|
| 1 | Demolition of PCC of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 2 | M&L for 25mm thick cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in sub base for tiling including demolition of PCC, complete all as specified and directed. |
| 3 | M&L for non skid ceramic coloured tiles of size 400 x 400 x 7 to 8 mm thick, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:4, after dismantling old unserviceable of tiles, complete all as specified and directed. |
| 4 | M&L for non skid ceramic coloured tiles size 600 x 600 x 10 mm thick, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:4, after dismantling old unserviceable of tiles, complete all as specified and directed. |
| 5 | M&L for glazed ceramic coloured tiles of size 300 x 450 x 7mm thick, on vertical surface of wall such as dado, skirting, riser etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick rendering in cement mortar 1:3, after dismantling old unserviceable of tiles and screed bed, complete all as specified and directed. |
| 6 | S&F for pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of approved colour (multi colour as approved by GE) having tensile strength 550 Mpa as in roof bent to a curve of any radius as directed by GE fixed with self tapping screws including side end lap as per manufacturer's instructions including dismantling of old sheet of any description, complete all as specified and directed. |
| 7 | S&F of Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws incl dismantling of old sheet of any descriptional, complete all as specified and directed. |
| 8 | M&L for 16 to 18mm thick granite stone slab (of any type) work (table rubbed and polished) in cooking platforms, in steps, pillars, window cills, etc laid over 15mm thick bedding in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite slab, rounding edges etc after dismantling old unserviceable of granite stone slab of any size and screed bed, complete all as specified and directed. |
| 9 | Demolition of brick work or stone/ boulder or concrete block masonry including all quoins, arches, pillars, etc built in cement mortar, complete all as specified and directed. |
| 10 | M&L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc 6.00m mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 11 | All as per item No 10.00 here-in-before but except bricks. Note:- Brick retrieved from item No 8 will be re-used. |
| 12 | Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 13 | M&L for rendering 10mm thick on fair faces of brick work or concrete surface in CM (1:6), finished even and smooth without using extra cement, complete all as specified and directed. |
| 14 | M&L for rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4 on external brick work or concrete surfaces, finished even and smooth without using extra cement including mixing with liquid WPC all as per manufacturers instructions, complete all as specified and directed.(Note:- Cost of WPC shall be included in the in the qouted rate) |
| 15 | M&L for rendering 10mm thick in cement mortar (1:3) on soffits of slabs, chajja etc finished even and fair without using extra cement, complete all as specified and directed. |
| 16 | M&L for rendering 20mm thick on stone walls other than fair faces in CM (1:6), finished even and smooth without using extra cement, complete all as specified and directed. |
| 17 | M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over one coat of chalk whitening, complete all as specified and directed. |
| 18 | M&L for preparation of new plastered wall surface including cornices etc and applying two coats of exterior emulsion weather coat paint of apex ultima of ASIAN or equivelent make of any approved two or more colour (multi colour as approved by GE) pattern over and including a coat of primer, complete all as specified and directed. |
| 19 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed. |
| 20 | M&L for applying 2mm thick wall care putty on new plastered surfaces of walls/ ceilings to obtain a smooth surface including surface preparation and making good any undulations on the surfaces, complete all as specified and directed. |
| 21 | M&L for preparation of old wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 22 | M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 23 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exceeding 1.5 but not exceeding 4.0 sqm each including making good disturbed surface, complete all as specified and directed. |
| 24 | Taking down chowkhat or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) including making good disturbed surface, complete all as specified and directed. |
| 25 | M&L for factory made solid panel PVC door shutter 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, and jointing together with solvent cement, supplied & fitted in the frame at site as per specification & drawings shown in SSR Part-II, complete all as specified and directed. |
| 26 | S&F solid PVC door frame of size 90mm x 45mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification & drawing, complete all as specified and directed. |
| 27 | S&F factory Made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed. |
| 28 | S&F box type steel window with side hung shutters including box type hinges with steel handle, hold fast and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed. |
| 29 | S&F box type steel windows/ventilators with top hung shutters including hinges and handle with steel peg stay complete welded, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 30 | S&F box type steel windows/ventilators with top hung shutters including hinges and handle with steel peg stay complete welded, complete all as specified and directed. Please Enable Macros to View BoQ information |
