Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Bed plywood top with MNF set (FD- 246) (Applicable to item No 01 to 06)Removing the existing unserviceable broken wooden long rail and supply of first class hard wood (Teak wood) new long rail of size 35mmx90mmx1980 mm including 35 mm x 5mm flat iron of mild steel bent to right angles as shown on drg and as directed. |
| 2 | Removing the existing unserviceable broken wooden head board including legs and supply and fix 900x660mm new head board including teak wood legs of size 60mmx60mm and all as specified and as shown on drgs. |
| 3 | Removing the existing unserviceable /broken foot board including legs and supply and fix 900x500mm new foot board including teak wood legs of size 60mmx60mm and all as specified/directed and as shown on drg. |
| 4 | Removing the existing unserviceable /broken wooden stiffeners (supporting pieces) and supply and fix first class hard wooden stiffeners of size 40cmx60cm complete all as specified/directed and as shown on drg. |
| 5 | Removing the existing unserviceable plywood and supply and fix 900mmx1800mm x 12mm thick plywood commercial BWR grade bearing ISI marked all as specified/directed and as shown on drg. |
| 6 | Supply and fix 100mmx100mmx25mm thick teakwood corner bracket and screwed to the leg of bed plywood top all as specified/directed. |
| 7 | Side board (FD-241) (Applicable to item Nos 07 to 16)Removing the existing unserviceable top and supply and fix new top made out of 18mm thick prelaminated MDF Baord, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination not less than 1.5mm thick of sizes 1220mmx455mm etc complete all as specified/directed and as shown on drg. |
| 8 | Removing the existing unserviceable side and supply and fix new side made out of 18mm thick prelaminated MDF Baord, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination not less than 1.5mm thick of sizes 760mmx455mm etc complete all as specified/directed and as shown on drg.Note:-Each side shall be measured as single units. |
| 9 | Removing the existing unserviceable back of side board and supply and fix new back with 6mm thick plywood, grade BWR, type BB, ISI marked of sizes 1220mmx700mm all as specified/directed and as shown on drg. |
| 10 | Removing the existing unserviceable bottom of drawer and supply and fix new 12mm thick plywood, grade BWR, type BB, ISI marked of size 380mmx450mm all as specified/directed and as shown on drg. |
| 11 | Removing the existing unserviceable drawer and supply and fix new drawer of size 380mmx450mmx155mm, made out of plywood 12 mm thick for sides and back and 18mm thick prelaminated MDF Baord exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination for front and 6mm thick plywood for bottom as specified/directed and as shown on drg.Note:-Each drawer will be measured as single unit. |
| 12 | Removing the existing unserviceable shutter and supply and fix new shutter of size 600mmx390mm made out of 18mm thick prelaminated MDF Baord exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, including hinges, and lock all as specified/directed and as shown on drg.Note:- Each shutter will be measured as single unit. |
| 13 | Removing the existing unserviceable bottom of side board and supply and fix new bottom of sizes 455mmx1228mm, made out of 18mm thick plywood, grade BWR, type BB all as specified/directed and as shown on drg. |
| 14 | Removing the existing unserviceable leg frame and supply and fix new teak wood leg frame with legs, sizes 1140mmx 380mm, etc complete all as specified/directed and as shown on drg. |
| 15 | Removing the existing unserviceable broken wooden legs and supply and fix new teak wood leg, size 45mmx45mmx125mm etc complete all as specified/directed and as shown on drg.Note:- Each leg will be measured as single unit. |
| 16 | Supply and fixing of knob and shall be aluminum anoidised (Dark Brown or Brass Cromium Plated ) |
| 17 | Table writing (FD-249, FD-33, FD-275) (Applicable to item Nos 17 to 23)Removing the existing unserviceable broken top and supply and fix new top made out of 18mm thick prelaminated particle board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick teak wood edging, size 1145mmx600mm all as specified/directed and as shown on drg. |
| 18 | Removing the existing unserviceable/ damaged cupboard shutter and supply and fix new shutter made out of 18 mm thick prelaminated particle board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, size 400mmx700mm, including piano hinges and brass lock all as specified/directed and as shown on drg. |
| 19 | Removing the existing unserviceable drawer and supply and fix new drawer size 300mmx600mmx75mm, made out of teak wood plank 12 mm thick for sides and back and 18mm thick prelaminated particle board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination for front and 6mm thick plywood for bottom of drawer (Plywood, grade BWR, type BB with no. of ply 5) including fittings such as knobs etc all as specified/directed and as shown on drg.Note:- Each drawer will be measured as single unit. |
| 20 | Removing the existing unserviceable back and supply and fix new back size 1145mmx700mm, made out of 6mm thick Plywood grade BWR, type BB, no. of ply 5, with two coats of synthetic enamel paint over a coat of primer all as specified/directed and as shown on drg. |
| 21 | Removing the existing unserviceable side and supply and fix new side size 600mmx700mm, made out of prelaminated particle board, 18mm thick exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination all as specified/directed and as shown on drg.Note:- Each side will be measured as single unit. |
| 22 | Removing the existing unserviceable leg and supply and fix new teak wood leg size 35mmx55mmx717mm, etc complete all as specified/directed and as shown on drg. |
| 23 | Supply and fixing of knob and shall be aluminum anoidised (Dark Brown or Brass Cromium Plated ) |
| 24 | TABLE DINING 4 PERSONS (FD/MAP II/3) (Applicable to item Nos 24 to 27) :Removing the existing unserviceable damaged top and supply and fix new top of size 1200mmx900mm prelaminated particle board 18mm with 6 mm thick teak wood edging all round etc complete all as specified and shown on drgs. |
| 25 | Removing the existing unserviceable damaged front and back rails and supply and fix new teak wood front and back rails of size 1200mmmmx100mmx25mm all as specified and shown on drg. |
| 26 | Removing the existing unserviceable damaged leg and supply and fix new teak wood leg of size 760mmx75mmx40mm all as specified and as shown on drg. |
| 27 | Removing the existing unserviceable damaged side rails and supply and fix new teak wood side rails of size 900mmx100mmx25mm all as specified and as shown on drg. |
| 28 | Table dining 6 persons1500mm x 900mm (FD-273, FD-239, FD/MAP-II/03) (Applicable to item Nos 28 to 32)Removing the existing unserviceable damaged top and supply and fix with a new prelaminated MDF board 18mm thick BW typewith 1.5mm thick decorative with with 4mm thick teak wood edging all round of size 1500mmx900mm all as specified/directed and as shown on drg. |
| 29 | Removing the existing unserviceable damaged long rails & supply and fix new teak wood long rail of size 25mmx100mmx1500mm all as specified/directed and as shown on drg |
| 30 | Removing the existing unserviceable damaged leg and supply and fix new teak wood leg of size 75mmx40mmx760mm all as specified/directed and as shown on drg . |
| 31 | Removing the existing unserviceable damaged side rails and supply and fix new teak wood side rails of size 25mmx100mmx900mm all as specified/directed and as shown on drg. |
| 32 | Removing the existing unserviceable 4 corner wooden bracket size 25mmx100mmx100mm and supply and fix 4 corner wooden bracket size 25mmx100mmx100mm all as specified/directed and as shown on drg |
| 33 | Table dining 8 persons 1800mm x 900mm (FD-273, FD-239, FD/MAP-II/03) (Applicable to item Nos 33 to 37)Removing the existing unserviceable damaged top and supply and fix new top with a new prelaminated MDF board 18mm thick BW typewith 1.5mm thick decorative with with 4mm thick teak wood edging all round of size 1800mmx900mm all as specified/directed and as shown on drg.. |
| 34 | Removing the existing unserviceable damaged long rail & supply and fix new long rail made of teak wood size 25mmx100mmx1800mm and all as specified/directed and as shown on drg.. |
| 35 | Removing the existing unserviceable damaged leg and supply and fix new teak wood leg all as specified and as shown on drg of size 75mmx40mmx760mm. |
| 36 | Removing the existing unserviceable damaged side rails and supply and fix new teak wood side rails of size 25mmx100mmx900mm all as specified and as shown on drg . |
| 37 | Removing the existing unserviceable damaged Bracket and Supply and fixing of 4 corner wooden bracket size 25mmx100mmx1000mm. (Set of 04) |
| 38 | Table peg (FD-384, FD-25, FD-236) (Applicable to item Nos 38 to 41)Removing the existing unserviceable top and supply and fix new top of size 450x300 mm made out of 18mm thick pre-laminated MDF board BW Type with 1.5mm thick decorative with with 4mm thick teak wood edging all round to the top of Peg table all as specified and as shown on drg. |
| 39 | Removing the existing unserviceable bottom rail and supply and fix new teak wood bottom rail of size 20mmx40mmx300mm all as specified and as shown on drg. |
| 40 | Removing the existing unserviceable long rail and supply and fix new teak wood long rail of size 20mmx 40mmx450mm and 4 corner wooden bracket size 20mmx40mmx40mm all as specified and as shown on drg. |
| 41 | Removing the existing unserviceable leg and supply and fix new teak wood leg of size 30x50x380 mm all as specified and as shown on drg. |
| 42 | Table centre (FD-29, FD-274, FD-235) (Applicable to item Nos 42 to 46)Removing the existing unserviceable top and supply and fix new top of size 900mm x 450mm made out of 18mm thick pre-laminated MDF board BW Type with 1.5mm thick decorative with with 4mm thick teak wood edging all round of table top all as specified and as shown on drg. |
| 43 | Removing the existing unserviceable leg and supply and fix new teak wood leg of size 30mmx60mmx400mm all as specified and as shown on drg. |
| 44 | Removing the existing unserviceable long rail of size 30mmx60mmx900mm and supply and fix new teak wood long rail and all as specified and as shown on drg. |
| 45 | Removing the existing unserviceable short rail of size 30mmx60mmx450mm and supply and fix new teak wood short rail all as specified and as shown on drg. |
| 46 | Supply and fixing of 4 corner wooden bracket size 20mmx40mmx40mm. (Set of 04) |
| 47 | Teapoy (FD-34 FD-278 FD-232 FD-382 ) (Applicable to item Nos 47 to 50)Removing the existing unserviceable top and supply and fix new top of size 600mmx450mm made out of 18mm thick pre-laminated MDF Baord exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination with 4mm thick teak wood edging al-round the top of teapoy all as specified and as shown on drg. |
| 48 | Removing the existing unserviceable leg and supply and fix new teak wood leg of size 515mmx45mmx45mm all as specified and as shown on drg. |
| 49 | Removing the existing unserviceable long rail and supply and fix new teak wood of size 450mmx50mmx20mm and 4 corner wooden bracket size 20mmx40mmx40mmall as specified and as shown on drgs. |
| 50 | Removing the existing unserviceable side rail and supply and fix new teak wood side rail of size 390mmx50mmx20mm all as specified and as shown on drgs. |
| 51 | Sofa sets (FD-281) (Applicable to item Nos 51 to 59)Removing the existing unserviceable tapestry cloth, cushion and replacing with new tapestry cloth as per sample with foam cushion of size 560mmx530mm, 40 density, 100mm thick, including inner cloth all as shown on drgs and as directed.Note :- Each cushion for seat or back will be measured as single unit. |
| 52 | Removing the existing unserviceable leg from Sofa and supply and fix new teak wood leg of size 35mmx75mmx510mm all as shown on drg and as directed. |
| 53 | Removing the existing unserviceable arm rest from sofa and supply and fix new teak wooden arm rest size 70mmx35mmx725mm all as shown on drawing and as directed . |
| 54 | Removing the existing unserviceable side rail from sofa and supply and fix new teak wood side rail of size 35mmx100mmx690mm all as shown on drawing and as directed . |
| 55 | Removing the existing unserviceable bearer from sofa long pieces and supply and fix new teak wood bearer of size 1590mmx50mmx22mm all as shown on drawing and as directed . |
| 56 | Removing the existing unserviceable bearer from sofa short pieces and supply and fix new teak wood bearer of size 440mmx50mmx22mm all as shown on drawing and as directed . |
| 57 | Removing the existing unserviceable battens from sofa and supply and fix new teak wood battens of size 570mmx50mmx22mm all as shown on drawing and as directed . |
| 58 | Removing the existing unserviceable front rail from sofa long pieces and supply and fix new teak wood front rail all as shown on drawing and as directed . |
| 59 | Removing the existing unserviceable front rail from sofa short pieces and supply and fix new teak wood front rail of size 22mmx102mmx1740mm all as shown on drawing and as directed . |
| 60 | Sofa set (FD-258) (Applicable to item Nos 60 to 67)Removing the existing unserviceable tapestry cloth, cushion and replacing with new tapestry cloth with foam cushion 40 density, 50 mm thick all as shown on drgs and as directed. Note:- Each cushion for seat or back will be measured as single unit. Tapestry cloth to be provided as per sample. |
| 61 | Removing unserviceable plywood 12 mm from seat of sofa set and fix new plywood 12 mm ISI marked BWR grade of size 670mm x 690mm for chairs and as specified in drg |
| 62 | Removing unserviceable Plywood 12 mm from seat of sofa set and fix new plywood 12 mm ISI marked BWR grade of size 1740mmx 690mm for chairs and as specified in drg |
| 63 | Removing the existing unserviceable front leg from Sofa and supply and fix new teak wood leg of size 30mm x 75mm x 510mm all as shown on drg and as directed. |
| 64 | Removing the existing unserviceable back leg from Sofa and supply and fix new teak wood leg of size 30mm x 75mm x 760mm all as shown on drg and as directed. |
| 65 | Removing the existing unserviceable wooden front bearer from Sofa and supply and fix new teak wood front bearer of size 20mm x 50mm x 1740mm all as shown on drg and as directed |
| 66 | Removing the existing unserviceable side rail from Sofa and supply and fix new teak wood side rail of size 30mm x 102mm x 690mm all as shown on drg and as directed. |
| 67 | Removing the existing unserviceable back support rail from sofa and supply and fix new teak wood back support rail of size 20mm x 102mm x 1740mm all as shown on drg and as directed. |
| 68 | Sofa set (TP)Removing the existing unserviceable fabric, cushion and replacing with new leatherette with foam cushion 40 density, 50 mm thick all as shown on drgs and as directed. Note:- 05 Seater Sofa for seat or back will be measured as single unit. leatherette to be provided as per sample. |
| 69 | Book case (FD-237)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/abbrassive cloth throughly smooth and clean off and applying one coat of french polishing to required finish complete all as specified and as directed. |
| 70 | Side Board (FD-241)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed. |
| 71 | Table 900x600 with Drawer (FD-41,FD-283, FD-224, FD-55)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed. |
| 72 | Table bed side (FD-28, FD-276,FD-243)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed. |
| 73 | Table Dressing Gents (FD-31, FD-230) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed. |
| 74 | Table Dressing Ladies (FD-32 FD-251) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed. |
| 75 | Bed plywood top (FD-246) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed. |
| 76 | Binsoiled linen large (FD-70) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed. |
| 77 | Chair dining(FD-16 FD-279) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish complete all as specified and as directed. |
| 78 | Chair dining Map (FD/MAP II/04) : Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish complete all as specified and as directed. |
| 79 | Chair Easy (FD-17 FD-229)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed. |
| 80 | Chair writing (FD-20 FD-280)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed. |
| 81 | Hat stand with mirror (FD-233)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed. |
| 82 | Peg table (FD-384 FD-25 FD-236) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed. |
| 83 | Sofa Set 4 Seater (FD-258) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying ono coat of french polish to required finish complete all as specified and as directed. |
| 84 | Sofa Set 5 Seater (FD-281) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed. |
| 85 | Stool Dressing (FD-27)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed. |
| 86 | Table 900x600 W/o Drawer (FD-284 FD-42) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed. |
| 87 | Table Centre (FD-29 FD-274 FD-235)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed. |
| 88 | Table dining 4 persons (FD/MAP II/3)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed. |
| 89 | Table dining 6 persons (FD-273 FD-239) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed. |
| 90 | Table dining 8 persons (FD-273 FD-239)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed. |
| 91 | Table office officer wooden (DB-4199)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish complete all as specified and as directed. |
| 92 | Table writing (FD-249 FD-33 FD-275) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed. |
| 93 | Teapoy (FD-34 FD-278 FD-232 FD-382 ) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed. |
| 94 | Book Case FD (FD-237): Removing the existing unserviceable Back of book case and S&F New back with 6mm thick plywood commercial ISI marked all as specified and shown on drgs for following sizes 1220mmx700mm |
| 95 | Removing the existing unserviceable Leg frame and S&F teak wood Leg frame with legs all as specified and shown on drgs. |
| 96 | Removing the existing unservicable broken legs and S&F new teak wood leg and shall be measured as single unit. |
| 97 | Removing the existing unservicable Shutter ans S&F New Shutter Made out of 18mm thick prelaminated particle board (Nova pan) including Hinges and lock all shown on drgs (Each shutter will be measured as single unit) for the following size 76mmx61mm. |
| 98 | Bin lenin multipurpose ((FD/E6/MAP/09))Supply & fix in repair of unserviceable top made of 18/19 mm thick Prelaminated Particle board exterior grade of approved shade, with 4 mm thick Teak wood beading all around the top complete all as shown in drawings and directed by Engineer-in Charge. |
| 99 | S & F in Replacement of shutter both side left & right made of 18/19 mm Prelaminated Particle board exterior grade of approved shade with 4 mm Teak wood beading all as specified in drg and as directed by Engineer-in-Charge. |
| 100 | S & F in Replacement of unserviceable front face of drawer with 18/19 mm Prelaminated Particle board exterior grade of approved shade with 4 mm Teak wood beading all as specified in drg and as directed by Engineer-in-Charge. |
| 101 | S & F in Replacement of unserviceable back ply wood 6 mm thick BWR grade all as specified in drg and as directed by Engineer-in-Charge. |
| 102 | S & F in Replacement of unserviceable metalic knob with 'D' type stainless steel handle as approved all as specified in drg and as directed by Engineer-in-Charge. |
| 103 | S & F in Replacement of unserviceable telescopic channel of all drawer with best quality telescopic channel 12\\" length all as specified in drg and as directed by Engineer-in-Charge. |
| 104 | Table Computer(TP)Removing the existing unserviceable telescopic channel from keyboard and Drawer and supply and fixing new telescopic channels best quality all as specified and as directed at site. Make : Godrej/Link/Hettich required in existing key board tray and drawer. |
| 105 | Removing the existing unserviceable Handle/Knob and supply and fixing of new Stainless steel \\"D\\" type handle of size 150mm of approved quality all as specified and as directed at site. |
| 106 | Removing the existing unserviceable Top and Keyboard tray and any part of computer table and supply and fix computer table top of size 2' x 4' top/as per size reqd and Keyboard tray and any part of computer table with prelaminated particle board exterior grade 18mm thick all as specified and as directed at site. |
| 107 | TV trolley ((FD/E6/MAP-04) )S&F Stainless steel \\"D\\" type handle of size 150mm of approved quality including removing the existing unsevicable Handles of drawers of TV trolley complete all as specified and directed. |
| 108 | S&F 18 mm thick Prelaminated particle board for Top of TV Trolley with 4mm thick teak wood beading duly polished all around as per drawing including removing the existing unsevicable Top of TV trolley complete all as specified and directed. |
| 109 | S&F 18 mm thick Prelaminated particle board for sides of TV Trolly with 4mm thick teak wood beading duly polished all around all as per drawing including removing the existing unsevicable Sides of TV trolley complete all as specified and directed. |
| 110 | S&F 5 mm thick glass shutter with magnetic catcher for TV Trolly as per drawing including removing the existing unservicable/Broken Glass shutter of TV trolley complete all as specified and directed. |
| 111 | S&F Castors Wheels of best quality as approved all as per drawing including removing the existing unservicable/Broken Castors wheels of TV trolley complete all as specified and directed. |
| 112 | Chair Dining(FD-16 ,FD-279)Removing the existing unserviceable cane from chair dining of size 440mm x 430mm and recanning with new best quality of plastic cane size 1.80mm x 0.46 mm for weaving and 3mm x 0.60 mm for beading as per Godrej pattern all as specified and as directed. |
| 113 | Chair writing(FD-20, FD-280)Removing the existing unserviceable cane from Chair writing of size 535mm x 470mm and recanning with new best quality of plastic cane size 1.80mm x 0.46 mm for weaving and 3mm x 0.60 mm for beading as per Godrej pattern as specified/directed. |
| 114 | Chair easy(FD-17, FD 229)Removing the existing unserviceable cane from Chair easy seat/back rest of size 575mm x 510mm & 420mm x 330mm and recanning with new best quality of plastic cane size 1.80mm x 0.46 mm for weaving and 3mm x 0.60 mm for beading as per Godrej pattern as specified/directed. |
| 115 | Stool Dressing CB(FD- 27, FD-282, FD-374)Removing the existing unserviceable cane from stool dressing CB of size 420mm x 275mm and recanning with new best quality of plastic cane size 1.80mm x 0.46 mm for weaving and 3mm x 0.60 mm for beading as per Godrej pattern as specified/directed. |
| 116 | Chair Verandah (FD-19, FD-256, FD-359) (Applicable to item Nos 116 to 118)Removing the existing unserviceable cane from chair verandah of size 480mm x 460mm and recanning with best quality of plastic cane 4mm wide as per trade pattern as specified/directed. |
| 117 | Material and labour for preparing old steel surfaces of frame of chair verandah with one coat of synthetic enamel paint white colour, as shown on drawing and all as specified/directed. |
| 118 | Supply and fix new hard rubber toes of appropriate size, suitable to chair verandah as shown on drawing and all as specified/directed. |
| 119 | Chair Dining FD (FD-16,FD-179) (Applicable to item Nos 119 to 126)Removing the existing unserviceable rear leg and supply and fix new teak wood rear leg of size 890mmx65mmx65mm complete all as shown on drg and as specified/directed. |
| 120 | Removing the existing unserviceable front leg and supply and fix new teak wood front leg of size 455mmx45mmx45mm complete as shown on drg and as specified/directed. |
| 121 | Removing the existing unserviceable back rest and supply and fix new teak wood back rest of size 380mmx50mmx19mm complete as shown on drg and as specified/directed. |
| 122 | Removing the existing unserviceable front rail and supply and fix new teak wood front rail of size 400mmx65mmx30mm including drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed. |
| 123 | Removing the existing unserviceable rear rail and supply and fix new teak wood rear rail of size 400mmx65mmx30mm including drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed. |
| 124 | Removing the existing unserviceable side rails and supply and fix new teak wood side rails of size 380mmx65mmx30mm including drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed. |
| 125 | Removing the existing unserviceable side stiffner and supply and fix new teak wood side stiffner of size 430mmx20mmx25mm including drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed. |
| 126 | Removing the existing unserviceable middle stiffner and supply and fix new teak wood middle stiffner of size 430mmx20mmx25mm including drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed. |
| 127 | Chair Writing (FD-20, FD-280)(Applicable to item Nos 127 to 135)Removing the existing unserviceable rear leg and supply and fix new teak wood rear leg of size 890mmx65mmx65mm complete as shown on drg and as specified/directed.. |
| 128 | Removing the existing unserviceable front leg and supply and fix new teak wood front leg of size 675mmx45mmx45mm complete as shown on drg and as specified/directed. |
| 129 | Removing the existing unserviceable back rest and supply and fix new teak wood back rest of size 445mmx65mmx12mm complete as shown on drg and as specified/directed. |
| 130 | Removing the existing unserviceable front rail and supply and fix new teak wood front rail of size 490mmx65mmx30mm including drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed. |
| 131 | Removing the existing unserviceable rear rail and supply and fix new teak wood rear rail of size 440mmx65mmx30mm including drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed. |
| 132 | Removing the existing unserviceable side rails and supply and fix new teak wood side rails 440mmx65mmx30mm including drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed. |
| 133 | Removing the existing unserviceable/ broken Arm rest and supply and fix new teak wood Arm rest of size 495mmx50mmx19mm complete as shown on drg and as specified/directed. |
| 134 | Removing the existing unserviceable side stiffner and supply and fix new teak wood side stiffner of size 470mmx20mmx25mm including drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed. |
| 135 | Removing the existing unserviceable middle stiffner and supply and fix new teak wood side stiffner of size 535mmx20mmx25mm including drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed. |
| 136 | Chair easy FD (FD-17, FD-229) (Applicable to item Nos 136 to 141)Removing the existing unserviceable rear leg and supply and fix new teak wood rear leg of size 535mmx40mmx40mm complete as shown on drg and as specified/directed. |
| 137 | Removing the existing unserviceable front leg and supply and fix new teak wood front leg of size 535mmx40mmx40mm complete as shown on drg and as specified/directed. |
| 138 | Removing the existing unserviceable broken Arm rest and supply and fix new teak wood arm rest of size 610mmx55mmx25mm complete as shown on drg and as specified/directed. |
| 139 | Removing the existing unserviceable front frame and supply and fix new teak wood front frame of size 510mmx55mmx25mm including drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed. |
| 140 | Removing the existing unserviceable front rail and supply and fix new teak wood front rail of size 510mmx55mmx25mm complete as shown on drg and as specified/directed. |
| 141 | Removing the existing unserviceable rear rail and supply and fix new teak wood rear rails of size 500mmx50mmx25mm complete as shown on drg and as specified/directed. |
| 142 | Stool Dressing CB (FD-27, FD-282, FD-374) (Applicable to item Nos 142 to 144)Removing the existing unserviceable leg and supply and fix new teak wood leg of size 350mmx40mm complete as shown on drg and as specified/directed. |
| 143 | Removing the existing unserviceable front rail and supply and fix new teak wood front rail of size 355mmx50mmx25mm including drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed. |
| 144 | Removing the existing unserviceable side rails and supply and fix new teak wood side rails of size 220mmx50mmx25mm including drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed. |
| 145 | Chair dining JCO/OR (FD/MAP II/05) (Applicable to item Nos 145 to 152)Removing unserviceable PVC seat of chair dining JCO/OR and supply and fix new PVC seat of size 430mm(L)x440mm(front)/405mm(back) (W) made out of 04/05 mm thick complete all as shown on drg and as specified/directed |
| 146 | Removing unserviceable front leg of chair dining JCO/OR and supply and fix new teak wood leg of size 460mmx55mm x 30mm complete as shown on drg and as specified/directed. |
| 147 | Removing unserviceable back leg of chair dining JCO/OR and supply and fix new teak wood back leg of size 890mm x 55mm x 30mm duly curved, complete all as shown on drg and as specified/directed. |
| 148 | Removing unserviceable side rail of chair dining JCO/OR and supply and fix new teak wood side rail of size 430mmx65mm x 30mm complete all as shown on drg and as specified/directed. |
| 149 | Removing the unserviceable front rail of chair dining JCO/OR and supply and fix new teak wood front rail of size 420mmx65mm x 30mm complete as shown on drg and as specified/directed. |
| 150 | Removing unserviceable back rail of chair dining JCO/OR and supply and fix new teak wood back rail of size 405mm x 65mmx30mm complete all as shown on drg and as specified/directed. |
| 151 | Removing unserviceable side Stiffner of chair dining JCO/OR and supply and fix new teak wood side Stiffner of size 430mmx25mmx20mm complete all as shown on drg and as specified/directed. |
| 152 | Removing unserviceable middle Stiffner of chair dining JCO/OR and supply and fix new teak wood middle Stiffner of size 440mmx25mmx20mm as shown on drg and as specified/directed. |
| 153 | Chair tubular steel with / without arms (FD-75) (Applicable to items Nos 153 to 159)Material and labour for preparing the surfaces of old steel tubular frame of the chair with one coat of synthetic enamel paint smoke grey shade for chair tubular steel with arms all as directed/specified and as sshown on drg. |
| 154 | Material and labour for preparing the surfaces of old steel tubular frame of the chair with one coat of synthetic enamel paint smoke grey shade for chair tubular steel without arms all as directed/specified and as shown on drg. |
| 155 | Removing the existing unserviceable/damaged seats from chair tubular steel with/without arms and supply and fix new seats of size 480mmx450x25mmx4 made out of teak wood frame with half round beading at edges and recanning with new best quality of plastic cane size 2.0mm x 0.46 mm for weaving and 3mm x 0.60 mm for beading as per Godrej pattern as specified/directed all as directed/specified and as shown on drg. |
| 156 | Removing the existing unserviceable/damaged back from chair tublular steel with/without arms and supply and fix new back of size 480mmx45mmx25mmx4 made out of teak wood frame all as directed/specified and and recanning with new best quality of plastic cane size 2.0mm x 0.46 mm for weaving and 3mm x 0.60 mm for beading as per Godrej pattern as specified/directed as shown on drg. |
| 157 | Removing the existing unserviceable/broken arm rest and supply and fix new arm rest of size 380mmx50mmx25mmx2 with 1st class hard wood made to shape and painted with two coats of black synthetic enamel paint for chair tubular steel with arms all as directed/specified and as shown on drg. |
| 158 | Removing the existing unserviceable rubber shoes from bottom of chair and supply and fix new hard rubber shoes to the bottom of chair all as directed/specified and as shown on drg. |
| 159 | Removing the existing unserviceable PVC/rubber plug from top of chairs and supply and fix new PVC / rubber plug to the top of chair all as directed/specified and as shown on drg. |
| 160 | Chair School with hand board (TP) (Applicable to items Nos 160 to 163)Material and labour for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint black on all external surfaces all as specified/directed and as shown on drg. |
| 161 | Removing the existing unserviceable/damaged PVC back and seat from chair school and supply and fix new PVC back and seat all as directed/specified and as shown on drg. |
| 162 | Removing the existing unserviceable 18mm pre laminated particele board top openable with PVC edging (Hinged on RHS) screwed to 25mm all as specified/directed and as shown on drg. |
| 163 | Removing the existing unserviceable/damaged bag stand at bottom of chair and supply and fix new bag stand all as specified/directed and as shown on drg. |
| 164 | Chair dining Officers (FD/MAP II/04) (Applicable to item Nos 164 to 171)Removing unserviceable seat of chair dining officers with cushion and supply and fix new seat of size 450mmx450mm made out of 75 mm thick 40 Density foam covered with tapestry cloth nailed to 12 mm thick Phenol Bonded plywood commercial, complete all as shown on drg and as specified/directed |
| 165 | Removing unserviceable front leg of chair dining officers and supply and fix new teak wood leg of size 420mmx50mm x 35mm complete as shown on drg and as specified/directed. |
| 166 | Removing unserviceable back leg of chair dining officers and supply and fix new teak wood back leg of size 950mm x 50mm x 35mm duly curved, complete all as shown on drg and as specified/directed. |
| 167 | Removing unserviceable side rail of chair dining officers and supply and fix new teak wood side rail of size 450mmx65mm x 25mm complete all as shown on drg and as specified/directed. |
| 168 | Removing the unserviceable front rail of chair dining officers and supply and fix new teak wood front rail of size 420mmx65mm x 25mm complete as shown on drg and as specified/directed. |
| 169 | Removing unserviceable back rail of chair dining officers and supply and fix new teak wood back rail of size 420mm x 90mmx25mm complete all as shown on drg and as specified/directed. |
| 170 | Removing unserviceable side Stiffner of chair dining officers and supply and fix new teak wood side Stiffner of size 450mmx25mmx20mm complete all as shown on drg and as specified/directed. |
| 171 | Removing unserviceable middle Stiffner of chair dining officers and supply and fix new teak wood middle Stiffner of size 420mmx25mmx20mm as shown on drg and as specified/directed. |
| 172 | Hat Stand with mirror (FD-233) (Applicable to item Nos 172 to 174) Removing unserviceable plywood from hat stand and supply and fix new plywood 4mm thick, one side teak face finish of size 1000mm x 710 mm including teak wood edging size 6 mm x 35 mm duly polished complete all as shown on drg and as specified/directed. |
| 173 | Removing unserviceable mirror from hat stand and supply and fix new 5 mm thick mirror of size 300 mm x 440 mm including teak wood edging size 10 mm x 12 mm as shown on drgs and as specified/directed. |
| 174 | Removing unserviceable aluminium pegs from hat stand and supply and fix new brass pegs of size120mmx75 mm (over all) with brass screws as shown on drgs and as specified/directed. |
| 175 | Table 900X600 w/o drawer (FD-42, FD-284) (Applicable to item Nos 175 to 178)Removing the existing unserviceable table top and supply and fix new top of size 900mmx600mm of prelaminated particle board 18mm of size interior grade with 4mm thick teak wood edging all round all as specified and as shown on drgs. |
| 176 | Removing the existing unserviceable/damaged front and back rails and supply and fix new teak wood front and back rails of size 25mmx130mmx740mm all as specified and as shown on drg. |
| 177 | Removing the existing unserviceable damaged leg and supply and fix new teak wood leg of size 60mm to 40mm(bottom) with a height of 735mm all as specified and as shown on drg. |
| 178 | Removing the existing unserviceable damaged side rails and supply and fix new teak wood side rails of size 25mmx130mmx440mm all as specified and as shown on drg. |
| 179 | Table dressing with mirror ladies (FD-32 FD-251/(FD/MAP/II/07) (Applicable to item Nos 179 to 191)Removing the existing unserviceable drawers and supply and fix new drawers of size 300mmx380mm & 315mmx115mm made out of 18mm thick pre-laminated MDF board BW Type with 1.5mm thick decorative with PVC lipping alround, prelaminated one side with decorative choice lamination & other side balancing white lamination for front and 6 mm thick plywood, grade BWR, type BB with no. of ply 5 for bottom of drawers, including fittings such as knobs etc all as specified and as shown on drg.Note:-Each drawer shall be measured as single unit. |
| 180 | Removing the existing broken glass shutters and supply and fix new glass shutters of size 300mmx390mm all as specified and as shown on drgs.Note:- Each glass shutter will be measured as single unit. |
| 181 | Removing the existing unserviceable aluminium channel and supply and fix new aluminium channel of width 10mm thick suitable for the drawer of size 530mm long all as shown on drgs. |
| 182 | Removing the existing unserviceable plywood portion from back of mirror and supply and fix new back with frame of size 395mmx1230mm made out of 6 mm thick plywood, grade BWR, type BB with no of ply 5 all as specified and as shown on drgs. |
| 183 | Removing the existing unserviceable mirror and supply and fix new mirror of size 366mmx1220mm, 5 mm thick complete all as specified and shown on shown on drgs. |
| 184 | Removing the existing unserviceable 12mm ply wood from back and supply and fix new back of size 395mmx900mm of table dressing ladies made out of 12 mm thick plywood commercial quality all as specified and as shown on drgs. |
| 185 | Removing the existing unserviceable frame with legs and supply and fix new teak wood frame with 4 legs of size 235mmx40mmx25mm & 650mmx40mmx25mm all as specified and shown on drgs. |
| 186 | Removing the existing unserviceable leg and supply and fix new leg made out of teak wood of 04 Nos legs of size 155x45x45mm all as specified and as shown on drgs.Note:- Each leg shall be measured as single unit. |
| 187 | S&F in Replacement of unserviceable cushion of stool dressing of table dressing ladies (MAP) with 75mm thick 40 density cushion including upholstry of best quality tapestry cloth of approved colour and texture complete all as specified on drg and as directed by Engineer-in-Charge. Cost of tapestry cloth should not be less than 350/- per meter. |
| 188 | S&F in Replacement of unserviceable caster wheel of stool dressing of table dressing ladies (MAP) with heavy duty best quality caster wheel of approved quality all as specified on drg and as directed by Engineer-in-Charge. |
| 189 | S&F in Replacement of unserviceable telescopic channel 12\\" length of best quality for drawer complete all as specified on drg and as directed by Engineer-in-Charge. |
| 190 | S&F in Replacement of unserviceable knob of shutter and drawer with D type stainless steel handle of approved quality to be provided as specified and directed by Engr-in-Charge. |
| 191 | S&F in Replacement of unserviceable front face board of drawer of 18/19mm thick prelaminated particle board complete all as specified on drg and as directed by Engineer-in-Charge. |
| 192 | Table dressing with mirror gents (FD-31,FD-230) (Applicable to item Nos 192 to 196)Removing the existing unserviceable top of table dressing Gents and supply and fix new top of size 900mmx300mm made out of 18mm thick pre-laminated MDF board BW Type with 1.5mm thick decorative with PVC lipping all exposing area all as shown on drgs |
| 193 | Removing the existing unserviceable bottom of table dressing Gents and suplply and fix new bottom of size 900mmx300mm made out of 18 mm thick plywood commercial quality all as shown on drgs. |
| 194 | Removing the existing unserviceable side partition and supply and fix new side partition of size 300mmx135mm made out of 18mm thick pre-laminated MDF board BW Type all as shown on drg. Note : Each side or partition shall be measured as single unit. |
| 195 | Removing the existing unserviceable drawers of size 4x280mmx130mm of table dressing Gents and supply and fix new drawers made out of teak wood plank 12mm thick for sides and back and 18mm thick pre-laminated MDF board BW Type for front and 6 mm thick plywood for bottom of drawers with fitting such as knobs etc all as specified and as shown on drg. Note : Each drawer shall be measured as single unit. |
| 196 | Removing the existing unserviceable mirror and supply and fix new mirror of size 390mmx760mm, 5mm thick with back and frame all as specified and as shown on drgs including with teak wood support all as shown on drgs and as directed. |
| 197 | Table 900X600 with drawer (FD-41, FD-283, FD-224,FD-55) (Applicable to item Nos 197 to 200)Removing the existing unserviceable table top and supply and fix new top of size 900mmx600mm of 18mm thick pre-laminated MDF board with 4mm thick teak wood edging all round all as specified and as shown on drgs. |
| 198 | Removing the existing unserviceable/damaged front and back rails and supply and fix new teak wood front and back rails of size 25mmx130mmx740mm all as specified and as shown on drg. |
| 199 | Removing the existing unserviceable damaged leg and supply and fix new teak wood leg of size 60mm to 40mm(bottom) with a height of 735mm all as specified and as shown on drg. |
| 200 | Removing the existing unserviceable damaged side rails and supply and fix new teak wood side rails of size 25mmx130mmx440mm all as specified and as shown on drg. |
| 201 | Table bed side (FD/E6/MAP/15(R) (Applicable to item Nos 201 to 205)Removing of UNSV top from table bed side and supply and fixing new top made out of 18mm thick prelaminated particle board with PVC edging fixed to frame all as shown on drawing and all as directed by Engineer-in-charge |
| 202 | Removing of UNSV side from table bed side and supply and fixing new side made out of 18mm thick prelaminated particle board fixed to frame with suitable size of screws all as shown on drawing and all as directed by Engineer-in-charge |
| 203 | Removing of UNSV back ply from table bed side and supply and fixing new back made out of 18mm thick plywood fixed to frame with suitable size of screws all as shown on drawing and all as directed by Engineer-in-charge |
| 204 | Removing of UNSV drawers from table bed side and supply and fixing new drawer made out of 18mm thick prelaminated particle board all as shown on drawing and all as directed by Engineer-in-charge |
| 205 | Removing of UNSV handle from table bed side and supply and fixing new handle of size 100mm long MS all as shown on drawing and all as directed by Engineer-in-charge |
| 206 | Table without drawer for Havs & ORs steel 900 X 600 X 760mm (FD-1007) (Applicable to items Nos 206 to 209)Removing the existing unserviceable top and supply and fix new top of particle board commercial 18 mm thick exterior grade pasted with 1.5 mm thick plastic laminated sheet fixed on top as directed and as shown on drgs. |
| 207 | Removing the existing unserviceable/damaged frame and replacing with new frame of 25mm x 25mm square ms tube 1.6 mm thick welded and applying one coat of red oxide primer including welding to the table and all as specified and as shown on drgs. |
| 208 | Removing the existing unserviceable/damaged leg and replacing with new leg of 25mm x 25mm square ms tube 1.6 mm thick welded and applying one coat of red oxide primer including welding to the table and all as specified and as shown on drgs. |
| 209 | Material and labour for preparing old steel surfaces of steel frame of table 900x600x760 mm with one coat of synthetic enamel paint all as specified and as shown on drgs. |
| 210 | Table 900x600 with Drawer (FD-41, FD-283, FD-224, FD-55)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed. |
| 211 | Chair dining (FD-16, FD-279)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish complete all as specified and as directed. |
| 212 | Chair dining Map (FD/MAP II/04) : Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish complete all as specified and as directed. |
| 213 | Chair Easy (FD-17,FD-229)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed. |
| 214 | Chair writing (FD-20, FD-280)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed. |
| 215 | Hat stand with mirror (FD-233)Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
