|
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10mm to 25mm.15.23.1 |
| 2 | Taking out doors,window and clerestory window (steel or wood) shutter including stacking within 50 meters lead:of Area 3sqm and below.15.13.1 |
| 3 | Providing and fixing ISI marked 35mm thick flush door shutters conforming to IS : 2202 (Part I) non-decorative type,core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including butt hinges with necessary.(DAR-9.21.1) |
| 4 | Providing and fixing 1st quality ceramic glazed walls tiles conferming to IS:15622 (thickness to be specified by the manufacturer ) of approved make, in all colours shade except burgundy , bottel green , black of any size as approved by engineer -in -charge , in skirting risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand ) and jointing with grey cement slurry @ 3.3 Kg per sqm including pointiong in white cement mixed with pigment of matching shade complete (dar-8.31) |
| 5 | Providing and laying Rectifited Glazed Ceramic floor tiles of Size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with Grey cement Slurry @3.3kg/Sqm including Grouting the Joints with and matching pigment etc., complete. (DAR-11.39) |
| 6 | 15 mm thick Cement Plaster 1:3 (1 cement : 3 coarse sand) finished with a floating coatof neat cement on the rough side of single or half brick wall. DSR-13.10. |
| 7 | Providing and fixing 20mm dia Chlorinated polyvinyl chloride (cpvc)pipes having thermal stability for hot & cold water supply including the supply with clamps at 1.0m spacing.This includes jinting of pipe and fitting with one stepsolvent cement and testing of joints complete as per direction of Engineer-in-charge-exposed on wall(18.7.2). |
| 8 | Providing and fixing 25mm dia Chlorinated polyvinyl chloride (cpvc)pipes having thermal stability for hot & cold water supply including the supply with clamps at 1.0m spacing.This includes jinting of pipe and fitting with one stepsolvent cement and testing of joints complete as per direction of Engineer-in-charge-exposed on wall(18.7.3). |
| 9 | Providing and fixing C.P. Brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 (15 mm nominal bore)18.53.1 |
| 10 | Providing and fixing PTMT Soap Dish holder having length of 138 mm , breadth 102 mm , height of 75 mm with concealed filling arrangement , weighing not less than 106 gms (18.65) |
| 11 | Providing and fixing of glass shelf 7/32'' thick 600x130 mm size with C.P. Guard Rail of standard size and bracket with 40mm long screws,rawl plugs etc,complete.DSR-17.33. |
| 12 | Providing and fixing PTMT towel rail 450 mm long with total length of 495mm,78mm wide and effective height of 88mm,weighing not less than 170 gms complete with brackets fixed to wooden cleats with C.P brass screws with concealed fittings arrangement of approved quality and color..DSR-17.73.1. |
| 13 | Providing and fixing C.P. Brass stop cock ( concealed) of standard design and of approved make conforming to IS 8931 (15mm nominal bore ) 18.52.1 |
| 14 | Providing & fixing C.P. wall mixture 15mm dia with 115mm long bend pipe for connection to overhead shower (with bush &piston divertor fitting) Aerotor (L&K,Jaquar ESSCO,Cera,Hindware) including supply of all material,labour,T&P etc,required for proper completion of the work.DSR-17.22B. |
| 15 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass Screws and washers complete. (17.31). |
| 16 | Providing and fixing C.P Brass bib cock of approved quality conforming to IS:8931,15 mm nominal bore for proper completion of the work.DSR 18.49.1. |
| 17 | Providing and fixing 8 mm dia C.P./S.S. jet with flexible tube upto 1 meter long with S.S. trangular plate to Eureopean type W.C. of quality and make as approved by Engineer-in- charge. (DSR-17.16A). |
| 18 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standard and weighing not less than 690 gms , (15 mm nominal bore) 18.51.1 |
| 19 | Providing and fixing wash basin with C.l. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. White Vitreous china Wash basin Size-630x450 mm with a Pair 15 mm C.P. brass pillar taps. (17.7.1) |
| 20 | Providing and fixing PVC low level flushing cistern with manually controlled device (handle lever) Conforming to IS : 7231 with all fittings and fixtures complete. 10 litre capacity white. (17.18.1). |
| 21 | Providing and fixing white Vitreous china Pedestal type (European type/wash down type) water closet pan. (17.15). Please Enable Macros to View BoQ information |
