|
| 1 | Taking down chowkats or frames not exceeding 1.5sq.m. each with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 2 | Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each with shutters without taking off shutters from frame complete all as specified and directed. |
| 3 | Taking down Shutters any description exc 1 sq. m and n exc 2 sqm each complete all as specified and directed. |
| 4 | S&F factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of m.s tubes for top & bottom rails m.s frame shall be covered with heat moulded plain colour pvc 'c' channel having a pvc sheet strip of 20mm width struk inside with salvent cement for stiles and plain colour pvc sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour pvc sheet to be fitted in the m.s frame welded / sealed to the stiles & rails with suitable pvc sheet beading , and joined togeather with salvent cement , suppling & fixing in the frame at site as per soecification & drawing complete all as specified and directed. |
| 5 | S&F solid pvc door frame of size 50mm x 47mm made out of 5mm plain colour pvc sheet reinforced with m.s square tube , suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 6 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window / Ceosetory windows & other Frames/Chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum comp?ressive strength of58N/mm2,modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property ofbeingtermite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs /SS dash fasteners shall be paid for separetly complete all as specified and directed. |
| 7 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x 100mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum comp?ressive strength of58N/mm2,modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property ofbeingtermite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs /SS dash fasteners shall be paid for separetly complete all as specified and directed. |
| 8 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunkS.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 9 | S & F mild steel bands, straps, supports or stays of rain water, ventilating pipes including bolts, hooks (stay) for large gates, hook and pintel hinges, clamps, hold fasts, wall ties, flat iron fillets for securing wire mesh, wind tie, fan hook and similar work including necessary drilling bolting or riveting etc conforming to Fe – 290 Gde E – 165 complete all as specified and as directed. |
| 10 | S & F 35 mm thick factory made second class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc [without sash bars] edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, size of members of shutters shall be as specified in SSR Part-I, Section 8, Clause 8.24 (a) supplied and fitted to chowkat complete all as specified and as directed. |
| 11 | S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators, etc., with one or more rebates including joining cleat for fixing etc., complete all as specified and directed. |
| 12 | S & F Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, EPDM rubber packing, anodised aluminium snap beading, screws etc. and anodised aluminium fittings such as peg stay 150mm long (01 No), hinge type B-21, 100mm long (02 Nos) and suitable size of handle complete all as specified and directed. |
| 13 | S&F 100 mm long extruded aluminium alloy handles, fabricated type, anodized complete all as specified and directed. |
| 14 | S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodized complete all as specified and directed. |
| 15 | S&F 100 mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and directed. |
| 16 | S&F 150 mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and directed. |
| 17 | S&F 100 mm long medium weight,stain less steel butt hinges complete all as specified and directed. |
| 18 | S&F 125 mm long medium weight,stain less steel butt hinges complete all as specified and directed. |
| 19 | S&F in repairs floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm complete all as specified and directed. |
| 20 | Supply only 5.5 mm thick, sheet glass, ordinary quality and glazing with rubber beading in square exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 21 | Supply only Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 22 | S&F in repair 300mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 23 | S & F in repair 300mm Mild Steel, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 24 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.[Ground floor to 10th storey] complete all as specified and directed. |
| 25 | S&F 4.8 mm thick, sheet glass, ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 26 | M&L for antitermite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same® complete all as specified and directed. |
| 27 | Demolition of Brickwork or stone/bou-lder masonry, built incement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 28 | M&L for Brickwork with fly ash bricks modular bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed. |
| 29 | Taking down cement plaster of any description on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.(Note: Necessary scfolding , safety belts as required for plastering work at any height to be provided by the contractor without any extra cost to the Government ) . |
| 30 | M & L for rendering 15 mm thick in two coats (10mm+5mm each) on other than fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with integral water proofing compound with weight of cement in top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note: Water profing compound to be measured and paid separately.) |
| 31 | Supply only Integral waterproofing compound complete all as specified and directed. |
| 32 | M&L for rendering 10mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed. |
| 33 | S & F Aluminium powder coated windows frame with shutters sliding pattern consisting of three tracked frame and 03 shutters (2 shutters glazed shutter and 1 gauged shutter) using standard medium weight section of weight not less than 0.55 Kg/RM including glazing with and including 5 mm thick sheet glass and stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with suitable EPDM rubber beading including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, powder coated aluminum snap beading screws,handle ,locking arrangements etc complete all as specified and directed. |
| 34 | S&F in repair Aluminium alloy wire cloth,0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed. |
| 35 | S & F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. |
| 36 | Repairs to existing alluminum window shutters by tightneing of joints by nuts and bolts wherever required including renewal of worn out hings, handles, rollers, clips, beading etc complete all as specified and directed. |
| 37 | S&F in repair 18 to 19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work and providing with 6mm thick teakwood lipping alorund all as specified and as directed. |
| 38 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 39 | S&F factory made ready to install non toxic-lead & cadmium free, single extruded 3 side prelam Solid (non hollow) PVC door frame (single rebeated) of size 75x50mm it should be winer proat, bermite proof. Sre retardent and with excelent scriw holding capacity Mired cut at two comers and joined with MS Screws on each side The sold PVC door frame shall be fixed to the existing wall using (10x100mm) long MS screws to through the frame by using PVC fastners minimum of 4nos of MS screws to be provided for each vertical post and minimum of 2 nos of MS screws to be provided to horizontal members(head & bottom frame) complete all as specified and directed. |
| 40 | S&F 18mm thick, factory made ready to install, Non-toxic, Lead & Cadmium free, single extruded, water proof, termite proof, fire retardant, excellent screw holding capacity, solid PVC board, one side decorative choice lamination and other side balancing white as in cupboard shutter, fixed to door frame with and cold rolled nickel plated steel 'O' crank soft closing concealed hinge (15-22mm) 8 Nos for bottom portion 4 Nos for loft above including necessary fixing arrangement, bright finish or Electrogalvanized and width of flaps 40mm (when open) and stainless steel screw complete all as specified and directed. |
| 41 | S&F 18mm thick, factory made ready to install, Non-toxic, Lead& Cadmium free, single extruded, water proof, Termite proof, fire retardant, excellent screw holding capacity, solid PVC board, one side decorative choice lamination and other side balancing white as in cupboard shelves fixed to and including PVC guide rail suitable size and stainless steel screw complete all as specified and directed. |
| 42 | S&F in repair stainless Steel Curtain Rod of 25 mm dia including Stainless Steel Brackets of size sutable to 25mm dia curtain rod as in Coat Hanger complete all as specified as directed |
| 43 | S&F in repair 150 mm long designer SS pull handles fabricated type,with fixing accessories of standard grade for cup board shutter complete all as specified and as directed |
| 44 | S&F in repair 100 mm long designer SS pull handles fabricted type with fixing accessories of standard grade for cup board shutter complete all as specified and as directed |
| 45 | S & F in repair Magnetic Catches with Striking Plate, 40 mm size superior quality suitable for Cupboard shutters complete all as specified and as directed. |
| 46 | S&F in repair Continuous (piano) hinges, mild steel, bright finish or electrogalvanised Width of flaps (when open) in 30 mm complete all as specified and directed. |
| 47 | S&F in repair 100mm Hasp and staple, safety type, aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 48 | M&L for PCC 1:3:6 type C1 (using 20mm graded granite stone aggregate) in bed blocks etc., including necessary form work complete all as specified and directed. |
| 49 | S & F In repairs, aluminium bottom strips for entrance doors, Minimum 0.5mm thick, 20 to 25mm wide to arrest entry of insects including fabric dust remover fixed at the bottom of the strip complete all as specified and as directed. |
| 50 | M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer complete all as specified and directed. |
| 51 | M&L for preparation of newly plastered wall surface and applying two coats of distemper oil emulsion over a coat of primer over 1mm thick wall care putty [any number of coats required] complete all as specified and directed. (Note :- Distempering work shall be carried out acoording to Smart Painting procedure mentioned in PS) |
| 52 | M&L for preparation of old decorated, damp affected wall surface by complete removal of existing treatment, washing, rubbing, stopping etc and apply the following treatments :- (a) Apply injection sealer by providing holes of 6mm dia and 50 mm deep at an angle of 45 degree. (b) Apply a coat of advance dammp proof protective wall sealer (c) Apply one or more coat of water proof putty to a smooth surface including making good any undulations on the surfaces (d) Apply a coat of acylic primer over the putty surface (e) Two coats of oil bound washable distemper complete all as specified and as directed. Make : Berger,Asian Paint, J&N ,Shalimar Note :- (i) Painting work shall be carried out according to Smart Painting procedure mentioned in PS (ii) Sanding of surfaces shall be done by mechanical sander with 1500-2700 rpm with internal dust extraction system for a clean environment certified by the Paint manufacturer) |
| 53 | M&L for preparation of new platered surface of wall and applying two coats of weather proof 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre, having dart pick up resistant, silicon enhanced, UV resistant and PU enhanced property over a coat of alkali resistant primer including applying one or more coat of wall care putty to a smooth surface including making good any undulations on the surfaces including all necessary scaffolding,complete all as specified and directed. Note :- Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS |
| 54 | Taking down, Resecuring or easing & adjusting and refixing in the same opeing shutter of any description exc 1 Sqm but n. exc 2 Sqm each including refixing builder's hardware as required and replacement of screws etc complete all as specified and directed. |
| 55 | S & F 30 mm thick, factory made,Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed. Please Enable Macros to View BoQ information |
