Tender For Smart Periodical Services And Misc Works For Internal And External Surfaces At Dalhousie Cantt Under Age(I) Dalhousie
Tender Value
9.50 Lakhs
Estimated cost
Bid Submission
10 Jul 2026
1 days left
EMD
19000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dalhousie → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Smart Periodical Services And Misc Works For Internal And External Surfaces At Dalhousie Cantt Under Age(I) Dalhousie
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 03-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 10-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Rendering 15 mm thick in two layers (10+5) on fair facesor other than fair faces of brick work, concrete sruface,stone masonary in cement mortar (1:6), finished even and smooth without using extra cement complete including taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises all as specified and directed by Engr-in-charge.Note: Necessary additional dubbing if required will be done by contractor and necessary form work and scaffolding as required and nothing extra cost is admissible in this account.all as specified and directed. |
| 2 | M&L for Rendering 15 mm thick in two layers (10+5) on other than fair faces of brick work,stone masonary surface, concrete surface in cement mortar (1:4), finished even and smooth without using extra cement complete including taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises all as specified and directed by engr-in-charge.Note: Necessary additional dubbing if required will be done by contractor and necessary form work and scaffolding as required and nothing extra cost is admissible in this account. |
| 3 | M&L for rendering 5mm thick in CM 1:3 on concrete surface of ceiling, chajja etc, finishing the surfaces even and smooth without using extra cement complete including taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises all as specified and directed by engr-in-charge.Note: Necessary additional dubbing if required will be done by contractor and necessary form work and scaffolding as required and nothing extra cost is admissible in this account.all as specified and directed. |
| 4 | Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7\\" /9\\" to make free from dust, loose paint etc by skilled labour complete all as specified and directed. |
| 5 | M & L for water proof cement based putty @ 1 kg (undiluted) per Sqm of average thickness 1mm over the plastered/ old prepared painted surface of wall and sanding of the putty surface with mechanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc by skilled labour as per the following steps:-Step 1 :- Mix the putty powder by adding water as per manufacturer's instruction and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute.Step 2 :- Apply the first coat of the prepared mixer with the help of fully automatic airless spray machine of putty application finishing the surface even and smooth in level without any undulations.Step 3 :- Allow 6-8 hrs time to dry the putty surfaceNote: Where thickness of putty is required more than 1mm thick, the same shall be make good using POP and than putty shall be applied to obtain even & smooth surface. Nothing extra shall be admissible on this account. |
| 6 | M & L for water based premium acrylic smooth exterior emulsion of approved colour with excellent dirt pickup resistance with low VOC less than 50, Antifungal / Anti Algai properties in two coats @ 1.79 litre (undiluted) / 10 Sqm diluted with water as per manufacturer's instruction applied over primed surface with fully automatic airless spray machine of paint application with a flow speed of minimum 1 litre per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in between subsequent coats of paint over single coat of acrylic water based exterior grade primer @ 0.9 litre (undiluted)/ 10sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine and allow 6-8 hours to dry the surface for painting of finishing coats complete all as specified and directed. |
| 7 | M&L applying two coats of oil emulsion distemper complete all as specified and directed. |
| 8 | Note for item No. 4 to 7 :-The work for periodical services shall include the following and the rates quoted by the bidders shall include the same :-(a) The work pertaining to periodical services shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials like Exterior Emulsion paint, putty etc after approval by the AGE(I). (b) Tenderer will have to enter necessary MoU between tenderer, said manufacturers of paints and their authorised apllicator before 30 days from start date of periodical work.(c) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work and protective measures.(d) Removing of Nails, making good holes, cracks etc(e) Work in patches and in narrow / widths, bands, cornices, plasters etc and cutting in edge of line where necessary.(f) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes.(g) Washing floors, cleaning glass, joinery , electric fittings , wirings etc. Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge.(h) Sample patch of 10Sqm be prepared considering all the items of periodical and shall be got approved from AGE(I) prior to carrying out further work. |
| 9 | M&L preparation of old decorated plastered or unplastered surfaces of walls including cornices, pilasters, etc. by washing, rubbing, stopping, brooming down with steel wire brushing scrapping down smoke soots, moulds efflorescent salts and trading oil and greasy spots & providing one coat of oil bound distemper on walls complete all as specified & directed |
| 10 | M&L preparation of old decorated plastered or unplastered surfaces of walls including cornices, pilasters, etc. by washing, rubbing, stopping, brooming down with steel wire brushing scrapping down smoke soots, moulds efflorescent salts and trading oil and greasy spots & providing one coat of cement bases paint on walls complete all as specified & directed |
| 11 | M&L for preparation of new plastered surface of walls and applying three coats of white wash complete all as specified and directed. |
| 12 | M&L for preparation of old decorated plastered or unplastered surfaces of walls including cornices, pilasters, etc. by washing, rubbing, stopping, brooming down with steel wire brushing scrapping down smoke soots, moulds efflorescent salts and trading oil and greasy spots & one coat of white wash on wall complete all as specified & directed |
| 13 | M&L for preparation of old plasterd surface of ceiling and applying one coat of white wash complete all as specified and directed |
| 14 | M&L for preparation of old painted surfaces of wood of any description exc 10 cm width or girth and providing one coat of synthetic enamel paint all as specified and directed. |
| 15 | M&L preparation of surfaces old steel surfaces of any description, over 10cm in width or girth,not otherwise described and one coats of synthetic enamel paint complete all as specified and directed. |
| 16 | Supply and fixing 3mm thick ACP sheet (aluminium composite panel), face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting in blue and silver white or other color combination duly written/pasted the bldg Numbers (bold) letter or figures as directed of size not less than 30cm high each on sheet size 450x450mm and fixed by drilling on walls as specifed height with 06 PVC plug and SS screws not less then 50mm long complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 10, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayJul 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender