Tender For Repair To Concertina Coil Above Perimeter Wall,Chainlink Fencing Barbed Wire And Painting Of Steel Surface In Domestic Area At Af Stn Singarsi Under Age (I) Af Stn Singarsi.
Tender Value
9 Lakhs
Estimated cost
Bid Submission
08 Jul 2026
0 days left
EMD
18000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
AGE I AF SINGARSI → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Concertina Coil Above Perimeter Wall,Chainlink Fencing Barbed Wire And Painting Of Steel Surface In Domestic Area At Af Stn Singarsi Under Age (I) Af Stn Singarsi.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 01-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 08-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing rubbish to a distance n.exc 50m at low lying area complete all as specified and directed. |
| 2 | M&L for 40mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in flooring finished even and smooth without using extra cement complete all as specified and directed. |
| 3 | M & L PCC 1:4:8 Type D-2 ( using 40mm graded stone agg.) as in foundation , filling and mass concrete complete all as specified and directed. |
| 4 | M&L for PCC 1:2:4(Nominal mix)(using 20mm gradded stone aggregate) type B1 using stone aggregate as in coping benching complete all as specified and directed. |
| 5 | M&L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed. |
| 6 | M&L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and directed. |
| 7 | Demolition of Brickwork of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 8 | M & L for brick work with sub class 'B' old size brick straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 9 | Taking down cement plaster of any description on brick or stone walls, Chajjas etc., including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 10 | Material & Labour for 15mm thick rendering in Cement Mortar 1:4 on brick work or concrete surfaces, finished even and smooth without using any extra cement complete all as specified and as directed. |
| 11 | M&L for preparation of new surface and and applying two coats of cement base paint over a coat of white cement primer on walls complete all as specified and directed. |
| 12 | Demolition of Stone slabs and tiles laid, bedded and pointed in any mortar any description or thickness in floors, aprons etc. complete all as specified and directed. |
| 13 | M&L liquior finish/glossy finish chequered cement concrete tiles 30cm x 30cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors using white cement and pigments including 15mm thick screed bed in CM 1:6etc (as in patches and as per site condition) as per design/pattern approved by AGE(I) etc complete all as specified and directed. |
| 14 | M&L liquior finish/glossy finish Machine pressed precast concrete interlocking paver block rubber moulded laid with Grey cement and pigment any size and shape conforming to IS 15658-2006 of 60mm thick M-35grade over and including 50 thick sand cushion etc complete all as specified and directed. |
| 15 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 16 | S&F Mild steel framed work as in grills, with ends of bars shouldered work conforming to Fe-410-0 as per existing grills at site complete all as specified and directed. |
| 17 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to beprepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete. Conforming to ( Fe-290 (Gde E-165) complete all as specified and directed. |
| 18 | S&F Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and directed. |
| 19 | M&L preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described and apply two coats of synthetic enamel paints over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 20 | M & L Preparation of old steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed. |
| 21 | Dismantling ,posts or struts (wood, steel or RCC) any section , including taking out embedded portion in natural ground and making good disturbed ground complete all as specified and directed. |
| 22 | S&F MS angle iron post & strut etc. in fencing including embedding in concrete and screwing etc. including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 GdeE-165 complete all as specified and directed. |
| 23 | Excavation of soft/loose soil in post holes (or similar holes) each n exc 0.5 Cum getting out returning ,filling in and ramming earth or broken rubble mixed with earth around ,in layers not exceeding 25cm ,watering complete all as specified and directed. |
| 24 | M&L for cement concrete type C2 1:3:6 (40 mm graded stone aggregate) in foundations, filling and mass concrete or for fixing of RCC/ angle post complete all as specified and directed. |
| 25 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long and diameter of neck 5 to 10mm complete all as specified and directed. |
| 26 | Supply and fixing 10mm dia mild steel round bars dia cut to length , bent to hook at ends for fixing as line wires to chain link fencing all as directed at site complete all as specified and directed.(Fe-290(GdeE-165) |
| 27 | Dismantling fencing wire mesh, any type complete all as specified and directed. |
| 28 | Supply only chain link MS galvanised fencing wire mesh of 100 mm x 100mm size made with 3.40mm dia GI wire complete all as specified and directed. |
| 29 | Fixing only chain link MS galvanised fencing of size 100 x100 mm mesh and 3.4 mm dia wire including line wires, to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. |
| 30 | S&F in repair for galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. (each line to be wire measured) |
| 31 | Supply and fix galvenised Concertina coil (reinforced punch barbed tape single layer of 600mm dia and 75mm aperture straining (weight n. less than 1.40 kg /Rm) and fixed on Y shaped angle iron over security wall with and including necessary clip (not less than125 clip for each burndel of coil) for securing complete all as specified and directed. (Note: Unit weight shall be ascertained through BOO convened by AGE(I) Singarsi. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 08, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayJul 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender