|
| 1 | CIVIL WORKS |
| 2 | Excavation in dumped stone or malba including stacking of unserviceable material separately and disposal of unserviceable material. Lead up to 50 m and lift up to 1.5 m, disposed material to be neatly dressed in all kinds of soils. |
| 3 | Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within all lead. |
| 4 | Cement concrete 1:4:8 with brick balast 40mm gauge mixing by mechanical means using concrete mixer volumetric type |
| 5 | First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth |
| 6 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. |
| 7 | Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels. |
| 8 | Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 550 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete |
| 9 | First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level. |
| 10 | 12.5 mm thick cement plaster 1:4 |
| 11 | 20mm thick cement plaster 1:4 in two coat work |
| 12 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using Acryllic Wall Putty by applying two or more coats to get required finish including priming coat to make an even surface before applying Acrylic wall putty on new plastered surface.Complete as per specifications |
| 13 | Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two or more coats applied @ 1.43litre/10 Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm |
| 14 | Steel work in built up tubular (round, square or rectangular hollow tubes etc. ISI Marked) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete having span Up to 15.00 Mtr. Span |
| 15 | Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. |
| 16 | Earth filling with good quality earth obtained from out side the plinth including compensation of earth, loading, unloading, carriage from outside the peremises to site of work, spreading, laying watering compacting with rammer complete as per specifications. |
| 17 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per technical clause 406 of MORT&H specifications |
| 18 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge IS Code: 15658 (2006) |
| 19 | Providing and fixing Grass Matt high density with Chemical Adhesive complete in all respects and satisfaction of Engineer-in-Charge |
| 20 | Providing and fixing of Galvanised Steel Chain Linked fencing fabric with both end of Fabric knoked of Mesh size 100+-5mm, Nomial dia os Mesh wire 4 mm, wire 4.5mm complete in all respects and satisfaction of Engineer-in-Charge |
| 21 | Providing and fixing Net for covering of ground (waved polyster this threades) complete in all respects and satisfaction of Engineer-in-Charge |
| 22 | Supply and erection of LED Flood Light 120 watt, AC Supply voltage 140-270 volts, 50Hz+-3% (including BIS certified potted single driver with screen or laser printing logo LED driver) with pressure die cast or extruded luminium housing with control gear (IP 66 protection), THD<10%, CRI minimum 70, High power LED (with wattage 1 to 5 watt) with mandatory secondary lenses, toughtned glass fitting, 4 KV SPD within driver and 10 KV external SPD, Min 1K07, efficacy of LED fixture minimum 120 lumens per watt, 5 year warranty including their drivers coomplete in all respects as approved and desired by the Engineer-in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No. AT/2021/GL/1400-1422 dated 6/05/2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab. |
| 23 | Providing and fixing Fabric Matt for Cricket Pitch complete in all respects and satisfaction of Engineer-in-Charge |
| 24 | Total of Civil Works |
| 25 | Public Health Works |
| 26 | CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge |
| 27 | CPVC SDR 11 Pipe & fitting 16mm o/d |
| 28 | SDR 11 CPVC pipes & fittings 20mm o/d |
| 29 | CPVC SDR 11 Pipe & fitting 25mm o/d |
| 30 | Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition |
| 31 | Size 75 mm x 75 mm |
| 32 | Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required. |
| 33 | Through wall 22.86 cm thick |
| 34 | Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. |
| 35 | 15mm i/d G.I. Union |
| 36 | 20mm i/d G.I. Union |
| 37 | 25mm i/d G.I. Union |
| 38 | Painting G.I. Pipes and Specials with synthetic enamel Paint in all shades as per I.S.I. specification on existing or new work, two coats paints including cleaning rubbing surface, etc. |
| 39 | 15mm & 20mm i/d G.I. Pipe |
| 40 | 25mm & 32mm i/d G.I. Pipe |
| 41 | Providing and fixing in position Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity. (without cistern fitting) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. |
| 42 | Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity (without cistern fitting) size 62x37x67 cm with P trap or S trap and seat cover complete in all respect. |
| 43 | Providing and fixing jet spray with 2'-6\\" long PVC pipe. |
| 44 | With PTMT nut |
| 45 | Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 46 | Providing & fixing in position vitreous Chinware white Indian make flat back or angular lipped front small urinals size 265x315x440mm approved make (to the approval of the Engineer-in-charge) with C.P. brass tube connection 300 mm long complete in all respect. |
| 47 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect. |
| 48 | Size 550 mm x 400 mm x 815 mm |
| 49 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 50 | PVC tube connection of size 15 mm x 450 mm with PTMT nut |
| 51 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. |
| 52 | Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. |
| 53 | C.P brass towel ring |
| 54 | Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect. |
| 55 | Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect. |
| 56 | C.P. brass Bib cock long nose/ long body foam flow without flange |
| 57 | C.P. brass Bib cock foam flow without flange |
| 58 | Providing & Fixing in postion CP Brass Spout Operated Pillar Tap with base flange (for foot operated valve) of approved make (to the approval of Engineer-in-charge) complete in all respect. (instead of pillar tap in Lavatory Suites) |
| 59 | Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 60 | C.P.brass 15mm Angle valve without flange |
| 61 | C.P.brass 15mm Concealed stop cock with flange. |
| 62 | Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect. |
| 63 | Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-in-charge )with various fixtures complete in all respect. |
| 64 | C.P. Brass extension piece, 25mm long to 50mm long |
| 65 | Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) |
| 66 | Size 600mmx450mm |
| 67 | Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge ) complete in all respect. C.P. Brass Accessories |
| 68 | C.P. brass toilet roll holder with flap |
| 69 | Providing & Fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge ) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect. |
| 70 | Aluminium khunti with 3 pegs |
| 71 | Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self cleaning design with S.S. grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc. |
| 72 | With 100mm x 75mm i/d Floor Trap (weighing 5.8 Kg) Please Enable Macros to View BoQ information |
