|
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10mm to 25mm.15.23.1. |
| 2 | Treatment of existing masonry using chemical emulsion @one litre per hole,300mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 Coarse sand ) to the full depth of the hole with Chlorpyriphos /Lindane E.C 20% with 1% concentration. S.I-2.35.4.1 |
| 3 | Taking out doors,window and clerestory window (steel or wood) shutter including stacking within 50 meters lead:of Area 3sqm and below.15.13.1 |
| 4 | 15 mm thick Cement Plaster 1:3 (1 cement : 3 coarse sand) finished with a floating coatof neat cement on the rough side of single or half brick wall. DSR-13.10. |
| 5 | Providing and fixing Chlorinated polyvinyl chloride (cpvc)pipes having thermal stability for hot & cold water supply,including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.0m spacing.This includes jointing of pipes and fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge.Concealed work,including cutting chases and making good the walls etc.,20mm nominal dia pipes.(18.8.2). |
| 6 | Providing and fixing Chlorinated polyvinyl chloride (cpvc)pipes having thermal stability for hot & cold water supply,including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.0m spacing.This includes jointing of pipes and fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge.Concealed work,including cutting chases and making good the walls etc.,25mm nominal dia pipes.(18.8.3). |
| 7 | Providing and fixing 1st quality ceramic glazed walls tiles conferming to IS:15622 (thickness to be specified by the manufacturer ) of approved make, in all colours shade except burgundy , bottel green , black of any size as approved by engineer -in -charge , in skirting risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand ) and jointing with grey cement slurry @ 3.3 Kg per sqm including pointiong in white cement mixed with pigment of matching shade complete (DSR-8.31) |
| 8 | Providing and laying Rectifited Glazed Ceramic floor tiles of Size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with Grey cement Slurry @3.3kg/Sqm including Grouting the Joints with and matching pigment etc., complete. (DSR-11.39) |
| 9 | Providing and fixing ISI marked 35mm thick flush door shutters conforming to IS : 2202 (Part I) non-decorative type,core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including butt hinges with necessary.(DAR-9.21.1) |
| 10 | Providing and fixing C.P. Brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 (15 mm nominal bore)18.53.1 |
| 11 | Providing and fixing PTMT Soap Dish holder having length of 138 mm , breadth 102 mm , height of 75 mm with concealed filling arrangement , weighing not less than 106 gms (18.65) |
| 12 | Providing and fixing 600x120x5 mm glass shelf with edges roundoff,supported on anodised aluminium angle frame with C.P brass brackets and guard rail complete fixed with 40 mm long screws,rawl plugs etc,complete.DSR-17.33. |
| 13 | Providing and fixing PTMT towel rail 450 mm long with total length of 495mm,78mm wide and effective height of 88mm,weighing not less than 170 gms complete with brackets fixed to wooden cleats with C.P brass screws with concealed fittings arrangement of approved quality and color..DSR-17.73.1. |
| 14 | Providing and fixing PTMT towel ring trapezoidalshape 215mmlong,200mm wide with minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and color,weighing not less than 88gms.DSR 17.72. |
| 15 | Providing and fixing C.P. Brass stop cock ( concealed) of standard design and of approved make conforming to IS 8931 (15mm nominal bore ) 18.52.1 |
| 16 | Providing & fixing C.P. Brass Single lever telephonic wall mixture of 15mm dia with quality and make as approved by Engineer-in-charge. DSR-17.22B. |
| 17 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:150 mm diameter.DSR-18.22.2 |
| 18 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass Screws and washers complete. (17.31). |
| 19 | Providing and fixing C.P Brass extension nipple (size15mm*50mm) of approved make and quality as per direction of Engineer in charge.DSR 18.53A. |
| 20 | Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete.DAR (17.28).semi rigid pipe 32mm dia.DSR (17.28.1.1 ). |
| 21 | S/F 15mm dia C.P Brass two way bib cock,Parryware make (Primo Two Way Bib cock) Code N0.-G3234A1,including supply of all material ,labour T&P etc.complete. |
| 22 | S/F 15mm dia C.P Brass Bib cock,Parryware make (Primo Bib cock) Code N0.-G3204A1,including supply of all material ,labour T&P etc.complete. |
| 23 | Providing and fixing wash basin with C.l. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. White Vitreous china Wash basin Size-630x450 mm with a Pair 15 mm C.P. brass pillar taps. (17.7.1) |
| 24 | Providing and fixing PVC low level flushing cistern with manually controlled device (handle lever) Conforming to IS : 7231 with all fittings and fixtures complete. 10 litre capacity white. (17.18.1). |
| 25 | Providing and fixing white Vitreous china Pedestal type (European type/wash down type) water closet pan. (17.15). |
| 26 | S/F 15mm dia CP health faucet with 8mm dia 1.20meter long flexible tube & wall hook,Parryware make (Primo Health Faucet) Code N0.-E8383A1,including supply of all material ,labour T&P etc.complete. |
| 27 | Providing and fixing 8 mm dia C.P./S.S. jet with flexible tube upto 1 meter long with S.S. trangular plate to Eureopean type W.C. of quality and make as approved by Engineer-in- charge. (DSR-17.16A). |
| 28 | Providing and fixing white Vitreous china water closet squatting pan (Indian type) Orissa pattern W.C, Pan of size 580 x440 mm (17.13.2). |
| 29 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen Sink as per IS : 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040 mm bowl depth 250 mm. (17.10.1.1). |
| 30 | Providing and Fixing 18 mm thick gang saw cut, Mirror Polished, Premoulded and Prepolished, Machine cut for Kitchen Platform, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base Cement Mortar 1:4 (1 Cement: 4 Coarse Sand) joints treated with white cement mixed with matching pigment epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black/ruby red (DAR-8.2.2.2). |
| 31 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. DSR-1.1.18 Please Enable Macros to View BoQ information |
