|
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10mm to 25mm.15.23.1. |
| 2 | Providing and laying Vitrified floor tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20 mm thick cement Mortar 1:4 (1 cement 4 Coarse Sand) jointings with Grey Cement Slurry @3.3 kg/Sqm including Grouting the joints with white Cement and matching Pigments etc. Complete.(Size of Tile 600X600mm). DAR-11.41.2 . |
| 3 | Treatment of existing masonry using chemical emulsion @one litre per hole,300mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 Coarse sand ) to the full depth of the hole with Chlorpyriphos /Lindane E.C 20% with 1% concentration. S.I-2.35.4.1 |
| 4 | Taking out doors,window and clerestory window (steel or wood) shutter including stacking within 50 meters lead:of Area 3sqm and below.15.13.1 |
| 5 | 15 mm thick Cement Plaster 1:3 (1 cement : 3 coarse sand) finished with a floating coatof neat cement on the rough side of single or half brick wall. DSR-13.10. |
| 6 | Providing and fixing 20mm dia Chlorinated polyvinyl chloride (cpvc)pipes having thermal stability for hot & cold water supply including the supply with clamps at 1.0m spacing.This includes jinting of pipe and fitting with one stepsolvent cement and testing of joints complete as per direction of Engineer-in-charge-exposed on wall(18.7.2). |
| 7 | Providing and fixing 25mm dia Chlorinated polyvinyl chloride (cpvc)pipes having thermal stability for hot & cold water supply including the supply with clamps at 1.0m spacing.This includes jinting of pipe and fitting with one stepsolvent cement and testing of joints complete as per direction of Engineer-in-charge-exposed on wall(18.7.3). |
| 8 | Providing and fixing 1st quality ceramic glazed walls tiles conferming to IS:15622 (thickness to be specified by the manufacturer ) of approved make, in all colours shade except burgundy , bottel green , black of any size as approved by engineer -in -charge , in skirting risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand ) and jointing with grey cement slurry @ 3.3 Kg per sqm including pointiong in white cement mixed with pigment of matching shade complete (DSR-8.31) |
| 9 | Providing and laying Rectifited Glazed Ceramic floor tiles of Size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with Grey cement Slurry @3.3kg/Sqm including Grouting the Joints with and matching pigment etc., complete. (DSR-11.39) |
| 10 | Providing and fixing ISI marked 35mm thick flush door shutters conforming to IS : 2202 (Part I) non-decorative type,core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including butt hinges with necessary.(DAR-9.21.1) |
| 11 | Providing and fixing C.P. Brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 (15 mm nominal bore)18.53.1 |
| 12 | Providing and fixing C.P. Brass stop cock ( concealed) of standard design and of approved make conforming to IS 8931 (15mm nominal bore ) 18.52.1 |
| 13 | Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete.DAR (17.28).semi rigid pipe 32mm dia.DSR (17.28.1.1 ). |
| 14 | Providing and fixing C.P Brass long body bib cock of approved quality conforming to Isstandards and weighing not less than 690gms.(15mm nominal bore). 18.51.1. |
| 15 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen Sink as per IS : 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040 mm bowl depth 250 mm. (17.10.1.1). |
| 16 | Structural Steel work riveted bolted or welded in built up section,trusses,Builds up gates,framed work including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer all complete.DAR-10.2. |
| 17 | Providing and fixing fly proof wire gauze to windows ,clerestory windows and doors with M.S Flat 15x3 mm, stainless steel (Grade 304)wire gauze of 0.5 mm dia wire and 1.4mm aperture on both sides and nuts & bolts complete.(10.29.2). |
| 18 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. DSR-1.1.18 Please Enable Macros to View BoQ information |
