|
| 1 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing rubbish to a distance n.exc 100m at low lying area complete all as specified and directed. |
| 2 | Material and labor for P.C.C type C-2, 1:3:6 (40 mm graded stone aggregate) 75 mm thick in sub base floor and plinth protection etc complete all as specified and directed. |
| 3 | Material and labor for P.C.C type B-2, 1:2:4 (40mm graded stone aggregate) 75 mm thick as in base floor and top layer including smooth finish without extra cement complete all as specified and directed.. |
| 4 | Material and labor for P.C.C type B-2, 1:2:4 (40mm graded stone aggregate) 50 mm thick as in patch repair for base floor and top layer including smooth finish without extra cement complete all as specified and directed. |
| 5 | M&L for Formwork in rough finish surface to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide in rough finished flat concrete surface complete all as specified and directed.. |
| 6 | Demolition of reinforced cement concrete in any position (reinforcement cut as required to facilitate demolition) and removing rubbish to a distance 50m at low lying area complete all as specified and directed |
| 7 | M & L pre-cast RCC 1:2:4 Type B1 using 20mm gradded stone aggregate as in manhole cover/Drain cover slab and setting in CM (1:6) complete all as specified and directed. |
| 8 | M&L for RCC (nominal mix) Type B1(1:2:4) (using 20mm gradded stone aggregate) as in beams and lintels above1.50m clear span etc complete all as specified and directed. |
| 9 | M&L reinforced cement concrete nominal mix type B1 (1:2:4) using 20 mm graded stone aggregate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 10 | Use and waste for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 11 | Formwork to side and soffits of floor or roof beams,lintels etc flat for fair finished surfaces complete all as specified and directed. |
| 12 | S&F mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9mm dia or securing with clip and confirming to grade Fe-410-W(Gde-250) complete all as specified and directed. |
| 13 | All as per item no. 12 above here in before but 5mm dia and over upto and incl. 10mm dia in stirrups spacers and binders complete all as specified and directed. |
| 14 | M&L for Cutting out cracks to V-section in existing terracing and runways, cleaning out and filling solidly with Joint Sealing Compound Grade “A” (Normal) in 25/30 Kg, Type: Bag, Grade Standard: A etc complete all as specified and directed . |
| 15 | M&L for one coat of synthetic enamel paint on Concrete Surfaces of any description over 10cm girth or width, not otherwise described including preparation of old painted surface etc complete on as specified and directed. |
| 16 | M&Lfor preparation and cleaning of new/existing PCC runway/ black bituminous surface by removing all loose dirt, seals, oil, grease and foreign materials etc with coir brushes or other means as required/directed and hot applying thermoplastic road marking paint by screening or extrusion process in thickness not less than 2.5 mm using an applicator machine to form traffic stripes such as lines, dashes, arrows, letters, etc. with surface application of reflectorising glass beads as per manufacturer instructions ; complete all as specified and as directed. (Note: The paint shall confirm to BS 3262 Part I & II of 1989.) Please Enable Macros to View BoQ information |