Tender For Restoration Of Rain Damage To Lis Harnoda, Deola, Chammb In Tehsil Sadar District Bilaspur (H.P.) (Sub Head:-Repairs Of Choked Chambers, Hdpe Pipe Lines Of Various Dia & Main Feeder Pipe Line Of Mserw Pipe 200Mm Dia & 150Mm At Harnoda) ., Sub Division Bilaspur Section Panjgain-Himachal Pradesh
TDR : 55907393
Tender Notice
BOQ
6 Days Left
Sub Division Bilaspur Section Panjgain
Himachal Pradesh
Tender For Restoration Of Rain Damage To Lis Harnoda, Deola, Chammb In Tehsil Sadar District Bilaspur (H.P.) (Sub Head:-Repairs Of Choked Chambers, Hdpe Pipe Lines Of Various Dia & Main Feeder Pipe Line Of Mserw Pipe 200Mm Dia & 150Mm At Harnoda) .
Name of Work:- Restoration of Rain damage to LIS Harnoda, Deola, Chammb in tehsil Sadar district Bilaspur (H.P.) (Sub Head:-Repairs of choked Chambers, HDPE pipe lines of various dia & main feeder pipe line of MSERW pipe 200mm dia & 150mm at Harnoda) .
Sl. No.
Item Description
1
Excavation in foundations, trenches etc., in earth work, lift upto 1.50 mts.stacking the excavated soil not more than 3 metres clear from the edge of excavation & returning the stacked soil in 15 cm.layers,when required into plinths sides of foundations etc.conslidating each depositrd layer by ramming & watering & then disposing of all surplus excavated earth as directed within a lead of 20 metres complete in all respect as per entire satisfaction of Engineer in Charge.
2
P/J work:-
3
P/L cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 graded stone aggregate 40 mm nominal size) & curing complete in Foundation & Plinth.
4
Brick work using common burnt clay building bricks(IInd class) in found. andplinth in 1:4 (1cement:4sand) in foundation & plinth
5
15mm Cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chambers (Cement Mortar=1:4)
6
Dismentalling of old HDPE Pipes from trenches (Earth work in trenches to be measured & paid for separately)
7
90 mm dia PN-4
8
110 mm dia PN-4
9
125 mm dia PN-4
10
140 mm dia PN-4
11
160 mm dia PN-4
12
180 mm dia PN-4
13
Re-laying of old dismentalled HDPE pipes in trenches i/c testing complete in all respect (Earth work in trenches to be measured & paid for separately)
14
90 mm dia PN-4
15
110 mm dia PN-4
16
125 mm dia PN-4
17
140 mm dia PN-4
18
160 mm dia PN-4
19
180 mm dia PN-4
20
Laying, jointing & commissioning of HDPE(High Densilty Polyethylene Pipes) of Following diameter and Class confirming to IS 4894-1995 with fusion welding process including all necessary fittings and bends in all leads and lifts to the entire satisfaction of Engineer in Charge
21
110mm dia PN-4
22
140mm dia PN-4
23
180mm dia PN-4
24
Providing Circumferencial Butt Welded joints by electrical arc welding to below mentioned MSERW Pipe as per IS:3183-2007, welded in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS : 816-1969 specifications, by using welding electrodes of 2.50 mm to 6.30 mm of Advani Oerlikon (Adore) - CITOJET / ESAB make, conforming to IS:814-1991, at site of work complete in all respects, including manual / mechanical handling of pipes in all leads and lifts to the entire satisfaction of Engineer-in-Charge.
25
G/Main MSERW pipe 150 mm dia
26
G/Main MSERW pipe 200 mm dia Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
