|
| 1 | Taking down chowkat or frames with shutter (without taking off shutters from the frame) not exc 1.5 sqm complete all as specified and as directed. |
| 2 | Taking down chowkat or frames with shutter (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 Sqm |
| 3 | Taking down shutters of any description exc 1.00 Sqm but n. exc 2.00 Sqm complete all as specified and as directed. |
| 4 | S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikers framed guard bars barred iron doors ladders; framed balusters walk ways railings framework of watertanks and similar work conforming to Fe-290 Gde-165. |
| 5 | M&L for powder coated aluminium sliding window shutter sections weighing not less than 0.37 including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, stainless steel screws, anodised aluminium fittings such as locking arrangements, rollers etc complete all as specified and directed.Note - Each shutter area will be measured seperately |
| 6 | S&F aluminium anodised frame for doors, windows vetilators with one of more rebates incl joining cleat for fixing etc, with powder coating complete all as specified and directed. |
| 7 | S&F powder coated, min thickness (50 micron) aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 8 | Supplying and fixing of 6mm ACP sheet fixing (Cross bond, uro bond or equivalent) in shutter panesl including all necessary accessories and other necessary hardwares. |
| 9 | S&F sheet glass 4.8mm thick ordinary quality, in squares n exc 0.5 sq. m each pane complete all as specified and directed. |
| 10 | All as per Ser item No 9 above, but 4.8mm thick sheet glass exc 0.5 sq. m each pane complete all as specified and directed. |
| 11 | S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 12 | S&F in repairs galvanised mild steel wire cloth, 0.56 mm nominal ida of wire and average width of aperature 1.18 mm and fixed with tinned tacks, or galvanised wire staples to existing steel/wooden windows, doors etc all as specified and as directed . |
| 13 | S&F in sheet glass ordinary quality 4mm thick in square not exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading incl Hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frame including punching or drilling out old glazing pins/spring clips all as specified. |
| 14 | S&F 3 mm thick figured glass pin headed type and glazing with oil putty in square n.exc 0.50 Sqm in each pane incl Hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frame including punching or drilling out old glazing pins/spring clips all as specified. |
| 15 | S&F solid PVC door frame at size 50 mm x47mm made out of 5 mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixed in opening as per specification and drawings. |
| 16 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side colour PVC shet to be fitted in the M.S frame selded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement fixed to frame, all as per specification & drawing. |
| 17 | S&F stainless steel 75/100 mm butt hinges for doors complete all as specified. |
| 18 | S&F 100 mm long aluminium anodised barrel tower bolts and extruded section complete all as specified and as directed. |
| 19 | S&F 125 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed. |
| 20 | S&F 40mm thick flush shutters, solid core construction, with block board core both faces covered with decorative face veneer with lipping/frame to match all as specified and as directed |
| 21 | S&F 30 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass , gauge etc divided in to squares with plain, chamfered or rounded mittered and rebated sash bars any numbers, edges of framing plain chamfered complete all as specified and as directed. |
| 22 | S&F stainlees steel 150mm door handles with stainless steel screws all as specified and as directed. |
| 23 | S&F stainlees steel 150mm tower bolt with stainless steel screws all as specified and as directed. |
| 24 | S&F stainlees steel 250mm sliding door bolt with stainless steel screws all as specified and as directed. |
| 25 | S&F mild steel 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete (Helical door spring) including welding to steel chowkhats if required all as specified. |
| 26 | S&F in repairs alumiium cast type Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg |
| 27 | S&F in repairs alumiium cast type Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg |
| 28 | S&F floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 140mm complete all as specified |
| 29 | S&F in repairs stainless steel medium weight curtain rods 25 mm dia including approved support bracket and a pair of polished end knobs for each rod fixed with stainless steel screwsall as specified . |
| 30 | S&F Stainless steel polished wall brackets for holding curtain rod medium weight all as specified. |
| 31 | S&F in repairs Stainless steel polished end knobs spherical in shape suitable for 25mm rod all as specified. |
| 32 | M&L preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified. |
| 33 | M&L preparation of new or previously untreated steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enemel paint over a coat of red oxide. |
| 34 | M&L for fabrication cabinets, cupboards etc of openable shutters, shelves partitions, drawers etc made up of 19mm solid core BWR ply choice lamination on the both faces, stainless steel fancy handles, tower bolt and other fittings as directed, taking down old cabinets, S&F wood frame etc complete all as specified and as directed.Note - 1. Surface area of each member is measured flat for payment. 2. S&F of all necessary hardware shall be measured seperately. |
| 35 | S&F BLOO BASKET Stainless steel Modular Kitchen Basket Accessories cabinets Multi- porpose Utensils drawer basket wired (set of 6, Size : 16 inch w X 20 inch D X 8 inch H) complete all as specified and directed. |
| 36 | S&F concealed type clip-on soft close hinges made of CRCA steel with nickel plated finish, having minimum 105 degree opening, suitable of 15-22 mm thick shutters with inbuilt hydraulic soft closing mechanism and 3 way adjustment, fixed with screws complete all as specified and as directed. |
| 37 | S&F stainless steel 304 grade satin/matt finish caninet handles/ drawer knob of approved desgin and size fixed with screws complete all as specified and as directed. |
| 38 | M&L for economy grade hollow PVC wall/ceiling panels of 6-8mm thick with approved print/ lamination, having tongue and groove joints, fixed with and including GI framework using self taping screws or hanging with GI wires as required including dismantling existing panelling/walling and all necessary accessories all as specified and as directed. |
| 39 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing servicieable tiles to store and rubbish off the premises. |
| 40 | Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground floor) |
| 41 | M&L 25 mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded crushed stone aggregate), as in sub base of floors. |
| 42 | S&F light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed in cement mortar 1:6 all as specified and as directed |
| 43 | S&F light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in wall etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10 mm thick plaster in cement mortar 1:4 all as specified and as directed |
| 44 | S&F coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6. |
| 45 | S&F coloured Glazed ceramic tile in verticle surface 300x450x7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering in CP 1:4 |
| 46 | Supply and laying of 20 mm dia CPVC pipe SDR 11 & plain CPVC SDE 11 fitting on wall/ceiling or laying in tfloors Iincluding taking down old tubes 20mm dia, complete all as splecified. |
| 47 | All as per Ser item No 46 above, but 25mm dia including taking down 25mm dia pipe all as specified and as directed. |
| 48 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth. |
| 49 | S&F in CPVC brass treaded elbow 20 mm fixed with all as specified. |
| 50 | S & F in repair vitreous china washdown water closet pan & trap (pedestal pattern) with plastic water closet seat black closet pattern with flat bottom and cover and mild steel chromium plated or aluminium hinginng device with flush pipe to pedestal pan incl all joints incl connection to drain pipe and flush pipe. |
| 51 | S&F in repairs EWC with integral flushing cistern of vitrous china (one piece) white or coloured including fixing bolts and flush pipe, seat cover, hinging device, 'P' or 'S' trap WC connector etc, complete all as specified and directed . |
| 52 | S&F viterous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests Squatting pan orrisa pattern including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor including trap set in and including concrete. |
| 53 | S&F in repair PVC low level flushing cistern 10 ltr capacity, valveless, syphonic action type with inlet, ball valve float and handle incl brakcet, PVC connection, flush pipe 32 mm dia complete all as specified. |
| 54 | S&F in repair Health faucet (brass CP Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 55 | S & F in repair vitreous china white wash hand basin flat back size 550x400 mm incl brackets chain & plug, PVC connection, waste pipe, waste coupling 32mm dia etc. |
| 56 | S & F in repair 600x450 mm bevelled edge mirror of selected quality glass fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and as directed. |
| 57 | S&F in repair Mirror cabinet of size 300mmx450mm mirror of selected quality fixed in wall screws complete all as specified and directed.(Make: Prayag/Commander or its equivalent of other makes) |
| 58 | S&F in repairs 2 way tap 15 mm nominal bore, brass, fancy type, chromium plated, screwed down, high pressure with Capston head, screwed ends for iron/CPVC pipes or for unions complete all as specified and directed. |
| 59 | S&F in repairs angle valves male/female threaded 15 mm nominal bore, brass, fancy type, chromium plated, screwed down, high pressure with Capston head, screwed ends for iron/CPVC pipes or for unions complete all as specified and directed. |
| 60 | S&F in repair 15 mm bore Fancy type Bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. |
| 61 | S&F in repair 15 mm bore pillar taps, cast copper alloy, fancy type with capstan heads, chromium plated screwed down high pressure with or without lattered 'Hot' or 'Cold' with long screwed for iron pipe and fixed. |
| 62 | S&F in repair Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified |
| 63 | S&F in repair brass chromium plated tubular towel rail 20 mm dia, D type 60 cm long between flanges |
| 64 | M&L for towel ring 200-250mm dia made of heavy duty stainless steel pipe or chromium plated all as specified and as directed. |
| 65 | S&F 304 grade stainless steel folding towel rack 24 inch, curved design, wall mounted type, chrome finish including 4 nos hook, 01 towel rod supported with wall flats, tubular pipes fixed with chromium plated concealed screws complete all as specified. |
| 66 | S&F in repairs chromium plated grating 100/75 mm dia circular with centre hole/ without hole of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified. |
| 67 | S&F 500 Ltr rotational moulded poly-ethylene water tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I including dismantling of tanks all as specified. |
| 68 | All as per Ser No 67 above, but 1000 ltr capacity |
| 69 | S&F 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed, (Min wt 210 gms) |
| 70 | S&F CPVC tank adaptor 20mm dia. |
| 71 | S&F in repairs Glass corner shelf including CP railing, radius 250 mm complete all as specified and directed. |
| 72 | M&L in repairs 15mm dia CP swan neck long body fancy type sink tap complete all as specified. |
| 73 | S&F in repairs fancy type wall mixture of brass, chromium plated, 3 in 1 system with hot and cold arrangement upto 5th floor of bldgs. |
| 74 | Brass CP WHB mixer for mixing hot & cold water screwed down for iron pipe and fixed in repairs |
| 75 | M&L 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs,pillars, window cills, cooking platforms and like in cement mortar (1:4), 15mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with the granite complete all as specified and directed |
| 76 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar incl removal of debries out side MD land. |
| 77 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations |
| 78 | S&F in repairs sink with drainage board made of stainless steel 1 mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915mm x460mm bowl size 405mm x 355mm x 178mm (minimum), including PVC waste pipe 40 mm dia complete all as specified and directed. |
| 79 | S&F in repairs kitchen sinks of Stainless steel 1.00mm thick with plugs, washers and waste pipes and cast iron cantilever brakets including and connecting union to pipe over all size 610mm X 460 mm bowl size 550mm X 400mm X 160mm complete all as specified and directed. |
| 80 | S&F assembled ready to use stainless steel grade 304, kitchen plate rack inlcuding top/middle shelves of 1.0mm thick sheet, square hollow supports, including bottom hooks, spoon holes, front and back open, size 915x915mm as approved and specified. |
| 81 | S&F in repair PVC (SWR) pipes 75 mm size in bore single socketed , in any length with rubber ring joints, fixed to walls including dismantling and breaking of pipe and fittings complete all as specified and as directed. |
| 82 | S&F in repair PVC (SWR) pipes 110 mm size in bore single socketed , in any length with rubber ring joints, fixed to walls including dismantling and breaking of pipe and fittings complete all as specified and as directed. |
| 83 | S&F PVC (SWR) bends 75mm any radius |
| 84 | S&F PVC (SWR) bends 110mm any radius |
| 85 | Cleaning of scales, dirt from 500 ltr capacity PVC tanks, pipe mouth etc over roof of accessible/non accessible roof, including taking down and refixing if required, writing date of cleaning with stensil or other suitable method in Itallic or arial fonts 150mm height all as specified and as directed. |
| 86 | All as per item no 85 above but 1000 ltr capacity tanks. |
| 87 | S&F in repairs HDPE PVC lid (cover) for 500/1000 ltr capacity PVC water tank all as directed. |
| 88 | M&L for rendering 15mm thick in CM 1:3 on fair face of brick or concrete surfaces of sunken floor finished even and smooth without using extra cement complete mixed with and including water proofing compound @ 3% by weight of cement all as specified and directed. |
| 89 | Preparing the new plastered surface sunken floor, removing the dust and laitance etc, Apply one coat of polymer based priming bond coat 1:4:7 (polymer, water and cement) to seal all the pores on the treated surface. Lay 45GSM glass fibre mesh or geo textile on the primed surface while it is in tacky condition. Apply two coats of PU RoofKoat/Davko K10 of approved shade on the Glass Fibre Mesh with a gap of 3-4hrs between the coating complete all as specified and as directed. |
| 90 | Demolition of cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work |
| 91 | Taking down cement plaster on brick or stone walls or concrete ceiling etc, incl raking out joints, hacking for key scrubbing down with water, etc. complete all as specified and directed. |
| 92 | M&L for 15 mm thick rendering on stone masonry surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 93 | M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces of ceiling in cement mortar 1:3 incl finished even and smooth (without using extra cement). |
| 94 | M&L preparation of newly plastered surfaces of wall and applying two coats of distemper oil emulsion white or tint over primer with 1mm wall putty on plastered surface complete all as specified. |
| 95 | M&L preparation of newly plastered surfaces of ceiling and applying two coats of distemper oil emulsion white or tinted over primer with 1mm wall putty on plastered surface complete all as specified. |
| 96 | Removing of old roof treatment including concrete padding or any type of base, lowering from roof and stacking for removal complete all as specified and as directed. |
| 97 | M&L for 10 mm thick rendering in cement mortar 1:4 on concrete surfaces mixed with integral water proofing compound as per manufacturer's instructions, surfaces finished even and smooth without using extra cement including dismantling existing water proofing treatment any type and any thickness from top surface of RCC roof slab and removing the materials outside defence land complete all as specified and directed.(Note:- Water proofing compound shall be measured and paid separately as supply only under relevant item of this schedule) |
| 98 | M&L for PCC, 1:2:4 type B1 (using 20mm graded stone aggregate) as in roof complete all as specified and directed. |
| 99 | Preparing the new plastered surface of roof, removing the dust and laitance etc, Apply one coat of polymer based priming bond coat 1:4:7 (polymer, water and cement) to seal all the pores on the treated surface. Lay 45GSM glass fibre mesh or geo textile on the primed surface while it is in tacky condition. Apply two coats of PU RoofKoat/Davko K10 on the Glass Fibre Mesh with a gap of 3-4hrs between the coating complete all as specified and as directed.Make - STP/Berger/Cico/Pedilite/Asian |
| 100 | Supply only integral water proofing compound complete all as specified and directed. |
| 101 | Removing unserviceable building materials including loading, unloading and disposing at the destination outside MoD land (exceeding 1 km) all as specified and as directed.Note - one cum of material will be treated as one laod |
| 102 | M&L for cleaning the plastered/concrete surfaces and applying water proofing treatment as under:(a) Apply bitumen primer at the rate of 0.27 litre per Sqm as per IS 3384-1986.(b) Apply bonding bitumen of VG-10 @1.20 Kg per Sqm.(c) APP modified water proofing memebrane as per IS 16540/16532-2017 mineral finish , 3mm thick and weighing not less than 3.80 kg per Sqm reinforced polyster/HMHDPE matt black finish over compatible primer/bonding bitumen and finish the top surface with bituminous aluminium paint @ 0.10 Ltr per Sqm complete all as specified and directed. |
| 103 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering. |
| 104 | Dismantling of cement corrugated, semi corrugated sheets in roof coverings. |
| 105 | Dismantling unframed timber scantling 40 sq cm and over in section in any position |
| 106 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 107 | S&F pre-painted galvalume aluminium zinc coating GI based plain sheet steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 108 | S&F 1.8 mm thick plain, galvanised, zinc coating mild steel plain sheeting in ridge, hips, valley gutters, drip and straight flashing (length and grith as fixed) with grade of zinc coating 275. |
| 109 | S & F twin wall/multi wall built, 6-8mm thick, high impact resistance, co-extruded UV layer on both sides, polycarbonate sheet of approved colour and dimension as in roof covering/cladding to walls fixed with self tapping screws including dismantling old sheeting all as specified and directed. |
| 110 | S&F rolled sections as in main and cross beams, hop and jack rafters, purlins where connected to common rafters and running rails and guiders for sliding doors fixed with angle cleats or other connecting plates, conforming to Fe-410-W (Gde-E-250) quality-A. Please Enable Macros to View BoQ information |
| 111 | S&F rolled sections as in main and cross beams, hop and jack rafters, purlins where connected to common rafters and running rails and guiders for sliding doors fixed with angle cleats or other connecting plates, conforming to Fe-410-W (Gde-E-250) quality-A. Please Enable Macros to View BoQ information |
