|
| 1 | Civil Works |
| 2 | Chipping the existing old damaged cement plastering in ceiling and wall, plinth beam, cleaning the surface without any loose materials, removing the debris away from the site, including cost of all materials, labour, lead, lift etc., complete. |
| 3 | Plastering the ceiling, plinth beam with CM 1:3 - 12mm thick by using special bonding agent and with water proofing compound, after cleaning the rust in the exposed reinforcement and applying with anti rust coat, including cost of all materials, scaffolding, curing, labour, lead,lift etc., complete. |
| 4 | Plastering the wall with CM 1:5 - 12mm thick by using special bonding agent and with water proofing compound including cost of all materials, scaffolding, curing, labour, lead,lift etc., complete. |
| 5 | Supply and fixing the window glasses after removing the damaged window glasses from the leaves, repairing and Refixing existing damaged Window including the cost of materials, labour, lead, lift etc., complete. |
| 6 | Painting the Ceiling, interior and exterior walls with two coats of best quality emulsion of approved colour over a primer coat on application of wall putty, including cleaning preparing the surfaces all materials, etc., complete. |
| 7 | Painting with two coats of enamel paint of approved quality over one coat of red oxide primer including cost of all materials, labour, lead, lift, etc., complete. |
| 8 | Terrace flooring with pressed tiles of size 20x20x2cm using in CM1:3 mixed with crude oil 10 % weight of cement including cost of all materials,labour lead,lift etc complete (Excluding Pointing) |
| 9 | Pointing with CM 1:3 to full depth of tiles including cost of all materials,labour lead,lift etc complete |
| 10 | Old Terrace Screed Repair with UV Resistant Waterproof coating below 500 Sq.m Providing and Applying high perfomance solar reflective & Acrylate silicon based Waterproofing coating which is single component, cold applied, water based acrylic and UV resistant water proofing treatment to the Existing Roof screed surface applied @ 1.5 l/m2 in 3 coats to achieve 1mm DFT, having tensile strength 2N/ mm2 confirming to ASTM D 412; Elongation at break ≥ 200%, Abrasion resistance 21mg confirming to ASTM D 4060 and Crack bridging ability up to 2 mm, including surface preparation, priming the surface with 1 coat diluted with water in the ratio 2:1 spreading @ 0.125 L/m2 as self-priming coat in the SSD condition and spreading 45 gsm glass fibre mesh of 2.5 mm x 2.5 mm sandwiched between the first and second coat completely as per specification. The finished cost to include surface preparation, making coving at Junction, treatment of cracks completely as per specification. |
| 11 | Supplying ,laying and fixing in position of PVC Superthick 25mm dia pipe of best quality from approved manufacturer confirming to IS 4985-1968, 4984-1970 including cutting threading joining with necessary PVC specials and PVC tap including cost of all materials lead lift labour etc complete. as directed by department Engineer at site |
| 12 | Supplying, fixing and laying of 110 mm dia PVC pipe 6 Kg/cm2 of ISI brand for sanitary arrangements including cost of all materials labour lead,lift etc complete. |
| 13 | Supplying and fixing of LED light along with fittings, wiring , including cost of all material, labour, lead, lift, etc, complete. |
| 14 | Supply and fixing of steel door size 1.20 x 2.35 using 40x40x6mm MS angle for outer frame and 30x30x5 mmms angle for leaf frame and ms flat 25x6 mm-3 nos for cross bracings and covered with 18 gauge ms sheet with door locking arrangements including cost of all materials for removing old damaged wooden door ,labour,lead,lift,etc,complete. 1 SQM--40KG |
| 15 | Painting and writing the name of office on the outside wall by the artist as directed by the Engineer in charge including cost of prirmer and two coats enamel paint, labour, lead, lift, T&Ps, etc., complete. Please Enable Macros to View BoQ information |
