Tender For Supply Installation Testing and Commissioning of 6 Passenger Lift Including Allied El Work At Community Hall Of Akankha Housing Complex Under South Kolkata Electrical Section -I, Hd.- Supply Installation Testing and Commissioning of Passen
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Aug 2026
12 days left
EMD
34000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Newtown → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply Installation Testing and Commissioning of 6 Passenger Lift Including Allied El Work At Community Hall Of Akankha Housing Complex Under South Kolkata Electrical Section -I, Hd.- Supply Installation Testing and Commissioning of Passenger Lift.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 02-Jul-2026 | Date Corrigendum | Date | 13-Jul-2026 |
| 2 | 13-Jul-2026 | Date Corrigendum2 | Date | 24-Jul-2026 |
| 3 | 24-Jul-2026 | Date Corrigendum 3 | Date | 10-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | SITC of Automatic Lift (as per manufacturer design & as per detailed specification below conforming to IS) and putting into operation after final testing in the existing lift shaft complete with all accessories including dismental of existing lift: |
| 2 | Make :Category A |
| 3 | Type :- MRL Lift (Machine Room Less) |
| 4 | Load: (Minimum) 06 -Passenger/ 408 Kg. |
| 5 | Control: Microprocessor based with AC variable voltage & variable frequency (VVVF) |
| 6 | Machine:- Energy efficient machine, Gearless with Machine Room |
| 7 | Postion of Machine Room : MRL |
| 8 | Speed:- 01 Mtrs./Sec |
| 9 | Floor Served :- 3 |
| 10 | Landing :- 3 All on same side |
| 11 | Travel : 6.6 Mtr. |
| 12 | Operation : Microprocessor based implex full collective with or without attendant. |
| 13 | Signals: Digital car position indicator , car travels direction indicator in car & at all landing with call registration indicator with braille |
| 14 | Leveling accuracy + 5mm(Micro levelling arrangement) |
| 15 | Car inside :.950...mm(W) x …1150..mm(D) x …2200(H) |
| 16 | Car Entrance : Clear Opening ..800. Mm (W) x 2000..mm(H) protected with car door for Accessible IndiaDoor Dimension:- 700mm(W)x2000mm(H) |
| 17 | Car Enclosure : Stainless Steel Sheet(20 SWG) with Hairline finish with hand rail |
| 18 | Car Ceiling & Lighting : Stainless Steel with hairline finish with LED lighting and Fan/ Integrated roof HS80 Stainless Steel Hue spot LED light |
| 19 | Car Ventilation: Pressure fan with anodised aluminium grill. |
| 20 | Car Flooring : Decorative granite flooring (As per direction of EIC and according to this Department's Order). |
| 21 | Car Door: Stainless Steel Centre/ Side opening automatic door provided with V3F controlled door drive system.Door Type- Two-panel centre opening Vision Panel |
| 22 | Landing Door : Stainless steel centre opening automatic door provided with V3F controld door drive system.Door Type- Two-panel centre opening Vision Panel |
| 23 | Door Opening : Automatic power operated door with full length Photocell assembly light curtain sensor. |
| 24 | MAP Floor Position:- Topmost floor (TOP) |
| 25 | Car design :- SS silver mirror |
| 26 | Car Panel Finish :- Side walls: Stainless steel Hairline Rear wall: Silver mirror polished stainless steelFront wall: Stainless Steel |
| 27 | Handrail:- Round Bend Handrail Silver brushed stainless steel at Rear Wall |
| 28 | Flooring:- 20 mm Customer provide Granite Stone (by customer) Car skirting material: Stainless steel Hairline |
| 29 | Car Door Finish:- Stainless steel Hairline |
| 30 | Car operating panel:- Full Height Stainless Steel Face Plate Silver brushed StSt Segmented LCD display Square surface mounted Buttons with braille |
| 31 | Landing Signalization:- Stainless Steel 7 segment display Surface Mounted Silver brushed StSt Square,surface mounted with braille |
| 32 | PROTECTIVE DEVICES & OTHER ACESSORIES |
| 33 | ARD: Automatic rescue device complete with dry maintenance free batteries as required for automatic evacuation to the nearest floor in case of Power failure/Single phasing/others. |
| 34 | Overload Protection : Full loaded with overload protection. On overloading the lift care will not start with door remaining open and give audio display indication |
| 35 | Emergency lighting in car: Battery operated emergency lighting in the lift car. |
| 36 | Intercom system: Battery Operated intercom system in lift car, Machine Room & Control Room |
| 37 | Emergency Alarm: Battery operated alarm bell system in lift car and control room. |
| 38 | Fireman switch: Fireman switch at main landing terminal |
| 39 | Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator. |
| 40 | Main rope - As per manufacturer's standard conforming to IS. |
| 41 | Features:- |
| 42 | Correction drive to next level; Emergency Alarm @ Main Floor; Car Call backwardsOverload function, constant indication/Buzzer; Bypass load FunctionAuto Cut off Fan and Light; Manual Rescue OperationCentralized Hoisting for lesser vibration and smooth travel; Pit Ladder; Micro movement Led Based Buttons; L.W.D. (Load Weighing Device); Direction & Position Indicator In Car & Landing; Advanced Car Position Indication; Automatic Brake Test function every 11hoursEvery run brake supervision; Phase reversal functioning; Signal Fixtures; +10% to –10% Voltage Fluctuation Withstanding Capacity; Door Open Button; Car Emergency LightFireman Drive; Curtain of Light 169 Beams; Accurate Relevelling, Automatic, Closed DoorCar door lock |
| 43 | Additional Fetures:- |
| 44 | Emergency Rescue Device with audio announcer; E-link provision only; Three way intercomNudging service; Lift Announcer; BMS; Hue spot LED light; Access Control ProvisionCCTV provision only |
| 45 | DIMENSION OF SHAFT & POWER SUPPLY |
| 46 | Shaft Dimension 1630mm x 1500 mm |
| 47 | Pit Depth :1600 mm |
| 48 | Overhead : 4200 mm |
| 49 | Electric power supply : AC 415 Volt 3 Phase, 50 Hz, terminated in machine room as per IS. |
| 50 | Add. G.S.T.@ 18% (on Total from item no 1 to 1.49) to be calculated by bidder |
| 51 | Add. LWC.@ 1% to be calculated (on total from item no 1 to 1.49 + GST@18%) by bidder Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 13, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 24, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 10, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 12 daysAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysAug 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender