|
| 1 | Dismantling the existing electrical accessories like all kinds of old wiring, battens, wooden blocks, conduit pipes, main switches, net guards, iron clad DBs, MCB DBs, bus bars, light fittings, fan, fan clamps, power boards, different sizes cable, glands, nails, fastener, damaged panels, incoming & out going cable etc. at working site and deposit the dismantles items at section store with mending good the damages as per direction. |
| 2 | Supplying and fixing of 415 V, 125 A, TPN, SFU with sheet steel enclosure (Make - L&K / Siemens / Havells) on angle iron frame on wall with nuts, bolts, etc., incl. S & F 3 nos. DIN type HRC fuse as per rating. [4(a)/D-3] |
| 3 | S & F of 415 V, 125 A TPN on load front operated Changeover switch (Make - L&K / Havells / Standard / HPL) with sheet steel enclosure on angle iron frame on wall with nuts bolts etc. [3(a)/D-2] |
| 4 | S & F of 6 ways, SS, powder coted, IP-43 protection, double door, 415 V, VTPN MCB DB (Make - Legrand / ABB Itus / Schneider / Siemens) for 160 A FP MCCB incomer, 63 A SP/TP MCB outgoing with related accessories, on angle iron frame on wall including mending well the damages to original finish, inter connections with suitable copper wire, making neutral link and provision for earthing attachment. [15/D-11] |
| 5 | S & F of f 4 ways, SS, powder coted, IP-43 protection, double door, 415 V, HTPN MCB DB (Make - Make - Legrand / ABB Itus / Schneider / Siemens) for 63 A FP MCB incomer, 32 A SP MCB outgoing with related accessories, concealed in wall after cutting the wall including mending well the damages to original finish, inter connections with suitable copper wire, making neutral link and provision for earthing attachment. [14/D-10] |
| 6 | S & F of 2+10 ways, SS, powder coted, IP-43 protection, double door, 240 V, SPN MCB DB (Make - Make - Legrand / ABB Itus / Schneider / Siemens) for 40/63 A DP MCB incomer, 6 to 32 A SP MCB outgoing with related accessories, concealed in wall after cutting the wall including mending well the damages to original finish, inter connections with suitable copper wire, making neutral link and provision for earthing attachment. [13/D-19] |
| 7 | S & F of single door 240 V, 4 way SP MCB SS enclosure (powder coated) with IP-30 protection (Make - Legrand/Siemens/ABB), concealed in the wall after cutting the wall & mending the damages to the original finish incl. painting, connection & provision for earthing attachment. [11/D-9] |
| 8 | Distribution wiring in 1.1 KV grade 3 X 1.5 sq. mm single core stranded 'FR' PVC insulated & unsheathed copper wire (Make - Finolex/ RR Kabel/ Havells) partly in 20 mm size MMS PVC rigid conduit 'FR' (Precision) [for ceiling portion only] and in 19 mm bore, 3 mm thick polythene pipe [for horizontal & vertical run embedded in wall] to light/fan/call bell points with switch (Anchor) fixed on MS CRC sheet metal (16 SWG) switchboard on wall complete with 3 nos. suitable size “Ph, N & E” copper bar incl. 3 mm thick bakelite top cover and 175 mm x 100 mm x 65 mm inspection box, making earthing attachment, painting the MS box, mending the damages to the original finish [only PVC Rigid Conduit on the ceiling and remaining portion concealed] - Average run 8 Mtr. [5(c)/E-15] |
| 9 | Distribution wiring in 1.1 KV grade 3 x 1.5 sq. mm single core stranded 'FR' PVC insulated & unsheathed copper wire (Make - Finolex / Havells / RR Kabel) in 20 mm size MMS PVC rigid conduit 'FR' (Precision make) to light/fan/call bell points with switch (Anchor) fixed on MS CRC sheet metal switchboard (16 SWG) cum JB on wall complete with 3 nos. suitable size “Ph, N & E” copper bars, 3 mm thick bakelite top cover, 175 mm x 100 mm x 65 mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish. Average run - 8 Mtr. [2(d)/E-14] |
| 10 | Distribution wiring in 1.1 KV grade 3 x 1.5 sq. mm single core stranded 'FR' PVC insulated & unsheathed copper wire (Make – Finolex / Havells / RR Kabel) to 6 A flush type plug socket & switch fixed on MS CRC sheet metal switchboard (16 SWG) embedded in wall complete with 3 mm thick bakelite top cover, painting the MS box and mending good the damages to original finish - On Board. (4(a)(i)/E-10) |
| 11 | S & F of MS fan clamp of two-piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat, including mending good the damages to building roof with satisfactory finishing and painting. [29/D-14] |
| 12 | S & F of 240 V, 6 A plug socket with separate 6 A Piano key type switch (Anchor) on sheet metal switchboard embedded in wall incl. S & F 150 mm x 100 mm x 65 mm MS switchboard (16 SWG) and bakelite top cover of 3 mm thick by brass screws after making housing for the switch by cutting bakelite cover and making necessary connections as required. (21/E-6) |
| 13 | S & F of 240 V, 6 A plug socket - 2 nos. with separate 6 A switch (Anchor) - 2 nos. on MS switchboard embedded in wall incl. S & F 175 mm x 100 mm x 65 mm MS switchboard (16 SWG) and bakelite top cover of 3 mm thick by brass screws after making housing for the switch by cutting bakelite cover and making necessary connections as required. [10(b)/E-4] & [14(a),15(a)/E-5] |
| 14 | S & F of 240 V, 20 A plug socket with separate 20 A Piano key type switch (Anchor) on sheet metal switch board embedded in wall incl. S & F 150 mm x 100 mm x 65 mm MS switch board (16S WG) and bakelite top cover of 3 mm thick by brass screws after making housing for switch by cutting bakelite cover and making necessary connections as required. (E-6/22) |
| 15 | S & F of 240 V, 3 nos. 6 A & 1 no 20 A plug sockets with separate 3 nos. 6 A & 1 no. 20 A piano key type switches with indicator & 16 A kit-kat fuse unit (Anchor) on sheet metal switch board embedded in wall incl. S&F of 240 mm X 200 mm X 65 mm MS (16 SWG) switch board and bakelite top cover of 3 mm. thick by brass screw and making necessary connection as required. [E-7/25] |
| 16 | S & F of 240 V, 25 A, Modular type starter (Make - ABB / Legrand / Schneider) with 25 A Modular switch type SP/DP MCB (C-Curve) and 4 Module GI Modular type switchboard with 4 Module top cover plate flushed in wall incl. S&F switchboard and cover plate, making necy. connections with PVC Cu wire and earth continuity wire etc. [17/E-19]. |
| 17 | S & F of 240 V, 20 A Plug Socket (Anchor) on sheet metal switchboard incl. S & F 100 mm x 100 mm x 65 mm MS (16 SWG) switch board and bakelite top cover of 3 mm thick by brass screws after making housing for the socket by cutting the bakelite cover and making necessary connections as required. |
| 18 | S & F of 240 V, 20 A Switch (Anchor) on sheet metal switchboard incl. S & F 100 mm x 100 mm x 65 mm MS (16 SWG) switchboard and bakelite top cover of 3 mm thick by brass screws after making housing for socket by cutting bakelite cover and making necessary connections as required. [17(b/E-6] |
| 19 | Cutting Channel of 40 mm x 40 mm on masonry wall by electrically operated cutting machine incl. S & F 19 mm dia 3 mm thick heavy gauge polythene pipe using anchoring chemical (Hilti/Sika), GI 'U' hooks of 8 SWG, 18 SWG GI wire as fish wire and mending good damages to original finish by using own tools and tackles. [6(a)/E-3 ] |
| 20 | S & F of sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works.100 mm x 100 mm x 65 mm [11(a)/E-4] |
| 21 | 150 mm x 100 mm x 65 mm [11(b)/E-4] |
| 22 | 175 mm x 100 mm x 65 mm [11(c)/E-4] |
| 23 | S & F of PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works. [7/E-16]20 mm size |
| 24 | 25 mm size |
| 25 | Making 25 mm dia holes on 125 mm depth RCC ceiling. [9(a)/E-3] |
| 26 | Supplying and Drawing of 1.1 KV Gr. single core stranded 'FR' PVC insulated & unsheathed stranded copper wire (Make - Finolex/ RR Kabel/ Havells) of the following sizes in the pre-laid polythene pipe as per GS. 3 x 1.5 sq. mm [1(b)/E-9] |
| 27 | 2 x 2.5 sq. mm + 1 x 1.5 sq. mm [1(s)/E-9] |
| 28 | 2 x 4 sq. mm + 1 x 2.5 sq. mm [1(v)/E-9] |
| 29 | 2 x 6 sq. mm + 1 x 4 sq. mm [1 y)/E- 9] |
| 30 | 4 x 16 sq. mm + 2 x 10 sq. mm [1 g)/E- 9] |
| 31 | S & F of bakelite / perspex top cover on existing inspection box by Brass screws- 100 mm x 100 mm x 65 mm [13(a)/E-5] |
| 32 | 150 mm x 100 mm x 65 mm [13(b)/E-5] |
| 33 | 175 mm x 100 mm x 65 mm [13(c)/E-5] |
| 34 | Finishing of the following PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. [9/F-5]2 x 2.5 sq. mm + 1 x 1.5 sq. mm |
| 35 | 2 x 4 sq. mm + 1 x 2.5 sq. mm |
| 36 | 2 x 6 sq. mm + 1 x 4 sq. mm |
| 37 | 4 x 16 sq. mm + 2 x 10 sq. mm |
| 38 | S & F of 1.63 mm (16 SWG) thick GI sheet fabricated, water proof type looping cable box (Size - 200 mm x 150 mm x 100 mm deep) comprising with one 240 V, 16 A kit-kat fuse unit, one NL on porcelain insulator, 4 nos. 32 A stud type connectors, rubber gasketed hinged top cover with mechanical locking arrangement, earthing terminal with lug, anticorrosive paint embedded in wall with mending well the damages. |
| 39 | Supplying and delivering the Armoured Cables with XLPE/PVC insulated, designed for 1.1 kV, Stranded Aluminium Conductor, high tensile galvanised steel wire/strip armour for mechanical protection and PVC/FR PVC outer sheathing power cable (Make - Havells / Universal / RR Kabel) of the following sizes as per IS 7098 Part - 1/2011 with up-to-date amendments ----3 core 6 sq. mm cable |
| 40 | 4 core 16 sq. mm cable |
| 41 | 4 core 70 sq. mm cable |
| 42 | S & F of 40 mm dia medium gauge GI pipe (ISI medium - Zindal/Bansol/Tata) protection with necessary fittings and jointing materials as required. [11(c)/F-6] |
| 43 | Charges for cutting of Pitch Road (200 mm wide and 300 mm depth) for installation of 40 mm dia GI Pipe and mending the damages to the original finish incl. removing the rubbish |
| 44 | Laying of following sizes Ar. Al. cable on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot-Dip) wire, making holes etc. as necy. mending good damages and painting - 3/4 core 6/16 sq. mm cable [2(b)/F-1] |
| 45 | 4 core 70 sq. mm cable [2(d)/F-1] |
| 46 | Laying of 3/4 core 6/16 sq. mm cable after cutting floor/ pavement/wall and making holes incl., embedding the cable at an average 75 mm depth in floor/ pavement/wall and mending good the damages to original finish incl. removing the rubbish. [5(i)/F-3] |
| 47 | Laying of 3/4 core 6/16 sq. mm cable through existing GI Pipe. [3(a)/F-1] |
| 48 | Laying of 4-core 70 sq. mm cable through the existing GI Pipe. [3(b)/F-1] |
| 49 | Laying of the following sizes cable in the UG trench of 460 mm wide x 760 mm average depth with brick protection on the top of the cable [8 (eight) nos. bricks per Mtr.], filling the space between the bricks, cable and trench with shifted soil, levelling up and restoring the surface duly rammed. 3/4 core 6/16 sq. mm cable [1(a)/F-2] |
| 50 | 4 core 70 sq. mm cable [1(b)/F-2] |
| 51 | Supplying and fixing compression type cable gland complate with brass gland, brass ring, rubber ring for dust & moisture proof entry of XLPE/PVÇ Armoured cables as below - 3 core 6 sq. mm cable [7(b)/F-3] |
| 52 | 4 core 16 sq. mm cable [7(c)/F-4] |
| 53 | 4 core 70 sq. mm cable [7(c)/F-4] |
| 54 | Finishing the end of following XLPE/PVC armoured cables by cimping method incl. supplying and fixing solder less socket (Dowels make), tapes, anticorrosive paste & jointing materials. [8(b)/F-5]3 core 6 sq. mm cable |
| 55 | 4 core 16 sq. mm cable |
| 56 | 4 core 70 sq. mm cable |
| 57 | S & F of 415 V, 125 A FP MCCB (Make - Legrand / ABB/ Schneider / Siemens) of breaking capacity 36 kA with adjustable thermal and fixed magnetic setting in VTPN DB including necessary connection. [10/D-8] |
| 58 | S & F of 240/415 V, DP/FP MCB type Isolator (Make - Legrand / ABB / Schneider / Siemens) on din rail of SPN/HTPN/VTPN DBs and necessary connection. [6/D-5]240 V, 32 A DP |
| 59 | 240 V, 40 A DP |
| 60 | 415 V, 63 A FP |
| 61 | S & F of 240/415 V, SP/DP/TP MCB of breaking capacity 10 kA & C characteristics (Make - Legrand / ABB / Schneider) on DIN rail of DBs and necessary connection. [7/D-6]240 V, 6/10/16/20/32 A SP |
| 62 | 415 V, 32 A TP |
| 63 | 415 V, 63 A TP |
| 64 | Excavation of soil for installation of Earth Electrode and filling & ramming for soft soil. [1(a)/G-1] |
| 65 | Earthing with 50 mm dia GI pipe (Tata Medium), 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level. [2(a)/G-1] |
| 66 | S & F of earth bus bar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the bus bar complete with GI bolts, nuts, washers, spacing insulators etc. as required. [4(b)/G-2] |
| 67 | Connecting the equipment body to the earth bus bar including S&F 25 mm x 6 mm galvanized (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipment incl. drilling holes, with bolts, nuts, washers etc. [5(d)/G-3] |
| 68 | Connecting the equipment to earth bus bar including S & F 4 SWG GI (Hot Dip) wire on wall/floor with staples buried inside wall/floor as required and making connection to equipment with bolts, nuts, washers, cable lugs etc. as required and mending good damages. [5(a)(i)/G-2)] |
| 69 | S & F of 240 V, 12-way, double-door, SS enclosure, powder-coated, IP-43 protection, Timer DB with a neutral bar, and DIN rail comprising 1 no. 20/25 A DP MCB ('C' Curve, 10 kA), 1 no. 24-hour digital Time Switch, 1 no. 20/25 A 2-pole contactor (Make - ABB / Schneider / Legrand), DP connector with internal wiring by suitable size copper wire, including 1 no. Auto/manual bypass Toggle Switch, provision for earthing attachment, and LED indication light for on-off conditions. (For Compound Light) |
| 70 | Supply and delivery of 230 V, 50 Hz, single-phase, 1200 mm (48 Inch), 32 watts, 350 rpm and air delivery 210 CM/Min (Minimum) AC ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal (Aluminium alloy) blades, 30 cm long down rod (14 SWG & higher thickness), 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body. Power Factor not less than 0.9, with a remote for speed control and all remaining accessories, including safety pin, nut bolts, washers, temperature rise = 75 °C (max.), insulation resistance more than 2 mega ohms, suitable for compliance with IS 374:2019. and external connections with 3 x 1.5 sq. mm FR, single core, PVC-insulated copper conductor cable as required. Make- Crompton/ Usha/ Orient. |
| 71 | Supply of box type, 4 ft. long, single T-8 LED tube light fittings complete with all accessories [Make - Phillips, Cat No. - TMC 502 P 1 x T-LED 22 W / Wipro, Cat No. WIO912208]. [NS] |
| 72 | Supply of 4 ft. long 18/20 Watt, polycarbonate LED T-8 lamp (Make - Philips Master LED tube model no. 18W 865 T8 I 2100 lm / Wipro, Cat No. LL13-181-65SESL]. [NS] |
| 73 | SITC of Street light following Wattege LED of fixture powder coated pressure die cast aluminium body finish with corrosion-resistant fasteners (SS hardware) & silicon gasket for proper sealing with the driver as per the requirement, with the driver efficiency >80%, Input Voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range 0 ° to 50 ° C and working RH 10% - 90%, internal surge protection of 5 KV internal and external SPD min. 10 KV, L, N, E as per IEC 61000-4-5. The driver rated output wattage should be 10% to 15% higher than the lamp rating, and at least 2 drivers for 200W & above and Driver efficiency >85%, THD < 10% as per IEC 61000-3-2, P. F.≥0.9, IP- 66, IK-08 specified below, CRI >70, under voltage and overvoltage protection, a high-efficiency lens with type II/III distribution as required with UV stabilized optical lens, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours (Life projection shall be calculated as per TM-21 methodology) and 70% of initial Lumen maintained till life ends. CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K, Maximum power consumption should not be more than the specified rating, and the fixture shall be of the relevant BIS standard, complete in all respects, and LED Chips of SMD mid to high-power (2.5 to 4 watts for 200 watts and above, as per required (LM- 80 tested) and necessary inter-connections with 1.5 sq mm FR, PVC insulated copper conductor single core cable and earthing etc. as required with minimum 5 years OEM comprehensive on-site warranty against manufacturing defects including driver and LED module. All test reports, except L80, should be from a 3rd-party NABL-accredited lab, as per BIS, and shall be submitted. Shape size and CCT shall be as approved by the Engineer-in-Charge as per the requirements. System lumen efficacy ≥135 lm/Watt. (Make - Philips / K-Light / Wipro / Havells) 70/72 watt |
| 74 | 90 watt |
| 75 | Supply & delivery of 230 V, 50 Hz, single phase, 40 watts, 9\\" (230 mm) sweep, speed 1350 rpm (minimum), A.C. Exhaust Fan and class of insulation: B, 4 nos. metal (Aluminium alloy) blades, copper winding, steel/Al body. Power Factor not less than 0.9, and a minimum air delivery of 650 cmh (minimum), including a capacitor with a safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohms, suitable for compliance with IS 374:2019 and external connections with 3 x 1.5 sq. mm FR, single core, PVC-insulated copper conductor cable as required. |
| 76 | Supply & delivery of 230 V, 50 Hz, single phase, 80 watts, 12\\" (300 mm) Sweep, speed 1400 rpm (minimum), A.C. Exhaust Fan and class of insulation: B, 4 nos. metal (Aluminium alloy) blades, copper winding, steel/Al body. Power Factor not less than 0.9, and a minimum air delivery of 1710 cmh (minimum), including a capacitor with a safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohms, suitable for compliance with IS 374:2019 and external connections with 3 x 1.5 sq. mm FR, single core, PVC-insulated copper conductor cable as required. |
| 77 | S & F of 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board.[20(a)/D-13]. |
| 78 | Fixing only the exhaust fan after making a hole in the wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of the following diameter: [28(b)/C-4]30cm (12\\") |
| 79 | 23cm (9\\") |
| 80 | S & F aluminium louvre shutter on the wall with necy. bolts & nuts (6 mm dia x 62 mm long) for following exhaust fan. [32(a)/D-14]30 cm (12\\") |
| 81 | 23cm (9\\") |
| 82 | Fixing only the ceiling fan complete with blades, canopy, fork, rubber bush etc., incl. S&F 3x1.5 sq. mm PVC insulated copper wire up to 30 cm, and making necessary connections as required by. [21(a)/C-3] |
| 83 | Fixing only outdoor LED compd. light fitting complete with all accessories to be fixed/projected from the wall of the building by S&F 40 mm dia, 1.5 Mtr. long GI pipe (ISI-Medium) having suitable bend, GI reducer on one end as required after making providing clamping arrangement with S&F necy. length of 3x1.5 sq. mm PVC insulated single core stranded copper wire and making connections as required, mending good damages to wall and painting etc. [18/C-3] |
| 84 | Fixing only single/twin LED light fitting complete with all accessories directly on wall/ceiling by “Z” type (50 + 25 + 25) mm x 25 mm x 3 mm thick MS clamp whose one side would be fixed on wall/ceiling by 4 nos. fastener & other side with the fitting by 2 nos. nut-bolt and making connection by 3 x 1.5 sq. mm PVC insulated stranded copper wire through the polythene pipe, with mending good damages to original finish incl. S&F the fixing materials. |
| 85 | Fixing only single/twin LED light fitting suspended 25 cm bellow the ceiling with 2 nos. 20 mm dia EI conduit (16 SWG) supports fixed with “L” type (65 +75) mm (length) x 25 mm (width) x 3 mm (thick) MS clamp whose one side would be fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size 4 nos nut-bolt and making connection by 3 x 1.5 sq. mm PVC insulated stranded copper wire through the polythene pipe, mending good damages to original finish incl. S&F the fixing materials, panting etc. as required. |
| 86 | S & F additional 2 nos. 20 mm dia EI conduit (16 SWG) supports, PVC insulated stranded copper wire (3 x 1.5 sq. mm through the polythene pipe) & panting etc as required for extra suspension of fitting exceeding 25 cm. |
| 87 | S & F of Light weight, linear batten, 2 Ft Long, with high efficacy, extruded aluminium housing and high transitivity polycarbonate diffuser, high efficacy and uniform lighting (Make- Philips / Crompton / Wipro) on wall with MS Clamp (as per direction of EIC) and suitable size MS fastener, etc. as required. . |
| 88 | S & F of socket and step type fan regulator (Anchor) on existing SM switchboard with bakelite top cover by screws after making housing for regulator knob by cutting bakelite top cover including making necessary connections etc. [18(a)/E-6] |
| 89 | S & F of 240 V, 12 Watt, BC type LED lamp (Make - Philips / Wipro / Crompton / Havells) |
| 90 | S & F of LED bulkhead light fitting (Make - Philips, Type - WT202W LED10S CW PSU S3 PC / Wipro, Cat. No. LW07-141-XXX-57-G1 / Crompton, Cat. No. CIS-306-10-57-SL-DP-NBK) on wall. Please Enable Macros to View BoQ information |
