|
| 1 | Dismantling plain cement concrete and labour charges etc,complete |
| 2 | Manufacturing supplying and fixing of MILD STEEL Window made out of40 x 40 x 6 mm M.S angle for outer frame, 35 X 35 X 5mm M.S.Angle forouter frame of shutter. The entire shutter area shall be covered with CRCsheets ( 18 G ) with 5Nos,of stiffners using M.S.Flats of size 25 X 6mm atequal intervals horizontally. The corners of the frames and shutter withCRC sheets shall be welded by adopting flash butt welding or any othersuitable method. Provision towards 3Nos, of Hinges incase of singleshutters / 6Nos,of Hinges incase of Double shutters of 125 X 31 X1.25mm size placed at appropriate intervals and provisions shall be madefor Tower bolts 2Nos, Aldrop 1No. The frame shall be provided with6Nos,of Hold fast of 200mm length using 50 X 6mm M.S.Flat. The entireframe and shutter shall be provided with one coat of red oxide primerincluding cost of hold fasts,hinges, locking arrangements, handles windappliences etc., complete and as directed by the departemental officers. |
| 3 | Conveying the excavated earth,desilting materials dismantling concrete from the site to the distance of 15kms out side of the city limit including all initial lead, lift, loading and unloading with transportation charges etc complete as per the direction of departmental officers. |
| 4 | Plastering with cement mortar1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 10mm thick in all floors including cost andconveyance of all materilas to site and labour charges etc,complete asper standard specifications |
| 5 | SupplingandfabricatingandplacinginpositionMS(or)R.T.S.barforreinforcement to all RCC works as per the design given including cost ofsteel and binding wire also in all floors. |
| 6 | Reinforced Cement concrete 1:1.5 :3 (one cement, one and half M.sand& three course aggregate) using 20mm gauge hand broken/ and brokengranite stone for all RCC items of works excluding centering shutteringand cost of reinforcement but including curing etc.,complete and alsoincluding fixing fan clamps and fixtures in rcc works wherevernecessary as directed by departmental officer etc., complete. |
| 7 | Supply and fixing of M.S Grills with Doorsand Windows with one coat of Redoxide with Primer including all costs such aswelding,grinding and fabrication charges,cost and conveyance of all materials to siteetc,complete as per standard specification |
| 8 | Supply and fixing of Puffed (PUF) roof top, or Polyurethane Foam sandwich roof panel, is a modern, high-performance roofing system constructed by placing a core of rigid polyurethane foam between two outer layers, typically galvanized steel or aluminumPuffed Roof Top conveyance of all materials to site etc,complete as per standard specification.100mm(+38mm) thick PUF roof pane |
| 9 | Supplying, fabricating, erecting structural steel work for roofingweldedor bolted type using MS channels, angles, plates and round bars etc.conforming to IS specification includingprimer coating and enamal painting as perDesign given by the departmental officersetc, complete as per standard specification |
| 10 | Providing UPVC (Un-Plasticized Polyvinyl Chloride)Door: Providing and fixing casement doors fabricatedfrom unplasticized polyvinyl chloride (uPVC) sections.Profiles: The profiles should be three chamber systemwhich provides high insulation properties with outerframe 60mm x 55mm with an outer wall thickness of2.4mm. The window unit should be designed with allcorner joints mitred and fusion welded. Windowsshould be steel reinforced with 25 x 24 x 25mm steelreinforcement with a thickness of 1mm to havedimensional stability. The sash should be of 60 x102mm. The mullion should be of 60 x 74mm. Theprofiles should have co-extruded seals. Hardware: Allthe hardware like friction stays, handles should bescrewed with self tapping screws. The handles, locksshould be designed so that they cannot be releasedfrom outside. Glazing: The window system should beglazed with 5mm plain float glass / 6mm bison lamInstallation: The profiles should be cut to length andwelded 45 degrees. The window should be designedsuch that the water drainage does not pass throughthe reinforcement chamber. The window systemshould be fixed directly to the plastered brick wallusing self expanding nylon plug and driving mselectroplated screws into plug. |
| 11 | Supplying and fixing UPVC (Un-Plasticized PolyvinylChloride) Louvered Ventilators of from the profile thesize of outer frame 60mm x 58mm and shutter profilesize of 60 x 78mm both profiles are reinforced withGI/1mm 125GSM and 100% corrosion free, the profileare multi chambered sections with wall thick of 2mm.The EPDM rubber (black colour) covered with all overthe edges of frame and shutter. The corners andjoints should be welded and cleaned. Radiations pinheaded glass 4mm thick should be provided in thelouvers. The window should be fixed to the wall with100% packing with screws and silicon packing allround the frames. The ventilator should be gotapproved from the Executive Engineer before use onwork |
| 12 | Manufacturing,SupplyingandFixingofStainless Steel Hand railsfor staircase using 50mm dia 304LGrade Stainless Steel pipe of 1.60mm thick at requiredlocations to a height of 900mm from finished floorlevel welded to 38mm dia Stainless Steel pipe post of1.00mm thick as vertical at 900mm centre with 2 Nos.of 25mm dia intermediate horizontal stainless steelpipe of 1.60mm thick in between. The vertical pipehas to be welded to the 100 X 100 X 6mm MS baseplate encased in the base concrete. The rate isinclusive of the charges for cutting, bending, welding,grinding, polishing, conveyance, electrical charges,etc. complete |
| 13 | Supply and run of 4 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade on 7/20 GI bearer wire for service connection mains |
| 14 | Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour. |
| 15 | Wiring with 2x1.5 sqmm(22/0.3) PVC insulated SC unsheathed Copper conductor cable of 1100V grade in suitable PVC rigid Pipe concealed in wall and celling with PVC accessories with TW Switch box in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T switch with continuous earth wire Connection of 14SWG TC wire for making good of the concealed portion with suitable colour for pvc concealed light point/fan point.SD 1 |
| 16 | Wiring with 2x4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.conductor of 1100V grade in suitable PVC rigid Pipe concealed in wall and celling with PVC accessories, In flush with wall, with 150mmx100mmx113mm TW switch box wall 3mm thick Hylem sheet cover for 5A 3 pin non inter locking CS Plug with continuous earth wire connection of.14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point.SD 12 |
| 17 | Wiring with 2x4 sqmm(56/0.3) PVC insulated SC unsheathed Cu.conductor of 1100V grade in suitable Pipe concealed in wall and celling with PVC accessories with 150mmx100mmx63mm TW switch box for 15 A 3 pin non inter locking CS plug with painting of suitable colour, with continuous earth wire connection of 14 SWG TC wire for concealed PVC power plug point.SD 13 |
| 18 | Supply and fixing of Single box type 4’40W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting.SD-89 |
| 19 | Supply and fixing of 1200 mm (48”) sweep AC ceiling fan complete with stepped electronic regulator with 300 mm down rod on the existing clamp.SD 110 Please Enable Macros to View BoQ information |
