|
| 1 | Dismantling and clearing away existing for damaged IWC Set including cost of conveyance and labour charges at site, other incidental charges etc., complete |
| 2 | Dismantling and clearing away existing for Doors and Windows including removal of frames, hinges and fastenings conveyance at site of labour charges etc. complete as per PWD SOR 2024-25, page no.28 Unique Code W-0029 |
| 3 | Chipping of concrete and roughening the surface and Clearing away from the site etc complete as per specification Complete as per PWD SOR 2024-25, page no.28 Unique Code W-0036 |
| 4 | Brick work in following Cement Mortar using best quality Burnt Clay Brick of size 9” x 4 1/2” x 3” with class designation of 7.5 conforming to IS 1077-1992 for oundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge. |
| 5 | Plastering with cement mortar 1:5mix 12mm thick including cost and conveyance of labour charges and other incidental charges etc., complete as per std. Specification. |
| 6 | Dadooing walls with following best approved quality, white / colour glazed tiles conforming to IS 15622 of following sizes in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 7 | Flooring with ceramic tiles of following size and variety conforming to IS 15622 laid over cement mortar bed of 20 mm thick in cement mortar 1:3 (One Cement and Three crushed stone Sand) with required Cement Slurry and Mortar Plasticizer including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 8 | Supply and fixing in position of white glazed of 20” size Indian type water closet with ‘p’ or ‘S’ trap and a pair porcelain foot rest to slaps set in bricks jelly cc 1:4:8 100mm thick using 20mm thick jelly and finishing to sludge out any leakage and default including cost and conveyance of all materials labour charges for fixing in position and other incidental charges etc., complete as directed by dept. officers. |
| 9 | Supplying & fixing door shutters for Solid Core Flush Shutters with Teak ply on both side with teak wood lipping alround 35mm thick, single leaf confirming to IS:12406/1989 with 35x12mm T.W. Lipping on all edges with necessary adhesives and CP screws complying with standard specifications. The rate is inclusive of threee coats of best quality varnish but excluding cost of furniture fittings, such as 300 mm tower bolt 2nos, 200mm towerbolt 1 No. 300mm Aldrop 1 No. Alu handle ornamental type 2 Nos and 1No. Door stopper etc complete. |
| 10 | Supply and fixing of M.S Grills with Ventilator arrangements with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. |
| 11 | Painting two coats of old plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of Paris, putty, wherever required etc., complete complying with standard specification. |
| 12 | Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion with suitable colour for PVC concealed light / fan point (6Points Per Coil) (For Rooms like Bath, Toilet & Pump room etc..) (SD-26). |
| 13 | Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3 mm thick Hylem sheet cover for 5 A 3 pin non inter locking CS Plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point. [SD38] |
| 14 | Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condenser with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting.(S.D.88). |
| 15 | Supply and fixing OF 4' 40 Watts LED Tube Batternetc., completee |
| 16 | Supplying, delivery and laying of the following size of PVC / UPVC pipes and specials for Purpose of Drainage and Water Pipline arrangements including cost and conveyance of materials to site and labour charges etc, complete as instructed by Departmental Officers |
| 17 | 32mm upvc pipe |
| 18 | 32mm upvc elbow |
| 19 | 32mm upvc Tee |
| 20 | 32mm Ball valve |
| 21 | Reducer 32mm x 25mm |
| 22 | 25mm upvc pipe |
| 23 | 25mm upvc elbow |
| 24 | 25mm upvc Tee |
| 25 | 25mm upvc Coupler |
| 26 | 25mm Ball valve |
| 27 | Reducer 25mm x 20mm |
| 28 | 20mm Brass Tap |
| 29 | PVC Adhesive Solution |
| 30 | Plain Cement Concrete 1:2:4 (one cement, two fine aggregates & four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per std specification |
| 31 | Supply, delivery and fixing of 1000Lit Capacity of HDPE Tank as per IS 12701/1996 including loading, unloading, transporatation and labour charges for fixing of the GI Pipes and specials for pipe connection works including cutting and threading charges and inclusive of materials cost, labour conveyance hoisting and fixing charges etc., complete as directed by Departmental Officers Please Enable Macros to View BoQ information |
