Name of Work:- ITEM SUPPLY FOR CHAINLINK FENCE, RCC POLES AND BARBED WIRE
Sl. No.
Item Description
1
GALVANIZED STEEL CHAINLINK FENCEMesh Wire–Galvanised steel wire of 3.15 mm diameterFabricSize –100x100mmHeight – 150cmLineWire–2 numbers of line wires of 4.00 mm diameterStandard-Conforming to IS-2721-2003, with Up to date amendments
2
RCC FENCING POLES HIGHT 2.0 MType–StraightLenght–2.00mDimensions–Bottom 10x10 cm square,Top 8x8 cmsquareCement Concretc Mix–Cement, sand and metal ratio1:2:4, with 12.5 nominal size coarse aggreate. Sand used should be free from clay and salt, concrete mix shall be conforming to grade M-15 of IS:456:2000Reinforcement–4 round vertical bars of 6 mm diameter. 11 No of stirrups of 6 mm diameter round MS bare 20 cm centre to center.Hooks-5 no. bottom hook should be provided 60 cm above the bottom of the pole. Second at 82.5 cm, third hook at 112.5 cm, fourth hook at 150 cm , top and fifth hook at195 cm from bottom.Manufacturing-In order to ensure desiredCompressive strength, RCC fencing poles sould becompacted with the help of platform vibrators. Surface should be uniform and free from voids. The concrete cover over the reinforcement should not be less than1.5cm
3
Galvanised Steel Barbed Wire Line Wire – Galvanised Steel wire of 2.5 mm diameterPoint Wire – Galvanised steel wire of 2.5 mm diameterBarbs – Destance between two boards 75 mm, the barbs shall have four points and shall be formed by twisting two point wires each two turns tightly around both the line wires making altogether four complete turns. Standard – Conforming to IS-278-2009 Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
