|
| 1 | Cleaning and Levelling site using the Backhoe Loader mechane including all labour cost etc., complete |
| 2 | Providing Pile Foundation of size 300mm dia using augur including labour charges and all other tools and plants charges etc., as per direction of departmental officers |
| 3 | Earth work excavation and depositing on bank with initial lead of 10 meters and initial lift of 2 meters in hard stiff clay, stiff block cotton hard red earth, murrams, gravel stoney earth and earth mixed with small size boulders and hard gravel soil etc., complete as per standard specification. |
| 4 | Plain Cement concrete 1:4:8 [one cement, four M-sand and eight course aggregates] using 40mm size Hard Broken / Machine crushed Granite Stone Jelly including dewatering if found necessary and laid in layer so not more than 15cm thick and compacted etc., complete complying with standard specification. |
| 5 | Supplying and erecting centering for soffits of RCC slabs, plane surface like lintels, beams etc., including strutting 3m high using mild steel sheets of size 90cm x 60cm and BG 10 stiffened with M.S angles of size 25mm x 25mm x 3mm laid over silver Oak (C.W) joists of size 10cm x 6.5cm (spaced at about 90cm c/c) and supported by casurina props of 10cm to 13cm dia (spaced of 75cm c/c) etc., complete complying with standard specification. |
| 6 | Supplying, fabricating and placing in position of Steel Reinforcement using Mild Steel or Ribbed Tor steel bars for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors etc., complete complying with standard specification. |
| 7 | Reinforced cement concrete 1: 1.5 :3 [one cement, one and half M-sand and three course aggregates] using 20mm size Hard Broken / Machine crushed Granite Stone Jelly for all RCC items of works excluding centering, shuttering and cost of reinforcement, including curing, fixing fan clamp and fixtures if necessary etc., complete complying with standard specification. |
| 8 | Fly Ash Brick work In CM 1:5 mix (one cement and five M-sand) using best Fly Ash Bricks of size 230 x 110 x 70mm including finishing, curing etc., complete complying with standard specification. |
| 9 | Plastering with cement mortar 1:5 mix, 12mm thick in all floors using clean screened sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc., complete complying with standard specification. |
| 10 | Paving the floor with pre-polished Concrete Anti-Skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One part of Cement and Three part of PlasteringSand (P- Sand)), 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg/sq.m., curing, etc., complete complying with standard specification and as directed by th |
| 11 | Dadooing walls with Glazed tiles of sizes 305mm X 200mm X 6mm sizeof approved make and quality and colour Set in cement mortar 1:2 (Onepart of Cement and two part of Plastering Sand (P- Sand)) over 10 mmbase layer plastering and pointing with white cement neatly as directed. |
| 12 | Supplying and fixing in position White / Colour Glazed Model FloorMounted European Water Closet of best quality and approved make with100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipeof 110mm dia, double flapped rigid PVC black seat and seat cover withCP brass hinges including cost of white cement, cement for packing,spun yarn, teak wood plugs, brass screws, etc., including supplying andfixing 10 liters capacity PVC / 12.5 liters capacity porcelain low levelflushing tank with a pair of CI brackets, etc., complete with all fittings,such as, 15mm brass ball valve with polythene float with brass handle,union coupling connected by means of 40mm white PVC flush hand usingIndian adopter joint including all internal fittings, such as, 15mm brasconnections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mmnylon connection, TW plugs, screws and also giving necessaryconnection to the PVC pipe and painting the CI brackets with 2 coats ofapproved paint over one coat of red oxide primer, dismantling themasonry and re-doing the dismantled masonry to original condition, etc.,complete complying with standard specifications. (The EWC and flushingtank with all accessories should be got approved by the ExecutiveEngineer before use on works) Floor Fitting |
| 13 | Supply and Fixing in position of Indian make White glazed earthware WASH BASIN 550mmx400mm with all accessories such as costIron brackets , 32mm dia C.P waste coupling 15mm dia G.M wheel valve ,15mm dia Nylon connection , 15mm dia Brass Nipples, 15mm C.P Pillar tap etc., complete. |
| 14 | Supply and fixing of mild steel door using all round \\"L\\" angle 25 X 25 X 6mm thick, cross bracing 20 X 6mm M.S.Flat with necessary locking arrangements including cost and conveyance etc., |
| 15 | Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification |
| 16 | Painting two coats for New iron work surface using best quality synthetic enamel paint etc complete complying with standard specification. |
| 17 | Earth work excavation and depositing on bank with initial lead of 10 meters and initial lift of 2 meters in hard stiff clay, stiff block cotton hard red earth, murrains, gravel stoney earth and earth mixed with small size boulders and hard gravel soil etc., complete as per standard specification. |
| 18 | Plain Cement concrete 1:4:8 [one cement, four M-sand and eight course aggregates] using 40mm size Hard Broken/Machine crushed Granite Stone Jelly including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted etc., complete complying with standard specification. |
| 19 | Supplying and erecting centering to sides and soffits including supports and strutting for plinth beams sides s using 90cm x 60cm and B.G 10stifened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding laid over (silver oak joists ) of size 10cm x 6.50cm spread at about 90cm etc. complete complying with standard specification . |
| 20 | Plain Cement concrete in 1:3:6 [one cement, three M-sand and six course aggregate] using 20mm size Hard Broken / Machine crushed Granite Stone Jelly including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted etc., complete complying with standard specification. |
| 21 | Supplying and filling well gravel in layers of not more than 15cm thick well rammed, watered and compacted etc., complete complying with standard specification. |
| 22 | Supplying and filling in foundation and basement with filling M-sand in layers of not more than 15cm thick well rammed, watered and compacted etc., complete complying with standard specification. |
| 23 | Providing and laying of 60mm thick Interlocking Paver Block (TAMIN) in uniform shape of approved make to be laid in flurring bond pattern with 150mm thick quarry rubbish cushion below the uniform shape of approved non-skitting surface in the top and the rates including levelling the base, preparation of pavers as sub base and quarry rubbish cushion etc., complete complying with standard specification. |
| 24 | Supplying and fixing of Chain Link 2 \\" x 2\\" Using 10 Gauge Galvanised Wire ( of all Sizes ) 10mm Gauge GI Chain link fencing with best quality including cost of chain link and labourcharge for fixing etc., compelte complying with standard specifications and as directed by thedept officers |
| 25 | See Saw 4 Seater - Fiber reinforced plastic of width 7ft 0\\" and supporting frame made of 40mm GI Pipes and Swinging Arm made of 50mm GI Pipes of length 8ft 0\\". Handle made of 19mm GI pipes Seats are fibre reinforced plastic and including epoxy painting etc., complete. |
| 26 | Slide - 5ft Height wave slide made of FRP moulded materials and ladder 1 inch G.I pipe and ½ inch cross steps supporting of 1 ¼” inch G.I pipe. |
| 27 | Swing 2 Seater -Fiber Glass reinforced plastic of Height of 7ft 0” above the ground level and width of 10ft 0” Legs made of 40mm Stainless steel pipes and cross bars made of 50mm SS pipes Seats fiber reinforced plastic seats suspended with 6mm thick in coated chain and including epoxy painting etc., |
| 28 | Jungle Gym - Main frame made of G.I B Class pipe 25mm dia and cross bars made of GI B Class pipe 12mm dia, Overall height 4ft 6” and Diameter of 7ft 0” and including epoxy painting etc., complete. |
| 29 | Earth work excavation and depositing on bank with initial lead of 10 meters and initial lift of 2 meters in hard stiff clay, stiff block cotton hard red earth, murrains, gravel stoney earth and earth mixed with small size boulders and hard gravel soil etc., complete as per standard specification. |
| 30 | Plain Cement concrete 1:4:8 [one cement, four M-sand and eight course aggregates] using 40mm size Hard Broken / Machine crushed Granite Stone Jelly including dewatering if found necessary and laid in layer so not more than 15cm thick and compacted etc., complete complying with standard specification. |
| 31 | Fly Ash Brick work In CM 1:5 mix (one cement and five M-sand) using best Fly Ash Bricks of size 230 x 110 x 70mm including finishing, curing etc., complete complying with standard specification. |
| 32 | Plastering with cement mortar 1:5 mix, 12mm thick in all floors using clean screened sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc., complete omplying with standard specification. |
| 33 | Supplying, fabricating and placing in position of Steel Reinforcement using Mild steel or Ribbed tor steel rods, for all RCC works as per the design given by the departmental officers including cost of steel and binding wire and all labour charges for cutting, bending, tying and placing in position etc, complete as per SS. |
| 34 | Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of 75mm thickness in (one cement, two M-sand and four course aggregates) using 20mm size Hard Broken / Machine crushed Granite Stone Jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification. |
| 35 | Paving the floor with best quality Jet Black Granite Slabs (Super fine polished with Machine cut edges) of size 4'x2' and above 18mm to 20mm thick in cement mortar 1:3 mix and pointing with white cement and colouring pigments to the colour of slabs including the cost of nosing, grooving etc., complete complying with standard specification. |
| 36 | Painting two coats with approved first quality Cement Paint over one priming coat of cement paint over cement plastered wall surface and ceiling including cleaning, preparing the surface and curing etc., complete as per standard specification. |
| 37 | Supply and Run of 4 of 10 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade on 7/20 GI wire forservice connection mains |
| 38 | Wiring with 2 x 1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor cable of 1100V grade insuitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with MS switch Box and 5A FT switch withpainting of suitable colour continuous earth wire connection of 1.5 sq.mm copper wire for light point / fan point (for electronic regulator) |
| 39 | Supply and fixing of 65 mm dia. (2 -1/2\\") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mmMS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitableSMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet andsupply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (classB) Complete with suitable MS clamps for LED street light fitting and SMC box with PVC unsheathed FRLScopper leads from SMC box to fitting and with painting of suitable colour |
| 40 | Supply and fixing of 4 Feet LED 18W Fitting with LED 18W tube (Lower End) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting |
| 41 | Earthing as per PWD standard with an earth electrode of 2 metre Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work |
| 42 | Supplying and fixing of 1200mm(48\\")sweep AC ceiling fan complete with stepped electronic 300W Regulator with 1 metre down rod with fan clamp with side plates and crpss arm of size 450mm(16\\") (SD 106) |
| 43 | Provision For Entrance Elevation With Nural Design including Materials and labours as directed by the departmental officers |
| 44 | Supplying and Delivery of Drinking RO Water 20 Ltr / Hr |
| 45 | Supply and fixing in position of Solid Waste BIN with all cost and conveyance of material and labour charges etc,complete |
| 46 | Solid PVC door shutter using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for paneling shall rigidly fix in position including necessary furniture and fittings. The cover all size of top rail, Lock rail and bottom rail shall be 70mm x 45mm, with suitable rebate for housing the shutter |
| 47 | Supply and Delivery and Fixing of HDPE Tank 2000 Litre capacity as per IS 12701 / 1996 (Lotus Gold) Excluding Loading , unloading , Transportation and Labour Charges for fixing of the GI pipes and specials for pipe connection works including cutting , threading and fixing charges etc., as directed by departmental officers. |
| 48 | Construction of percolation pit using hand boreset to a hole of 300mm dia upto 4.35mm depth and filling with 40mm blue metal granite up to depth of 4.50m and fixing 8\\" x 6\\" C.I. grating covering with R.C.C. precast slab 1:1.5:3 with steel of 6kg per C.C. slab of size 450mm x 450mm x 50mm thick to proper level and alignment including, pointing the outer surface of B.G. metal above G.L. 15cm height with cm 1:3 to full depth curing etc complete. Please Enable Macros to View BoQ information |
