|
| 1 | PART A Common Effluent Treatment Plant |
| 2 | 165 KLD CETP (STP FLOW 150 KLD & 15 KLD ETP FLOW) |
| 3 | SUB HEAD: CETP (COMMON EFFLUENT TREATMENT PLANT) |
| 4 | Supply, Fabrication, installation, testing and commisioning of Fully automatic sewage treatment plant based on MBR Process with sewage handling capacity of 150 KLD per day and 15 KLD Effluent Flow with Common Line. The entire plant will be constructed in MSEP / JINK ALUMINIUM Febricated. The CETP shall be designed as per Raw water Perameter, with necessary chemical dosing as required by the manufacturer's design. All the equipment, piping, pumps, air blowers and electrical panel etc. (Defect Liability Period will be 05 Years, All Parts and Machinery maintenance, Replacement included in 05 Year DLP), It's An Engineering, Procurement, and Construction (EPC) (Make :- Willmer / Eco Vibe Solutions Pvt Ltd.) |
| 5 | Domestic Influent from domestic Ward and Hospital toilets, kitchens etc. from the Commercial complex and shall be discharged into the CETP. Design to take consideration of same. |
| 6 | Daily average flow : 165 M3/Day |
| 7 | PH : 6.5 - 8.5 |
| 8 | BOD5 : 250-300 mg/l |
| 9 | S. Solids : 200 - 450 mg/l |
| 10 | COD : 450-650 mg/l |
| 11 | Oil & Grease : 25-50 mg/L |
| 12 | Effluent discharge standard after treatment as per RPCB :- |
| 13 | PH : 7.0 - 8.5 |
| 14 | BOD5 : Less than 05 mg/l |
| 15 | TSS : Less than 10 mg/l |
| 16 | COD : Less than 50 mg/l |
| 17 | Oil & Grease : Less than 10 mg/l |
| 18 | Electro Machanical |
| 19 | 165 KLD Sewage Treatment Plant Based MBR Technologies |
| 20 | Bar Screen :- Providing & fixing of 2 nos. SS-304 wire Bar Screen of size 500mm x 600mm having provision for lifting arrangement etc. complete as required. 2 Nos |
| 21 | EQUALIZED WASTE WATER TRANSFER PUMPS / RAW SEWAGE PUMP : 2 (1W + 1S) Nos. |
| 22 | Providing & fixing fully submersible sewage handling type pump for raw sewage transfer from equalization tank to aeration tank. The pump shall have complete CI construction, TEFC induction motor including pressure gauge, lifting arrangement for the pump. Solid handling shall be 25-40 mm. Make- Kirloskar/ Wilo/ Cromton Greves/ Assurity/Toshio/CNP/Eqv. |
| 23 | Capacity : 8.25 M3/hr @ Discharge Head 10-15 M head (1 Working + 1 Standby), |
| 24 | Air Blower :- Diffusion system shall include the following: 2 (1W + 1S) Nos. |
| 25 | Tri Lobe type rotary air blowers 2 Nos. (1 W + 1 S) Capable of delivering 165 cum/hr (each) of free air at 0.45 kg/cm2 driven through “V” belt or directly coupled through flexible coupling to a TEFC motor of suitable HP Suitable for 415 ± 10% volts, 3 phase, 50 cycles a/c supply for aeration of EQT, SHT and TWT. Make: Everest/Beta/Akash/Airvac/Eqvt. |
| 26 | Air piping :- shall comprise of pipes droppers/ laterals with MS C Class Header complete with all fittings such as tees, crosses, plugs, sockets, elbows, reducers, supports & clamps, puddle flanges etc cutting chases & making good in Plant Room. Make: Tata/Jindal/Supreme/Astral/Prince/Surya Prakash/Eqv. :- 1 Lot |
| 27 | Diffusers :- Fine /coarse aeration bubble diffusers as required. :- 1 Lot |
| 28 | Air dispersion system shall be provided for Equalisation Tank, Sludge holding Tank and Ariation Tanks. (UPVC/CPVC) :- 1 Lot |
| 29 | MBR Membrane with skid MOC - PVDF/SS-304 :- 1 Lot |
| 30 | Make- Deerfos/ Flosys/ Memtrix Technologies/ Willmer/ Eqv. |
| 31 | TUBE MEDIA :- Supply, installation, testing Tube Settler reactor Media Packeg a) TUBE MEDIA - 1 Lot |
| 32 | Make- MM Aqua/ PP Aqua/ Pharmtech/ Vasu Enviro/ Bharat Industries/Eqv. |
| 33 | SLUDGE TRANSFER PUMP / SLUDGE RECIRCULATION PUMP : 2 (1W + 1S) Nos. |
| 34 | Providing and fixing horizontal, centrifugal sludge transfer pump with 7-10mm solid handling. The pumps shall have CI casing, CI Impeller & CS shaft & sleeve with mechanical seal. MSEP common base frame. |
| 35 | Make- Kirloskar/ Wilo/ Cromton Greves/ Assurity/Toshio/CNP/Eqv. |
| 36 | Capacity 7.5 m3/hr @ 8-10 m head |
| 37 | MEMBRANE SUCTION PUMP : 2 (1W + 1S) Nos. |
| 38 | Providing and fixing Horizontal centrifugal pumps for filtration. The pumps shall be made of CI casing, CI Impellar, CS shaft & sleeve, Mechanical Seal are connected to a TEFC induction motor. Motor to be suitable for 250/440 V, 3 Phase, 50 cycles AC power supply. |
| 39 | Make- Kirloskar/ Wilo/ Cromton Greves/ Assurity/Toshio/CNP/Eqv. |
| 40 | Capacity 8.25 M3/Hr.@ 20-25M head |
| 41 | CIP Dosing Tank:- Supplying, installing, testing & commissioning of 1000 Litres capacity HDPE tank with inlet / outlet connection & piping. 1 No. |
| 42 | Make- SYNTAX / eqvt. |
| 43 | CIP DOSING PUMP:- |
| 44 | Capacity 7.5 m3/hr @ 25-30 M Head. |
| 45 | Make- Kirloskar/ Wilo/ Cromton Greves/ Assurity/Toshio/CNP/Eqv. |
| 46 | CEB Dosing TANK :- Supplying, installing, testing & commissioning of 1000 Litres capacity HDPE tank with inlet / outlet connection & piping. :- 2 Nos. |
| 47 | Make- SYNTAX / eqvt. |
| 48 | CEB DOSING PUMP:- 2 Nos. |
| 49 | Capacity 0 TO 100 LPH |
| 50 | Make- Edose/ Aster/ Eqvt. |
| 51 | All Type Valves :- 1 Lot |
| 52 | Make- Astral/Supreme/Marck/Kartar/Eqv. |
| 53 | MS 'C' class : pumps & Blower interconnecting piping. :- 1 Lot |
| 54 | Make- Tata/Jindal/Surya Prakash/Eqvt. |
| 55 | Screw Press/Filter press:- Supply, erection & commissioning screw press / filter press with sludge feed as suitable :- 1 Nos |
| 56 | Make: Pharmtech / Vasu Enviro / Willmer / SkyLab/Eqv. |
| 57 | Pressure Gauge 0 to 7 KG (SS-304) :- 10 Nos |
| 58 | Make:- Hguru / Forbes Marshel / Eqvt. |
| 59 | Lavel Switch / Float Switch :- 6 Nos |
| 60 | Make:- Jigo / Sibaas / Inflo / Flo / Eqvt. |
| 61 | Membrene Back Wash Pump :- 2 (1W+ 1S) Nos |
| 62 | Capacity 16.5 m3/hr @ 20 M Head. |
| 63 | Make- Kirloskar/ Wilo/ Cromton Greves/ Assurity/Toshio/CNP/Eqv. |
| 64 | Electro magnetic type flow meter :- Providing & fixing on line Electro magnetic type flow meter cum Totaliser for Monitoring the total flow, Flow rate. etc. Including electrical wiring from panel to flow meter. Complete with all type of Plumbing & Electrical connections, accessories, wiring, conduits & supports complete with all respect. :- 1 Nos |
| 65 | Make- Unitech/ UPC/ Eqv. |
| 66 | Flash Mixture With Tank :- 1 No |
| 67 | Make- Kirloskar/ Wilo/ Cromton Greves/ Assurity/Toshio/CNP/Eqv. |
| 68 | Belt Type Oil Skimmer :- 1 Nos |
| 69 | Make- Cutedge/ Eqvt. |
| 70 | Prefabricated MSEP UNIT/TANKS :- 1 SET (Willmer Eco Technologies/Eco Vibe Solutions Pvt Ltd) |
| 71 | Anoxic Tank-1 |
| 72 | Preclarifier Tank-1 |
| 73 | Areation Tank-1 |
| 74 | Tube Settler Tank-1 |
| 75 | MBR Tank-1 |
| 76 | MCC PANEL for STP :- 1 Nos |
| 77 | Required MCC PANEL capacity of MCCB for DOL/ Star Delta starter and outgoing feeders for all pumps, motors and operating equipment. Each compartment shall contain Auto/ Manual switch, contactor, relay, single phase preventer, sequential controller for auto operation of working and standby equipment complete in all respects for the following, but not limited to: |
| 78 | Panel shall be designed on the actual HP as per model selection of pumps |
| 79 | starters shall be provided with Automatic level controller As Required |
| 80 | Notes: |
| 81 | All MCCBs / MCBs shall be of 18 / 10 KA breaking capacity and suitable for motor duty application. |
| 82 | All motor starters shall be provided with Automatic level controller |
| 83 | DOL starters shall be used for motors below 10 HP and Star-Delta Starters for other motors . |
| 84 | Provision for dry run protection shall be made in the panel. |
| 85 | MCC for STP as described above |
| 86 | All Control system to Make the STP fully automatic. The operation of the pumps shall be controlled by the level controller. |
| 87 | Supplying & Fixing of Cables , Conector, Cable Trays, to make Electrical Installation Complete. Necessary cable alleys, internal / cabling, wiring, cabling from MCC to various pumps / equipment and interlocking. |
| 88 | Total PART A : Supply, Installation, testing & commissioning of 165 KLD CETP Compact type MBR technology based Common Effluent treatment plant as per above specification |
| 89 | PART B Online Effluent Quality Monitoring System |
| 90 | * Online Effluent Quality Monitoring System (COD, BOD, TSS, pH ) |
| 91 | PART C OPERATION & MAINTENANCE FOR 05 YEAR CETP ( STP and ETP) |
| 92 | The SITC of CETP includes 05 Years of Defect liability peroid). All Parts and Machinery maintenance, Replacement included in 05 Year DLP. The Operation and maintanance of above CETP will be for 05 Years which includes 24x7 operation of CETP each by skilled operator, regular backwashing/cleaning, all Consumables and any other activity required for un-hindered operation of CETP. The Payment of O&M cost will be done on quarter basis (after every 3 months) after getting report of outlet parameters matching with prevailing RPCB/CPCB norms. |
| 93 | Five Year O & M ( O & M with All Labour/Operator's and All Consumable Chemicals and Part’s Replacement. ) CETP |
| 94 | OPERATION & MAINTENANCE COST FOR 1st YEAR |
| 95 | OPERATION & MAINTENANCE COST FOR 2nd YEAR |
| 96 | OPERATION & MAINTENANCE COST FOR 3rd YEAR |
| 97 | OPERATION & MAINTENANCE COST FOR 4th YEAR |
| 98 | OPERATION & MAINTENANCE COST FOR 5th YEAR Please Enable Macros to View BoQ information |
