Tender For Certain B/R Work Services At Outside Location Under Ge(Af) No1 At Af Station Jamnagar.
Tender Value
30 Lakhs
Estimated cost
Bid Submission
07 Jul 2026
0 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jamnagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain B/R Work Services At Outside Location Under Ge(Af) No1 At Af Station Jamnagar.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 30-Jun-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 07-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engr-in-Charge. |
| 2 | S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge. |
| 3 | M&L for pre-painted galvalume aluminum Zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof ridges etc fixed with self drilling screws all as specified and directed by Engr-in-Charge. |
| 4 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge. |
| 5 | S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) (Fe-410-W(Gde-E-250) quality-B) including distance pieces, cleats etc complete all as specified and directed by Engr-in-Charge.. |
| 6 | S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed by Engr-in-Charge. |
| 7 | S&F rolled mild steel Fe 410-W (Gde-E-250) quality-B in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by Engr-in-Charge. |
| 8 | M&L for cement concrete Type C2 (1:3:6) (40mm graded aggregate) in foundations filling and mass concrete complete all as specified and directed by Engr-in-Charge. |
| 9 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-Charge. |
| 10 | S&F false ceiling of Non asbestos fiber cement building boards, manufactured from homogeneous mixture of cement, quartz and cellulose and cured with high pressure steam using auto claving process confirming to IS-14862, of size 600mmx 600mmx 4mm thick fixed over and including anodised aluminium powder coated (minimum thickness of powder coating 50 micron) snap grid frame work of T Section (main & cross member) of size 25mm x25mmx1.5 mm thick in square pattern of grid size 600x600mm. The aluminium frame work will supported on side wall with the used of alumminium 'L' section of size 25x25x1.5mm angles etc. Snap grid shall be supported with hangers of 4mm dia, galvanised iron wire adjusting level fixed to roof slabs/truss etc by means of ceiling cleats made out of galvanised iron flat of size 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed by Engr-in-Charge. |
| 11 | Taking down chowkhats or frames n.exc 1.5 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and directed by Engr-in-Charge. |
| 12 | Taking down chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and directed by Engr-in-Charge. |
| 13 | S&F of solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing in opening complete all as specified and directed by Engr-in-Charge. |
| 14 | S&F of factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel moulded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and directed by Engr-in-Charge. |
| 15 | S&F of 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed by Engr-in-Charge. |
| 16 | S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed by Engr-in-Charge. |
| 17 | M&L for cement concrete 1:2:4 type B1 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed. |
| 18 | S&F in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) three track window (two shutter glazed & one shutters wire gauge) with frame, glazed with 4mm thick tinted glass, and wire gauge with stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including rubber bead joining cleat for fixing in position, concealed type lock for all two shutter, PVC roller etc all as specified below, complete all as specifed including taking down old window. (a) Frame (top & side ) section shall of size 92.00x31.75x1.50mm (Section o 20831).(b) Frame (bottom) section shall of size 92.00x31.75x1.50mm (section No 20832).(c) Top & side members of shutter section shall be of size 18.00x40.00x1.55mm (Section No 20738).(d) Shutter interlock section shall be size 18.00 x 40.00x1.45mm (Section 20737)(e)Bottom members of shutter section shall be size 18x40.00x1.55mm (Section No 20736)Note : Section Nos given above are of make Jindal, contractor may use similar setion of other make mention in PS of CA. |
| 19 | S&F aluminium (powder coated with approved colour) ventilator, partially glazed and partially louvers, outer frame & mullion fabricated with alumimium section of size 82.50mm x 38.00mmx1.5mm thick (Cat No 20036), half portion glazed with 4mm thick frosted glass including rubber beading & glazing clip, half portion louvers of 80mm wide & 4mm thick frosted glass including alumimium louver patti including SS wire gauge of fixing of 0.36mm dia and 1.40 width of aperture with 25x3mm thick aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position including taking down old ventilator complete Note : Section Nos given above are of make Jindal, contractor may use similar setion of other make mention in Appx B |
| 20 | S&F in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutter with frame, partly glazed with 5mm thick tinted glass and partly panelled with 9mm thick prelaminated particle board with both side decorative laminated including rubber bead, joining cleat for fixing in position, aluminium door handle 150mm size, aluminium barrel tower bolt 200mm size etc including taking down of old frame with shutter of any size all as specified and directed. (a) Frame (top & side) section shall of size 101.60 x 44.75 x 2.4mm (Section No 14021)(b) Vertical members of shutter section shall be of size 85.00 x 44.45x2.00mm (Section No 19560)(c) Top members of shutter section shall be of size 83.50 x 44.45x2.00 mm (Section No 19596)(d) Lock rail (middle member ) of shutter section shall be of size 150.00x44.45x3.00 mm (Section No 19596)(e) Bottom member of shutter section shall be of size 150.00 x44.45x3.10mm (Section 19584)(f) Glazing clip for securing glass of shutters shall be of 0.80mm thick (Section No 19370).Note : Section No given above are of make Jindal, contractor may use similar section of other make mention in PS of CA. |
| 21 | S&F flush shutters 35mm thick solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed by Engr-in-Charge. |
| 22 | S&F 35mm thk 2nd class hard wood, plain framed, panelled shutters (any numbers of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkhats complete all as specified and directed by Engr-in-Charge. |
| 23 | S&F of 30 mm thick 2nd class hard wood glazed and Skelton shutters open rebated and prepared to receive glass, gauze etc. divided in to square with plain chamfered or rounded mitered and rebated sash bars, any numbers, edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc. size of members of shutters as per ISI and all as specified in SSR Pt – I, section -8 clause 8.24 (a), Supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge. |
| 24 | S&F 150mm long aluminium anodised barrel tower bolt of exturded section complete all as pecified and as directed |
| 25 | S&F 100mm long aluminium anodised barrel tower bolt of exturded section complete all as pecified and as directed |
| 26 | S&F of Aluminium handles, cast type anodised 150 mm complete all as pecified and as directed |
| 27 | S&F of Aluminium handles, cast type anodised 100 mmcomplete all as specified and directed by Engr-in-Charge. |
| 28 | S&F of Butt hinges medium weight cold rolled mild steel and fixed in 100 mm complete all as specified and directed by Engr-in-Charge. |
| 29 | S&F for Butt hinges, medium weight, cold rolled mild steel, and fixed, size of hinges in 75 mm, etc complete all as specified and directed by Engr-in-Charge. |
| 30 | S&F in repair Aluminium alloy anodised , sliding door bolts with hasp, staples (bolt type) and fixing clip of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed of size 300 mm complete all as specified and directed by Engr-in-Charge.. |
| 31 | S&F in repair mild steel 300 mm ordinary rat tail rod pattern springs mild steel, incl roller and roller plate complete all as specified and directed by Engr-in-Charge. |
| 32 | S&F in repair Aluminium (Die cast body) Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed by Engr-in-Charge. |
| 33 | M&L for Preparing new wood surface of any description over 10cm width or girth and applying two coats of synthetic enammel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge. |
| 34 | Demolition of brick work or stone masonry, built in cement mortar complete all as specified and directed by Engr-in-Charge. |
| 35 | M&L Precast cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in block masonry with soild bocks, exc 10cm width and set in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge. |
| 36 | Taking down cement plaster on brick wall, ceilings etc, racking out joints, hacking for key & scrubbing with water complete all as specified and directed by Engr-in-Charge. |
| 37 | M&L rendering 15mm thick in cement plaster in CM 1:6 on fair faces of brick or concrete, external surfaces of walls finished the surface fair and even without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 38 | M&L rendering 10mm thick in CM 1:4 on fair faces of brick or concrete, internal surfaces of walls finished the surface fair and even without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 39 | M&L for preparation of newly plastered or un plastered surfaces of walls and applying two coats of oil bound distemper over one coat of primer incl a coat of cement based wall care putty complete all as specified and directed by Engr-in-Charge. |
| 40 | M&L for preparation of old plastered or un plastered surfaces of ceiling and applying one coats of oil bound distemper complete all as specified and directed by Engr-in-Charge. |
| 41 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces (exterior weather coat) paint in normal/camouflage pattern as directed by Engr-in-Charge of any tint as approved over one coat of primer complete all as specified and directed by Engr-in-Charge. |
| 42 | M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide, zinc chrome primer complete all as specified and directed by Engr-in-Charge. |
| 43 | S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm and fixed with tinned tack orgalvanised wire staples complete all as specified and directed by Engr-in-Charge. |
| 44 | Hacking out old broken glass (any thickness, size quality or description) from wooden, steel or stone, concrete or brick sorrounds, glazed with putty or fixed with beads complete all as specified and directed by Engr-in-Charge. |
| 45 | M&L for 3 mm thick,Sheet glass,ordinary quality and glazing with oil putty wooden beads in square n exc 0.5 sq. m in each pane, etc completed all as specified. |
| 46 | Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes etc exc 250 lit and not exc 500 liters and writing date of cleaning with white paint on each tanks complete all as specified and directed by Engr-in-Charge. |
| 47 | Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes etc exc 500 lit and not exc 1000 litersand writing date of cleaning with white paint on each tanks complete all as specified and directed by Engr-in-Charge. |
| 48 | S&F in repair PVC ball valve 20 mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plasic ball screwed for iron pipe and fixed (minimum weight 15 gms- 142 gms) complete all as specified and directed by Engr-in-Charge. |
| 49 | Dismantling of PVC water tanks exe 250 ltrs n exe 500 ltrs,Complete all as specified and directed by Engr-in-charge. |
| 50 | Dismantling water tank any type and any position from site of capacity 1000 litres complete all as specified and directed by Engr-in-Charge. |
| 51 | S&F 500 ltr Rotaional moulded polyethylene water storage tanks cylindrical vertical with closed top hoisted and fixed in position complete all as specified and directed by Engr-in-Charge. |
| 52 | S&F 1000 Ltr Rotaional moulded polyethylene water storage tanks cylindrical vertical with closed top hoisted and fixed in position complete all as specified and directed by Engr-in-Charge. |
| 53 | Taking down15mm bore steel tubing and connections in any position,Complete all as specified and directed by Engr-in-charge. |
| 54 | Taking down20mm bore steel tubing and connections in any position,Complete all as specified and directed by Engr-in-charge. |
| 55 | S&F GI tube 15mm dia midium graded with all fitings to wall, celing or laying in trenches complete all as specified and directed by Engr-in-Charge. |
| 56 | S&F GI tube 20mmdia medium grade galvanised, with all fitting and fixed to walls and ceilings or laid in floorscomplete all as specified and directed by Engr-in-Charge. |
| 57 | Supplying and laying of 20 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified including taking down old pipes complete all as specified and directed by Engr-in-Charge. |
| 58 | S&F in repair Vitreous china wash basin, white flat back , size 550x400mm with padestal excluding taps, waste pipe but including waste cupling of PTMT of 32mm bore dia incl brackets etc complete all as specified and directed by Engr-in-Charge. |
| 59 | S&F in repair pillar tape 15 mm CP fancy type with capstan heads , screwed down high pressure with or with out lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipes and fixed complete all as specified and directed by Engr-in-Charge. |
| 60 | S&F in repair vitrious squating pan orrisa pattern Size 580 x 440 mm white with integral foot rest including P or S trap and connection to pipe, complete all as specified and directed by Engr-in-Charge. |
| 61 | S&F in repairs for vetrious china wash down water closet pan of padestel pattern white with P or S trap including , seat cover etc complete all as specified and directed by Engr-in-Charge. |
| 62 | S&F in repair Toilet paper holder of vitreous china coloured fixed to walls with chromium plated (CP) brass screws, complete all as specified and directed by Engr-in-Charge. |
| 63 | S&F in repairs plastic water closet seat, closed pattern with flat bottom and cover and mild steel chromium plateed or aluminised hinging device complete all as specified and directed by Engr-in-Charge. |
| 64 | S&F in repair PVC valve less syphonic action low level Flush 10 Ltr capacity complete all as specified and directed by Engr-in-Charge. |
| 65 | S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed by Engr-in-Charge. |
| 66 | S&F in repair Bib taps 15 mm chromium plated long body complete all as specified and directed by Engr-in-Charge. |
| 67 | M&L for Bib taps, chromium plated with fancy type, screwed down, screwed for iron pipe or for brass ferrule and fixed, Bore dia of pipe in 15 mm, etccomplete all as specified and directed by Engr-in-Charge. |
| 68 | S&F in repairs stop cock chromium plated fancy type15 mm dia complete all as specified and directed by Engr-in-Charge. |
| 69 | S&F in repair Angle Stop valves fancy type brass chromium plated with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed 15mm dia pipes, complete all as specified and directed by Engr-in-Charge. |
| 70 | S&F in repair 20mm bore dia Gun metal Gate valve with iron wheel head screwed both ends for iron pipe or for union,complete all as specified and directed by Engr-in-Charge. |
| 71 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engr-in-Charge. |
| 72 | S&F in repair looking mirror of selected quality size 600 x 450mm mounted on PVC/ Aluminium frame ,fixed to wooden plugs with chromium plated brass screws complete all as specified and directed by Engr-in-Charge. |
| 73 | S&F in repair tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges of Aluminium anodised complete all as specified and directed by Engr-in-Charge. |
| 74 | S&F in repair Vitreous China half stall urinals, (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed by Engr-in-Charge. |
| 75 | S&F in repair Waste coupling of PTMT suitable for urinals, (Minimum weight 32mm-45gms complete all as specified and directed by Engr-in-Charge. |
| 76 | S&F in repair Kitchen sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including necessary PVC outlet pipe and coupling complete all as specified and directed by Engr-in-Charge. |
| 77 | S&F in repair s/s Grating 100mm dia complete all as specified and directed by Engr-in-Charge. |
| 78 | S&F in repair 75mm dia Cast iron Floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engr-in-Charge. |
| 79 | S&F in repair s/s Grating 75mm dia complete all as specified and directed by Engr-in-Charge. |
| 80 | S&F in repair waste Pipe (32/40mmdia) suitable for urinals,Wash Basin and Sinks complete all as specified and directed by Engr-in-Charge. |
| 81 | S&F in repair hand shower (Health Faucet) CP with inner flexible tube with wall hook complete all as specified and directed by Engr-in-Charge. |
| 82 | S&F in repair plastic sheet covers for water tank, black,closed pattern complete all as specified and directed by Engr-in-Charge. |
| 83 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed by Engr-in-Charge. |
| 84 | M&L non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, over 15 mm thick cm (1:6) in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles complete all as specified and directed by Engr-in-Charge. |
| 85 | M&L non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding .18 sqm, over 15 mm thick cm (1:6) in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles complete all as specified and directed by Engr-in-Charge. |
| 86 | M&L for dark shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, over 15 mm thick cm (1:6) in floors etc in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge. |
| 87 | M&L glazed ceramic tiles in veticle surfaces 350x 250x7mm/ 450X 350X 7mm thick set and joint in neat cement slurry on 10mm thick plastering in CM 1:4 and pointed in white or colour cement to match complete all as specified and directed by Engr-in-Charge. |
| 88 | M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like set and jointed in cement paste including backing coat in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr-in-Charge. |
| 89 | M&L for repairing the edge / corner of Chajja / roof projection and similar work by removing plaster width / girth exc 200mm but not exc 300mm and making good with 10mm thick rendering in cement mortar 1:3 to match with existing surface complete all as specified and directed by Engr-in-Charge. |
| 90 | S&F PVC (SWR) pipes 110 mm bore, single socketed in any length with rubber ring joints fixed to walls including taking down old pipe complete all as specified and directed by Engr-in-Charge. |
| 91 | S&F PVC (SWR) pipes 75 mm bore, single socketed in any length with rubber ring joints fixed to walls including taking down old pipe complete all as specified and directed by Engr-in-Charge. |
| 92 | Removal of existing roof treatment consisting of screed bed, tar felts of any description etc, and removal of debris out side MD land complete all as specified and directed by Engr-in-Charge. |
| 93 | M&L for screed bed or bedding layer of mortar 10 mm thick in cement mortar 1:4 including mixing only liquid water proofing compound as per manufacturers' instructions and finishing the surface fair and even complete all as specified and directed by Engr-in-Charge.Note:- WPC will be measured & Paid separately |
| 94 | Supply only liquid water proofing compound |
| 95 | Material and labour for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified complete all as specified and directed by Engr-in-Charge. |
| 96 | Demolition of concrete (un-reinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) including removal of debris to a distance exc 1.5 km but n.exc 2 km complete all as specified and directed by Engr-in-Charge. |
| 97 | Demolition of laid dry or laid dry and pointed Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed by Engr-in-Charge. |
| 98 | M&L for 75 mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) in sub-floors, sub-bases, floors and pavings etc complete all as specified and directed by Engr-in-Charge. |
| 99 | M&L for sand cushioning 25mm thick over concrete surfaces, spread complete all as specified and directed by Engr-in-Charge. |
| 100 | M&L for machine pressed precast concrete interlocking paver block of approved shape and size of 60mm thickness, with minimum compressive strength of 35N/sqm (M-35), without correction factor for chamfering, made in rubber moulds with 0.50mm thick scratch proof lacquer coating on top surface, with grey cement and pigment laid complete all as specified and directed by Engr-in-Charge. |
| 101 | Demolition of existing concertina coil of any dia from top of the Boundary wall complete.(Note : Length will be measured as length of Boundary wall to be demolished) complete all as specified and directed by Engr-in-Charge. |
| 102 | S&F concertina coils 600mm dia after stretching with five Nos clip and pitch between the barbs 24.5mm etc complete all as specified and directed by Engr-in-Charge. |
| 103 | S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc(each line wire to be measured).complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 07, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayJul 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender