|
| 1 | P/F M.S. specials such as Tee, bend, collars, Tapers, Gap pieces, including flange ends as required painting, Cutting, welding as per site requirement of MS pipe thickness etc.complete in all respect as per direction of E/I. |
| 2 | Hire Charge of Generator (Including cost Service of operating staff, supply of lubricating oil and diesel also) D.G. Set/Generator 50 KVA |
| 3 | Hiring of Gas Cutting Set with Oxygen and LPG Running Time @ 6 Hrs. |
| 4 | Hiring of Welding Set Running Time @ 6 Hrs. |
| 5 | Providing and fixing sluice valve Shall generally conform to IS 14816 with latest amendment , with length over flanges as per PD of IS14846 corresponding to BS EN - 558/ISO 5752 Basic Series 3 in CI construction having metal seating ( IS 318 Gr. LTB 2) with complete Component & Material of construction following below :- |
| 6 | 1 - Body / Door / Dome - Cast Iron IS 210 Gr. FG260 |
| 7 | 2 - Spindle - Non rising, Stainless Steel AISI 410 |
| 8 | 3 - Body seat / Door face - Gun metal : IS 318 Gr. LTB 2 ( risngs to be press fitted and riveted ; no screws allowed) |
| 9 | 4 - Rivets - Soft annealed brass |
| 10 | 5 - Spindle Nut - Gun metal : IS 318 Gr. LTB 2 |
| 11 | 6 - Stem seal - Greased Hemp |
| 12 | 7 - Fasteners - Carbon steel |
| 13 | 8 - Flange Drilling - IS 1538 Table 4&6 |
| 14 | 9 - PN 1.0 |
| 15 | 10 - Accessories ( 400 mm and above ) - Ball thrust bearings to be housed above the wet chamber ie. Above the gland. Enclosed Spur Gear Box for ease of operation. Air Plug |
| 16 | 11 - Painting / Coating - Inside & Outside epoxy liquid coated ; DFT minimum 250 micron, shade RAL 5005/5015 (BLUE) |
| 17 | 12 - Hydro-test - ( Open Ended only ) Seat : 10/16 Kg/cm2; Body: 15/24 Kg/cm2 |
| 18 | 13 - Upto 600 mm dia Manual Operated & abov 600 mm Gear box Make- Indian Valve Pvt. Ltd. (IVC) / Kirloskar Brothers Limited (KIRLOSKAR) |
| 19 | a) 300 mm dia Kirloskar make |
| 20 | b) 600 mm dia Kirloskar make |
| 21 | P/F Reflex Valves upto 600mm dia Shall conform to IS 5312 Part 1 & above to IS 5312 Part-2 with latest amendment, Valves shall be in graded CI with metal to metal (IS 318 Gr. LTB 2) seating, preferably slnted (and not perpendicular) vis-à-vis horizontal axis, SS AISI 410 stub pins & slant seat design. with complete component & material of Construction following below :- |
| 22 | 1 - Body / Door / Dome - Cast Iron IS 210 Gr. FG260 |
| 23 | 2 - Hinge pin (single door)/Stub pin (multidoor type) - SS AISI 410 |
| 24 | 3 - Seat & Face rings- Gun metal IS 318 Gr. LTB 2 |
| 25 | 4 - Rivets - Soft annealed brass |
| 26 | 5 - Fasteners - Carbon steel |
| 27 | 6 - Flange Drilling - IS 1538 Table 4 |
| 28 | 7 - PN 1.0 |
| 29 | 8 - By-pass arrangement - Optional |
| 30 | 9 - Painting/Coating inside & Outside epoxy liquid coated; DFT minimum 250 micron, shade RAL 5005/5015 (BLUE) |
| 31 | 10 - Hydro-test Seat: 10/16 Kg/cm2;Body : 15/24 Kg/cm2 Make-Indian Valve Pvt. Ltd. (IVC)/Kirloskar Brothers Limited (Kirloskar) |
| 32 | a) 300 mm dia Kirloskar make |
| 33 | Supply of Crane 20 tonne capacity at sitein hire basis including cost of diesel and driver etc. complete in all respect as per direction of E/I. |
| 34 | S/F of fully Automatic Control panel with 100 H.P. star delta starter for submersible/V.T. Pump sets with following features No-volt, Under-voltage, Over-voltage protection, Micloprocessor based overload protection, Unbalancing protection, Winding temperature controllrr. seal monitor, reverse rotation trip device and the automatic start/stop device according to the levels in the sump. The control panels are provided with normal indications such as Digital voltmeter, Digital Ammeter, and indicating lamps. Above panel is dust and vermin proof made out of 14 SWG CRC sheet with powder coating paint as per directions ofE/1, (Make: single Contractor-L &T, MCCB-L&T, WTC-Minilec, phase prienter WLC/SM-Pumpcare C.T.-AE, Indicating Light & Push Button- L&T, Control Fuse-EE, Fuse Base-EE, Timer-L&T) |
| 35 | Design, Supply, erection, testing and commissioning of MCC (Motor Control Center). Panel made out of 14-16 SW CRCA, sheet Powder Coated paint after degreasing, de rusting & vennin proof firee standing, front operated cubical panel board suitable for 415 Volt, 50 Hz system having incoming of 800 Amp. MCCB, 800 Amp Changes voer swich & out goning 250 Amp. MCCB with Motor protection relay having 3 nos aluminium bus bars of 1000 Amp. capacity for three phase & one aluminium bus bars of half capacity for neutral &One no out going for 63 Amp. TPN for lighting & external uses with volt meter Amp. meter, selector swich, incating lamps etc. ( Make : MCCB/change over - L&T/ schinder/ABB Meter--L&T A.E., Salector Swich - L&T, Current Transformer A.E.) |
| 36 | Supply, Erection, Testing & Commissioning of Non Clog Sewage Submersible Pump Set complete in all respect as per direction of Engineer in Charge. Technical Specification of Pump Set shall be given below- |
| 37 | Motor Type-SQ. Cage Induction Motor 960 RPM suitable for operation on 400/440 volts, 3 phase, 50 Hz AC Supply with 'F' Class Insulation & IP-68 protection. |
| 38 | Pump-a) Body-Cast Iron with 2% Nickilb) Impeller-CF8M(SS316)c) Shaft-Stainless Steeld) Auto Coupling Stand-CF8M (SS316)e) Guide Pipe- Stainless Steel (SS304) @ 16 Mtr.f) Lifting Chain-alloy Steel @ 16 Mtr.G) Mechanical Seal-Upper Seal (Carbon/Crome Steel), Lower Seal (Silicon Carbide) |
| 39 | Field Requirement-a) Type-Non Clog Sewage Submersible Pumpb) RPM- 960c) Head- 28 Mtr.d) Copper Cable for Sewage Submersible Pump Suitable Size @ 25Mtre) Specific Gravity of Sewage-1.07f) Solid Handling Capacity (Dia)- Not less than 100 mmNote-Contractor shall be submitted G.T.P. & all compony test certificate of the material used in pupm set. (Make-Pullen Pump Industries Pvt. Ltd/A.s aqua Machineries Pvt. Ltd/M/s Kishor Pumps Pvt. Ltd. |
| 40 | Non Clog Sewage Submersible Pump Set Discharge 432 cum/hr, HEAD:-28Mtr, Rating 60/80, Outlet size of pipe 200mm dia, Cable 2 x 50 sqmm x 3.50 core + 1.50 sqmm x 4.0 core (2 + 1) |
| 41 | PVC Flexible cables copper conductor 1100V conforming to 694/1990 double sheathed circular rate including excise duty, sales tax (Make- Tridev Electricals/uttam Engineering Works / Sweta Eclectricals) |
| 42 | 35sqmm X 4 core |
| 43 | S/L of Al. conductor PVC insulated armoured served, sheathed cable 1100 V grate at a depth of below ground level over a cushion of 75mm below ground level over a cushion of 75mm thick sand alround protected with burnt brick on sides and on top. On surface the cable run shall be fixed on MS clamps etc. of suitable size or as directed by E/I complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. |
| 44 | 120 sqmm 3½ core |
| 45 | 240 sqmm 3½ core Please Enable Macros to View BoQ information |
