|
| 1 | Rewinding of V.T. motor & boosting motor (Centrifugal motor) Kirloskar make/Equivalent make as per orignal winding 415 volt with super enamelled copper wire as required gauge complete all respect as per direction of E/I. It is also include the dismentling/Refixing/catage from site to workshop/Factory and vice versa. the old material will the property of conctractor (old material rate already deducted in AOR) |
| 2 | a) 40 HP, 1440 RPM |
| 3 | b) 100 HP, 1440 RPM |
| 4 | c) 5 HP, 2800 RPM |
| 5 | S/F Thurst bearing No. 7220 (Make SKF,Kayo NTN or similar) |
| 6 | S/F ball bearing No. 6311 (Make SKF,Kayo NTN or similar) |
| 7 | S/F Thurst bearing No. 320 (Make SKF,Kayo NTN or similar) |
| 8 | S/F Ball bearing No. 6316 (Make: SKF, Kayo, NTN or similar) |
| 9 | Rewinding & Repairing of Transformer Kirloskar Make/Equivalent make as per orignal winding 11/.433 k.Volt with super enameled copper wire as required gauge complete all respect as per direction of E/I. It is also include the dismantling/Refixing/Cartage from site to workshop/factory and vice versa. The old material will the property of contractor (Old material rate already deducted in AOR) |
| 10 | a) 63 KVA |
| 11 | b) 250 KVA |
| 12 | c) 400 KVA |
| 13 | Supply Filling fresh Transformer oil. |
| 14 | Painting of the electric pole with 2 coats of aluminium paint over red oxide primer complete in all respect. |
| 15 | Repairing of Fully automatic starter for 100 HP non clog submersible motor changing of folloeing item- |
| 16 | S/F of MNX 225 Amp. Conductor make L&T make. |
| 17 | S/F of 250 Amp. MCB TPN make L&T make. |
| 18 | S/F of Timer make L&T make |
| 19 | S/F of VPD make soft hard |
| 20 | S/F of MPD make soft hard |
| 21 | S/F of Control Transformer make Electra care/Pioneer |
| 22 | S/F of Winding Team Relay make Minilec |
| 23 | Auto Transformer suitable for 100 HP Induction Motor. |
| 24 | Repairing of Fully automatic starter for 50 HP as per following item- |
| 25 | S/F of MNX 110 Amp. Conductor make L&T make. |
| 26 | S/F of 125 Amp. MCB TPN make L&T make. |
| 27 | S/F of Timer make L&T make |
| 28 | S/F of VPD make soft hard |
| 29 | S/F of MPD make soft hard |
| 30 | S/F Control Transformer make Electra care/Pioneer |
| 31 | S/F of Winding Team Relay make Minilec |
| 32 | Auto Transformer suitable for 50 HP induction motor starter |
| 33 | S/F of 200 Amp. four pole change over switch on 50x50x6mm angle iron frame including the cost of labour, T&P, painting and other material requried for proper completion of the work as per direction and satisfaction of E/I. |
| 34 | S/F of 400 Amp. four pole change over switch on 50x50x6mm angle iron frame including the cost of labour, T&P, painting and other material requried for proper completion of the work as per direction and satisfaction of E/I. |
| 35 | S/F of 200 Amp. 415 V Metal clad TPN CFS complete with HRC fuse etc. on angle iron frame complete in all respect. 'CAT-B' |
| 36 | S/F of 400 Amp. 415 V Metal clad TPN CFS complete with HRC fuse etc. on angle iron frame complete in all respect. 'CAT-B' |
| 37 | Supply & Fixing Flat Cable 35 Sqmm. 3 Core Finolex make. |
| 38 | Supply & Fixing Flat Cable 25 Sqmm. 3 Core Finolex make. |
| 39 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. |
| 40 | 70 sqmm 3½ core |
| 41 | 120 sqmm 3½ core |
| 42 | 400 sqmm 3½ core |
| 43 | Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. |
| 44 | 25 Sqmm |
| 45 | 35 Sqmm |
| 46 | 50 Sqmm |
| 47 | 70 Sqmm |
| 48 | 120 Sqmm |
| 49 | 240 Sqmm |
| 50 | 400 Sqmm |
| 51 | Supply and fixing of recess mounting round 15 to 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/Reflector and driver set complete in all respect. CAT-AAA |
| 52 | Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect. CAT-AAA |
| 53 | S/L of 3 core standered aluminium conductor XLPE (cross linked polythene) insulated PVC bedded, Galvanised flat steel strip aroured cable confirming to IS : 7098 (Part-II with latest amendmrnts) 11 KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand alround and protected with well burnt bricks on sides and on top put across. The armourning of cable shall be properly connected with earth conductor by clamps etc. |
| 54 | a) 120 sqmm 3 core |
| 55 | Supply & errection of overhead line with ACSR conductor on poles/service bracket including bindng etc. complete in all respects. |
| 56 | S/F ratchet plate with goli as per requirment of V.T. motor at site as per direction of E/I. |
| 57 | S/F of fully Automatic Control panel Starter for 100 H.P. non clog submersible/V.T. Pump sets with following features No-volt, Under-voltage protection, Electronic Overload protection, seal monitor, reverse rotation trip device and the automatic start/stop device according to the levels in the sump. The control panels are provided with normal indications such as Digital voltmeter, Digital Ammeter and indicating lamps as per directions of E/I. (1. MNX 225 Amp. Contractor Make L&T, 2. 250 Amp. MCB TPN Make L&T, 3. Timer Make L&T, 4. VPD Make Soft Hard, 5. MPD Make Soft Hard, 6. WLC/Seal Moniter, Make Pump Care/Kishor, 7. Winding Temp Relay Make Minilec, 8. Auto Transformer suitable for 100 HP Induction Motor starting application, tapping at 50%, 60% & 65% of startes per hour will be four starting time 30 Sec., 9. Controlling instrument & Fabricating work of panel board i/c ASS, VSS, CTs, Protection, indicating lamps, fiber sheet, Aluminium Busbar, control & Power wiring 1.5 sqmm & 25 Sqmm. Thimble, Ferrules etc. & 14 SWG Cubical Panel Board with Powder Coating Paint. |
| 58 | S/F 63 Amp 3 Pole MCCB TM Type, 36 KA (Make L & T C-POWER/D-SINE) / SIEMENS (3WL/VL) / SCHNIEDER (MASTERRPACT / NSX) |
| 59 | S/F of Indicating light (Blue & White) (MAKE-ESBEE / SIEMENS/ SCHNIEDER) |
| 60 | S/F of Push Button (MAKE-ESBEE / SIEMENS/ SCHNIEDER) |
| 61 | S/F of Ampere meter (MAKE- AE / PROCOM /CONZRVE) |
| 62 | S/F of Voltmeter (MAKE- AE / PROCOM /CONZRVE) Please Enable Macros to View BoQ information |
