Tender For Developemnt Works In The Electric Crematorium Premises Of Mohanpur Municipal Council During The Year 2026-27/Sh:- Ghat, Waiting Shed, Bath Area, Toilet Block, Office Cum Rest Room, Boundary Wall With Gate And Allied Works, Mohanpur-Tripura

TDR : 55905437

Tender Notice
BOQ

4 Days Left

Mohanpur , Tripura

Tender Brief : Tender For Developemnt Works In The Electric Crematorium Premises Of Mohanpur Municipal Council During The Year 2026-27/Sh:- Ghat, Waiting Shed, Bath Area, Toilet Block, Office Cum Rest Room, Boundary Wall With Gate And Allied Works

Document Fees
₹ 4000 /-

EMD
₹ 276077.0 /-

Tender Value
₹ 1.38 Crore /-

Submission Date
15-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
2	All kinds of soil
3	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
4	Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.
5	Providing and laying in position cement concrete of specified grade excluding the cost of centring and shutteringAll work upto plinth level:
6	1:4:8 ( 1 Cement: 4 fine sand : 8 graded stone aggregate 40 mm nominal size)
7	1:5:10 ( 1 Cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size)
8	Providing and laying damp-proof course with cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 12.5mm/20mm nominal size).
9	D.P.C. 40 mm thick
10	Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement- All work upto plinth level:
11	1:1.5:3 (1 Cement: 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size)
12	Reinforced cement concrete work in walls ( any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, poats and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement.
13	1:1.5:3 (1 Cement: 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size)
14	Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement
15	1:1.5:3 (1 Cement: 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size)
16	Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
17	Thermo-Mechanically Treated bars of grade Fe-500D or more
18	Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
19	Thermo-Mechanically Treated bars of grade Fe-500D or more
20	Centering shuttering including struttings, propping etc. and removal of form work for:
21	Foundations, footings bases for columns etc. for mass concrete with timber plank
22	Suspended floors, roofs, landings, balconies and access platform with timber planks
23	Lintels, beams, plinth beams, girders, bresummers and cantilevers with shuttering ply
24	Columns, Pillars, Piers, Abutments, Posts and struts with shuttering ply
25	First class brick work in foundation and plinth including cost of all materials as required complete -
26	In cement mortar 1:4 ( 1 cement : 4 fine sand ).
27	Half brick masonry work with first class bricks in superstructure upto five floor level including cost of all materials as required complete:-
28	In cement mortar 1:4 (1 cement : 4 fine sand ).
29	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position :
30	Local Teak Wood
31	Providing and fixing panelled / or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked bright finished / black enamelled M.S butt hinges with necessary screws excluding panelling and or glazing, which will be paid for separately but including the wooden beading of 20 × 12 mm for fixing panelling and or glazing as per direction of Engineer-In-Charge.
32	Gamair Wood 35 mm thick shutters
33	Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete.
34	Fixed to openings /wooden frames with rawl plugs screws etc.
35	Providing 40 × 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30 × 10 × 15 cm 1:3:6 mix (1 cement : 3 fine sand : 6 graded stone aggregate 20mm nominal size)
36	Providing and fixing ISI : 1341 marked M.S heavy weight butt hinges with necessary screws etc.complete
37	125 × 90× 4.0
38	Providing and fixing IS : 3564 marked Aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. complete.
39	Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
40	300x16 mm
41	250x16 mm
42	Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :
43	300x10 mm
44	250x10 mm
45	Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
46	125 mm
47	100 mm
48	Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.
49	Single rubber stopper
50	Providing and fixing factory made door frame (single rebate) made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 60mm width & 30mm thickness and shall be fixed to wall as per instructions of Engineer-In-Charge using 100x8 sheet metal CSK screws.
51	Providing structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required.
52	Providing and fixing fan clamp type-I of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs during laying including painting the exposed portion of loop, all as per standard design complete.
53	Providing and fixing hand rail using structural steel etc. of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete as required:-
54	G.I.pipes.
55	Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm at 100 mm centre to centre and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia. steel pulleys & with riveted bolts, nuts, locking arrangement, stoppers, handles, hold fast /anchor bolt including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required.
56	Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. complete.
57	40mm thick.
58	Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. complete.
59	40mm thick.
60	Providing and laying cement plaster skirting upto 300mm height with cement mortar 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement including rounding of junctions etc. all complete as per direction of Engineer-in-charge.
61	18 mm thick
62	Providing and laying 1st class quality ceramic floor tiles in different sizes (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 - 2017 of approved make in colours such as White, Ivory, Grey,Fume Red Brown, laid over 20mm thick cement mortar1:4 (1 cement : 4 fine sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. all complete as per direction of the Engineer in- charge.
63	450 mm X 300 mm in all shades and design
64	Providing and laying 1st class quality vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 - 2017, of approved make, in all colours and shades, laid over 20mm thick cement mortar 1:4 (1 cement : 4 fine sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. all complete as per direction of the Engineer-in-charge.
65	Glazed Vitrified Tiles (Glossy/Mat Finish/Anti Skid)Size of Tile 600 mm x 600 mm
66	Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required etc. complete as per direction of Engineer-in-charge.
67	0.63mm thick with zinc coating not less than 275gm/m2
68	Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia. G.I. limpet and bitumen washers complete.
69	0.63mm thick with zinc coating not less than 275gm/m2
70	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4 kg / cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:
71	Single socketed pipe - 110 mm OD
72	Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:
73	Coupler110mm
74	single equal tee without door110x110x110mm
75	single equal tee with door110x110x110mm
76	Bend 87.5degree110mm
77	plain shoe 110mm
78	Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screwsof required length including cutting brick work and fixing with cement mortar 1 : 4 (1cement : 4 fine sand) making good the wall etc. complete.
79	110mm
80	Providing and fixing to the inlet mouth of rain water pipe PTMT grating with thickness of 8mm and weighing not less than 100gm. complete.
81	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4 kg / cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:
82	Single socketed pipe - 110 mm OD
83	Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:
84	Coupler110mm
85	single equal tee without door110x110x110mm
86	single equal tee with door110x110x110mm
87	Bend 87.5degree110mm
88	plain shoe 110mm
89	Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screwsof required length including cutting brick work and fixing with cement mortar 1 : 4 (1cement : 4 fine sand) making good the wall etc. complete.
90	110mm
91	Providing and fixing to the inlet mouth of rain water pipe PTMT grating with thickness of 8mm and weighing not less than 100gm. etc. complete as per direction of Engineer-in-charge.
92	100 mm
93	Providing and fixing Precast chequered cement concrete tiles 18 mm thick, laid in footpath & courtyard, on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry including rubbing and cleaning etc. all complete as per direction of Engineer-in-charge.
94	In dark shade using ordinary cement
95	12mm cement plaster of mix
96	Cement mortar 1:4 (1 cement : 4 fine sand)
97	15 mm cement plaster on the rough side of single or half brick wall of mix: )
98	Cement mortar 1:6 (1 cement : 6 fine sand)
99	Distempering with 1st quality acrylic distemper ( ready mixed) having VOC cement less than 50 grams/ litre , of approved brand and manufacture to give an even shade [Payment sall be made after submission of Test Certificate issued by the manufacturer]
100	New work ( two or more coats) over and including water thinnable priming coat with cement primer.
101	Finishing walls with textured exterior paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the manufacturer] :
102	New work ( two or more coats applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
103	Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :
104	White Vitreous china Orrisa pattern W.C. pan of size 580x440 mm with integral type foot rests.
105	Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid,10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :
106	W.C. pan with ISI marked white solid plastic seat and lid
107	Providing and fixing stainles steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I brackets and stainless steel plug 40mm including painting of fittings and brackets , cutting and making good the walls wherever required:
108	510x1040 mm bowl depth 225 mm.
109	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and340x410x265mm sizes respectively.
110	Providing and fixing white vitreous china squatting plate urinalwith integral rim longitudinal flush pipe.
111	Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings:
112	Flat back wash basin of size 550x400mm.
113	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
114	Semi rigid pipe32mm dia
115	flexible pipe32mm dia
116	Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
117	Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
118	Providing and fixing toilet paper holder :
119	C.P. brass
120	Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/ cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. :
121	For 100 mm dia. Pipe
122	Providing and fixing heel rest sanitary bend
123	100 mm dia. Sand cast iron S&S as per IS: 1729
124	Providing and fixing double equal plain junction of required degree.
125	100 x100x100x100mm dia. Sand cast iron S&S as per IS: 31729.
126	Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick,bolts and nuts complete.
127	100x100x100 mm Sand cast iron S&S as per IS: 1729
128	Providing and fixing terminal guard:
129	100 mm Sand cast iron S&S as per IS: 1729
130	Providing and fixing collar:
131	100 mm Sand cast iron S&S as per IS: 1729
132	Providing lead caulked joints to sand cast iron/centrifugally cast(spun) iron pipes and fittings of diameter:
133	100mm
134	Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors:
135	100 mm inlet and 100 mm outletSand cast iron S&S as per IS: 3989
136	Providing and fixing G.I. pipes of medium class as per IS:1239 with latest amendment complete with G.I. fittings and clamps,including cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer-in-charge.Inernal work - Exposed on wall.
137	25 mm dia. nominal bore
138	40 mm dia. nominal bore
139	Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete as per CPWD specification and direction of the Engineer-in-charge.
140	25 to 40 mm nominal bore
141	Providing and fixing brass bib cock of approved quality :
142	15 mm nominal bore
143	Providing and fixing brass bib cock of approved quality :
144	15 mm nominal bore
145	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):
146	25 mm nominal bore
147	40 mm nominal bore
148	Providing and fixing gun metal non-return valve of approved quality (screwed end):
149	40 mm nominal bore verticle
150	Constructing masonry Chamber 30x30x50 cm, inside in brick work in cement mortar 1:4 (1 cement :4 fine sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :
151	With Second class bricks
152	Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work :
153	25 mm nominal bore
154	40 mm nominal bore
155	Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :
156	40 mm diameter pipe
157	Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required :
158	40 mm nominal bore.
159	Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
160	Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40gms.
161	Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms.
162	Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 1st class bricks in cement mortar 1:4 (1 cement : 4 fine sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 fine sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 fine sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :
163	Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets :
164	Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with well burnt 2nd class bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Tripura Tenders

Construction Tenders

Civil Construction Tenders

Cremetorium Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Developemnt Works In The Electric Crematorium Premises Of Mohanpur Municipal Council During The Year 2026-27/Sh:- Ghat, Waiting Shed, Bath Area, Toilet Block, Office Cum Rest Room, Boundary Wall With Gate And Allied Works, Mohanpur-Tripura

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Developemnt Works In The Electric Crematorium Premises Of Mohanpur Municipal Council During The Year 2026-27/Sh:- Ghat, Waiting Shed, Bath Area, Toilet Block, Office Cum Rest Room, Boundary Wall With Gate And Allied Works, Mohanpur-Tripura

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us