Tender for Repairs to Walls, Tiles, Sunken Floor, Roof Sheet, Leakage, Seepage, Plinth Protection, Plastering Works Incl Roof Treatment, Roof Sheet and Petty Repairs at Zone i Zone ii Under age br i at Nagrota
Tender Value
35 Lakhs
Estimated cost
Bid Submission
07 Jul 2026
2 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagrota → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs to Walls, Tiles, Sunken Floor, Roof Sheet, Leakage, Seepage, Plinth Protection, Plastering Works Incl Roof Treatment, Roof Sheet and Petty Repairs at Zone i Zone ii Under age br i at Nagrota
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 10-Jun-2026 | AMENDMENT TOTENDER | Other | 30-Jun-2026 |
| 2 | 30-Jun-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 07-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Asbestos cement / GI (Corrugated, semi corrugated, etc) sheets including ridges in roof covering complete all as specified and directed. |
| 2 | Dismantling wrought iron or mild steel work of any description complete all as specified and as directed. |
| 3 | Dismantling timber scantlings 40 sqcm and over in section in any position etc complete all as specified and directed. |
| 4 | Demolition of brick work built in cement mortar including all quions ,arcches , pillars etc complete all as specified and directed. |
| 5 | Taking down cement plaster on brick or concrete surfaces, parapets including raking out joint, hacking for key, scrubbing down with water, at any description with necessary scaffolding of max height for G+2 Bldgs etc complete all as specified and directed. |
| 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), and rubbish off the premises complete all as specified and directed. |
| 7 | S&F in repair 10mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes, SS handles for doors of required size complete all as specified and directed. |
| 8 | Demolition of cement or lime concret in any despription and any position along with tarfelt treatment and cement mortar bedding from roof removal rubbish out side MOD land complete all as specified and directed. |
| 9 | M&L Plain cement concrete type B1 (1:2:4) using 20mm graded crushed stone aggregate as in levelling course and other works as in roof, kerb, coping, padding etc complete all as specified and as directed. |
| 10 | M&L for rendering 10mm thick in CM 1:4 on roof suraces with liquid water proofing compound @ 200 ml per bag finished even and smooth without using extra cement complete all as specified and directed. |
| 11 | M & L for Providing and laying of water proofing treatment to sunken portion including vertical portion by applying cement slurry make with acrylic based polymer modify cementeneuous composite compound and including demolition and filling of sunken floor with and including PCC 1:5:10 type E2 (Using 40mm brick aggregate) (a) First layer of slurry of cement @ 0.488 Kg/sqm with acrylic based polymer modify cementeneuous composite compound @ 0.28Kg/sqm. This layer allowed to air cure for 4 hours(b) Second layer of cement slurry @ 0.242kg/sqm mixed with acrylic based polymer modify cementeneuous composite compound @ 0.125kg/sqm. This layer allowed to air cure for 4 hours(c) The slope shall be 1:20 towards the corner of outer wall and GI pipe of 50mm dia (medium grade) be inserted at corner projecting out side 20cm(d) 15mm thick plaster in CM 1:3 mixed with WPC to be provided while concrete on green(e) Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including bitumen primer @ 0.4Kg/Sqm, complete all as specified and directed. |
| 12 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and directed. |
| 13 | S & F in repairs MS framed work as in doors or gates of angle iron, door frame or other section with gusset plate, rails, braces and stair case etc complete, drilled for fixing of steel sheeting or other covering etc, to prepared for hanging or sliding with including either hooks and hinges also fastening grills, grating, hold fast of doors and windows chowkat etc, with ends of bars shouldered and or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanksand fixing and similar work confiRMing to fe 290 Gde E-165 complete all as specified and directed. |
| 14 | Preparation of newly steel surfaces, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 15 | Excavating in post holes (or similar holes) in soft/loose soil each not exceeding 0.5 Cum, getting out, returning filling and ramming earth or broken rubber mixed with earth around in layers not exceeing 25 cm, watering and removing surplus soil to a distance not exc. 50m and making good surface complete all as specified and directed. |
| 16 | S & F in repair steel work in tubular trussles,purlins, rafters, tubler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washers etc. complete using ERW or induction butt welded tubes confiRMing to Fe 410W grade E 250 quality B, etc complete all as specified and directed. |
| 17 | S&F in repair of 0.50mm thick (including coated thickness) pre-colour pre- profiled (Galvalume/zinkalume) curvagated/plain sheets of required colour and design having tensile strength of 550 Mpa as in roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and directed. |
| 18 | S & F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading if required complete all as specified and directed. |
| 19 | S& F in repair Rotational moulded Polyethylene water storage tank tripled layered 500 liters capacity (cylidrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I incl brass float valve 20mm dia complete all as specified and directed. |
| 20 | S&F in repairs rotational moulded Polyethylene water storage tank tripled layered of capacity 1000 ltr (cylidrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I incl brass float valve 20mm dia complete all as specified and directed. |
| 21 | Disconnecting existing tanks n exc 500ltr capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. (Cleaning repairing etc. measured separately). |
| 22 | Disconnecting existing tanks capacity of exc 500ltr and nexc 100ltr , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.. (Cleaning repairing etc. measured separately). |
| 23 | Cleaning and removing all dirts and scales from service water tanks and from mouth of circulating pipes etc capacity of tank exceeding 250 ltr but not exceeding 500 ltr complete all as specified and directed. |
| 24 | All as per item no 23 above but exceeding 500 ltr but not exceeding 1000 ltr capacity complete all as specified and directed. |
| 25 | S&F in repair of 15mm bore valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed ( Min Weight 15mm-142 gms)complete all as specified and directed. |
| 26 | S&F in repair of 20mm bore valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed ( Min Weight 20mm-210 gms) complete all as specified and directed. |
| 27 | Taking up or down 15 mm dia old serviceable / unserviceable steel tubing any grade and connections cleaning for re-fixing or removal to store complete all as specified and directed . |
| 28 | All as per item no 27 above but 20mm bore complete all as specified and as directed. |
| 29 | S&F mild steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,for 15mm bore pipes complete all as specified and as directed. |
| 30 | All as per item no 28 above but 20mm bore complete all as specified and as directed. |
| 31 | M&L brick work in CM ( 1:4 ) with using sub class `B ` modular brick straight or curved on plan exceeding 6.0mtr mean radius complete all as specified and directed. |
| 32 | M&L brick work in CM ( 1:4 ) with using sub class `B ` modular half brick work straight or curved on plan exceeding 6.0 mtr mean radius complete all as specified and directed. |
| 33 | M&L for rendering 15mm thick in cement mortar 1:4 in layer ( 10 mm + 5mm ) mixed with PD proof 101 LW (OR +) of Dr fixit integral WP admixture (or equivalent from list of makes) @ 200 ml/bag of cement over two coats of super latex 302 of Dr Fixit (or equivalent from list of makes) in the ration 1:4:7 (one part super latex 302, 4 part water and 7 part cement) @ 1050 kg of homogeneous mixture per sqm in two coats and finished the surface even and fair without using extra cement complete all as specified and as directed.Note : Water Proofing compound shall be measured and paid separately |
| 34 | M&L for rendering 10 mm thick in CM ( 1:6 ) on wall/ concrete surfaces finish even and smooth without using extra cement complete all as specified and directed. |
| 35 | M&L for rendering 15 mm thick in CM ( 1:4 ) on wall/ concrete surfaces finish even and smooth without using extra cement using WPC compound at any description with necessary scaffolding of max height for G+2 Bldgs etc complete all as specified and directed.(Note:WPC shall be measured and paid separetly) |
| 36 | M&L for 5mm thick plaster on ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed . |
| 37 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 38 | M & L for preparation of new plastered surface of wall and applying two coats of oil emulsion distember over a coat of over a coat of cement primer over a coat of wall care putty 3mm thick complete all as specified and directed.Note: (i) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 39 | M & L for preparing new surfaces of wall and applying two coats of white wash on ceiling and cornices complete all as specified and directed. |
| 40 | M&L for preparation of new plastered/unplastered surface and finishing walls with Acrylic Smooth exterior paint of required shade as approved by GE with two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on walls over 3mm thick plaster of paris putty including necessary scaffolding for max height of G+2 bldg with parapet, etc complete all as specified and directed.Note:- (a) Each stage i.e. preparation of surfaces, application of primer, application of first coat, application of second coat will be got passed from Engr-in -Charge.(b) The acrylic emulsion paint work shall be carried out by using smart painting tools and techniques as specified in Particular Specifications and Contractor will have to produce necessary documents for purchase of smart painting tools or rent receipt of these tools along with bill/RAR.The bidders are requested take this aspect in consideration before quoting their rate and no claim on account of misunderstanding or otherwise shall be admissible on this account. (c) The painting is to be done in one or more shades as approved by GE. |
| 41 | M & L for preparation of new plastered surfaces of walls and applying two coat of cement based paint over a coat of cement primer complete all as specified and directed.Note: (i) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 42 | M&L for 75 mm thick PCC1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, sub base of floor, etc complete all as specified and directed |
| 43 | M&L for 25mm thick PCC (1:2:4) type B-0 using 12.50mm graded crushed stone aggregate as in sub base, levelling course, etc complete all as specified and as directed. |
| 44 | M&L for 40mm thick PCC type B1 (1:2:4) using 20 mm graded scrushed stone aggregate as in flooring complete all as specified and directed. |
| 45 | M & L for 75mm thick cement concrete 1:3:6 type C2, with using 40mm graded crushed stone aggregate as in floor/ plinth protection finish the surface even and smooth without using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary foRM work etc complete all as specified and as directed. |
| 46 | M&L for non –skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1: 6 complete all as specified and directed. |
| 47 | M&L for non –skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1: 6 complete all as specified and directed. |
| 48 | M&L for scratch free vitrified ceramic tiles 7-8mm thick (square or rectangular) area of each tile not exceeding 0.36 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. |
| 49 | All as per item no 48 above but as in skirting/ dado etc with and including 10mm thik backing coat in cement mortar 1:4 an wall complete all as specified and as directed. |
| 50 | M&L for glazed ceramic coloured tiles of size 300x450x7 mm & 300x200x7 mm thick as required on site, on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over 10 mm thick backing coat on fair faces of brick work in CM (1:4) complete all as specified and as directed. |
| 51 | M&L for chequered cement concrete tiles with grey cement and pigment of size 30cmX30cmX25mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 52 | M&L for cement concrete terrazzo tile in roof size of 25cmx25cmx20mm, machine pressed, set jointed and pointed in neat cement slurry with grey cement and no pigment , including well polished and girinding if required, etc complete all as specified and directed. |
| 53 | Dismantling of stone slab and tiles of any description or thickness in floors, aprons laid dry or bedded and pointed in any type of mortar complete all as specified and as directed. |
| 54 | M & L for machine cut kota stone slab flooring 20 to 25mm thick (size not less than 550mm x 550mm) laid & jointed with grey cement mixed with pigment to match the shade of slab including rubbing and mirror polishing finished laid over and including 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. |
| 55 | M & L for machine cut kota stone slab flooring 18 to 20mm thick as in riser of step, dado and skirting over and including 10mm thick 1:4 CM backing coat on vertical surface of wall with rubbing and mirror polishing finished complete all as specified and as directed. |
| 56 | M&L for 15-18 mm thick green marble of approved quality of any size set and jointed in grey cement slurry laid over and including 15 mm thick screed bed in CM (1:4) including granite polish to be done by mechanical grinder and moulding edges compete all as specified and as directed. |
| 57 | M&L for 18 mm thick Black granite slab of approved quality of any size bedded and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 15 mm thick screed bed in CM (1:4) including granite polish to be done by mechanical grinder and moulding edges complete all as specified and directed. |
| 58 | M&L in repair for 60mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size and colour confoRMing to IS 15658-2006 and laid over and including 25mm thick sand cushion complete all as specified and directed. |
| 59 | M&L for precast cement concrete type B-1 (1:2:4)(20mm graded crushed stone aggregate ) as in kerb and edging to road and footh path, etc including chamfered,weathering, throating etc and setting in CM (1:4) complete all as specified and directed. |
| 60 | S & F in repairs PVC (SWR) floor trap plain or multi with stainless steel grating incl joining to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified and directed. |
| 61 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 450 mm long complete all as specified and directed. |
| 62 | S & F in repairs 110mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trenches complete all as specified and directed. |
| 63 | S & F in repairs 75mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trenches complete all as specified and directed. |
| 64 | S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 65 | S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 66 | S & F 110 mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed. |
| 67 | S & F 75 mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed. |
| 68 | S& F in repair for 4 mm thick E Board claasic desinger of size 600x600mm as in false ceiling or similar work complete all as specified and directed. |
| 69 | S&F in repair PVC hollow wall panelling of required colour and design PVC sheet inclusive of solvent cement and fixing at site including PVC frame as per specifications, complete all as specified and directed. |
| 70 | S&F in repair fluted PCP (Polymer Composite Panel) wall/ceiling panels of approved make and shade, having fluted/grooved surface texture, made of high-quality polymer composite material, teRMite-proof, water-resistant and fire-retardant properties, including necessary framework of aluminium/galvanized iron sections, backing supports, screws, fasteners, adhesives, trims, mouldings and finishing accessories, complete all as specified and directed. |
| 71 | S & F in repairs false ceiling at all heights with GRG (Glass fibre Reinforced Gypsum) false ceiling tiles of size 595x595mm of approved texture, design and patterns having moisture content less than 2% humidity resistance of 99% NRCO.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (min) to be laid in true horizontal level suspended on inter locking metal T-grid of hot dipped galvanized iron section of 0.33mm thick ( galvanized @ 12a grams per sqm incl both sides ) comprising of main T runners of size 15x32mm of length 3000mm, cross T of size 15x32mm of length 1200mm and secondary inteRMediate cross T of size 15x32mm of length 600mm to foRM grid module of size 600x600mm, suspended from ceiling usung galvanized mild steel items (galvanizing @ 80 grams per Sqm) ie 50mm long 8mm outer diater M-6 dash fasteners 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85x25x2mm galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall / partition with the help complete all as specified and directed. |
| 72 | S & F in repairs GI frame snap grid frame work for for flase ceiling E board size 600 x 600mm x 6MM, inserted in GI/Alluminium frame as in celing main Tee section of size 36.5 mm x 25 mm x 1.4 mm thick, cross Tee section of size 23.5 mm x 26.4 mm x 1.4 mm thick, supported at ends all along the wall with aluminium anodised angle of size 40 mm x 25 mm x 2 mm thick and 4mm dia GI suspenders complete all as specified and directed. |
| 73 | S&F in repairs POP 12mm thick Seamless calcium silicate ceiling made out of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having philips head with under head cutter at 200mm center to centre including finishing thr joints of face board with specially foRMullated jointing compound and 48 mm wide fibre tape to provide seamless finish with 12 mm thick for seamless false ceiling fixed with screw over and including Gl frame work comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / inteRMediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the inteRMediate channel with connecting clips across the inteRMediate channel at 457 mm centre to centre complete as per manufacturer instruction complete all as specified and directed. |
| 74 | S & F in repairs for PVC and cupboard shelf/ partition/ frame / shutter of 18mm thick side of panel externally impact perfact finish to the shutter and joined together with solvent cement adhesive 8mm thick (4mmx2)x12mm wide PVC sheet is used as gap insert for top & bottom rail, 18mm x 1mm PVC edge lipping is done on top & bottom side using PVC solvent cement adhesive, incl hasp and stable for locking purpose, piano hinge and ss handles complete all as specified and directed. |
| 75 | S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beading in square not exceeding 0.50 sqm in each panes including hacking out old broken glass ( any tickness size ,quality or description ) from wooden frame or steel frame etc and complete all as specified and directed. |
| 76 | S&F 3.00 mm thick sheet glass figured glass pin head type and glazing with oil putty or wooden beading in square not exceeding 0.50 sqm in each panes including hacking out old broken glass ( any tickness size ,quality or description ) from wooden frame or steel frame etc and complete all as specified and directed. |
| 77 | S&F 5.50 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beading in square not exceeding 0.50 sqm in each panes including hacking out old broken glass ( any tickness size ,quality or description ) from wooden frame or steel/aluminium frame etc and complete all as specified and directed. |
| 78 | S&F in repair Aludecor Designer Aluminium Composite Panel (ACP) 6mm thick any colour fixed over aluminium/steel frame in wall clading etc including filling of joints with silicon adhesive complete all as specified and directed. |
| 79 | S&F in repair Aluminium Composite Panel (ACP) 6mm thick any colour fixed to aluminium frame with rubber beading/gaskit or aluminium glazing clip from both sides complete all as specified and directed. |
| 80 | Resecuring or easing & adjusting, without taking down, shutters of any description n.exc 1.00 sqm each in same opening complete all as specified and directed. |
| 81 | Resecuring or easing & adjusting, without taking down, shutters of any description exc 1.00 sqm but n.exc 2 sqm each in same opening complete all as specified and directed. |
| 82 | M&L for cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggregatre as in surface channels and drains complete all as specified and as directed. |
| 83 | Extra for forming fair finished surfaces of drain 30 cm inner girth in cement concrete using extra cement including foRMs mouldy mittered/ stopped ends complete all as specified and as directed.. |
| 84 | S&F in repair for 15mm bore bib taps chromium plated with crutch or butterfly handle ,screwed down , screwed for iron pipes or brass ferrule complete all as specified and directed. |
| 85 | S&F in repair stop valves fancy type chromium plated with long shanks fixed with 15 mm dia bore pipes complete all as specified and as directed. |
| 86 | S&F in repair pillar taps (swan neck type) cast copper alloy with capstan head, screwed down, high pressure with long screwed shanks and fly nuts fixed in 15 mm bore pipes complete all as specified and directed. |
| 87 | S&F in repair CP angle stop cock of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified and directed. |
| 88 | S&F in repair CP mixer for mixing hot & cold water screwed down for iron pipe 15mm bore complete all as specified and directed. |
| 89 | S&F in repair 125 mm size chromium plated shower rose with siwel joint suitable for 15 mm bore GI pipes complete all as specified and directed. |
| 90 | S&F in repair vitreous china wash down water closet pedestal pattern white excluding flushing cistern and flush pipes complete all as specified and directed. |
| 91 | S&F in repair vitreous china squatting pan `Orissa ' pattern of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipes) including connection to trap and to flush pipe etc and lime concrete bedding including 'P' or 'S' trap complete all as specified and directed. |
| 92 | M&L in repairs PVC valve less,syphonic action type flushing cistern,low level ,white with inlet ball valve,float and handle including brackets and connection to pipe and fixing of chain and pull or lever if any complete all as specified and directed. |
| 93 | S&F in repair CP health faucet with flexible pipe of one mtr length including wall hook for EWC complete all as specified and directed. |
| 94 | S&F in repair vitreous china wash hand basin white flat back, size 550x400 mm including bracket but excluding taps, waste pipes, chain and plug etc complete all as specified and directed. |
| 95 | S&F in repair vitreous china urinal bowl urinal flat back, size of 465x355x265mm white (min)with grating and union for discharge pipe, urinal spreader with waste pipe and all fiting for urinal complete all as specified and directed. |
| 96 | S&F stainless steel bottle trap for urinal and wash hand basin waste water outlet incl necessary fittings and connect to drain pipe, etc complete all as specified and directed. |
| 97 | Taking down cement plaster or decayed portision of concrete from ceiling, chajja, upward facia, downward facia in any position, any height (upto 3nd floor) and making good by, rendering 15mm thick with CM 1:4 or PCC 1:2:4 type B1 (using 20mm graded aggtregate) as in ceiling or concrete surfaces such as chajja, upward facia, downward facia and similar work finished even and fair including dubbing coat without use extra cement upto, any height ( upto 2nd floor) including necessary scafolding complete all as specified and directed. |
| 98 | Demolition of reinforced cement concrete of any description and in any position not otherwise described comlplete all as specified and directed. |
| 99 | M&L RCC type B-1 1:2:4 using 20mm graded crushed stone aggregate as in kitchen shelves , manhole cover, etc complete all as specified and directed. |
| 100 | M&L foRM work to suspended slab as in kitchen shelves, cubboards, drain slab etc.complete all as specified and directed. |
| 101 | M&L TMT bar 10 mm dia and over, cut to length, bent to shape required ,including cranking ,bending spirally for hooping for columns,hooking end and binding with and including mild steel wire and annealed not less than 9 mm dia or securing with clips complete all as specified and directed. |
| 102 | Removal of exisiting treatment on ceiling including preparation and applying two coat of white wash on ceiling complete all as specified and directed. |
| 103 | Preparation of old decorated plastered surfaces or un-plastered surfaces of wall and applying one coat of Oil emulsion distemper complete all as specified and as directed .Note : (i) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 104 | Removal of existing treatment and preparation of old decorated plastered surfaces or un-plastered surfaces of wall and applying two coat of oil emulsion distemper complete all as specified and directed.Note : (i) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 105 | Complete removal of existing treatment and applying two coat of synthetic enamel paint on wooden surfaces of any description over 10 cm width or girth complete all as specified and directed. |
| 106 | Complete removal of existing treatment and applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth complete all as specified and directed. |
| 107 | M&L for complete removal of existing treatment (any number of layers) on walls scrapping with steel scrapper or any other means,including filling depression of scrapped surface ,priming plaster and other old surface with alkali resistant priming paint and applying two coat of cement base paint all as specified and directed.Note : (i) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 108 | M&L for preparation of old decorated plastered or unplastered surface including complete removal by brooming down with steel wire brushing, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and finishing walls with Acrylic Smooth exterior paint of required shade as approved by GE with two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on walls over 3mm thick plaster of paris putty including necessary scaffolding for max height of G+2 bldg with parapet, etc complete all as specified and directed.Note:- (a) Each stage i.e. preparation of surfaces, application of primer, application of first coat, application of second coat will be got passed from Engr-in -Charge.(b) The acrylic emulsion paint work shall be carried out by using smart painting tools and techniques as specified in Particular Specifications and Contractor will have to produce necessary documents for purchase of smart painting tools or rent receipt of these tools along with bill/RAR.The bidders are requested take this aspect in consideration before quoting their rate and no claim on account of misunderstanding or otherwise shall be admissible on this account. (c) The painting is to be done in one or more shades as approved by GE. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jun 30, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 07, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysJul 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender