, in one p[iece in trade and risers, skirting of staircase incuding rounding the edge , cutting anti skid grooves 3 nos in each trade , plastering / screed 15 mm thick in CM 1:4 complete as specified and as directed. Please Enable Macros to View BoQ information
30M& L for machine cut polished sadarahalli stone , uniform texture, in one p[iece in trade and risers, skirting of staircase incuding rounding the edge , cutting anti skid grooves 3 nos in each trade , plastering / screed 15 mm thick in CM 1:4 complete as specified and as directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 55910384
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 23.89 Lakhs
LAST DATE 04-07-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for special Repair To Bldg No P-9 At Hq K&K Sub Area Offrs Mess And Provn Of Two Wheeler Parking Shed For Coy/Wg Office Complex At Cmp Centre And School Under Ge(South) Bangalore
Basic Detail
Tender No 8997/E8
Bidding Type Tender
Location
City GE(South) Bangalore
State Karnataka
Key Dates
Publish Date 29 Jun 2026
Submission Date 04 Jul 2026
Open Date 06 Jul 2026
Finance
Tender Value 23.89 Lakhs
Tender Fee 500
EMD 47780
Exemption Available
Document List
BOQ_863552.xls
e3c9583a-99a6-4e16-a789-9b6d31cf6893.html
Tenderdocument8997.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jun 29, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jun 29, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Completed
Jul 04, 2026
18:00 IST

Corrigendum-2 Issued

Clarifications on tender conditions and amendments issued.

Completed
Jul 04, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jul 06, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 1 day

Tender Documents

Download All (ZIP) ↓
xls

BOQ_863552.xls

html

e3c9583a-99a6-4e16-a789-9b6d31cf6893.html

pdf

Tenderdocument8997.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders