|
| 1 | Comprehensive day to day maint of the defects pertaining to internal electrification of any type and nature such as taking down defective switch/ socket/ ceiling rose/ holders/ fittings/ fixtures/ building security lights/ Gate light/ Garden light etc. any type, rectification of faulty electric circuits, tightening of loose connections, replacement of old u/s wiring/ conduits/ casing caping & connections etc. complete all as specified and directed. |
| 2 | NOTE FOR ITEM NO 1 & 2:-(a) All T & P and labour team required comprising the Nos of trained electricians & helpers will be provided by the contractor daily as directed.(b) Rep of the contractor will present in complaint cell & responsible for receiving & attending the complaints from 08.30 Hrs to 04.30 Hrs the time of lodging the complaint. In absence of rep of Contractor penel recovery @ 100 Repees to be deducted per complaint not attended in the stipulated time frame.(c) Cost of minor stores such as screws, clamps, insulation tapes, nuts/ bolts, nail etc. of required size shall be deemed included in the above quoted item.d) Complaints where complete replacement of faulty circuit/ point wiring required, shall be measured under relevent item.(e) The contractor will be responsible for providing Job card clearly mentioned CA No and electrician No and after obtaining sign from concerned JE, he will address the compliant and deposit the same day complaint slip in complaint cell. |
| 3 | S&F in repair TPN DB with provision for MCB TPN as incomer and SP MCBs as outgoing made of steel sheet phosphatised powder coated with bus bar, neutral link earth bar and DIN Rail having IP 42-IK 09 with metal door capacity 4-ways 415 V, connection with aluminium/ copper lugs including civil/ plastering work for make up good the disturbed surface matching with existing surface complete all as specified and directed. |
| 4 | S&F MCCB 4 pole, 415 volts, in the existing panel/ location and connection with using aluminum lugs complete all as specified and directed for 100 to 125 Amps rating, 16 KA breaking capacity including taking down old unsv complete all as specified and directed. |
| 5 | Supply and fixing in repairs double door SPN DBs 8 ways of powder coated DB's suitable for MCB's fitted with bus bar, Neutral link, Earth bar and Din ral complete all as specified and directed. |
| 6 | S&F in repairs double door SPN DBs 4 ways of powder coated DB's suitable for MCB's fitted with bus bar, Neutral link, Earth bar and Din ral complete all as specified and directed. |
| 7 | Supply and fixing in repairs double door SPN DBs 12 ways of powder coated DB's suitable for MCB's fitted with bus bar, Neutral link, Earth bar and Din ral complete all as specified and directed. |
| 8 | S&F in repairs MCB SPN 32 Amps 10 KA, 'C' series including connection with suitable size aluminium/ copper lugs complete all as specified and directed. |
| 9 | S&F in repairs MCB SPN 40 to 63 Amps 10 KA, 'C' series including connection with suitable size aluminium/ copper lugs complete all as specified and directed. |
| 10 | S&F in repairs MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'C' series including connection with suitable size aluminium/ copper lugs complete all as specified and directed. |
| 11 | S&F in repair MCB triple pole & neutral 63 Amp, 415 volts, 'B' series' 10 KA breaking capacity & connection complete all as specified and directed. |
| 12 | M&L for Sub main wiring in repairs with two runs of single core FRLSH PVC insulated unsheathed cable 1100 volts grade, 10.0 Sqmm size with multistranded copper conductor, drawn in and including concealed non metallic rigid PVC conduit of not less than 25mm dia including one run of PVC insulated unsheathed 10.0 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surface of wall including taking down and old unsv complete all as specified and directed. |
| 13 | M&L for Sub main wiring in repairs with two runs of single core FRLSH PVC insulated unsheathed cable 1100 volts grade, 6.0 Sqmm size with multistranded copper conductor, drawn in and including concealed non metallic rigid PVC conduit of not less than 25mm dia including one run of PVC insulated unsheathed 4.0 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surface of wall including taking down and old unsv complete all as specified and directed. |
| 14 | M&L for Sub main wiring in repairs with two runs of single core FRLSH PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in and including concealed non metallic rigid PVC conduit of not less than 25mm dia including one run of PVC insulated unsheathed 2.5 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surface of wall including taking down and old unsv complete all as specified and directed. |
| 15 | Supply, installation, testing and commissioning of hybrid smart energy meter single phase temper proof LCD display, 10-60Amp, accuracy class-I 50Hz, better capable of measuring KWH, KVAh, with hybrid communication (RF/ GPRS/ 4G with RS 485 optical backup), tamper detection, load profling, net metering capability, multiple communicatio techmology suitable for integration with smart metering infrastructure, BMS, or utility AMI sytem incl taking down old unsv and deposit to MES store yard complete all as specified and directed. |
| 16 | Supply, installation, testing and commissioning of hybrid smart energy meter Three phase temper proof LCD display, 10-60Amp, accuracy class-I 50Hz, better capable of measuring KWH, KVAh, with hybrid communication (RF/ GPRS/ 4G with RS 485 optical backup), tamper detection, load profling, net metering capability, multiple communicatio techmology suitable for integration with smart metering infrastructure, BMS, or utility AMI sytem incl taking down old unsv and deposit to MES store yard complete all as specified and directed. |
| 17 | Supply & fixing plastic body exhaust fan AC single phase 230/ 240 V of size 200mm sweep with louver, white in colour including duly connection with copper wire etc, including taking down and old unsv exaust fan deposit to E/M Store complete all as specified and directed. |
| 18 | Supply & fixing plastic body exhaust fan AC single phase 230/ 240 V of size 250mm sweep with louver, white in colour including duly connection with copper wire etc, including taking down and old unsv exaust fan deposit to E/M Store complete all as specified and directed. |
| 19 | S&F in repairs/ replacement plastic body exhaust fan AC single phase 230/ 240 V of size 300mm sweep with louver, white in colour including duly connection with copper wire etc, including taking down and old unserviceable exaust fan deposit to E/M Store complete all as specified and directed. |
| 20 | S&F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts and taking down old unsv light complete all as specified and directed. |
| 21 | S&F for energy efficient exhaust fan havey duty of 300mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base including writting the MES Number with synthetic enamel paint including taking down old unsv exhaust fan and deposit the same in the AGE E/M-III store complete all as specified and directed. |
| 22 | S&F replacement of ceiling fans complete with blades, down rods 15mm/ 12mm upto two mtr, run with electronic regulator or remote with battery and complete accessories, 230 V, 50Hz, 1200mm sweep and rated power 26W (+10%) and rate speed 350 RPM (+10%) Min air delivery 210 CFM with service value shall not be less than 8.00 BEE as per BIS. Five star rated with brushless direct current motor (BLDC), painting to match with existing surfaces including taking down old unsv fans and deposit the same in the MES store complete all as specified and directed. |
| 23 | S&F in repair LED inverter type bulb of 9 watt, Of base B-22 CDL, suitable for fixing in lamp holder including taking down old unsv complete all as specified and directed. |
| 24 | Supply & fix in repair sheet metal enclousure with a 3 pin (2 pin and earth) plug & socket complete with one MCB SP 20 Amps of breaking capacity 10KA, 'C' series, 240 volts including taking down old unsv complete all as specified and directed. |
| 25 | Supply & fixing repairs and testing of Energy efficient 5 Star BEE rating, electric geyser of 25 liters capacity with Fiber/ ceramic body with puff insulation inner tank ceramic with all in built safety accessories like thermo start/ automatic thermal cut out with ON/OFF/Cut out indications all pre wired and additional safety accessories like pressure release valve, non return valve in same or other position as ordered with the help of suitable suitable size of nuts & bolts making necessary electrical connection incl taking down and safe deposit of old unserviceable Geyser to E/M Store complete all as specified and directed. |
| 26 | S&F in repairs LED tube rod 20 watts, complete with all accessories duly connection with three core flexible copper cable and duly fixed on two Nos PVC square boxes complete all as specified and directed. |
| 27 | S&F in repairs LED tube light fittings 1 x 9/ 10 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of pvc square boxes complete all as specified and directed. |
| 28 | S&F for energy saving recess/ surface mounted luminaire 36/ 40/ 42W, high efficiency PMMA diffuser gives soft glare free light, suitable for 600 x 600 ceiling cut out, recess mounted 36W LED luminaire in MS housing (2' x 2') incl Provn of three core cable of copper conductor of size 1.5 sqmm, making necessary electric connetion from ceiling rose to fitting terminal, fixing the fitting on ceiling including cutting, grooving with proper finish and making good, disturbed surface with all fixing arrangement including taking down old unsv light fitting complete all as specified and directed. |
| 29 | S&F for energy efficient, Ultra Modern design LED luminiaire 36/ 40/ 42 W (1 x 4) with CRCA housing white power finish, which provides soft-light glare free symmetrical illumination suitable for Armstrong/ Grid ceiling/ surface application, incl provn of three core cable of copper conductor of size 1.0 sqmm, making necessary electric connection from celing rose to fitting terminal, fixing the fitting on ceiling including cutting, grooving with proper finish and making good, disturbed surface with all necessary fixing arrangment including taking down old unsv light complete all as specified and directed. |
| 30 | Supply & fix LED Bulk Head luminaire 10W, 6000K pressure die cast housing with IP65 protection complete with electric connection & all necessary fixing arrangement including taking down old unsv bulk head fitting complete all as specified and directed. |
| 31 | Supply & fix surface mounted round LED panel of 12 W to 16 W Al die cast body with premium diffuser to ensure glare free & even distribution of light complete with electric connection including taking down old unsv complete all as specified and directed. |
| 32 | Supply & fix surface mounted round/ Square LED panel of 24 W Al die cast body with premium diffuser to ensure glare free & even distribution of light complete with electric connection including taking down old unsv complete all as specified and directed. |
| 33 | Supply and fix in repairs Wall light fittings suitable for & including LED bulb of 7 watt (B-22), including connection with all necessary fixing accessories complete all as specified and directed. |
| 34 | S&F in repairs for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium/ polycarbonate housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and directed. |
| 35 | Supply and fix in replacement LED bulb of 9/12 watt, Of base B-22, suitable for fixing in lamp holder complete all as specified and directed. |
| 36 | S&F for energy efficient exhaust fan havey duty of 380/ 450mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base including writting the MES Number with synthetic enamel paint including taking down old unsv exhaust fan and deposit the same in the AGE E/M-III store complete all as specified and directed. |
| 37 | Supply & fix electric wall fan of 400mm sweep, 230 Volts single phase, white in colour, complete with all accessories like nuts, bolts, clamps etc and connection from ceiling rose including taking down old unsv wall fan and deposit the same in the AGE E/M-III store complete all as specified and directed. |
| 38 | (a) Condenser of capacity 2.5 to 3.15 Microfarad, 440 Volts, AC 50 Hz, plastic-casing, two terminal-copper wire, confirming to IS 1709 complete all as specified and directed. |
| 39 | (b) Rubber bush for shackle with bolt, nut and lock pin suitable for Ceiling fan 1200mm/ 1400mm sweep. |
| 40 | (c) Split Pin |
| 41 | (d) Ball bearing of size 6201/6202 or as per sample. |
| 42 | (e) Gun metal bush as per sample. |
| 43 | (f) Condenser housing, suitable for placing condensor at ceiling fan/ Exaust fan as per sample |
| 44 | (g) Fan canopy pvc body, white in colour, suitable for existing fan as per sample and directed. |
| 45 | S&F in repair 'U' shape shackle clamp assembly incl checknut, bolts, screws, washer, lock nut, rubber reel etc and connecting, complete all as specified and directed. |
| 46 | Supply and fix in replacement of PCB, sensor for BLDC fan suitable for exisiting BLDC fan as per sample including taking down old unsv complete all as specified and directed. |
| 47 | Supply and Fix stepped type Electronic fan regulator, flush type, 230 V, AC, single phase connection complete all as specified and directed. |
| 48 | S&F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and directed. |
| 49 | Supply & Fix in replacement, of remote for BLDC fan suitable for exsiting BLDC fan as per sample and site requirement complete all as specified and directed. |
| 50 | Supply and fix in repair MS down rod 'medium grade' 15mm dia, in appropriate length of segments of required size of each down rod as per site requirement, including all fixing arrangments like hooks, clamps, nuts, bolts etc for hanging the ceiling fan at site, complete with making split holes, cut or threads at both end of pipe as required for hanging of Ceiling fan incl. painting of down rod with two coats of synthetic enamel white colour paint over one coat of primer complete all as specified and directed. Please Enable Macros to View BoQ information |
| 51 | Supply and fix in repair MS down rod 'medium grade' 15mm dia, in appropriate length of segments of required size of each down rod as per site requirement, including all fixing arrangments like hooks, clamps, nuts, bolts etc for hanging the ceiling fan at site, complete with making split holes, cut or threads at both end of pipe as required for hanging of Ceiling fan incl. painting of down rod with two coats of synthetic enamel white colour paint over one coat of primer complete all as specified and directed. Please Enable Macros to View BoQ information |
